vibration conveyor mill used for sale

Control system Heidenhain TNC 415 Spindle diameter 130 mm Tapered hollow spindle ISO 50 Spindle speed range 10 to 1500 rpm Table transverse (X): 3500 mm Rolling headstock stand for (Y): 2000 mm Longitudinal displacement rack (W): 1250 mm Eject working spindle (Z): 800 mm Table load 12 000 kg Machine weight: 36 000 kg

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

TOS WHN 130 MC used machine Specifications System Heidenhain TNC 426 Working range Spindle diameter 140 [mm] Taper in the spindle ISO 50 Table transverse adjustment (X) 3000 [mm] Vertical headstock adjustment (Y) 2000 [mm] Vertical travel (Z) 1250 [mm] Spindle stroke (W) 560 [mm] 2X Clamping surface 1800 x 1600 [mm] Speed range 10 - 2500 [rpm] Main motor output 37,0 [kW] Max. workpiece weightƒ 8000 [kg] Accessories Tool changer for 60pcs Tool cooling Chip conveyor

Technical data Spindle dia 125mm ISA 50 taper stroke of the spindle 800 mm cross travel of table X 1200 mm vert. travel of headstock Y 1400 mm longit. ztravel of the table Z 1620 mm spindle speed infinitely variable 3,5-700 rpm table size 1200 x 1400 mm table load 6000 kg main motor DC 19 kw total input 22,79 kW spindle feed inf. variable 0 - 1,25 mm/rot working feeds inf. variable 0,3 - 1700 mm/min rapid traverse 2250 mm/min fine feed 3mm/min dimension LxWxH 7,4 x 4,8 x 3,6 m weight of the machine 21000 kg DRO Heidenhain

U5 Lab Package For Pilot & Development Construction: 305 stainless steel with 316L stainless steel product contact parts. Surface Finish: Product contact surfaces mirror polished (Ra 0.10 micron), non-contact surfaces 150 grit (Ra 1.06 micron); welds cleaned and polished and all material contact welds ground flush and polished. Infeed Opening: 3.25" (83 mm) diameter with grid bars to prevent operator access to the rotating impeller. Infeed Chute: Hand-fed funnel, 6.4" diameter x 5" high (163 mm x 127 mm) with magnetic actuated safety interlock. Spindle Assembly: Sanitary pharmaceutical duty with pre-lubricated, sealed bearings, viton O-ring, two shaft seals, and double varilip seal in a stainless casing. Also suitable for use with vacuum. Impeller Speed: Approximately 1000 - 6500 RPM. Capacities: Varies based on tooling, feed and speed used. Discharge: 6" (152mm) tri-clamp di ...

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

Complete grain mill for sale for about 75 tons per day. Rollermills Bühler MDDK Plansifter MIAG LM The plant has been professionally dismantled. All machines have been overhauled. With switchgear and PLC control.

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 extra cost milling head IFH 1 and IV25, IFW 1, IFW2 IFW 3 NO floor plates

W100A Parameters 100mm, 1600mm Diameter of working spindle 100 mm Taper in spindle morse 6. Longitudinal adjustment of table (z) 1450 mm Cross adjustment of table (x) 1600 mm Motion of work head on frame (y) 1120 mm Slip out of working spindle (w) 900 mm Clamping area of table 1250 x 1250 mm Dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14 000 kg Accessories: face plate, tail stock

Used hammer mill made by Alpine, type B 630. Manufacturer's documentation.

Qty. 1 Second-hand 4 stands cold rolling mills – 4-Hi Mfc.: Fröhling Built: 1969 Revamped hydraulics: 1984 Dismantled and in storage 2018 Rolled material: Alloy AA5050, AlMg3 (Series 3000 & 5000) Type: 4-Hi Strip width max.: 282 mm Thickness: in 2.0 mm out 0.25 – 1.20 mm Speed max.: 400 m/min

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

EXTRON L610 CNC vertical machining center was built in 2008 in Taiwan. Distinguished by its extensive machining capabilities, high precision and reliable components, the machine is ideal for every production facility, even during the most intensive and demanding challenges. The high-quality design with sliding doors additionally efficiently dampens any vibrations and ensures maximum process stability. The EXTRON L 610 milling center machines workpieces on a large T-slot table using reliable tools placed in a 20-position head and a powerful spindle rotating at a maximum speed of 8000 rpm. All process parameters are programmed in the intuitive FANUC Series 0i-MC CNC control with many useful features that minimise the operator’s need to operate the machine. The EXTRON machining center weighs 5750 kg. Technical data of the EXTRON L610 CNC milling machine - CNC controller: FANUC Seri ...

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Grinder mill with open rotor blades, cutting chamber: 430x200 mm, motor: 5.5 kw. With electrical panel. We offer a highly efficient shredder mill with blades and open rotor, designed to optimize the reduction of plastic materials. Our machine features a 430x200mm cutting chamber and a 5.5 kW motor that ensures solid performance in plastics processing. In addition, we include an electrical panel that facilitates the control and safe operation of the machinery. At [Your Company], we are committed to providing state-of-the-art solutions for the thermoplastics management and recycling industry. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

AVIAN Engineering Model G46/ 60 Pinch Infeed Rollers Integral Blower Main Motor 20 kW Blower Motor 2 kW Rotary Blade 6pcs Stationary Blade 4pcs ThruPut 300 KG/H Cutting Chamber 620 x 460mm Hopper Opening 620 x 500mm

ID2430 Waagner Biro Wet Ball Mill 260 x 550 cm year/Year of construction 1987 52 t Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, ground material: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, rubber Skega armor Wet ball mill, overflow ball mill, drum diameter 2600 mm, grinding track length 5500 mm, regrind: limestone 0-10 (16 mm), wet grinding process, 2-stage cyclone circuit, nominal grinding capacity: 12-22 t/h, filling weight max./normal: 44/39 t, installed engine power: 450 KW, armouring rubber skega

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

x-400,y-330,z-350,angle table 630x335,SK 40, 40-6,000 rpm,measuring probe

Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Hammer mill Fa. Wery

Qty. 1 Second-hand Sendzimir rolling mill Mfc.: INNSE Type: ZR-22- 49” Built: 1960’s Strip width: 1270 mm Thickness Entry: 5.0 mm Exit: 0.4 mm Mill motor: 1640 kW, 2200 HP Qty. 2 Reel motors: 932 kW, 1250 HP Rolling speed: 0 – 163/288 m/min. Max. coil dia.: 1574 mm Winder mandrel dia.: 610 mm Coil weight: 21 Tons Max. tension: 300 kN Max. roll separating force: 6000 kN Work rolls dia.: 48-61 mm

Complete mill / mill plant with a capacity for the production of 100 tons of flour/24h consists of: Grain cleaning systems, bucket elevators, conveying augers, stainless steel pipe systems, etc. The automated mill has been continuously modernized and expanded. 1 Airtronic roller mill, made by Bühler 1 top-mounted filter, made by Bühler 1 Dust cleaners 1 double screening machine, Fbrikat Bühler 3 MJZF, make Bühler dissolver, total 7 metal silos for grain Conveyor systems and stainless steel pipe systems 1 Compressor systems Laboratory equipment consisting of: 1 glue washer 2 Perten Inframatic 8600 1 case counting device 1 gluten index device 1 Schlagkreuzmühle To the flour store: Storage cells 6x 7.5 tons Storage cells 2x a 25to 1x 15to -------------------- Elevators: 3x A 75to  ...

Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg

1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...

5 Qty. 1 Continuous 6 Stand Cold Rolling Mill Mfc.: Fröhling Built: 1984 Type: 4-Hi Strip width: 220 mm Thickness: 0.15 – 2 mm 8 Qty. 1 Strip welding machine (Cold mill) Mfc.: A.I. Welders Built: 1986 Rev. in 2002 Speed: 75 – 600 m/min. Width: 233 mm Thickness: 0.175 – 2.0 mm 9 Qty. 1 Induction Treatment Furnace (Cold mill) Mfc.: Otto Junker Built: 1986 Width: 220 mm Thickness: 0.175-2.0 mm Speed: 8-60 m/min. Temp.: 550 °C 10 Qty.1 Quenching unit (Cold mill) Mfc.: Otto Jumker Built: 1986 Flow: 95 m³/h Temperature: 29 °C Size: 1.2 x 1.2 x 2.8 m 11 Qty. 1 Rotary shear (Cold mill) Mfc.: HDE Built: 1996 Strip width: 220 mm Thickness: 0.1 – 0.95 mm

Greerco High Shear Division, USA No. 3-23422 Power: 7.5 kW, ABB with funnel, circulation line, three-way valve on a stable mobile stainless steel frame Machine as good as new, unused Dimensions LWH: 700 x 700 x 1700 mm with double jacket for heating and cooling Weight: approx. 180 kg

Peforated disc mill Manufacturer: Fryma Type: ML 180 No.: M10451 Power: 7.5 kW with hopper (volume: ca. 100 l) with feed screw (speed-controlled) on mobile cart with control cabinet LWH: 800 x 700 x 2400 mm Weight: ca. 250 kg

No.: 851275 with speed-controlled feed pump Funnel in Exx protection with switchgear good condition Dimensions LWH: 700 x 700 x 700 mm Weight: approx. 100 kg

No.: 56218 Power: 4 kW with hose pump and control cabinet highly specified, as good as new

Demo Machine Specifications:  Dimensions - 1300 x 1560 x 1210 mm, (with built-in drive and control cabinet)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  External dimensions of the mill drum - Ø870 x 1120 mm,  Distance between bearings - 1260 mm,  Height of the drum axis - 860 mm,  Operating capacity - 600 dm3,  Weight of the machine - 641 kg,  Installed power - 5.5 kW,  Input voltage/frequency - 400V/50Hz,  Connector - 32A; 400 V  Milling time range - 1s... 99h59min,  Mill installed on a steel frame,  Drum made of 10 mm steel without inner lining. including first filling 80 mm steel balls Technical specification:  Dimensions - 1300 x 1560 x 1210 mm, (with drive and control cabinet installed)  Dimensions of the packed machine - 1500 x 1800 x 1320 mm,  Mill drum external dimensions - Ø870 x 1120 mm, � ...

No: M17822 Y.O.M.: 1998 Double-acting mechanical seal Locking pressure station Stainless steel speed-controlled feed pump Dimensions LWH: 1200 x 1900 x 1100 mm Weight: approx. 500 kg

N°: 42969/00 Y.O.M.: 2000 Power: 3.37 kW total Pressure product room: 2 bar pressure-monitored, temperature-monitored Material Product space: Alumium oxide ceramic Feeding pump, hose pump, speed-controlled Rotor speed-controlled Machine unused and as good as new Dimensions LWH: 1000 x 500 x 800 mm Weight: approx. 300 kg

Edge thickness max mm: 3 Workpiece thickness max mm: 60 Total connection kW: 1.1 Weight Kg: 110

No.: 16965 Y.O.M.: 1996 Power: 46 kW total Pressure product room: 4 bar Pressure double coat: 2 bar Temperature max: 130°C Stainless steel version, Pharma water-cooled engine Double-acting mechanical seal with locking pressure station overhauled, very good condition Dimensions LWH: 2000 x 1700 x 2200 mm Weight: approx. 1.4 t

PVS 150 V Multicut with 15 to 22 KW with combinable cutting systems Rotor/ stator non-contact Hole disc with knife head or rotor/stator with perforated disc system 2 cutting stages

Mikron Milling Machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box

XYZ SMX 5000 CNC bed milling machine was built in 2016 in the UK. The machine for precision machining of workpieces with a maximum weight of 850 kg is made from a uniform cast iron, which guarantees excellent rigidity and stability during even the most intensive machining. The enclosed workspace includes a large work table with a length of 1930 mm and a width of 355 mm, a reliable spindle and a tilting work head. All this is complemented by a CNC control with integrated CAD functions, which significantly simplifies everyday machining. The XYZ Machine Tools SMX 5000 CNC milling machine weighs 3570 kg. Technical specifications of the XYZ SMX 5000 milling machine - feed in the X/Y/Z axis: 1500/600/580 mm - rapid traverse in X,Y,Z axis (CNC): 6.3 m/min - rapid traverse in X,Y,Z axis: 3.8 m/min - work table dimensions (L x W): 1930 x 355 mm - maximum workpiece weight: 850 kg - number ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. The machine on offer is like new, it has never worked after a trial run. The machining process is performed on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSo ...

Y.O.M.: 1991 Machine No.: M15177278 Power: 18.5 kW with funnel, circulating line with three-way valve LWH: 800 x 600 x 1600 mm Weight: approx. 250 kg Attention: no mechanical seal included, can be reinstalled upon request

Machine No.: 2009.14 Power: 5.5 kW Pharmaceutical version as good as new Stainless steel with funnel (approx. 60 l) Switchgear EEx various spare parts, new cross-toothed grinding set LWH: 800 x 700 x 1400 mm Weight: approx. 120 kg

Key data: 100 mm, 1600 mm, 1250 mm

DRO , TABLE 1250 X 1250

Factory number: 78046 Power: 24 kW Engine in EEx Switchgear not in EEx with funnel and chute Operating Instructions, spare grinding set LWH: 700 x 700 x 1500 mm Weight: approx. 300 kg