vertical machine center used for sale

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

Key data: 3300 mm, 2300 mm, 1000 mm

Control Siemens 840D Table size 3,500 x 1,250 mm X-travel (longitudinal) 3,300 mm Y-travel (cross) 2,300 mm Z-travel (vertical) 1,000 mm Spindle HSK 100 Rapid traverse X-axis 25m/min Rapid traverse Y-axis 40m/min Workpiece weight 9.000 kg R.P.M. 100 – 12,000 kW 70 Volts 400 Cycles 50 Including: Automatic Tool Changer 60 tools Rotating B - C axis head: B-axis +/- 95 degrees – C-axis +/- 190 degrees.

CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Key data: 11000 mm, 3000 mm, 1500 mm

X axis 11.000mm Y axis 3.000mm Z axis 700mm W axis 800mm Spindle diameter 160mm Spindle taper iso 50 Spindle speed 1.800 rpm Spindle power 65kw ATC 60 positions Yom 1995 Nr 02 rotary table:-2.500x2.500mm capacity 25 ton ( 2 axes controlled) -2.000x2.000mm 15 tons capacity ( 2 axes controlled) One birothative head Two boring heads Floor plates included

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Width of plate,mm 3000 Thickness of plate,mm 66-150 Description Hot and cold bending Force: 2200t Main roll: 860mm Changeable roll: 500mm Width: 3000mm Bending by circle arc Cold bending: 66mm Hot bending: 150mm Min diameter of cylinder: 1000mm Bending at the angle Cold bending: 30mm Hot bending: 60mm Internal bending radius: 60m weight: 100t

Used machine in good condition. Available for immediate delivery. - Control: SIEMENS 840 D - Axes: 2 - Cutting feed rate (X x Z): 0.1 - 3.000 mm / min - Power of driven tool: 37 kW - Weight: 25 t

Used machine in good condition. Available for immediate delivery. - Power source : 30 kVA - Control: CNC HEIDENHAIN TMC 530 - Tool magazine capacity: 20 # - Maximum tool diameter ?: 65 mm - Weight: 7.5 t

Used machine in good condition. Available for immediate delivery. - Control: SINUMERIK 880 T 3 - Max. length: 400 mm - Tool-holder cone: CONO ISO 50 - Tool magazine capacity: 16 #

- Including YUDO SIGMA 800cs robot - Clamping force: 3.000 kN

Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 A Serial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Stehendbogenauslage / Vertical Press-Stacker Delivery MBO SBAP 46-ME Baujahr / Year 1994 - Serial-No. 940114747 Arbeitsbreite mit ME max. 430mm / Working width with ME max. 430mm Bogenlänge / Sheet length min. 80mm Bogenlänge / Sheet length max. 300mm Stapellänge / Pile length max. 730mm Einlaufhöhe / Infeed height min. 380mm Einlaufhöhe / Infeed height max. 950mm Pressdruck / Pressure 20.000 N Mechanische Geschwindigkeit / Mechanical Speed max: 30 – 160 m/min Eigensteuerung // SelfControl Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vertikalstapelauslage - Vertical Stack Delivery with Pressing and Marking Device MBO SAP46L Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.1 Year 1996 - Serial-No. 79719/96-239513 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vertikale Pressauslage / Vertical Press Delivery MBO FA 82-ME Navigator Year 2010 - Serial-No. 104197100101 Arbeitsbreite / Working width max. 820mm mit integrierten Presswalzen / with intergrated press rollers mit Markiereinrichtung / with Marking Device ME Navigator Control Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66.D+MKE Year 1998 - Serial-No. 101486/98-256505 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Inclination: 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Bsjuxvmq0O3 Saw blade speed 25-115m/min Butt welder capacity 3-16mm Engine Size: 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Circuit breaker Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welding machine, blade shears and grinding machine Nuttisch Low-voltage halogen lamp Mitre protection for oblique cuts Quick-gap stop for straight cuts

Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, Vertical machining center - 2-pallet, Daewoo ACE VC500, CNC Model Fanuc, CNC version 18-M, Spindle Taper toolholders iso 40, Power spindle 15 Kw, RPM 10000, Number of tools 30, X-axis travel 760 mm, Y-axis travel 510 mm, Z-axis travel 570 mm, Changer pallet yes, Pallet dimensions 860x560 mm, Maximum load allowed 300 Kg, Swing type pallet yes, High coolant pressure yes, Cheap conveyor yes, Brand Daewoo, Model ACE VC500, Construction year 2000, DIMENSIONS AND WEIGHT, Length 3600 mm, Width 3700 mm, Height 2935 mm, Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped  ...

Vertical machining center LEADWELL MCV 610 CR CNC Fanuc 0M X 610 Y 510 Z 410 6000RPM ISO 40 The machine is in our warehouse in Gussago BS, under power Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 610, Y axis: 510, Z axis: 410, CNC type: Fanuc, Spindle revolutions: 6000

Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, CNC type: Fanuc 21iM, 2 pallets: Yes, Number of pallets: 2, Spindle speed RPM: 15000

Vertical Clamp Set, Vertical Toggle Clamp WMW A63 TGL 34181 Height under clamping arm: 63 mm Clamping arm length: 125 mm Clamping arm opening angle: max. 105 ° Vertical clamp set consists of 5 vertical clamps ! New !' Dimensions(per clamp): 200 x 60 x 280 mm Dimensions: 300 x 180 x 280 mm

turning diameter: mm swing diameter: mm turning height: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

Chiron FZ18W Magnum, rotopallet, 1999, CNC Siemens 840D, X 630 Y 400 Z 425, tables (2) 850x450mm, 20 tools, ISO 40 / 18kW / 140 Nm, 40m/min, HAWE hydraulics, automatic doors, swarf conveyor, 6 ton, 3,6 x 2,25 x 2,85, machine can be inspected under power in our warehouse, Mimu Machine Tools (Italy)

CHIRON MODEL FZ18W MAGNUM 4 axis Vertical machining center with rotopallet and double 4th axis 20 TOOLS ISO 40 Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kW X = 625 Y = 400 Z = 400 Rapids 40m/min Table area: 2 x 900 x 470 - TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos. - original HAWE hydraulic unit - FANUC 0M 1995 Can be inspected under power in our warehouse Mimu machine tools (Italy), X: 625, Y: 400, Z: 600, 4th axis: Yes, (2x) Tsudakoma 360 000 pos.

STAMA MC325 / S 2-palllet Double fourth axes Spindle 9000 rpm / 36 tools priced to sell low price - good deal The machine is visible in our warehouse in Gussago BS., Mimu Machine Tools, Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets, CNC type: Siemens, Fourth axis: 2 + 2, Number of pallets: 2, Spindle speed RPM: 9000

Key data: 730 , 730 , 850

CNC controller: FS-31IA (MSX-701 III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 Distance spindle nose - table surface mm: 100 – 830 Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 División estandar Grados: 0.001º Maximum workpiece rotation diameter mm.: 800 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: HSK A63 Bearing Inner Diameter mm.: 40 Spindle torque Nm: 220 Tool system Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Tool Shanks : BT-40 NUMBER OF TOOL OFFSE ...

Vertical machining center, CHIRON FZ08KW, 2 pallet, 15000 RPM, HSK40A, CNC Fanuc 21iM, The machine is visible in our warehouse in Gussago BS. M i m u Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Control Heidenhain ... TNC 530 Clamping table surface... 600mm Axis X ... 800mm Axis Y ... 700mm Axis Z ... 610mm Spindle speed ... 20-15000 rpm controlled axes ... 5 cooling ... 20bar ISO 40 Max. workpiece weight ... 300kg Main engine power ... 25kW Rapid traverse ... 32,32,16m/min Number of positions in the tool changer... 30 Machine weight ... 8750kg L x W x H ... 3710x2530x3230mm

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Key data: 1050 mm, 510 mm, 560 mm

Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Surface grinding machines with rotary table and horizontal grinding spindle Table dia: 700 mm Table can be inclined! High accuracies Rigid casting design Hydrostatic guideways in the X-axis and the rotary table Outstanding long-term precision and longevity Ergonomic and easy to operate compact and space saving design Best damping properties Direct, wearless drive in the rotary table

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 300 mm   material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1   drive power: 48 kW GRINDING SPINDLE 2   drive power: 48 kW COMPONENT-FEEDER   Feeder Design: rotary Feeder   feeder velocity max.: 20 mm/min   feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 5000 mm   total height: 3100 mm   total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment syst ...

Manufacturer: Harwi, Type: Piranha 1550, Year: 2015, Cutting lenght mm: 3300, Cutting depth mm: 1550, Working hight mm: 55, Saw Blade Diameter mm: 250, Main engine kW: 3, Wight approx. kg: 485, Year :2015

CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16  ...

FAS Vertical conveyor box elevator 4770x950x1200 RA2400 Make: FAS Direction of travel: the elevator can be accessed from both sides Vertical transport height: Flexible adjustment of input and output levels and also intermediate levels Maximum size of transported goods: 850x380xXXX mm LxWxH Overall height: 4770 mm Frame width (NB): 950 mm Frame depth: 1200 mm Height of feet: 75 mm Motor : SEW motor 380-500V Disassembled into two parts 2400x950x1200mm Scope of delivery: including supports, side guides, light barriers, terminal box Optionally available: Frequency converter Height adjustment Leading and trailing conveyor technology Control system Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Length base: 1200 Breite Basis: 950 Bauhöhe in mm (BH): 4770 nominal voltage: 380-500V Engine type: SEW Eurodrive Transporthöhe mm: Variabel verstellbar  ...

Nerak vertical Z conveyor 2500-750-650-350 Stainless steel food grade RA1961 Make: Nerak Material: Stainless steel food grade Running direction: both directions Vertical transport height: 2500 mm Maximum size of transported material: 750x650x350 mm LxWxH Overall height: 3300 mm scaffold width (NB): 1155 mm Height feet: 150 mm return rollers: 20 pcs. Motor : SEW motor 380-500V Conveying speed: 0,45m/s Scope of delivery: including supports, without side guide, light barriers, terminal box. Optionally available: Frequency converter Features: Length base: 1700 Breite Basis: 1155 Bauhöhe in mm (BH): 3300 nominal voltage: 380-500V Engine type: SEW Eurodrive Transporthöhe mm: 2500 Transportgut LxBxH mm: 750x650x350 scope of delivery: including supports, Klemmkasten, Lichtschranken For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be hap ...

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

Unused vertical stainless steel tank, capacity: 600 liters. 5 pieces available.

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

overhauled: 2024 Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling... 20bar ISO 40 L x W x H ... 2700x3000x2940mm Machine weight... 5500kg Magazine spaces ... 20 The machine has undergone a complete overhaul. More info on request.

Fuho Type 1408 Metal Band Saw Vertical band saw Passage width 350mm Saw blade device Motor 1kW 400V 50Hz Scissors for saw blades Table can be swivelled transversely and longitudinally Saw blade guide at the top and bottom Band length 2362mm G&2996-M40GH

Vertical Multistage High Pressure Centrifugal Pump KSBTyp Movichrom N CN 3/10 2RFabr. Nr 1-P30-837561Nominal flow rate max. 3 m3/hNominal delivery head 70 meters = 7 barNominal speed 2900 rpm. Motor power 1.5 kWNet connection 400 volts, 50 Hz- pump structure in 10 stages- pump elements made of stainless steel, pump base made of cast iron connection flanges DN 32- suitable for drinking water supply, irrigation and drainageSpace requirement pump L x W x H 250 x 220 x 830 mmWeight 38 kgUnused replacement pump made of

roll diameter: 500 mm throat: 485 mm workpiece height: mm total power requirement: 2 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 2200 mm Cutting height: 30 mm automatic: nein ja/nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 900 mm y-travel: 600 mm z-axis: 200 mm table length: 1020 mm table width: 860 mm taper MK: 40 Table size, approx. 1,020 x 860 mm Max. weight of workpiece 800 kg Table travel, longitudinal, max. (X) 900 mm Boring head travel, cross, max. (Y) 600 mm Boring spindle stroke (Z) 200 mm Vertical travel of cross beam (W) 635 mm Vertical distance between table and boring spindle 15 - 850 mm Distance between columns 950 mm Spindle Ø 110 mm Spindle taper internal/external ISO 40 18 spindle speeds 10 - 2,500 rpm Milling feeds of table, infinitely variable 1 - 6,000 mm/min 4 milling feeds of boring head 30 - 180 mm/min 6 boring feeds 0.01 - 0.39 rpm Accuracy of all 3 axes when the machine was new 0.003 mm Quick feeds for table, boring head slide, and boring spindle, max. 6,000 mm/min Spindle drive 6.2 kW Weight, approx. 9,000 kg Total electrical load  ...

spindle diameter: 0 mm x-travel: 700 mm y-travel: 600 mm table length: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double Column Design Jig Borer Tablesize: 800 x 600mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: NA mm throat: NA mm workpiece height: mm working area: 200 mm workpiece dia.: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Bandsaw for Butcher The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 520 mm y-travel: 400 mm z-travel: 450 mm spindle taper ISO: 40 control: TNC 360 coolant tank: l total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 2450x2300x3300 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.