veneer machines used for sale (107)

For sale is a veneer assembly machine FWJ 900 from Kuper. The machine is visually and technically in good condition. In 2020, a new compressed air/maintenance unit was installed for 155€ by the company Kuper. -Passage width approx. 920 mm -Veneer thickness approx. 0.4 - 2 mm -Feed speed approx. 15 m/min

Joos HP 90 Hydraulic veneer press with electric combi heating plates For sale is a well-maintained veneer press with the following data: -Pressing area 2.55m x 1.35m -Height of the pressing room 0.4m -Operating pressure 355 bar -Basic dimensions 2.98m x 1.53m x 2.1m

Used veneer guillotine shear (veneer cutting machine) CAGLIO (Luigi Caglio, Italy), model TRC 3200, for cutting veneer sheets in a straight line with precision. It has a cutting length of 3200 mm, a hydraulically operated clamping beam that holds the veneer sheet during cutting, and a motorised back gauge (guide) for fast and accurate adjustment. The base, the blade carrier and the table are made of cast iron. Technical data: Maximum cutting length: 3200 mm Cutting height: 100 mm Hydraulic unit pump motor: 7.5 HP Hydraulic pressure, adjustable: 60 - 120 atm Weight: 3800 kg For more information and for the condition of the machine, please contact us. Auction-ID: A7-50988-126

Code: 0493 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Code: 0491 Brand: KUPER Model: FW MINI 630 - CE Standard Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31

Code: 0489 Brand: CASATI MACCHINE Model: 3100 - CE Standard Automatic veneer guillotine for joinery, furniture, doors, window and door frames, sliced veneers and other applications – CE Standard Technical data: Sturdy structure Hydraulic power unit for blade cutting movement Cutting length 3100 mm Electrically operated rear stop Cutting inspection light Pump motor 4 Hp Register motor 0,5 Hp Safety photocells Side guide for angled cuts Overall dimensions mm 4150 x 1600 x 1500 h Weight kg 3200

Gebr. Veneer Saw Joining and fine-cutting saw SCHEER FM2-3000 Saw unit: 2.5 hp (approx. 1.85 kW) Max. cutting length: 300cm Pressure beam adjustable by handwheel Angle stop on the left side rear side tables Saw is running. Sale in the current condition and unobsolete from carpentry dissolution (1-man operation). Fixed price.

Copper-veneer assembly machine FW/J 920-Bj.95 -Front and rear wooden pads are no longer available - Instruction manual available

Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available

Code: 0477 Brand: EMME ELLE - ITALY Model: T.O. 3200 - CE Standard Hydraulic veneer guillotine for joinery, furniture, doors, window and door frames, slitting and other applications – CE Standard Technical data: Sturdy construction The hydraulic power unit controls the movement of the cylinders to move the pressure plate and the blade Cutting length 3220 mm Cutting height 100 mm Electrically operated rear stop – Max depth 750 mm – Min depth 20 mm Power unit pump motor 7,5 Hp Rating motor 0,75 Hp Safety photocells Weight kg 4300

Cutting length: 3100 mmCutting height: 45 mmMotor output: 1,8 kWDimensions (L/W/H): mmmachine weight ab.: 500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plate dimensions: 2.200 x 1.250 mmDaylight opening: 400 mmNumber of daylights: 1 St.Heating: Elektrisch Specific pressure: 2,2 kg/cm²Total pressure: 60 toMotor output: 0,75 kWDimensions (L/W/H): 2.750 x 1.380 x 1.785 mmweight of the machine ca.: 3.000 kgsafety device: Notausseil The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chopper, Faz Model, Manufactured by Josting

Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

Guillotine for cutting veneer Kuper Hymmen AS 220 Cutting width: 2200 mm Cutting depth 1020mm Electronic Cut Stop Pass Knife actuation: two-handed control for safety Security Gateway 4kw guillotine motor 1.5kw Pressure Motor Net price

Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 M ...

A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment.

This FISCHER & RüCKLE Veneer scissors was manufactured in 2007. It features a milling unit and a gluing unit for butt joint gluing, enhancing its functionality. The machine includes three replacement knives, a milling cutter, and a gluing station. Recently updated with new energy chains in 2020, it measures 7m in length, 3m in width, and 2m in height. Contact us for more information about this machine.

This Fischer & Rückle FZR 21 was manufactured in 2015. A used veneer crossfeed splicing machine, it efficiently splices parallel jointed veneer strips into endless or component-matched veneer faces. It handles veneer strip lengths from 350 to 2150 mm and widths up to 600 mm, with a thickness range of 0.3 to 1.5 mm. Features include a semi-automatic feeding device and a horizontal pressing system for tight glue joints. For more information about this machine, please reach out to us.

Single-knife veneer cutting machine JOSTING EFS 2800, built in 1975, very good used condition, in use until 02/2026, Spare blade Price from location