used Veneer joining machines for sale

SPECIFICATIONS: Machining max. mm: 1000 Veneer thickness mm: 0.4 - 2 Installed capacity KW: 0.5

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Splicing machine with glue thread Make: Casati Type: Z 2000 technical details: arm length: 1.200 mm veneer thickness: 0,4 - 2 mm feed speed: approx. 5 - 40 m/min. noise measurement: 73,5 dB compressed air consumption: 0,05 l/min working pressure: 6-8 bar overall dimensions: 2.050 x 600 x 1.400 mm This model is specially designed for the users requiring high production and considerable working speed also when using difficult materials. - stepless change of heater oscillation angular speed, independent of the linear feeding speed - accurate adjustment of the feeding friction pressure - adjustment of the starting point and stop point - thread heating by electric resistance - amperometer on the control panel for an accurate adjustment of the heating temperature - zig-zag height adjustment - automatic breaking of the thread - all functions are operated on the con ...

CROSS-FEED SPLICER Width: 3400 mm

CROSS-FEED SPLICER Manufactured by Fisher+Rückle Type: CROSSMASTER Model: FZR

Longitudinal Splicer Manufactured by FISHER+RÜCKLE

Longitudinal Splicer Manufactured by Kuper Model: FL/Rapid

SPECIFICATIONS: Min. length of veneer strip: 350 mm Min. width of veneer strip: 45 mm Veneer thickness: 0.3 - 1.5 mm Working height: 970 mm Temperature control: 0 - 200° C

Veneer splicer Kuper FM Mini 630 T The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

SPECIFICATIONS Max. working length mm: 1150 Operation with wire

Veneer splicing machine Kuper type FW 1200 E Specifications: • Adhesive medium: glue thread

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. - NO CE certification! - PRICED IN RECONDITIONED CONDITION - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools, additional equipment, accessories, software, equipment, etc. (in relation to the photo and lot description). ,Approx. Onsite Dimension. (l x w x h): 1,350 x 820 x 1,660 mm, weight approx.: 166 kg

Proven veneer spacing machine, veneer sewing machine from Kuper FWJ920 Veneer thickness approx. 0.3 - 2mm Feed speed approx. 15 m/min Projection 920mm Power connection 380V / 0.45kW Automatic start via contact brush, interruption via foot pedal 1 spool of glue thread Threader Release Operating instructions The machine is set. You can get started right away. Original paint, only a few paint spots touched. Pressure reducer and all V-belts renewed Dimensions approx. 1350 x 500 x 1750mm (LxWxH). Weight approx. 185kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Description: For assembling smooth veneers in the thickness range from approx. 0.4 to approx. 1.5 mm lengthwise. A special PVAc glue and the tried and tested Kuper special glue thread are used as the bonding medium. Kuper special glue thread is used in a super-thin quality (high yield). Min. veneer strip length: approx. 400 mm Veneer strip width: from 40 mm Material feed for butt gluing: approx. 15 m/min. Drive motor 0.55 kW, total connection 2.5 kW Air consumption: approx. 300 NL/min. Space requirement LxWxH 1700mm x 1020mm x 1600mm, Weight approx. 650 kg. SOLD IN FUNCTIONALLY TESTED CONDITION SOLD AS SEEN - WITHOUT WARRANTY ! Known defects: Sliding clutch bearing extremely loud. Heating for white glue defective. Discs for white glue application broken out Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly poin ...

Veneer splicer KUPER model FW1150 used

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, Total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. SOLD AS SEEN - WITHOUT WARRANTY ! - NO CE certificationApprox. Onsite Dimension. (l x w x h): 1,280 x 5,800 x 1,470 mm, weight approx.: 166 kg

SPECIFICATIONS: working length mm: 630 Dimensions of the workbench mm: 700 x 380

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 3 spools of glue thread Threader Release The machine is set. You can get started right away. Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Tried-and-tested veneer spacing machine, veneer sewing machine from Kuper FW/M 630 T Projection 630mm Power supply 230V Shifting via foot pedal 1 spool of glue thread Threader Release The machine is set. You can get started right away. CE Mark Operating instructions The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m