variable used for sale

V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable pitch -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm -Weight: 5.1 kg

Second Hand Almig VARIABLE55 55 kW, 13 bar, 10.58 m3/min Year of manufacture 2016 with 42,734 hours Frequency-controlled

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

VOLBERS WINE MIXER WITH VARIABLE AREA FLOW METER VOLBERS mixer consisting of: Variable Area Flow Meter Atomization section with sight glass on a stand C0² Injection Device

Technical data: - Load capacity 7 t - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 2 x arm length 750 mm - 1 x arm length 850 mm - Traverse dimension approx. L 1500 x W 1300 mm - Weight with chains approx. 200 Kg

technical details gearbox: - Speed range output shaft: 18 - 49 rpm - Torque: 10.5 mkp = 103 Nm - infinitely adjustable via handwheel Technical data engine: - Manufacturer: BBC / YQU 80 MC 2a - Number: GS 608117 - 33 - Voltage: 380/200 V - Current: 2.6/4.5 A - Frequency: 50 Hz - Power: 1.1 kW - Cos φ: 0.86 - Speed: 2,860 rpm - Total weight: 40 kg - Dimensions: 600 x 280 mm - Hole dimensions base plate: 90 mm longitudinal / 140 mm wide - Transport dimensions: 700 x 450 mm (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Technical data: - Load capacity 10000 Kg - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 1 x arm length approx. 700 mm - 1 x arm length approx. 800 mm - 1 x arm length approx. 1100 mm - Traverse dimension approx. L 1600 x W 1400 mm - Weight with chains approx. 200 Kg

Variable area flow meter for heat transfer oil, H250/RR/M40/HT/ESK, Krohne, new -60% Special price ! The current price of a similar product is about € 2100 excluding VAT. If you have a UID number, we will gladly issue an invoice without VAT. We still have several identical units, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. Technical data: - For heat transfer oil with 860 kg/m³. - Viscosity 1.23 mm²/s - Working temperature: 200°C - Working pressure: 5,0 bar - Measuring range 0-25 l/min - Connection G1 - Output signal 4 - 20mA - Made of stainless steel 316 - Max. working pressure: 70 bar - Max. Temperature: 300°C 6 months warranty We give yo ...

Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg

Technical data: - Load capacity 8000 Kg - 3 stop chains variable with hoe load capacity each 5000 Kg - 2 x chain length with hoes max. approx. 500 mm - 1 x chain length with hoes max. approx. 2000 mm - 1 x arm length approx. 750 mm - 1 x arm length approx. 1200 mm - 1 x arm length approx. 1400 mm - Mounting arms adjustable on the side - Mounting bracket adjustable in grid - Traverse dimension approx. L 1800 x W 2200 mm - Weight with chains approx. 550 Kg

Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 0.75 kW -Speed range: 39 to 213 rpm -Motor: adjustable -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Dimensions: 450/410/H190 mm -Weight: 23 kg

Variable displacement pump, axial piston helical axis design, for hydrostatic drives in open circuit. Mannesmann Rexroth Replica, New Part The flow rate is proportional to the drive speed and the delivery volume and is infinitely variable at constant drive speed. Manufacturer: Zhen Yuan Model No.: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size 0-355 cm³ Actuator: Pressure regulator Flow volume 355 cm³ Max. speed 1320

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 0.12 kW -Speed range: 0.09-0.81 rpm -adjustable -Drive shaft: Ø 35 mm -Protection class: IP 44 -Dimensions: 750/250/H270 mm -Weight: 55 kg

Frequency Manufacturer: Siemens Model No.: 6SE7031-0EE60-Z Item is new and unused, but may show signs of storage.

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VE160HD2D/63W-VAL020B The pump is NEW and fully functional. see pictures for more details.

Hydraulic pump Axial piston Variable displacement pump Manufacturer: Rexroth Model: A4VG90DA2DT2/32R - NZF02F001LH The pump is NEW and fully functional. see pictures for more details.

Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VM 55 HD2 / 63W - VZB027B The pump is NEW and fully functional. see pictures for more details.

Hydraulic Pump Variable Displacement Pump Manufacturer: Rexroth Model No.: A2FM180-61W-VAB010 The pump is NEW and fully functional. see pictures for more details.

Hydraulic Pump Variable Displacement Pump Manufacturer: Poclain Hydraulics Model No.: MSE18-2-D11-T19-2A50257EF The pump is NEW and fully functional. see pictures for more details.

Geared motor, variable LENZE GST 05 2KVCK090-3213C 003620 A ( GST052KVCK090-3213C003620A ) GST 05 2VCK090-3213C 003622 A ( GST052VCK090-3213C003622A ) 25-134 rpm I = 24.24.Br 933 motor: MGERAXX090-32 1.5 kW 1400 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP 55 shaft diameter: Ø 24 mm wavelength: 50 mm shaft diameter: Ø 11 mm, distance: 25 / 25 mm flange diameter: Ø 110 / 160 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 500 x 380 x 210 mm

variable gearbox ASUG Type: 8.21 - 13/3 ( 8.21-13/3 ) Pmax Drive: 0.4 kW nmax Drive: 1360 rpm n Output: 5 - 45 rpm Shaft Drive: Ø 19 mm Shaft Output: Ø 25 mm Flange: Ø 200 mm New ! Dimensions: 410 x 210 x 200 mm

Control Techniques Undrive M701 frequency inverter, with 5.5kW power. For Bobst Alpina 110 II matic. Control Techniques Undrive M701 frequency inverter, with 5.5 kW output. For Bobst Alpina 110 II matic.

Gear motor variable / adjustable SEW S60-D21 B ( S60-D21B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 23 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm used, tested ! Dimensions: 720 x 340 x 280 mm

Geared motor variable / adjustable SEW S60- 21 B ( S60-21B ) 0,0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 23 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm used, tested ! Dimensions: 720 x 340 x 280 mm

Gear motor variable / adjustable with brake and slip hub GETRIEBEBAU NORD SK. 9032R-R 150U-90 L/4BR ( SK.) 9032R-R150U-90L/4BR ) 1.5 kW 2.2 - 14.1 rpm adjustable by handwheel 220 / 400 V IP55 slip hub / slipper clutch MAYR ROBA size 4 adjustable ! shaft diameter: Ø 30 mm used, tested ! Dimensions: 810 x 340 x 640 mm

Gear Motor Variable Leroy Somer Type: CB 2203 SB3 U ( CB2203SB3U ) 0,0,0 37 kW 25/ 4.2 rpm i = 100 variable speed LS 71 220/ 380 V 50 Hz IP55 shaft diameter: 30 mm New ! Dimensions: 580 x 200 x 380 mm

Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 9.2 kW -Speed range: 34-207 rpm -Electric motor: SEW type DFV132ML-4 -Transmission: SEW type R82-VU4HS -Motor: adjustable -Drive shaft: Ø 50 mm -Design: B3 -Protection rating: IP54 -Dimensions: 900/380/H670 mm -Weight: 247 kg

Gear motor variable / adjustable SEW S79 D26B ( S79D26B ) 2,2,000 2 kW 24.4 - 121 rpm 380 / 660 V IP54 239 - 150 Nm shaft diameter: Ø 45 mm used, tested ! Dimensions: 810 x 320 x 360 mm

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of adjustable gearbox Lenze Type: 11.715.03.04 -Manufacturer of gearbox: Lenze, Type: 52.145.04.100 -Manufacturer Motor Hanning Type: EeDF71L/2 -Motor power: 0.55 kW -Speed range: 46-264 rpm -Motor: adjustable -Drive shaft: Ø 25 mm -Design: B5 angle -Quantity: 1 motor available -Price: per piece -Dimensions: 480/220/H220 mm -Weight: 25 kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of gearbox: AEG Motor manufacturer: AEG -Motor power: 0.175 kW -Speed range: 450-4000 rpm -Motor: adjustable -Design: B3 -height of shaft axis: 80 mm -Drive shaft: Ø 14 mm -Quantity: 1 motor available Price: per piece -Dimensions: 380/200/H240 mm -Weight: 22 kg

Gear motor variable / adjustable PIV F 75 AS 31 ( F75AS31 ) 5,5,000 5 kW 124 - 745 rpm 380 V IP44 7.1 - 22.5 Nm shaft diameter: Ø 45 mm with electric actuator ! used, tested !' Dimensions: 1060 x 830 x 420 mm

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer: MOTOVARIO TKFL/10 gearbox -Manufacturer: ASEA MT80B19F100-4 engine -Motor power: 0.75 kW -Speed range: 190-1000 rpm -Motor: adjustable -Drive shaft: Ø 24 mm -Design: B5 -Quantity: 1 motor available -Price: per piece -Dimensions: 445/255/240 mm -Weight: 29 kg

Gear motor variable / adjustable BRUMO GRG1U100B 0.37 kW 29 - 159 rpm 220 / 380 V shaft diameter: Ø 20 mm used, tested ! Dimensions: 500 x 370 x 210 mm

controllable gear, adjusting gear, spindle adjusting gear -Manufacturer: PIV, variable speed gearbox type KSC 432 B3 without drive -Speed range: n2 53-255 rpm at n1 2800 rpm -Drive motor: can be supplied at extra cost -Individual components: see photos -Shaft diameter: 24 x 50 mm -Shaft diameter: 16 x 40 mm -Total dimensions: 380/300/H280 mm -Weight: 30kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of gearbox: Lenze, Type: 11.431.10.08.1 -Manufacturer Motor ATB Type: ERFY 0.55/4-7 -Motor power: 0.37 kW -Adjustable speed range: 111 to 617 rpm -height of shaft axis: 50 mm -Drive shaft: Ø 16 mm -Number: 2 motors available -Price: per piece -Dimensions: 370/254/H190 mm -Weight: 14.5 kg

Gear motor variable SEW transmission: S42-VUO 17-81 rpm manually adjustable via V-belt motor: eDFT71D-4 0,0,0,0 37 KW 1370 rpm 220/ 380 V 3AC IP54 Shaft diameter: Ø 25 mm Motor base: 130 / 135 x 124 mm Hole spacing ( parallel to shaft ): 100 mm hole spacing ( transverse to shaft ): 80 mm hole diameter: Ø 10.5 mm New ! Dimensions: 430 x 220 x 360 mm

Gear motor variable / adjustable SEW S60- D22 B ( S60-D22B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 15 - 115 rpm manually adjustable 380 V IP55 shaft diameter: Ø 35 mm New ! Dimensions: 710 x 350 x 280 mm

• Variable frequency drive • Voltage 400V • Power 22 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-203

Gear motor variable / adjustable with brake and slip hub GETRIEBEBAU NORD SK65SR15080L/4 0.74 kW 12 - 34 rpm (counted) adjustable by handwheel 220 / 380 V 3AC IP33 with right-angle gear SK65SVR150 used, tested ! Dimensions: 500 x 470 x 250 mm

• Variable frequency drive • Voltage 400V • Power 22 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-196

Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg

manufacturer/tradename: Corning 6775 AC/DC input 120 V AC feature CE compliant Parameter 0-3400 rpm speed L × W × H 14 cm × 16 cm × 13 cm For any inquiries, please send an email : f33gmpyahoo.com Attn : Jescica Tan

• Variable frequency drive • Voltage 400V • Power 22 KW • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-202

STRAND PELLETIZER 250 mm., Variable pitch, with synchronized pull off unit, 4 kW motor, 4 poles, IE3 motor drive, 1.1 kW motor on pull off unit, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 5,1 kw, availability: 70 working days ca, working width: 250mm, conditions: new machine, type: strand pelletizer for extruders

Manufacturer Atlas Copco Machine Number API 432897 Type GA 30 VSD Year of construction 2012 max. pressure 12.8 bar Power consumption 30 kW Delivery rate 5,580 l/min Operating hours 34,011 B/h Machine utilization: 1-20 27% 20-40 30% 40-60 26% 60-80 12% 80-100 5% Test run carried out lxwxh 134x86x148 cm Weight 600 kg Loading costs 75,00 Euro Auction-ID: 043-H7G-3

• Lot of 6 variable frequency drives • It includes: • 3 x HITACHI L100-005 NFE drives • 2 x HITACHI L100-002 NFE drives • 1 x STÖBER FDS4024/B drive • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-44536-209