variable frequency used for sale

More info soon

V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable pitch -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm -Weight: 5.1 kg

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

S. No.: 011001 Equipment / Additional information: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp  ...

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

Screw compressor Variable28 Inverter integrated. 28 kW 13 bar 4.24 m3/min Year of Make: 2017 Hours: 41,635

83033842 and 83031551 Used Auction-ID: A1-50849-614

Frequency Manufacturer: Siemens Model No.: 6SE7031-0EE60-Z Item is new and unused, but may show signs of storage.

Control Techniques Undrive M701 frequency inverter, with 5.5kW power. For Bobst Alpina 110 II matic. Control Techniques Undrive M701 frequency inverter, with 5.5 kW output. For Bobst Alpina 110 II matic.

Stock number: D977, In stock: Yes, Amount in stock: 1 pc., Item: Variable Frequency Drive (VFD), Construction: Mounted in an electrical cabinet with a main switch, etc., Power: Max 45 kW, Manual DL link: .unisgroup.nl/pdf/EN/Telemecanique-Altivar-5-1.1-to-110-kW-User-Manual .pdf

Set of variable frequency drives and industrial automation components Control and power modules for electric motors and servo motors Multiple single and dual motor modules Control modules with communication interfaces Frequency inverters with digital operator interfaces Power and power modules Three-phase network filters Network reactances and selfs Interfaces and control adapters Industrial Communication Connections Power supplies and electrical accessories Industrial wiring and connector elements Set including assembled components and packaged parts Quantity: large set on pallet Auction-ID: A1-51172-128

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

Technical data: - Load capacity 7 t - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 2 x arm length 750 mm - 1 x arm length 850 mm - Traverse dimension approx. L 1500 x W 1300 mm - Weight with chains approx. 200 Kg

Technical data: - Load capacity 10000 Kg - 3 variable lifting chains on the ring above the traverse 2000 mm - 3 stop chains with hoe load capacity each 5000 kg - 2 x chain length with hoes approx. 800 mm - 1 x chain length with hoe and clamping shot approx. 2500 mm - 1 x arm length approx. 700 mm - 1 x arm length approx. 800 mm - 1 x arm length approx. 1100 mm - Traverse dimension approx. L 1600 x W 1400 mm - Weight with chains approx. 200 Kg

Technical data: - Load capacity 8000 Kg - 3 stop chains variable with hoe load capacity each 5000 Kg - 2 x chain length with hoes max. approx. 500 mm - 1 x chain length with hoes max. approx. 2000 mm - 1 x arm length approx. 750 mm - 1 x arm length approx. 1200 mm - 1 x arm length approx. 1400 mm - Mounting arms adjustable on the side - Mounting bracket adjustable in grid - Traverse dimension approx. L 1800 x W 2200 mm - Weight with chains approx. 550 Kg

Variable area flow meter for heat transfer oil, H250/RR/M40/HT/ESK, Krohne, new -60% Special price ! The current price of a similar product is about € 2100 excluding VAT. If you have a UID number, we will gladly issue an invoice without VAT. We still have several identical units, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. Technical data: - For heat transfer oil with 860 kg/m³. - Viscosity 1.23 mm²/s - Working temperature: 200°C - Working pressure: 5,0 bar - Measuring range 0-25 l/min - Connection G1 - Output signal 4 - 20mA - Made of stainless steel 316 - Max. working pressure: 70 bar - Max. Temperature: 300°C 6 months warranty We give yo ...

VOLBERS WINE MIXER WITH VARIABLE AREA FLOW METER VOLBERS mixer consisting of: Variable Area Flow Meter Atomization section with sight glass on a stand C0² Injection Device

Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VE160HD2D/63W-VAL020B The pump is NEW and fully functional. see pictures for more details.

Hydraulic pump Axial piston Variable displacement pump Manufacturer: Rexroth Model: A4VG90DA2DT2/32R - NZF02F001LH The pump is NEW and fully functional. see pictures for more details.

Hydraulic pump Variable displacement pump Manufacturer: Rexroth Model: A6VM 55 HD2 / 63W - VZB027B The pump is NEW and fully functional. see pictures for more details.

Variable displacement pump, axial piston helical axis design, for hydrostatic drives in open circuit. Mannesmann Rexroth Replica, New Part The flow rate is proportional to the drive speed and the delivery volume and is infinitely variable at constant drive speed. Manufacturer: Zhen Yuan Model No.: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size 0-355 cm³ Actuator: Pressure regulator Flow volume 355 cm³ Max. speed 1320

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Hydraulic Pump Variable Displacement Pump Manufacturer: Rexroth Model No.: A2FM180-61W-VAB010 The pump is NEW and fully functional. see pictures for more details.

Hydraulic pump Variable displacement pump Manufacturer:- Model: DMVA G 215-080 SD 1 W 31 1 A 0 0 S0 0 The part is technically in good condition, Nevertheless, this is a used items, which shows signs of wear or may have. see pictures for more details.

Hydraulic Pump Variable Displacement Pump Manufacturer: Poclain Hydraulics Model No.: MSE18-2-D11-T19-2A50257EF The pump is NEW and fully functional. see pictures for more details.

Geared motor, variable LENZE GST 05 2KVCK090-3213C 003620 A ( GST052KVCK090-3213C003620A ) GST 05 2VCK090-3213C 003622 A ( GST052VCK090-3213C003622A ) 25-134 rpm I = 24.24.Br 933 motor: MGERAXX090-32 1.5 kW 1400 rpm 220 - 240 / 380 - 415 V 3AC 50 Hz 60 Hz - operation is possible ! IP 55 shaft diameter: Ø 24 mm wavelength: 50 mm shaft diameter: Ø 11 mm, distance: 25 / 25 mm flange diameter: Ø 110 / 160 mm bolt circle diameter: Ø 130 mm hole diameter: Ø 9 mm used, tested ! Dimensions: 500 x 380 x 210 mm

variable gearbox ASUG Type: 8.21 - 13/3 ( 8.21-13/3 ) Pmax Drive: 0.4 kW nmax Drive: 1360 rpm n Output: 5 - 45 rpm Shaft Drive: Ø 19 mm Shaft Output: Ø 25 mm Flange: Ø 200 mm New ! Dimensions: 410 x 210 x 200 mm

Gear motor variable / adjustable SEW S60-D21 B ( S60-D21B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 23 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm used, tested ! Dimensions: 720 x 340 x 280 mm

Geared motor variable / adjustable SEW S60- 21 B ( S60-21B ) 0,0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 23 - 115 rpm hand-adjustable 380 V IP55 shaft diameter: Ø 35 mm used, tested ! Dimensions: 720 x 340 x 280 mm

Adjustable gearbox, variable speed gearbox, spindle gearbox, DISCO variable speed gearbox -Manufacturer: Lenze, DISCO adjustable gearbox -Type: 11 511 03 00 0 -Speed range: 1000-167 rpm for motors up to 0.37 kW / 1380 rpm -Dimensions: 228/163/H185 mm -Weight: 13 kg

Gear motor variable / adjustable with brake and slip hub GETRIEBEBAU NORD SK. 9032R-R 150U-90 L/4BR ( SK.) 9032R-R150U-90L/4BR ) 1.5 kW 2.2 - 14.1 rpm adjustable by handwheel 220 / 400 V IP55 slip hub / slipper clutch MAYR ROBA size 4 adjustable ! shaft diameter: Ø 30 mm used, tested ! Dimensions: 810 x 340 x 640 mm

Gear Motor Variable Leroy Somer Type: CB 2203 SB3 U ( CB2203SB3U ) 0,0,0 37 kW 25/ 4.2 rpm i = 100 variable speed LS 71 220/ 380 V 50 Hz IP55 shaft diameter: 30 mm New ! Dimensions: 580 x 200 x 380 mm

Gear motor variable / adjustable SEW S79 D26B ( S79D26B ) 2,2,000 2 kW 24.4 - 121 rpm 380 / 660 V IP54 239 - 150 Nm shaft diameter: Ø 45 mm used, tested ! Dimensions: 810 x 320 x 360 mm

Gear motor variable / adjustable PIV F 75 AS 31 ( F75AS31 ) 5,5,000 5 kW 124 - 745 rpm 380 V IP44 7.1 - 22.5 Nm shaft diameter: Ø 45 mm with electric actuator ! used, tested !' Dimensions: 1060 x 830 x 420 mm

Gear motor variable / adjustable BRUMO GRG1U100B 0.37 kW 29 - 159 rpm 220 / 380 V shaft diameter: Ø 20 mm used, tested ! Dimensions: 500 x 370 x 210 mm

Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 0.75 kW -Speed range: 39 to 213 rpm -Motor: adjustable -Design: B3 -Shaft diameter: 20 mm -Protection class: IP 54 -Dimensions: 450/410/H190 mm -Weight: 23 kg

Gear motor variable SEW transmission: S42-VUO 17-81 rpm manually adjustable via V-belt motor: eDFT71D-4 0,0,0,0 37 KW 1370 rpm 220/ 380 V 3AC IP54 Shaft diameter: Ø 25 mm Motor base: 130 / 135 x 124 mm Hole spacing ( parallel to shaft ): 100 mm hole spacing ( transverse to shaft ): 80 mm hole diameter: Ø 10.5 mm New ! Dimensions: 430 x 220 x 360 mm

Gear motor variable / adjustable SEW S60- D22 B ( S60-D22B ) 0,0,0,0 75 kW / 0.48 kW (1440 / 940 rpm) 15 - 115 rpm manually adjustable 380 V IP55 shaft diameter: Ø 35 mm New ! Dimensions: 710 x 350 x 280 mm

Gear motor variable / adjustable with brake and slip hub GETRIEBEBAU NORD SK65SR15080L/4 0.74 kW 12 - 34 rpm (counted) adjustable by handwheel 220 / 380 V 3AC IP33 with right-angle gear SK65SVR150 used, tested ! Dimensions: 500 x 470 x 250 mm

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 0.12 kW -Speed range: 0.09-0.81 rpm -adjustable -Drive shaft: Ø 35 mm -Protection class: IP 44 -Dimensions: 750/250/H270 mm -Weight: 55 kg

Adjustable geared motor, variable speed geared motor, electric motor -Engine power: 9.2 kW -Speed range: 34-207 rpm -Electric motor: SEW type DFV132ML-4 -Transmission: SEW type R82-VU4HS -Motor: adjustable -Drive shaft: Ø 50 mm -Design: B3 -Protection rating: IP54 -Dimensions: 900/380/H670 mm -Weight: 247 kg

Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14"–26" Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24" printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening The Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and p ...

Offer 22650 Specifications: - Lifting capacity 2100 t - Y distance in width 4.0 m - Y – dimension in length 3.5 m - 3 load handling hooks at the Y ends load capacity each 1000 kg - Forklift drive-in shoes W 500 x H 230 mm - Truss dimensions approx. L 3.2 x W 4.2 m - Outer frame made of square tube 100 mm - Center truss tube made of square tube 140 mm - Overall height approx. 510 mm - Transport dimensions L 3.2 x W 2.1 x H 0.55 m - Weight 600 kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of adjustable gearbox Lenze Type: 11.715.03.04 -Manufacturer of gearbox: Lenze, Type: 52.145.04.100 -Manufacturer Motor Hanning Type: EeDF71L/2 -Motor power: 0.55 kW -Speed range: 46-264 rpm -Motor: adjustable -Drive shaft: Ø 25 mm -Design: B5 angle -Quantity: 1 motor available -Price: per piece -Dimensions: 480/220/H220 mm -Weight: 25 kg

STRAND PELLETIZER 250 mm., Variable pitch, with synchronized pull off unit, 4 kW motor, 4 poles, IE3 motor drive, 1.1 kW motor on pull off unit, Transmission belts, Speed variation via inverter, Electrical panel compliant with CE standards - 400 V, 50 Hz with, 2 x 16 Amp sockets, width 250 mm, Rotor with 12 micrometrically adjustable rotating blades, Counter-blade made in widia, Hardened pressure roller, diameter 60 mm, straignt knurling, Hardened drive roller, diameter 40 mm, straight knurling, Pneumatic piston for presser roller adjustment, Chrome plated parts in contact with the material, Stainless steel discharge, Limit switch with safety lock, Mounted on anti-vibration support with sound proof panels, installed power - used power in work: about 60-65% : 5,1 kw, availability: 70 working days ca, working width: 250mm, conditions: new machine, type: strand pelletizer for extruders