129,270 used machines on RESALE, but how to find them? Machine Search
Diesel engine Deutz 1 cylinder, type: MAH 711, 1956, 6 HP, 1500 rpm, water cooled
2 cyl. Deutz engine F2L1011, 18.5 kW, 25 HP, with Atlas Copco compressor
Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...
Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.
Table size: 460 x 800 mm stroke x: 485 mm traverse path y: 385 mm traverse path z: 380 mm Quill stroke: by hand approximately 70 mm spindle speeds: 50-3150 rpm stufenl feeds. adjustable: 2-1000 mm / min rapid traverse rate: 2 m / min. Port: 3.7/4,4 kW space: 2100 x 1650 x 1730 mm weight: 1850 kg
used
Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.
The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D ...
Flywheel flange Deutz 816 NEW Part number: 0405 1660 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
used
We can offer an Exchange,recondioned engine Scania DC/DI12-41/45 with DEC2 ECU Please just ask for: MIW GmbH Motoren-Instandsetzungs-Werk GmbH Nord-West-Ring 8 D-27404 Zeven Tel.0049-(0)4281-950583 Fax:0049-(0)4281-950585 mail: info@miw-zeven
Gear Deutz 816 NEW Part number: 0405 4284 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
NEW Part number: 0212 5446 Please note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves.
The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...
RECON Part number: 0215 3525 / 0400 1097 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Connecting rod Deutz 816 RECON Part number: 0400 0260 / 0215 3241 V machine Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.
Connecting rod Deutz 816 RECON Part number: 0400 0261 / 0215 3241 Series machine Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
Part number: PE8P 120A 620/4 LS 325 / O 401 878 091 Controller RSUV250-800 P10A318A Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
The CE15 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE15-170 50Hz 170 bar 40 l/min. CE15-200 50Hz 200 bar 36 l/min. CE15-200 60Hz 200 bar 30 l/min. CE15-300 50Hz 300 bar 18 l/min. CE15-300 60Hz 300 bar 22 l/min. General Specifications: ----- Drive motor power: 11.2 kW (50Hz) / 13 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 22.8A (50Hz) - 23.8A (60Hz) Dimensions: 690 mm x 600 mm x 900 mm Weight: 85 kg Includes standard accessories.
Cylinder head E-start RECON Part number: 0400 1652 Complete Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us.
New Part number: 0400 0685 6/8 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min. ...
RECON Part number: 0405 2476 / 0400 6154 Complete with air start valve Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 0405 0969 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...
Suction hose for intercooler Deutz 816 RECON Part number: 0401 6285 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us.
Search Dornier Delta or Dornier Delta II Lithotripter / lithotripsy
The CE100 series is an electrically driven high-pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Includes standard accessories.
RECON 9190150128 - Completely sanded on 1e level undersize 123,75/97.75 mm - part number 0400 1106 - incl. counterweights and gear Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Typ VTR 251 2H HT 429278 / Specification SGE 02 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
The CE125 series is an electrically driven high-pressure machine for a pressure of 200 to 2500 bar and a volume flow of 21 to 240 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 90 kW (50Hz) / 90 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Includes standard accessories.
Recon Part number: 0337 9970 6/8 cylinder Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us
RECON Part number: 0405 2744 engine number: 7300533 ---------------------------------------------------------------------- ---------- Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ---------- If you have any further questions do not hesitate to contact us
The CE150 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 21 to 300 l/min. The frame consists of hot-dip galvanized sheet metal moldings and stainless steel side frames. Four rubber feet ensure secure positioning. The lifting eyelet makes it easier to transport the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE150-200-240 CE150-250-200 CE150-1000-50 CE150-1400-33 CE150-2500-21 60 Hz and others see data sheet and on request. General Specifications: ----- Drive motor power: 90 kW (50Hz) / 110 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Includes standard accessories.
maximum number of results exceeded
please refine your search
_2_Zyl._Deutz_Motor_F2L1011_Bild1.jpg)
_2_Zyl._Deutz_Motor_F2L1011_Bild2.jpg)
_2_Zyl._Deutz_Motor_F2L1011_Bild3.jpg)
_2_Zyl._Deutz_Motor_F2L1011_Bild4.jpg)
