van de wiele used for sale

Bin lifter Type Lifting equipment Height 1900 Width 1500 mm Length 1800 mm Main material Stainlees Steel Time of realisation 2-3 weeks

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Stainless steel screw conveyor with 250 mm diameter and 2.100 mm conveying length (measurement taken between center inlet and center outlet), inlet and outlet 270 mm Ø each, incl. drive via gearbox and jaw clutch.

Einwellenschredder used in the tire recycling as a rubber mill. 2 motors with each 200 kW. Performance 4 t / h truck tyres.

Stirred boiler / silo tank van der Molen 05-031/01, built 2006, in good used condition. Completely made of stainless steel, 2850 litres capacity, double-walled, heatable (steam), filling from above or with external pump from below possible. Dimensions B/T/H 190/160/420. Operating voltage 400 volts. More on request.

Seesaw with belt conveyor, approx. 5,65m - used - : Price per piece: 1.250.-€ (net), dismantled and loaded! (BF 3160) Manufacturer: Van der Lande Year built: unknown - probably 2008 Element width: approx. 75cm, Strap width: approx. 60cm Length: 2.55m plus 3.10m Total length approx. 5.65m Element height: approx. 18cm With pneumatic cylinder Overcomes a height difference of approx. 70cm The belt is slightly ribbed on one side

properties: Used belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Condition: used Incl. SEW motor Technical Data: Dimensions of the gut conveyor Total length: 12,790 mm Total width incl. motor: 900 mm Total width without. Engine: 750 mm Belt width: 550 mm Condition: good (used) Belt type: Smooth Material: Steel Frame Height: 170mm Engine data: SEW r/min 125/254 kW0,66/13 belt conveyor The belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and  ...

properties: Used belt conveyor Condition: fully functional with traces of usage Ideal for fast material transport Expertly dismantled and packaged Condition: used Incl. SEW motor Technical Data: Dimensions of the gut conveyor Total length: 5,820 mm Total width incl. motor: 930 mm Total width without. Engine: 850 mm Belt width: 550 mm Condition: good (used) Belt type: Smooth Material: Steel Frame Height: 170mm belt conveyor The belt conveyor is ideal in the picking zone for interlocking machines or workstations and to optimize the internal process. During transport, the belt conveyor can transport sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and machining machines. It also enables efficie ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,200 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Strap type: lentsrillen/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...

properties: Used telescopic belt conveyor Condition: fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. feet Incl. control cabinet 4 pieces in stock Price per piece specifications: Manufacturer: Van der Lande Year of construction: 2013 Model: TTB-800- 4x16 Total length retracted: 5,550 mm Total length extended: 16.000mm Total width: 1.500mm (incl. control cabinet) Width: 1.220mm Belt width: 800mm Condition: good (used) Strap Type: Smooth / Black Conveying height: 1.100mm Net weight: 2.200mm Incl. rear counterweights. Two speed levels adjustable. Telescopic belt conveyors The telescopic belt conveyor is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the telescopic belt conveyor can convey sensitive containers, ...

CATALOG NO. 6985 TECHNICAL DATA - max width of the workpiece 300mm - height of the workpiece 200mm - unit: corrugated rubber roller + shoe + metal roller - working table 1230x440mm - belt 300x1900mm in advance: - rubber roller, sliding - aggregate about 7.5 kW - sliding roller, rubber from down: - pulling tape - pneumatic oscillation - 2 types of feed speed - feed motor 0.85 kW - diameter of the exhaust connection 110mm - dimensions length/width/height 1250/1000/1950mm - weight 530 kg – unpainted – used grinder - very good condition Net price: PLN 13900 Net price: 3124EUR Net price calculated according to the exchange rate of 4.45 PLN/EUR (with larger exchange rate fluctuations, the price may change)

suitable for CAT

Diesel combined heat and power plant, CHP, generator set, power generator used A. van Kaick Year: 1991 Generator DKBN49/200-4 200 kVA 400/231 V 289 A 50 Hz Mtu 8V183TA32 MERCEDES OM 442A 240 kW 1500 rpm Tank dimensions approx. 3600 x 1500 x 1500 mm Dimensions container: approx. Mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Total length: 1,800 mm Total width incl. motor: : 950 mm Total width without motor: : 800 mm Belt width: 680 mm Belt type: smooth/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between production and processing machines. In addition,  ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: VanderLande Year of construction: 2008 Total length: 900 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Belt type: Steering grooves and Smooth Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in fr ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: VanderLande Year of construction: 2008 Total length: 900 mm Total width incl. motor: : 850 mm Belt width: 600 mm Belt type: Steering grooves Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between production and processing mac ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,800 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Belt type: Steering grooves Frame height: 170 mm 9 pieces with 1.1 Kw motor 1 piece with 0.75 kw motor Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also  ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 3,230 mm Total width incl. motor: : 850 mm Total width without motor: : 500 mm Belt width: 400 mm Belt type: Steering grooves / black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in fro ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,500 mm Total width incl. motor: : 1.170 mm Total width without motor: : 1,000 mm Belt width: 900 mm Belt type: smooth/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,950 mm Total width incl. motor: : 870 mm Total width without motor: : 700 mm Belt width: 600 mm Belt type: smooth/ green Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or b ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,800 mm Total width incl. motor: : 850 mm Total width without motor: : 800 mm Belt width: 680-700mm Belt type: smooth/ green Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or ...

properties: Used belt conveyor Color: light gray Incl. SEW engine 0,75Kw Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 2,100 mm Belt width: 400 mm Belt type: steering grooves/ black Frame height: 170 mm Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loading or delivery point and also serves, for example, as a connecting line in front of or between production and processing machines. In addition, it enab ...

Mixing and coating / impregnation unit by liquid insertion under vacuum or atmospheric conditions and at controlled temperature. Mixer Capacity: 500 L Motor power : 1,5 KW Mixing speed : 37 rpm Type of agitation : elongated blades Maximum pressure : - 1 Barg Max temperature : 200?C Air connection Liquid insertion / spraying connection 3 nozzles free to use if required. Mounted on a tilting frame Mixer rotation: manual. Double jacket Type: heating channels Max pressure: 14 barg Max temperature: 200?C Other Sold with platform + stairs + feed hopper.

Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Stroke max. 515 mm Construction height Table bottom with rail castors 535 mm Height Table bottom without rail castors 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed Rail chassis approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual switch for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the underframe- Lifting shears with two lifting cylinders - The table was movable on rails, 4 rollers on the base, 200 mm - Drive of the rail rollers via SEW Gear motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm net weight approx. 1.3 ton. good condition; used

properties: Used belt conveyor Color: light gray SEW gear motor available With Pneumatic Energy Incl. feet Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Stock: 9 pieces Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 3,500 mm Total width: 1,000 mm Belt width: 600 mm Divided into three sections 1x 570mm length 2x 1.240mm length Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loading or delivery point and also serves, for example, as a connecting line in front of or betwe ...

properties: Used belt conveyor Color: light gray SEW gear motor available 2.2 Kw With Pneumatic Energy Incl. feet Material: Steel Ideal for fast material transport Expertly dismantled and packed Condition: fully functional Stock: 8pcs Price per pc. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 3,500 mm Total width incl. motor: 1,180 mm Total width without motor: 800 mm Belt width: 700 mm Conveying height: 850mm, height adjustable Divided into three sections 1x 600mm length 2x 1.250mm length Belt conveyors The webbing belt is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive containers, boxes or other packaging and article units of different sizes to the loa ...

VanRiet belt conveyor 628 cm Long belt 50 cm Manufacturer: Van Riet Type: Folding Element Belt Conveyor Band length: 628 cm Segment lengths: (1,250 + 6,120 + 1,000 mm) Band width: 50 cm Frame width: 65 cm Lane height: 85 cm Version: Driven Electric motor: 380 volts incl. stands Shipping via forwarding agency possible, please contact us. More items - new and used - can be found in our shop! International shipping costs on request!

260 cm working width, with Volvo BM mount suitable for L50-L120 wheel loaders (as well as Liebherr, Komatsu etc.)

C.vant Riet 100l Cheese VAT Serial: 14019703 2014, stainless, 100l cheese VAT, jacketed vessel, top mounted agitator, adjustable temperature control and mixing speed, side bottom discharge, mobile, 3Ph

Container ship, cargo ship -Year of construction/location: 1927, Slikkersveer Netherlands -Length: 84.82m -Width: 9.17m - Side height: 2.56 m - Load capacity max. 1300 tons at 2.53 m draft -Cargo volume: about 1690 m3 -Main engine: -MWM TBD 602 - V12S -Power 515 kW at 1500 rpm -Number of cylinders: 12 cylinder V engine -Charging: turbocharger

Generator E motor with control cabinet only 225 B hours A van Kaick Weight engine approx. 800 kg Control cabinet approx. 50 kg Delivery possible Please inquire with place and postcode and whether there is unloading possibility.

VAN DAM 565 mug printer 6 colors 8.8 kW engine Cup rim diameter 50-135MM Speed ​​up to 400 cups per minute, depending on the format

CNC milling machine with manual tool change. Designed for milling and engraving workpieces made of solid wood, chipboard, MDF and materials with similar physical properties along the plane (2D milling), as well as artistic milling in 3-dimensional space (3D milling). Manufacturer Vanguard Working field 1300 x 2500 x 200 mm Electrospindle power 6 kW Inverter 7.5 kW Electrospindle speed 18000 rpm Feed speed 50 m/min. Milling speed 25 m/min. Clarity of drawing 0.025 mm Width of linear guides 25 mm (Y), 20 mm (X, Z) Operating voltage 380V 3 phase 50-60 Hz Equipment: DSP controller steel portal Vortex vacuum pump 7.5 kW Separate vacuum clamping system with 6 zones Tool length calibration sensor Drive ball screw pair manufactured by ATLANTA (Germany) Rack-and-pinion drive manufactured by WMH (Germany) Prismatic guides manufactured by HIWIN (Taiwan) Manual central lubricati ...

Product number: 2855 Type: lid rollover Serial number: 60201709 Year of construction: 2021 Belt width: 305 mm Lid size: 240 x 140 mm Direction: right to left Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 0.37kW Dimensions: 3500 x 900 x 2500 mm With lid rollover device

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Belt Conveyor/ Conveyor Belt/ Webbing Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 900 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 600 mm Belt Type: Longitudinal Grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey Including SEW motor Stock: 12 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Belt Conveyor/ Conveyor Belt/ Webbing Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 900 mm Total width incl. motor: approx. 660 mm Total width without motor: approx. 500 mm Belt width: approx. 400 mm Belt Type: Longitudinal Grooves and Smooth Material: Steel Frame height: approx. 170 mm Colour: Light grey Including SEW motor (0.75 KW) Stock: 1 piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for load ...

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Belt Conveyor/ Conveyor Belt/ Webbing Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 1650 mm Total width incl. motor: approx. 660 mm Total width without motor: approx. 500 mm Belt width: approx. 400 mm Belt Type: Longitudinal Grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey Including SEW motor (1.1 KW) Stock: 37 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes  ...

Belt Conveyor/ Conveyor Belt/ Webbing Manufacturer: VanderLande Condition: Used Year of construction: 2008 Total length: approx. 1950 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 700 mm Belt width: approx. 600 mm Strap Type: Smooth (Color: Green) Material: Steel Frame height: approx. 170 mm Colour: Light grey Including SEW motor Stock: 7 pieces Price per piece The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloadi ...

Key data: 50 KW, 1500 1/min

Generator motor with frame only 200 operating hours Tank 60 kVA approx. 50 kw 400 V

Double-walled stainless steel mixing tank 150 liters. To heat or cool by double wall. For mixing with the agitator. Flat bottom. Excellent working condition.

Double-walled stainless steel mixing tank 150 liters. To heat or cool by double wall. For mixing with the agitator. Flat bottom. Excellent working condition.

Alu-Tube 160x10x1400mm for Cooling Cylinders in Printing Machines

pressure: 10 t throat: 235 mm stroke: ca. 400 mm stroke speed - idle stroke downwards: 4,5 m/min stroke speed - idle stroke upwards: 10 m/min dayligth: ca. 500/600 mm table-size: ca. 450 x 400 mm ram hole: 32 mm total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 0,95 x 0,45 x 2,1 m Condition: ready for operation: Condition: geometric overhauled: Video available on our website.: Electric 380 Volt: With elect. two-hand control through: separate console: Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! The stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m². The data for this ad was created with Mo ...

Used Automatic Wrap Around Packer Vanta 2100 bph Introductionof the Wrap Around Packer Vanta Initially the used Vanta 2100 bph automatic wrap around packer marks a significant innovation in the bottling sector Specifically designed to accommodate various container types like cans glass bottles and PET bottles this machine exemplifies efficiency and precision in packaging Product Types and Scope of Application Notably versatile the Vanta 2100 bph adeptly adapts to different product sizes and types It can manage cans glass and PET bottles with diameters ranging from 50 to 110mm and heights from 70 to 370mm Moreover its capacity extends to the packaging size crosswise to the conveyor direction from 140 to 450mm and forward from 200 to 450mm Additionally the range for corrugated board sizes is expansive horizontally to the conveying direction from 210 to 1500mm and frontally from 280 to 700m ...

The CONTIMOL is the continuous sugar dissolver to produce sugar syrup (simple syrup) with constant quality and concentration. The unit can be customized to individual needs regarding potential product output and based on usage and availability of energy. Module Features • High degree of automation • Jet-Mix-System • Short start-up phase • Existing CIP integration • Manufactured using high quality material The unit includes: -Mixing station on the frame; -Control cabinet; -Power cabinet; -Vertical bunker for sugar 5.000l. with scales; -A set of augers for feeding sugar into the dissolving unit;

Used ribbon mixer by Van Aarsen. Carbon steel. Capacity 3000 L. Weight 7000 kg.

Van Meurs Aseptic bag-in-boxfilling machine Model: B200-C Used for: dairy (icecream and milkshakes) Capacity : Up to 250 bags per hour Size : 2 to 1200 liter pack Serial number : 932 Year of construction : 2000 Condition : Excellent Location : Netherlands Semiautomatic filling machine designed for aseptic filling of liquid products in bags with a cap. Process description: taking off the cap, filling by magnetic flow transmitter for counting liters and automatically placing the cap back on the bag. Placing the bags has to be done manually. The machine is multifunctional for small and large volumes: 2 - 1,200 liters bag-in-box, bag-in-drum, buckets or sterile containers. Dry sterilization by steam. Includes roller conveyor, height adjustable and fold-out table. Control cabinet and PLC control system. Many spare parts, multiple types of grippers for different type of containe ...