van de graaf used for sale

GEA Westfalia UCA 450-00-02 centrifugal decanter manufactured in 1998, equipped with a complete flocculant preparation and dosing system. The equipment has a product feed pump, flocculant dosing pump, flocculant concentrator pump and auger for solids discharge. Includes electrical panels, maximum speed of 3,000 rpm and capacity to work with sediments of up to 2,000 g/dm³. It comes with an operating manual, electrical diagrams and a list of spare parts. Technical characteristics Model UCA 450-00-02 Year of manufacture 1998 Maximum speed 3,000 rpm Maximum sediment density 2,000 g/dm³ Equipment Setup Electrical panels Product Feed Pump Flocculant dosing pump Flocculant concentrator pump Complete flocculant system Screw for solids discharge Documentation Operation Manual Electrical diagrams Spare parts list Product Type Sludge In your state

Key data: 530 mm

KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...

Derinder Weber Type: ASC 460 Engine power : 1.1 kW Connected load : 400V/50 Hz/16 A Weight: 315 kg Dimensions: Width 910 x Length 890 (with bands 1800 mm) Thickness adjustment : from 0 - 15 mm Spring-loaded cutting system Pressure roller automatically adjusts to the cutting height Max. product setting 90mm Feeding and discharge conveyor with quick-release device Cleaning : Disassembly/assembly of all product-carrying parts without tools Integrated crate support Request a quote INTER-WIBA Sp.j. Ul. Krakowska 263 Pl 43-305 Bielsko-Biała NIP PL547-17-47-669 Phone 0048/33 812 58 60

Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling quantity: 180l / 180l Temperature +70 / +70 °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 54 A 400 V Year of construction: 2009 Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

Ref. -No.: 10142 Manufacturer: TIBO Year of construction: 2002 Type of control: CNC Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: - With equipment

Bous Waschfix 70/T3 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix 70/T3 WSA Extras: Ultra-fine filters Draining pump Filter monitoring More items - new and used - can be found in our shop! International shipping costs on request!

Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Usable space: 700 mm Filling quantity: 280l / 280l Temperature +70 / +70 °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total consumption: 84 A 400 V Year of construction: 2014 Extras: Ultra-fine filters Draining pump More items - new and used - can be found in our shop! International shipping costs on request!

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Drilling diameter 3-25 mm in ELB Drilling depth in one stroke (mm) 810 with resetting 1,200 Tapping up to M20 – larger by milling Manual tool changer Spindle holder SK 40 altv. HSK 63 Drive power 5.5 kW / ED 100 Travel X (longitudinal) 1,050 mm Travel Y (vertical) 800 mm Table load up to 2,500kg Table size 1,000 x 1,500 mm CNC rotary table 0-360° manual

FLADDER 200/GYRO-1000 VAC deburring machine was built in 2018 in Denmark by Fladder Danmark A/S. The machine, designed for the precise removal of burrs, edge rounding and surface finishing of metal parts, is an excellent solution for both small and large production plants. The combination of proven solutions with reliable components ensures high machining repeatability over the entire service life. The finishing process is performed fully automatically by conical 6 spindles, arranged in pairs on a gear head. The spindles simultaneously rotate around their own axes and perform an orbital movement, enabling machining in all directions. This design guarantees a uniform surface finish regardless of how the workpiece is positioned on the conveyor belt. Each spindle is additionally equipped with the Lock-it system, which facilitates the fitting and balancing of the abrasive brushes. The  ...

Syspal fully enclose tote bin tipper Fully working 16a 3 phase plug 2m tip height All failsafes

Movidyn inverter and motor

Max Drilling diameter : 46 mm Max Drilling depth: 1000 mm Table dimensions: 1200 x 700 mm x mm Spindle speed 4000 rpm Spindle power: 7.5 kw

Length 3500 mm Stainless steel structure Complete with   - Side guides - Support feet - N° 2 adjustable speed motors - Chains width 82.6 mm - Motorized device with idle rolls for round bottle sliding

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

A two-station tube deburring machine is offered. Tube diameter: 8mm. Processing stations: 2. Including deburring tools and control cabinet. An on-site inspection is possible.

Multivac R 230, year of manufacture 2001, film width 355 mm, draw-off length 210 mm, free loading section of 1,6 m, MC96II control with LCD monitor, 10 mm side trim, two cross-cut guillotines, height-adjustable discharge conveyor, central chain lubrication, new servo inverter for chain feed, Vario tool with interchangeable formats. Format: 1.1 . 335 mm x 210 mm 2.1 - 167.5 mm x 210 mm 2.2 - 167.5 mm x 105 mm 3.1 - 111.66 mm x 210 mm Total length of the machine 5,15 m Operational and wear parts replaced.

Derinding machine Maja Dimensions: 70x85x120cm

Skinning machine Maja Dimensions: 70x85x120cm

Power: 650 Watt tank capacity: 5,5 l length: 515 mm width: 430 mm height: 825 mm weight of the machine ca.: 36 Kg Professional 650 watt construction dryer Recommended room size 40 - 50 m², height max. 2.6 m Sound pressure level approx. 52dB Dehumidification capacity 28 L/D - 51 L/D The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered for sale is a Gildemeister tool presetter. Max. tool diameter: approx. 350mm, max. tool length: approx. 350mm, tool holders: ISO 40 / ISO 50. Foot pedal included. The control was replaced with Orion in 2021. Calibration and maintenance in 2023. Dimensions X/Y/Z: approx. 1100mm/650mm/840mm. An on-site inspection is possible.

Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme erfolgt bei Dünnband auf den Spulen und dickeren Bändern in Prismen ode ...

Maja Skinny II, skining and derinding machine, CE-conform execution, year 2019, power supply: 3 Ph, 400 V, 50 Hz, 2.0 A, 0.75 kW, cutting width 434 mm, with infeed conveyor, net weight approx. 190 kg, refurbished condition

range L-W-H: 390 x 270 x 760 mm corner cutter: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fuji GOS Flat Panel WLAN Detector FDR ES G35 Size: 35x43cm Model: DR-ID 1270 Year of Make: 2020 Technology: Gadolinium Oxysulfide (GOS) Flat Panel - good image quality at moderate doses Accessories: Charging station with 2 batteries, workstation, documents and software Typical applications: Thoracic images, abdominal overviews, skeletal images (extremities, spine, pelvis), overview diagnostics in the emergency room Condition: used, in good technical and optical condition Areas of application: replaces classic imaging plates (CR) and delivers instant digital images, can be used between different workstations without changing cables, fits into almost all standard bucky systems • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. • You buy the system in "IS ...

Dimensions (L/W/H): 97x83x131 cm accessories and equipment:: 1 for PM 74 and SM 74 +version never ussed! include new rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper size: 102 x 142 cm dimensions of press (L x W x H): 250x190x220 cm weight: 250 kg serial no.: M-0514-005-05/05-08 frequency: 50 Hz voltage: 400 V palletising unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.

Cito System for SM 52 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial no.: 1800 Dimensions (L/W/H): 70x70x120 cm Wire-O-System (closer only) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition

GEO-FENNEL FN 24 Automatic Optical Leveling Device For sale is a used Geo-Fennel FN 24 leveling device from company stock. Manufacturer: Geo-Fennel Model No.: FN 24 Technical data: 24x magnification Lens diameter approx. 35 mm shortest target distance approx. 0.3 m automatic compensator Compensation range ±12' Leveling Accuracy ±0.5" average error at 1 km double leveling approx. ±2 mm Horizontal circle 360° / 400 gon IP54 protection Robust metal housing Scope of delivery: Geo-Fennel FN 24 Transport case Other accessories according to illustrations Condition: Used condition with signs of wear due to age and use. The exact scope of delivery corresponds to the photos. Location: 71254 Ditzingen-Heimerdingen, Germany. Price: 129 € net VB plus VAT Prior sale and errors excepted.

Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.

Deburring machine manufactured in 2008. This Costa LEVIGATRICE MSH3 CCVC 1350 features a working width of 1,350 mm and accommodates workpiece thicknesses ranging from 0.5 to 250 mm. It is equipped with inverter-driven motors, a vacuum system, and belt cleaning blowers. If you are looking to get high-quality deburring capabilities, consider the Costa LEVIGATRICE MSH3 CCVC 1350 machine we have for sale. Contact us for further details.

Deburring machine manufactured in 2006. This TIMESAVERS 41-SERIE-900-WW features a working width of 900 mm and a maximum grinding height of 60 mm. It includes an abrasive belt dimension of 1900 × 930 mm and a rotating disc diameter of 1220 mm. If you are looking to get high-quality deburring capabilities, consider the TIMESAVERS 41-SERIE-900-WW machine we have for sale. Contact us for further details.

Stream Delivery Heidelberg SAK 66 Schuppenauslage - Stream Delivery Heidelberg SAK 66 Year 2004 - Serial-No. 103375 Format / Sheet Size min. 100 x 100mm - max. 660 x 450mm Einlaufhöhe / Infeed high 360-940mm

Vertical Press Delivery Heidelberg VSA-66/M.D Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66/M.D Year 2000 - Serial-No. 702101/00-292080 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device

Lederschärf Apparat / Leather Sharpening Device Schärffix Schärf-Fix 80 Leather Sharpening Device Schärffix Schärf-Fix 80

Siemens combined X-ray recording and fluoroscopy device Iconos R 200 with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0,6/1,0 Digital image processing Fluorospot Compact Sirecon 33-4 HDR image intensifier • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactur ...

SOUND TOP ENERGY 250 – COSTAN + MIAMI 250 AHT ADVS Built-in refrigerated wall suitable for placement above freezers. Increase in sales space while maintaining the same footprint on the ground. Used and REFURBISHED product. Latest generation products, LED lighting and years of production from 2016. Dimensions: Length: 250cm Depth: 110cm ( included the freezer Miami 250 ) Height: 230cm Technical details: Equipped with Automatic Defrost Inverter. R290 Propane Gas. LED Lighting. Plug-in with Shuko plug. Operating temperature: BT -18C° / -25C° | TN +2C° / +6C° Net capacity: 1450 Lt. ( total capacity Sound Top 250 + Miami 250 ) Power input: 220 Volt. All the items are sold refurbished, tested and ready for use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT is refurbished, freezer line is tested and cleaned internally and externally. Ready to use.

Description: AHT MIAMI FREEZER 250 Model: MIAMI 250 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 2300/2500 mm Depth (inside / outside): 720/850 mm Height (front/external access): 770/830 mm Volume (net): 850 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami 250 AHT tested but not cleaned and refurbished.

Description: AHT MIAMI FREEZER 185 Model: MIAMI 185 R290 gas Temperature range: -18°C to -25°C / 0C° to +2C° depending on the desired type AUTOMATIC defrosting Danfoss INVERTER Technology LED Lighting FREEZER technical details: Length (inner/outer): 1770/1850 mm Depth (inside / outside): 830/990 mm Height (front/external access): 770/830 mm Volume (net): 650 litres Power consumption (at 25°C) 5.9 kW/24h Power: 450/500 W Refrigerant: R290A Each product Miami is tested but NOT REFURBISHED

Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes

Display: microset DPS, an on-site inspection is possible, without power.

PE-storage tank with centrifugal pump and UV-unit for germinating fresh water.