uv used for sale

UVV maintenance according to BG guideline BGR 500 Pradler Maschinen Service & Electrical Engineering Recognised maintenance technician On-site inspection , Test report Creation , Sealing Occupational safety (trailing measurement safety distance ) Operational safety according to DGUV regulation 3

: . max. swing diameter: 350 mm centre distance: 1000 mm : 1980 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU227T233 LocationBarneveld MakeUVA Packaging TypeNEWTON 400 I No.2003517 Year of construction2003 Main Features MaterialStainless steel Specified Features - Powder filler Bag fillercheck Pneumatic fillingcheck Dosingmax. 3 kg Capacitymax. 120 bags/min. With motorcheck Information Mounted in framecheck With switchgearcheck Total height2,6 m Weight950 kg CEcheck Floorspace2,2x1 m Extra SpecificationsTechnology Intermittent Motion Bag width 100-400 mm Bag width, block bottom 60-270 mm Front to back, block bottom 50-140 mm Bag length 600 mm Power consumption 10/12,5 kVA Air requirements 6 bar Maximum film roll width 840 mm (XL 1040) Maximum film reel diameter 700 mm Core diameter 76 mm or 156 mm Maximum machine output 120 bags/min. Machine weight approximately 950 kg Powder fillersPBB-UVAPackaging machines > Powder fillersBrand > PBB-UVA What you can expect f ...

Alfa Laval Alfa Laval UVPX 307 AGT 14 separator centrifuge oil fish , olives Alfa Laval UVPX 307 AGT 14

Lamp Base, Single Ended Lamp Socket, with cable VEOLIA, AQAFINE UVAFSP200838 47520-3 Cable length: approx. 2.4 m ( 8 foot ) New ! Dimensions ( packaging ): 200 x 120 x 30 mm

Compression Nut VEOLIA, AQAFINE UVAFSP200582 40357 Diameter: Ø 25 mm Material: Stainless steel ( 316L ) New ! Dimensions ( packaging ): 160 x 110 x 40 mm

Lexus car, type: LS600H L, model: UVF46L-AEXGHW, VIN: JTHDU46FX05009962, year of construction: 02/02/2009, fuel: benzine, EURO 4, mileage: 447913, official Lexus dealer serviced, last service: 26/04/2022 - 401086 km.

Checked and ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Automatic case packaging machine (rebuilt in 2012) for american cases. Machine including feeding system, 2 formats (incl. Seidenader camera vision system), and other accessories. Furthermore including exit belt with PAGO labeling system.

Electric / control cabinet As good as new

Electric control cabinet hardly used , as good as new Price plus VAT

Part No.: 42.35.53 // S. No: 3.278-870805-1 Equipment / Additional information Technical data and description: see pictures

Used decanter centrifuge made by Alfa Laval, model: UVNX 414, worked on olive oil approx. 6 years, working condition.

Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

JenActUV UV Torpedo conveyor Model: UVTCONV500 Serial: 26557-PO1 Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

4-column press make FIBRO FISCHER - BRODBECK type UVOS 63Machine -No: 12-306-08, built in 1964Press force: 63.6 tRetraction force: 33 tOperating pressure: 250 AtuTable surface: 500 x 750 mmClear dimensions between the columns: 260/530 mmStroke: 350 mmInstallation height: 600 mmOutside dimensions approx: 1400 x 750 x 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Feed length - 0.1 - 6500 mm Width 20 - 300 mm Belt thickness 1.0 - 3.0 mm Material Quärschnitt 500 mm2 motor - 2,2 kW Complete documents more info on request

x-travel: 1600 mm y-travel: 600 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m Brand: Unisign Type: UV 4000 CNC brand: Siemens CNC model: Sinumerik 840 D Year of make: 2007 Vertically Table length: 2.500 mm Table width: 600 mm Number of pallets: 1 X: 1.600 mm Y: 600 mm Z: 500 mm Preparation for 4th axis Clamping possibility 4th axis: 1.660 x 200 mm Spindle taper: BT40 Tool changer: 51 Maximum speed: 12.000 RPM Max. workpiece height: 690 mm Chip conveyor Machine weight: 6.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thermal CTP Cron CTP TP6032 UVP H Tiff catcher Aged 2022 Produced around 20.000 quadrat meter pro year Min size: 450 x 370 mm Max Size: 1524 x 1200 mm without RIP 32 Laser channels Speed 11 plates per hour Used the Sonora plates

- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

Wsk Kraków UVPX 207 Centrifuge / separator Centrifuge, a separator, centrifuge UVPX 207 UVPX 207 Wsk Kraków UVPX 207

pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Manufacturer: Hymmen UV Trockner, Type: UVK, Year: 2004, Work piece width min-max mm: 1300, Number of lamps: 3, kW power 1 lamp: ca.10, Lampen gerade eingebaut: yes, Adjustable: yes, Power per lamp watt UV: 80, Conveyor lenght mm: 3450, Outer belt width mm: 1800, Working hight approx mm: 60, Feeding speed m/min: 5-25, Conveyor: Band, Drive power kW: 1,5, Year :2004

Manufacturer: Cefla, Type: UVM Superfokus, Year: 2014, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-60, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: ca.16, Lampenlänge mm: 1450, Gesamtlänge UV Modul mm: 3000, Lamps straight installation: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Conveyor: Rolle, Drive power kW: 0,75, Through running hight mm: 90, Feedin speed m/min: 3-5, Year :2014

Alfa Laval UVPX 307 AGT 14 Separator Centrifuge Oil Fish, Olives 5750l/h Motor 5.5 kW

Biosan chamber The chamber was purchased in 2017, efficient, not used. The UVC/T-M-AR is a chamber designed for clean work with DNA samples. The chamber provides protection against contamination. The UVC/T-M-AR model is a table-top model, made of a metal frame and a stainless steel work surface. The chamber is equipped with an open UV lamp installed in the upper part of the chamber. UV radiation from an open lamp disinfects the working surface by deactivating DNA / RNA fragments within 15-30 minutes of exposure. A digital timer controls the exposure time. The white light lamp provides proper illumination of the work surface. The chamber is equipped with a flow UV antibacterial lamp, which ensures continuous decontamination inside the chamber during operation. This lamp is recommended for working with DNA/RNA amplicons. The UV recirculator contains a lamp, a fan and dust filter ...

UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface lamp -Manufacturer: Hönle, UV dryer system for drying paints, varnishes and plastics -Type: Uvaprint 420 HPLK -Quantity: 4x UV dryers available -Price per piece -Dimensions: 600/355/H140 mm -Weight: 16kg/piece

Screw Compressor Model: UVG30-20.5WG-INV (WP-SF-BV-CM-BY2-PL-PB) Ex Medium: Biogas El. Power: 37 kW Operating pressure: 20 bar g Inlet pressure: 0.003-0.15 mbar (g) Flow rate: 104 Nm³/h max. H2S concentration:

Used freezer cell KOMA, type: - Large freezer cell for 55 to 60 rack trolleys - down to -25°C - Cooling capacity: 25.1 kW - Condition: very good - Location: Germany Viewing possible on request.

Ctp Platesetter CRON Model TP RRP 6332 year 2022 Min: size: 450 x 370 mm MAx: 1524 x 1200 mm with Stacker

General SKU079B444 LocationBarneveld MakeAviteq Vibrationstechnik TypeOA-1150/350-UVB No.6300095-001 Specified Features - Vibro feeder Material finishPolished inside Main Features MaterialStainless steel Length1150 mm Width350 mm Vibro feeders MaterialStainless steel Vibro feeder(1x) Feeder width350mm Feeder length1150mm Feeder height275mm Closedcheck Inlet355x355mm With motor0,3 KW, 230/400 Volt (2x) Information Mounted on framecheck Floorspace1,8x0,9 M Total height1,0 M Weight380 KGVibro feedersAviteqConveying systems > Vibro feedersBrand > Aviteq What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

PESTER PEWO UVP 3 BALER Side loading case packing machines are designed to load products in open boxes placed on their side. Thanks to a feeding system, the products are placed in the correct arrangement of the pack and then loaded horizontally into the open box placed on the side. Sideloading case packers are available in various frame sizes and we offer a wide range of infeed systems for handling various primary products such as cartons, bags or trays. With a compact base, sideloading case packers allow operators to access the interior of the machine from the ground. Size changes can be done manually in less than ten minutes, without the need to change parts, or an optional auto-size change function can be added. In addition, flat boxes can be inserted directly from the pallet, eliminating the need for the operator to replenish them. PESTER PEWO FORM UVP3 case packer used wit ...

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.

From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---

weight of the machine ca.:11 t dimensions of the machine ca.:3x4x4,4 m clamping length max.:1000 mm Automatic Induction-Camshaft Hardening Machine. Last production on this machine Camshaft with lenght 4438,8 mm. Power / Frequency 3 x 140/56 kW / 10/200 kHz Distance between two tcenters is about 1300mm. But induction axis moves 900mm.

pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

Pressure:080 t throat:380 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:472 mm table surface area:840 x 610 mm table height over floor:800 mm passage to the back:520 mm ram surface:650 x 400 mm ram adjustment:70 mm power capacity:7,5 kW weight:6,9 t Dimensions (WxDxH):1,1 x 2,15 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical ram counterbalance:pneumatic clutch-/ brake combination:pneumatic

pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary

pressure:1000 t distance between columns:3030 mm stroke:350 mm Distance table/ram, max. stroke up, adjustment up:1400 mm table surface area:3000 x 2000 mm table height over floor:430 mm side window:1450 x 1400 mm ram surface:3000 x 2000 mm speed down:300 mm/s speed up:340 mm/s working speed:18 - 44 mm/s return capacity:120 t oil volume:4400 l width with platform:4950 mm power capacity:2 x 90,0 + 10,0 kW weight:87,0 t Dimensions (WxDxH):4,35 x 3,65 x 7,55 m height over floor:6,05 m height beneath floor:1,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

pressure:200 t distance between columns:1650 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1600 x 1250 mm die cushion capacity:80 t die cushion stroke:300 mm die cushion area:1300 x 900 mm table height over floor:800 mm ram surface:1600 x 1250 mm oil volume:ca. 2000 l power capacity:43,0 kW weight:25,0 t Dimensions (WxDxH):2,9 x 2,3 x 5,8 m height beneath floor:0,85 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 § 20

pressure:350 t distance between columns:1350 mm stroke:900 mm distance table/ram, max. stroke up, adjustment up:1300 mm table surface area:1300 x 1000 mm pressure of drawing cushion in table:100 t stroke of drawing cushion in table:380 mm die cushion area:350 x 285 mm capacity of ejector in ram:25 t ejector stroke in ram:200 mm table height over floor:750 mm ram surface:1300 x 1000 mm speed down:500 mm/s speed up:160 - 470 mm/s working speed:16 - 44 mm/s drawing speed:57 - 160 mm/s return capacity:32 t oil volume:1700 l power requirement:91,0 kW Dimensions (WxDxH):3,75 x 2,8 x 7,2 m height over floor:5,28 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick drawing cushion in table:hydraulic ejector in ram:hydraulic ram interlocking:in TDC foundation pit:necessary

Pressure:500 t distance between columns:1550 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1200 x 1300 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:150 mm die cushion area:950 x 950 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:780 mm/s working speed:105 mm/s oil volume:4000 l power requirement:263,0 kW weight:45,0 t Dimensions (WxDxH):3,3 x 3,3 x 6,1 m height over floor:6,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable