british flag
Resale Logo

Category 842: paper converting: die cutters

back back back
 banner advertisement information international brokers in used printing and paper converting equipment  Palm Brokers ApS  http://www.palmbrokers.dk 
banner logo
start page > printing machines > all paper converting: die cutters > results
 
93 offers order by
post used machinery: registration     
No. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
page 1 > 2 3 4 5
124913188
BOBST SP 76 BM Foilmaster
Punches

Bobst SP 76 BM Foilmaster, 2001 Ref.Nr: 2495 manufacturer model of Bobst SP 76 BM Foilmaster year built: 2001 Max sheet size: 760 x 560 mm availability: immediately condition: good price: on technical request spezificat ...
used machine
 
Bobst SP 76 BM Foilmaster, 2001
Ref.Nr: 2495 manufacturer model of Bobst SP 76 BM Foilmaster year built: 2001 Max sheet size: 760 x 560 mm availability: immediately condition: good price: on technical request spezification: â?¢ hot foil stamping, cutting & creasing, â?¢ â?¢ embossing â?¢ CENTREL INE system for quick job changeovers, â?¢ Bobst electronic m INE operating system CUBE, â?¢ pull Sidelay, â?¢ 12 independent heating zones, â?¢ foil advance device, â?¢ 1 foil advance Shat with 6 rollers.
â?¢ Lateral foil guiding device, â?¢ 1 Motorizes foil tension shaft
2001
Price  
    request
122974099
BACHER 2005
Plate punchers anb plate benders

max. plate width: 80 cmstamp width: 425 mmserial no.: 174 plate punch autoplateThis ad was created with MODUL MWS - the software solution of LogoTech.

 
max. plate width: 80 cm
stamp width: 425 mm
serial no.: 174
plate punch
autoplate



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
124861971
GALLUS TCS 250
Label Printer

Max mechanical machine speed: 11000cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², leng ...
used machine
 
Max mechanical machine speed: 11000cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10509mm, height: 2806mm, weight: 9.5t.
2000
Price  
  DE   request
71557801
ECONO ECONO-CUT-STANZTIEGEL
DIE CUTTER

SIZE 106,68 x 149,86 CM, Machine is still in pro- duction, die-cutting-re- sults are ok and machine can be tested! for normal work nothing must become exchanged. Elmec-clutch, Only for very difficult works, a few (3) thi ...
used machine
 
SIZE 106,68 x 149,86 CM, Machine is still in pro- duction, die-cutting-re- sults are ok and machine can be tested! for normal work nothing must become exchanged. Elmec-clutch, Only for very difficult works, a few (3) things should become exchanged: Plate
1995
Price  
  DE   request
124861958
NEBIOLO ATHENA
Punching machines

NEBIOLO ATHENA SIZE 56 X 78 FOR DIE CUTTING WITH THIS MACHINE YOU GET ANOTHER FOR FREE NEBIOLO SUPER EGERIA 36 X 58 SPECIAL PRICE
used machine
 
NEBIOLO ATHENA SIZE 56 X 78
FOR DIE CUTTING

WITH THIS MACHINE YOU GET ANOTHER FOR FREE
NEBIOLO SUPER EGERIA 36 X 58

SPECIAL PRICE
 
Price  
  IT   request
124729937  
KAMA TS 96-1

ref. D 17 Kama TS 96-1 Format 66x96 cm, year 1971, automatic die cutter, no stripping, format min. 35x50 cm, 3 500 s/h, in production, price: 11 000 EUR FCA
used machine
 
ref. D 17
Kama TS 96-1
Format 66x96 cm, year 1971, automatic die cutter, no stripping, format min. 35x50 cm, 3 500 s/h, in production, price: 11 000 EUR FCA

1971
11,000 €  
  PL   request
124697535
BOBST SP1420E
Autoplaten / Die cutter

Autoplaten/die cutter Bobst Model SP1420E Year 1969 Sheet size 500x700 - 1020x1420 mm Substrates 200 grams till 5 mm thickness (board up to 3 mm) Diecuting power 600 tons Max mech. speed 4.500 sheets per hour Det ...
used machine
 
Autoplaten/die cutter
Bobst
Model SP1420E
Year 1969
Sheet size 500x700 - 1020x1420 mm
Substrates 200 grams till 5 mm thickness (board up to 3 mm)
Diecuting power 600 tons
Max mech. speed 4.500 sheets per hour
Details with stripping station, elevated 300 mm, comes with many chases, plates and plenty of accessories
extra belts on the feeder to process curved substrates
Condition chains & grippers & belts have been replaced roughly 1.5 years ago
Available direct
1969
Price  
  NL   request
124630506  
HEIDELBERGER OHT A4
Stamping crucible

with Chase and accessories Spare parts book and oil drip tray Weight approx. 1.5 t
used machine
 
with Chase and accessories
Spare parts book and oil drip tray
Weight approx. 1.5 t
 
Price  
    request
124581897
HEIDELBERG OHT
Punching machines

Cleaned Top condition
used machine
 
Cleaned
Top condition
1970
Price  
    request
124581883
HEIDELBERG S-cylinder
Punches

Standard accessories Standard equipment TOP condition
used machine
 
Standard accessories
Standard equipment
TOP condition
1955
Price  
    request
124487579
KAMA TS 102

Die cutting machine Kama TS 102 - year 2002 - max. size 720 x 1020 mm - min. size 370 x 480 mm - max. cardbord thickness 1,8 mm - speed 4000 sheets/h - machine still in production
used machine
 
Die cutting machine Kama TS 102
- year 2002
- max. size 720 x 1020 mm
- min. size 370 x 480 mm
- max. cardbord thickness 1,8 mm
- speed 4000 sheets/h
- machine still in production
2002
Price  
  RO   request
124457556
KAMA TS 105
Punching machines

max. size 74 x 105 cm age 2006 sheet feeder MABEG highpile feeder SPS control sensoric front lay control 1 closing frame 1 special closing-frame 2 punching plates 4+1 changing system high pile delivery flexibl ...
used machine
 
max. size 74 x 105 cm
age 2006
sheet feeder MABEG
highpile feeder
SPS control
sensoric front lay control
1 closing frame
1 special closing-frame
2 punching plates
4+1 changing system
high pile delivery
flexible food board at delivery
Delivery time: immediately from stock
Ref: KA170626A

Please ask for price.

We ship and install worldwide!
2006
Price  
    request
124224271
HEIDELBERG SBG 56x77
Punching machines

Heidelberg SBG 56x77 year 1966 Die cutting
used machine
 
Heidelberg SBG 56x77
year 1966
Die cutting
1966
Price  
  IT   request
124174179
BOBST SP 104 ER
Punching machines

Max sheet size 1040 x 740 mm, min. size 400 x 350 mm, stripping station, blanking, centerline, non-stop feeder, non-stop drop, pulling brand left, 41 cm fully automatic pallet change system, machine hours 25.703, Bobst c ...
used machine
 
Max sheet size 1040 x 740 mm, min. size 400 x 350 mm, stripping station, blanking, centerline, non-stop feeder, non-stop drop, pulling brand left, 41 cm fully automatic pallet change system, machine hours 25.703, Bobst cube controller, höhergestellt only, Micrometer adjustment, electric double sheet control, 2 upper frame with quick release, 1 plate 4 mm, 1 upper stripping frame, 1 lower stripping frame, 1 upper frame of benefit wall, 1 lower frame of benefit wall, Max machine speed 8000 bow / H, maximum punching force 250 tons, processable materials: paper min. 80-90 g / m², cardboard up to 2000 g / m², corrugated board up to 4 mm cleaned, tested.
2002
Price  
    request
124104417
WUPA PS 5.2
Punching machines

Wupa PS 5.2, 1977 Ref.Nr: 2458 manufacturer Wupa model PS 5.2 year built: 1977 Max sheet size: 900 x 1200 mm availability: immediately condition: good price: on technical request spezification: â?¢ machine wh ...
used machine
 
Wupa PS 5.2, 1977
Ref.Nr: 2458 manufacturer Wupa model PS 5.2 year built: 1977 Max sheet size: 900 x 1200 mm availability: immediately condition: good price: on technical request spezification: â?¢ machine what overhauled on 1996
â?¢ stripping station
â?¢ pressing force 500 T
1977
Price  
    request
124071538
WUPA wupa 3.4

70X100 cm stripping control unit is out of order

 
70X100 cm
stripping
control unit is out of order
 
55,000   
  BG   request
123983369
JAMES BURN P33
Hollow punches

James Burn alpha doc puncher P33. Series:M33 In good condition. 2 punching tools. We ship worldwide.
used machine
 
James Burn alpha doc puncher P33.
Series:M33

In good condition. 2 punching tools.

We ship worldwide.
2000
Price  
  SE   request
123950258
IIJIMA BF -1000S
Punching machines

IIJIMA BF - 1000S, 1977 Ref.Nr: 2445 manufacturer IIJIMA model BF - 1000S year built: 1977 Max sheet size: 710 x 1020 mm availability: immediately condition: good price: on technical request spezification: â?¢ ...
used machine
 
IIJIMA BF - 1000S, 1977
Ref.Nr: 2445 manufacturer IIJIMA model BF - 1000S year built: 1977 Max sheet size: 710 x 1020 mm availability: immediately condition: good price: on technical request spezification: â?¢ the machine is intended for the cutting and embossing complete with automatic s tripping â?¢ manufactured: in 1977, partly renovated 2014 - ready for production
â?¢ Origin Japan â?¢ Germany (Mabeg autmatic feeder)
â?¢ Front ripping
â?¢ Counting unit SK 103
â?¢ Extra hardened steel platen
â?¢ Extra magazines for the tool
â?¢ El: 380 V 50 Hz 3.fas
â?¢ Electric contact & fuse panel in separate unit
â?¢ Floor space required: 2.5 x 6.5 m
â?¢ The machine can be inspected on request
1977
Price  
    request
123835060
KMK 106 MTF

Maximum format: 1060 x 770 mm Min. format: 450 x 370 mm max punch format: 1050 Ã? 750 mm Maximum format of embossing: 1050 Ã? 750 mm gripper margin: 8-17 mm paper weights: 90-2000 g / m2 (carton) 0.1-2 mm ...
new machine
 
Maximum format: 1060 x 770 mm
Min. format: 450 x 370 mm max punch format: 1050 Ã? 750 mm
Maximum format of embossing: 1050 Ã? 750 mm gripper margin: 8-17 mm paper weights: 90-2000 g / m2 (carton) 0.1-2 mm (box)? 4 mm (corrugated board) maximum punching force: 300 T
Maximum speed: 7500 sheets per hour
Max marking speed: 6500 sheets / hour individually heated zones: 12 heated zones (each zone can be heated independently up to up to 200 degrees) Max Folienlängsdurchmesser: 250 mm maximum stack height display: 1200 mm maximum stack height investors: 1350 mm
Main motor power: 11 kW
Machine power: 46 kW
Weight: 17,000 kg
Air requirement: 0.6 MPa, 0.37 m3/min
Dimensions: 6050 x 4200 x 2260 mm
new
Price  
    request
123817426
KMK HT 1050A
Punching machines

Maximum punching format: 730 x 1040 mm Max pressure: 300 tons Thickness: 0.1-2 mm Punching accuracy: ± 0.1 mm Maximum Investor pallet height: 1280 mm Maximum speed: 7,500 sheets / hour Machine weigh ...
new machine
 
Maximum punching format: 730 x 1040 mm
Max pressure: 300 tons
Thickness: 0.1-2 mm
Punching accuracy: ± 0.1 mm
Maximum Investor pallet height: 1280 mm
Maximum speed: 7,500 sheets / hour

Machine weight: 15,000 kg
Dimensions: Width length 260 cm height 582 x 386,5 x
Power: 16 kw
new
Price  
    request
page 1 >
You didn't find your wanted machine? to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country