Manufacturer:
(Category: 842)
Die-Cutting Machine with Stripping Station Heidelberg Promatrix 106 CS Year of Manufacture: 2021 Materials Supported Paper (min.): 90 g/m² Solid Board (max.): 2,000 g/m² Corrugated Board (max.): 4.0 mm Performance Data Sheet Size (max.): 760 × 1,060 mm Sheet Size (min.): 300 × 350 mm Die-Cutting Pressure (max.): 260 t Machine Speed (max.): 8,000 sheets/h Stack Heights (including pallet) Feeder Stack Height (max.): without non-stop operation: 1,500 mm Feeder Stack Height (max.): in non-stop operation: 1,200 mm Feeder Stack Weight (max.): 1,500 kg Delivery Stack Height (max.): 1,400 mm Stack weight (max.): 900 kg, Construction year: 2021, Sheet format (max.): 760 × 1,060 mm, Sheet format (min.): 300 × 350 mm, Machine speed (max.): 8,000 sheets/hour
Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.
used
Heidelberg Embossing Crucible TP, Machine Number T169693+ Heidelberg Embossing Crucible TP,T191298, Machine is in good condition, immediately available Rebevvikfer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
used
Swivel arm punch Sandt, in good condition, immediately available Robsvvhfuer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
sheet width: - mmplate length: - mmplate thickness: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures ...
Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible.
Printing speed: 325m/min, machine dimensions X/Y/Z: 450mm/360mm/530mm, weight: approx. 25kg, operating hours: 4143h. Documentation available. On-site inspection is possible. Expected to be available from August 2025.
Bobst SP 1650 E Max.Size: 11501650mm Min.Size: 570850mm Max Speed: 4500sh/h Year 1970 In good production condition.
Bobst SP 130 E Year 1985 Max.Size: 920x1300mm Min.Size: 450x580mm Max Speed: 7000sh/h Max. Cutting force: 500T center line Immediately available.
Reference ID PP-47933 Category Flexo Printer Manufacturer Bobst Model 160 A-Matic and Flexo 160 Year Built 1994 Color 2 Speed 6500 sheets/h Max. size 1,600 x 1,100 mm Min. size 600 x 520 mm Condition Good Location Europe Availability - Machine Description BOBST 160 A-MATIC CUTTING MACHINE Sheet sizes: - Maximum cutting size: 1,600 x 1,100 mm - Minimum cutting size: 600 x 520 mm Cutting size with front waste: - Maximum cutting size: 1,600 x 1,075 mm - Minimum cutting size: 580 x 492 mm - Gripper margin adjustable: 15 +/- 3 mm - Thickness of corrugated board up to 9mm - Thickness of solid board from 1mm - Cutting force, maximum: (400 tons) 4MN - Production speed: up to 6.500 sheets per hour Construction year: 1994 Production country: SWITZERLAND Voltage: 480 V Frequency: 50 Hz 2 COLORS UNIT BOBST FLEXO 160 Sheet sizes: - Maximum cutting size: 1,600 x 1, ...
Size: A4Technical details: Speed: 5500Power: 380 V 1,25 KWNet Weight: 1100 KGMeasurements: L1,68 x B1,24 x H1,85mEquipments:Skeleton chase: 260 x 350mmSpeed min.: 2.200 sph - max. 5.500 sphSize max. 260 x 380 mmLetter Press Tiegel - DIE CutterPunching force 40 tonsSize min.: 40 x 70 mmComplete with tools and accessories include frameStandard chase: 260 x 340mmMachines No T 184634 H
Size: 600 x 500 mmEquipments:Krause autofeed die cutterMax. Size: 60 x 50 cm (23 x 19 inch)
Size: A4Equipments:Letter Press Tiegel - DIE CutterPunching force 40 tonsSize min.: 40 x 70 mmStandard chase: 260 x 340mmSpeed min.: 2.200 sph - max. 5.500 sph
Completely overhauled ready for testing Machine Electronic device for sheet travel control Air conditioning for the electrical cabinet Gripper bars C.U.B.E. Bobst-electronic for managing the machine C.U.B.E. Bobst-electronic for managing the complementary equipment BM Main motor Feeder Pile-tray with handle allowing manual lateral correction of the pile during production SPECIAL SHEET BREAKER DEVICE. To push the sheets downwards, ensuring good stacking NON-STOP FEEDER MANUAL DEVICE Adjustable lateral blowers with Centerline references Suction unit with multiple adjusting Safety system for lowering the pile try KERSTEN ANTISTATIC DEVICE ON THE SHEET FEEDER FOR SHEET TRAVEL Introduction table Covered by antistatic steel stainless plate Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle 4 front lays, adjustable in p ...
max. format 75 x 105 cm Year of construction 2006 Automatic punching machine Computer control with touch screen max. 7,500 sheets/h (idle) Corrugated cardboard up to approx. 4 mm 2 side marks for drag or slide function 2 locking frames 2 Set of Clamping Frames for Stripping Tools Non-stop set-up and display Reading totalizer: approx. 28 million printing Operating hours 21,400 Delivery date: immediately Price on request. We supply and install worldwide.
Hakro hot foil installation on K offset cilinder from 1960. Electronically upgraded for higher production quality. More details on request.
Hot foil stamping machine with original installation on the GTP model. In production.
Platen press / Diecutter - clamp shell die cutter Make SR-Pack Model ML1500 Year 2003 Size 1000 x 1500 mm Details 2 chases, timer dwelling operated, pneumatic clutch, central lubrication Available Direct
Sheet format: max. 760 x 1060 mm, min. 300 x 350 mm Equipment: Stripping station, centerline, non-stop, micrometer adjustment, electronic double sheet control, sheet marking device, vacuum feed belts, drawing mark left, slide mark right, machine hours approx. 8 million punches, 1 die-cutting frame Quick-release frame at the top/bottom of the stripping station, raised position, max. machine speed 8,000 sheets/hour, max. die-cutting pressure 260 tons, materials that can be processed: paper min. 90g/m², cardboard / solid board max. 2,000 g/m², corrugated board up to 4 mm.
Punching Machine Punching Embossing Machine Manufacturer: Heidelberg Type: Promatrix 106 CS Year of Make: 2021 Min. sheet format: 300 x 350 mm Sheet format max.: 760 x 1,060 mm Machine speed max.: 8,000 Bg/h Punching pressure max. 2.6 MN / 260 t Materials and stacking height (incl. pallet) Paper min.: 90 g/m2 Cardboard / solid board max.: 2,000 g/m2 Corrugated cardboard max.: 4.0 mm Height of the feeder stack: without non-stop max.: 1,500 mm in non-stop operation max.: 1,200 mm Weight of feeder stack max.: 1,500 kg Without depaneling station Without MasterSet
max. format 72 x 106 cm Built in 1967 automatic punching cylinder Letterpress cylinder converted to a punching cylinder Stack Feeder Shed Feeder Stack delivery Delivery date: immediately Price on request. We deliver and install worldwide!
Hoza EMU Punch This machine is ideal for punching out small moulded parts made of paper, rubber or textile goods. It has a high pressing force and fits on any stable table. The cut is initiated via a two-hand safety control. Forged knives or strip steel cuts can be inserted into the machine. Knife stroke: 30 mm Max. die-cutting format: 150 x 100 mm Weight: approx. 150 kg Colour: hammered blue Dimensions: 450 x 360 x 600 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Reference ID PP-42880 Category Flatbed Die Cutter Manufacturer Bobst Model SPrintera 106 PER Year Built 2003 Color- Impression- Working Hours - Speed 12000 sheets/h Max. size 106 x 76 cm Condition Good Location Europe Availability December 2024 Machine Description Paper : min. 70 g/m2 Solid board (depending on the quality) : up to 2000 g/m2 Corrugated board (depending on the quality) : up to 4 mm Non Stop feeder and delivery 2x Stripping Powder register is new 2024 New controls Fully automatic feeders Semi-automatic delivery units
Hang Folder Grip Hole Eye Machine Automatic Hole & Eye Insertion Machine Type: 115 G3P Year of construction is not known. This machine has not been used for 10 years, and is in good condition
1955 A4 Size Standard machine Machine no.: 107297N Located: Germany Available: immediately
Fully automatic high-performance die-cutter Renz Kugler 341-2R for calendars and ring binders Technical data – Working width: 500 mm – Format area die-cut side: max. 500 mm – Format area unpunched side: max. 500 mm – Punching thickness: max. 3 mm per layer – Punching speed: 110 cycles – Paper feeding: automatic with non-stop paternoster feeder – Paper delivery: automatic in box delivery with vibrator – Paper grammage: min. 60 gr./m², max. 2 mm (restrictions due to paper grammage/quality are possible) – Register punching: yes (not included) – Interchangeable tools – Tool change requires only a few steps – fast format change thanks to manual adjustment wheels – adjustable edge spacing – Switchable punches – Space requirement: 3.30 x 1.50 m – Net weight 1580 kg
Stamping jar Simplacutter, 72 x 102 cm, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Die-cut crucible Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, immediately available We have two more Gietz models. Please request a quote. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
