other machines and plants used for sale (16,340)

Oil spill response systems Expandi Systems (a Swedish-Spanish manufacturer known for inventing the world's first self-inflating booms) are actively used in Europe to protect coastlines and eliminate accidents at sea. There are 4 standard sections of Expandi marine booms.

For sale is a robust industrial and dedusting vacuum cleaner RINGLER RI 332-D3.0 in used condition. Technical data: Power main motor: 3.0 kW Connection: 380 V / 3~ / 50 Hz Rated current: 6.5 A Speed: 2,870 rpm Serial No.: 89325 Vacuum gauge down to -250 mbar Filter cleaning via separate electric vibrator: Power: 0.05 kW Connection: 380 V / 3~ / 50 Hz Speed: approx. 1,300 rpm Equipment: Large storage tank Filter unit with electric vibrator Vacuum gauge Switching unit Mobile industrial version Suction hoses and pictured accessories Functional state: The industrial vacuum cleaner was put into operation when the picture was taken. A vacuum of approx. -232 mbar was achieved at the existing vacuum gauge (see photo). The electric filter vibrator was not tested separately. The following historical manufacturer's marking is on the devi ...

An Nd:YAG dental laser welding unit is offered. Manual welding chamber with hand opening, laser type: Nd:YAG laser, wavelength: 1064nm, max. pulse energy: 40J, max. average power: 30W, laser class: 4, control: analog and digital keypad control with display. Equipped with Leica stereomicroscope with binocular tube, footswitch, shielding gas connection, hand openings. Inspection by appointment is possible.

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible.

Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 1000 L -Operating pressure: 11 bar -Dimensions: 900/1000/H2350 mm -Weight: 322 kg

DYNAJET UHP 220 – Demonstration system Pressure: 2,800 bar / approx. 40,000 PSI Flow rate: 27 l/min Year of Make: 2021 Engine hours: approx. 633 hours High-pressure operating hours: approx. 350 hours Engine: Volvo diesel engine, 160 kW Condition: very good, ready for immediate use Included in delivery: 1 × high-pressure gun with lance, 800 mm 1 × omnidirectional nozzle including nozzle holder 1 × rotary nozzle 1 × high-pressure hose, 20 m, with quick-lock connection 1 × control cable, 30 m

High-pressure pumps Dynajet 500 me , NEW, Operating pressure: 500 bar, Flow rate: 15 l/min, Drive: electric 15 kW, 400 volts, Operating hours: approx: 1, Trolly, incl. accessories,

WOMA MK3 high-pressure system – 2,500 bar – DEUTZ Diesel – Year of manufacture 2009 For sale is a used WOMA high-pressure system on trailer chassis, built 2009. Robust industrial high-pressure system from WOMA with DEUTZ 6-cylinder diesel engine, suitable for professional high-pressure cleaning, surface treatment and industrial applications. Technical data high-pressure system: Manufacturer: WOMA Type: MK3-250M-P 18 Year of manufacture: 2009 Operating pressure: 2,500 bar Flow rate: approx. 26 l/min Drive power of the pump: 117 kW Drive speed: 1,800 rpm Design: mobile trailer system Net weight: approx. 2,250 kg Permissible axle load: 2,700 kg On-board voltage: 24 V DC WOMA Order No.: A2009/00279 CE marking Diesel engine: Manufacturer: DEUTZ Type: TCD 2012 L06 2V 6-cylinder diesel engine Power: 127 kW / 170 hp Engi ...

Technical data: Condition: New device Working pressure: adjustable from 170 to 350 bar Flow rate: 17–21 l/min Pump: Ceramic Triplex Plunger Pump Pump speed: max. 1,450 rpm Hydraulic power: 14 kW / 19 hp Engine: Honda 2-cylinder 4-stroke petrol engine Engine power: 16.4 kW / 22 hp Motor speed: max. 3,150 rpm Electric starter with engine oil pressure monitoring Fuel consumption: approx. 5.5 l/h Tank capacity: approx. 20 litres Water connection: GEKA High pressure connection: M22 × 1.5 Maximum water temperature: 40 °C Required water inlet pressure: 1.8–6 bar Dimensions: 79 × 79 × 99 cm Weight: 130 kg Chassis: Two-wheeler trolley with pneumatic tyres Item number: 1487050 Standard equipment includes a 10 m high-pressure hose, a high-pressure gun with an approx. 800 mm long spray lance, nozzle holder, 15° flat spray nozzle, pressure gauge, infinitely adjustab ...

Electric Hammelmann HDP 127 high-pressure system on trailer – 1,000 bar / 48 l/min – 110 kW For sale is a high-performance electric Hammelmann high-pressure system of the type HDP 127. The system is mounted on a braked trailer and equipped with a soundproof hood. Technical data: Manufacturer: Hammelmann Pump type: HDP 127 Year of manufacture of high-pressure pump: 2012 Trailer year: 2012 Operating hours: 3,693 h Maximum working pressure: 1,000 bar Flow rate: 48 l/min Built-in electric motor: 110 kW Power supply: 400 V / 50 Hz Engine speed: 1,500 rpm Pump speed: 440 rpm Plunger diameter: 30 mm Maximum water temperature: 40 °C Permissible total weight: 3,500 kg Tyres: 195/70 R15 103 K Ball Coupling Braked trailer Soundproofing enclosure The system is suitable for demanding industrial cleaning work, surface treatment and other professional high-pressure a ...

FQJ-1800 honeycomb board cutting machine was built in 2019 in China by SAN (QINGDAO) INTERNATIONAL TRADE CO., LTD. The machine is designed for cutting strips of honeycomb cardboard with a maximum thickness of 80 mm. The high cutting accuracy ensures repeatable dimensions of the elements, thus reducing material waste and increasing the efficiency of the production process. Honeycomb board is characterised by high rigidity, low weight and resistance to compression. Thanks to these properties, it is used as a filling material for interior doors, as well as a protective material for goods during transport. The FQJ-1800 is equipped with three blades that provide a clean, even cutting without damaging the characteristic structure of the material. The adjustable cutting speed from 0 to 50 m/min enables the operating parameters to be adapted to the type of honeycomb board being cut, ensuring  ...

Automated Nucleic Acid Extraction System (DNA/RNA purification)Magnetic bead technology (automated magnetic-bead separation)No (control PC and chemagic software not included)3 Calibration Plates

Incubator Shaker (stackable benchtop shaking incubator)2 units in a stacked configuration (photographed together)

COOLING TOWER, TRUWATER, TCS250C1B FRP square cooling tower , Dimensions of 2,500 mm x 2,500 mm x 4,250 weight of approximately 2,080 kg Commercial: Mainie Harun (mainie@topglove.com.my) Noor Syaida (noor_syaida@topglove.com.my) Technical: Muhd Syahir (mhd_syahir@topglove.com.my) Nik Faris (nik_faris@topglove.com.my) Incoterm: EX WORK Currency: USD

Friction feeder (friction feeder) with turret magazine Manufacturer: Rontech Type: MF-220 LDAVuSNMRpSv, RM Year of Make: 2005 Friction feeder: For the enclosure of brochures/booklets, etc. Speed max. 240 m/min Product width max. 90 mm Speed infinitely adjustable Laetus code reading with wt880 camera and bad ejection HMI Touch Screen Revolver Magazine: 16 stacking chutes for product W x L 53 x 100 mm, stacking height 440 mm Capacity range Stacking height up to 2m/min, individually up to max. 200 products/min Product condition at least 80 g/m² (paper) Positioning accuracy +/- 1 mm HMI Touch Screen Drive 230V/50Hz

Belt Checkweigher Manufacturer: Garvens Type: S 2 Year of Make: 2004 Machine Description Weighing range max. 300g Belt speed 10 – 40 m/min. Throughput max. 120 weighings/min. Center distances infeed conveyor/weighing conveyor/outfeed conveyor 600/200/600mm Belt width 120mm Resolution e = 0.1g Temperature range 0 – 40°C Load Cell BF8 Belt run from left to right Poor discharge with blow nozzle and collection container at the outlet for incorrect weight Height adjustable Infeed and outfeed belt as well as 2 treadmill rollers new Connection 100 – 240 V/50 – 60Hz Special equipment: Adjustable base frame (forwards / backwards) Compressed air monitoring Open lug control by means of sensor detection Poor discharge with blow nozzle and collection container on the infeed conveyor for open tabs Multi-coloured light column (traffic light) Maintenan ...

Maximum casting weight: 1,400 g Maximum mold size (W x D x H): 450 x 470 x 400 mm Inner chamber dimensions (W x D x H): 450 x 470 x 700 mm Chamber external dimensions (W x D x H): 900 x 600 x 860 mm Vacuum capacity of the pump : 25 m³ / h Evacuation time 1,013 >>0 hPa: 3 min Flooding time: 35 s Voltage: 230 V, 50 Hz Power consumption: 1.2 kW Accessories see photos 2x MEMMERT drying cabinets

Breitenbach Crusher

Breitenbach Crusher

Checkweigher Manufacturer: Loma Type CW 3 Weighing range 50g-6000g Belt length 300 mm Belt width 400 mm Belts need to be renewed

Metal Detector Manufacturer: LOMA Type IQ2 emc Belt width 20 cm Height of the passage 12 cm Documents available in German With conveyor belt and ejector

Checkweigher Manufacturer: Garvens Automation GmbH Type SL 2 DM Maximum load max. 100 g Documents available

DIESEL TANK Capacity: 8,000 L (approx.) Material: Steel Condition: Not in used for 4 years PLEASE CONTACT MS. NURFAZIERA (+6011-2361 6977) Located at F21 backyard

A Yaskawa robot cell for integration with CNC machines or production lines is offered. Robot type: YR-MH00005-E00, axes: 6, max. payload: 5kg, horizontal reach: 706mm, vertical working range: 1193mm, repeatability: +/-0.02mm, robot weight: approx. 27kg, control: Yaskawa DX100. Equipped with pneumatic Schunk gripper, SMC air preparation unit Series AC30 and 4 individual valves from the SY5000 Series. Including safety enclosure, pneumatic tubing, connection wiring, safety door switch and safety relay. The interface for integration with a CNC production machine or production line is prepared. An on-site inspection is possible.

Tobacco cutting machine from the company Fly Mak, almost new (2023), hardly running. Adjustable to different cutting sizes from 0.02 mm to 20 mm. There is also a knife sharpening machine. Fpsbmkowdatlo Df Tuok Capacity: approx. 200 kg/hour