Type of machinery
(Quantity: > 4)
Manufacturer:
(Category: 1300)
Adjusting nut for die casting machine IDRA1800, TR260x9, 990542, Idra, used Top Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, Adjusting nut, Tr260x9, D430x320mm high. Approx. 240kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the ...
Adjustment nut for die casting machine IDRA OL1800, pullable, TR260x9, 170359, Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, - is in the original packaging, Adjuster nut, pullable, Tr260x9, D390/338x300mm high. Approx. 115kg for die casting machine IDRA OL1800/1750 The goods can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, tie bar expansion nuts and 2 piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D370, D330, D300 6 months warranty We give you a 6-month warranty for these goods f ...
Tie bar expansion nut for die casting machine IDRA1800, TR260x9, 446808, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Tie bar expansion nut, Tr260x9, D465x300mm high. Approx. 300kg for die casting machine IDRA OL1800/1750 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300 6 months warranty We give you 6 months warranty for these goods from the date ...
Adjusting nut for die-casting machine OL1500, pull out, TR250x12, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new. Achtung: Wir bieten verschiedene Säulen, Verstellmuttern, Holmdehnmuttern und 2 teilige Muttern von: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300
Adjusting nut for die-casting machine OL2000, pull out, TR285x10, Oleopress, new -50% Special price As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300
Adjustable nut with drawbar for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, Adjustable nut with drawbar, Tr330x10, D470/410 mm x 325 mm high. Approx. 200 kg, for IDRA 3300 die-casting machine, The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300
Adjusting nut for IDRA2500 die-casting machine, pull out, TR300x10, 41460000210109, Idra, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Adjustable nut, Tr300x10, D470/410 mm x 325 mm high. Approx. 200 kg for IDRA 2500 die-casting machine, The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300
Hydraulic cylinders Hydraulic Hollow Piston Cylinder 100 tons Manufacturer: Power Team Model: RH 1006 Model C Center Hole Cylinder/Ram - Double-Acting / Hydraulic Return 100 ton Capacity 6,000 in Stroke 12,375 in Retracted 18,375 in Extended The unit is NEW and fully functional. see pictures for more details.
This device works according to the sedimentation principle and is able to separate 90% of rock particles >0.2mm at nominal water throughput. Technical data Flow rate: 100m3/h Solids discharge: 4.8dm3/h Tank volume: 2.94m3 Drive power: 0.55kW Total weight: 1473kg On transport pallets: 1 Pal. 222 x 320 x 240 cm, 789 kg 1 Pal. 105 x 670 x 70 cm, 684 kg The sand separator was always part of a test plant in the interior and was hardly used. The seller takes care of the application to the loading area suitable for trucks.
We sell a well-preserved and fully functional spraying machine with a Siemens S5 control system.
LÖDIGE L 10 used machine (as good as new) Year of Make: 2006 Gross volume (liters): 10 Usable volume approx. (litres): 3-7 Drum diameter: 240 Drum length: 220 mixer and housing in stainless steel Spin speed infinitely variable ́ ! Available at short notice
High-Load Analytical Sieving Machine, Used The ANALYSETTE 18 is the robust high-load analytical screening machine from FRITSCH. It effortlessly screens up to 15 kg of material between 20 μm and 125 mm. The three-dimensional screening movement ensures particularly fast screening results without manual post-screening and optimum reproducibility.The ANALYSETTE 18 is used for particle size analysis and fractionation of coarse-grained material. The feed quantity of a maximum of 15 kg for screening material and screen set also allows use in pilot line production or for serial testing of larger quantities. Preferably suitable for particle size analysis and fractionation of coarse-grained material by dry screening
Completely food-safe stainless steel construction for surfaces that come into contact with the product.Blades/hammers → blunt hammer elements on both sides.Cooling → water cooling integrated into the system. Machine as good as new (unused)
A manual 3D coordinate measuring machine from Mitutoyo is offered. Measuring range X/Y/Z: 500mm/700mm/400mm, measuring table: granite, clamping area X/Y: 764mm/1175mm, max. workpiece height: 590mm, max. workpiece weight: 180kg, length measuring system: high-precision glass scales, resolution: 0.0005mm, length measuring system resolution: 0.0001mm, single stylus form deviation PForm,MPE: 6µm, measured single stylus form deviation: 5.15µm, repeatability range R0: 9.70µm, guide system: air bearings on all axes, axis clamping: pneumatic, probe system: Renishaw MH20i. Machine dimensions X/Y/Z: approx. 1122mm/1434mm/2267mm, weight: approx. 646kg. The machine was calibrated by Mitutoyo on 10.03.2026. Documentation is available. An on-site inspection is possible.
A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible.
A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible.
Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment.
: 2000 kgheight: 500 mmwidth: 2000 mm: nein : 2000 x 100 mm: 2,0 x 0,53 x 0,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15000 kgheight: 790 - 1150 mmwidth: 1200 mm: ja : 790 - 1150 mm: 120 x 1200 mm Support trestle, assembly trestle, steel trestle, welding table, assembly table, steel trestle, work trestle - Our support trestles are characterized by their stable construction, highload-bearing stability, and indestructible service life.- Trestle support made of screen printing- Powder-coated in RAL 5010 gentian blue- CE marking- Transport on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000 kgheight: 800 mmwidth: 1200 mm: nein : 1200 x 100 mm: 1,2 x 0,8 x 0,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 2000 kgheight: 500 mmwidth: 1200 mm: nein : 1200 x 100 mm: 1,2 x 0,53 x 0,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 5000 kgheight: 800 mmwidth: 1200 mm: nein : 1200 x 100 mm Support stand, assembly stand, steel stand, welding table, assembly table,steel trestle, work trestle - Our jack stands are characterized by their stable construction, highload-stable stability and indestructible service life.- powder-coated in RAL 5010 gentian blue- Transport on request- CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 15000 kgheight: 790 - 1150 mmwidth: 1200 mm: ja : 790 - 1150 mm: 120 x 1200 mm Support stand, assembly stand, steel stand, welding table, assembly table,steel trestle, work trestle - Our jack stands are characterized by their stable construction, highload-stable stability and indestructible service life.- galvanized- CE marking- Transport on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
