machines and plants for process engineering used for sale (7,690)

Stock number: PM1576, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Dimensions: L 1050 x W 250 x H 330 mm., Motor: 2,2 kW - 220/380 Volt - 1400 rpm., Theoretical capacity: 7000 l/h, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 40 mm., Dimensions outlet: Ø 40 mm., Manufacturer: Mono, Type: SH40A8

Manufacturer:Lisec Model: VB-45 Type of Machine : Spacer Frame Bending Machine Year of manufacture: 2002 Weight: 2,540 kg Power supply: 3/N/PE – 50 Hz – 400 V Connected load: 14.10 kVA Max. pressure: 8.00 bar Certification: CE Find more here - / Contact us at -

Manufacturer:Lisec Model: VB-33 Year of Manufacture: 2011 Type of Machine : Cutting Machine for Laminated Glass Weight: 2,200 kg Connected load: 17.00 kVA Power supply: 3/N/PE – 50 Hz – 400 V AC/DC supply: 400 V / 24 V Max. pressure: 6.00 bar Max. load: 43 kg/m² Certification: CE Find more here - / Contact us at -

Manufacturer: Lisec Type: A1RL Year of manufacture: 1994 Weight: 520 kg Power supply: 380V – 3/N – 50Hz Connected load: 1.1 kW Max. pressure: 6 bar Max. load: 150 kg/m² Find more here - / Contact us at -

Manufacturer: Lisec Type: PKL-60/30 Machine description: Glass sheet loading station Year of manufacture: 2005 Weight: 9,850 kg Power supply: 3/N/PE – 50Hz – 400V Full load current: 27.00 A Connected load: 18.70 kVA Amp: 13.5 A AC/DC supply: 400V / 24V Find more here - / Contact us at -

This is an opportunity to acquire a complete, ready-to-restart feldspar processing plant and open-pit quarry.The facility has been in operation since 1909 . The operation was closed in early 2023 for strategic and market reasons — not due to any fault in the asset itself. The site includes a fully equipped processing factory, an open-pit quarry with an active environmental and quarrying permit valid until 31 December 2052 all buildings, and approximately 26 hectares of land. The quarry permit is transferable to a new owner. Key Points : - High-value feldspar deposit: Mix of potassium and sodium feldspar (50/50). Low iron content of 0.20% in grinding plant output and 0.14% at the open-pit face. - Strong proven yield: 17,000 tonnes per blast. Approximately 2.6 tonnes of feldspar per cubic metre of solid rock. - Crusher output: 0.4 mm particle size. Capacity of 40 tonnes per hour. - Gri ...

A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.

A continuous twin-shaft paddle mixer WAM is available. Throughput capacity range: 5m³-12m³/h, max. liquid addition: 20%, material: 1.4404, process: mixing/conditioning/granulation/neutralization, weight: approx. 700kg. Documentation available. An on-site inspection is possible.

Used milk centrifuge made by Alfa Laval, type: 3191 with upper and lower fittings. New: 1975

Used milk centrifuge made by Alfa Laval, type: 3191. New: 1973

O.M.S. SALERI, X-188, Item 10, Class 150#, Body CD3MN

Stock number: F1132, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Labelling machine, Standing: On legs, Dimensions: L 2050 x W 700 x H 1600 mm., Label size: Max H 120 mm., Label placement: Top, Conveyor: Belt, Conveyor dimensions: L 2000 x W 40 mm., Manufacturer: EME, Model: 1120, Type: 1000, Other: 2 pcs. side belt - Hot print

Stock number: F1127, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Standing: On legs, Construction: Erecting of bottles etc., Dimensions: L 2350 x W 1100 x H 1550 mm., Conveyor: Plastic lamella, Conveyor dimensions: L 1300 x W 82 mm., Manufacturer: M. S. Packaging, Type: FLR 1000, Year: 1999

General SKU221Y083 MakeNetzsch SerialD4095257/6300005469/0100 Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump MaterialStainless steel Eccentric Screw Pumps Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Magento base g_extra_specificationsNetsch Nemo pump 9-312 l/min , 0,23 kW Information Year of construction2021 LocationBarneveldEccentric Screw PumpsNetzschPumps > Eccentric Screw PumpsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU221Y085 MakeRieger Serial20200536-10 Type3850 l. Main Features MaterialStainless steel Volume3850 Ltr. Pressure1 Bar Specified Features - Vertical tank MaterialStainless steel 1.4404 (316L) Closed vertical tankcheck Capacity3500 l. (3850 l.) Vessel sizesø 1800 x 2000 mm Conical bottomcheck Manholeø 420 mm Top connectionsDN40 OutletDN50 Max. temperature50 °C Information Year of construction2021 Mounted on legscheck LocationBarneveld Floorspace1,80x1,80 m Total height3,00 mVertical tanksRiegerTanks > Vertical tanksBrand > Rieger What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU431X1350 LocationBarneveld CEcheck MakeGeppert Band Conveying Systems Main Features Motor0.25 KW Length3800 mm Width140 mm Specified Features - Conveyor belt MaterialPlastic, Stainless steel Conveyor beltcheck Elevator beltcheck Belt width140 mm Belt length3800 mm With carrierscheck Carrier height100 mm With motor0,25 kW, 219-241/380-420 volt, (Ex) Belt speed137 rpm Outlet height1300 mm Information TypeGES-50-K-W Mach.No.1509113 Year of construction2015 Mounted on framecheck Inclined on framecheck Floorspace3,20 x 0,80 m Total height2,20 mConveyor beltsGeppert-Band GmbHConveying systems > Conveyor beltsBrand > Geppert-Band GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Various dosing containers, different sizes.

Used disc centrifuge made by Westfalia, type: SA 80. New: 1998. Capacity: 15.000 l/h.

UHT Pilot Plant APV Tube Heater Capacity: approx. 100 Ltr./h - Tube heater - 2 process tanks with a capacity of approx. 70 litres each - High-pressure homogenizer APV LAB 100 - PWA Cooler

Suction capacity: 6m³, suction pressure: 20 mbar, mix outlet dimensions: 750x800mm. Includes documentation. On-site inspection is available.

An HD piston compressor Bauer is available. Capacity: 800l/min, max. operating overpressure: 160bar, max. operating pressure: 2320psig, power: 18.5kW, speed: 1180rpm. Machine dimensions X/Y/Z: approx. 2200mm/1100mm/1450mm, weight: approx. 750kg. An on-site inspection is possible.

Double Z Kneader / Sigma Kneader / Shovel Kneader / Trough Kneader Linden Suitable for highly viscous, tough, plastic or sticky materials such as adhesives, sealants or pastes. Thanks to their two interlocking Z-shaped kneading arms, they can process substances that are hardly homogenizable with normal mixers. - Make HermannLinden, built in 1965 - Machine type K II 60, factory no. 605 - Refurbished in 2025, electrical equipment completely new - Frequency-controlled electric motor 4.0 KW - Frequency converter Optidrive E3 IP66 Outdoor with main switch, potentiometer and reversal of the direction of rotation - Control box with main switch, emergency stop and undervoltage tripping - Speed from approx. 15 to 60 rpm. - Belt drive - 2 Z-waves - All parts in contact with the product in copper and stainless steel - Single-walled copper container approx. 600 x 600 x 450 mm = appr ...

Two Ivat filter towers for dust and smoke with temperature control and nanofilter are available. Air volume flow: 22000-25000m³/h, motor power: 18.5kW, max. separation efficiency: 99.95%, filter area: 120m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 2000mm/1500mm/3000mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

Manufacturer: Demag Model: Ergotech 110/470-310 concept Year of Manufacture: 2005 Type of Machine : Injection Molding Machine Find more here - / Contact us at -

Machine name: Chamber filter press used Manufacturer: Netzsch Type: 1000 /110 Year of Make: 1996 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 2509 liters Procedure: Closed Filter area: Approx. 163 m2 Plate format: 1000 x 1000 mm Number of plates: 100 Panel Material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9,347 x W 2,245 x H 2,435 mm Curb weight: 11,800 kg Tech. Documentation: Yes Note: It will be available from January 2025 Accessories: A control cabinet, a control cabinet, a hydraulic system, a light barrier, a filter cloth washer and drip plates Condition: Used Price: On request

Machine Name: Decanter Centrifuge Manufacturer: Alfa Laval NX 4045 Type: 919B-31G Year of Make: 1993 Max. Drum Speed: 3250 1/rpm Material: Stainless Steel Drive motor: 18.5 / 21 kW Inner diameter drum: 353 / 198 Inner drum length: 1200 mm Permissible. Sediment density: 1.2 kg/dm3 Dimensions: Length 3000 x Width 1000 x Height 1150 mm Curb weight: 2500 kg Tech. Documentation: Yes Remark: Eddy current brake Accessories: A control cabinet Condition: Used Price: On request

General SKU322X552 LocationBarneveld MakePfaudler TypeBE 1600 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume1600 Ltr. Motor5.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity1600 l. (2309 l.) Vessel sizesø 1500 x 1400 mm Dished bottomcheck Dished top sidecheck Manholeø 500 mm Top connections(2x) ø 100mm, ø 150mm, ø 80mm, ø 50mm, ø 200mm, ø 40mm Outletø 100 mm With jacketcheck volume 353 l. Max. temperature—10 / 200 °C With propellor stirrercheck Motor5,5 kW, 380—415/660—720 V (Ex) Glass Reactors MaterialGlass - Enamel (WWG-9115) Information No.127912 Year of construction2001 Floorspace1,80x1,80 m Total height4,0 m Weight3000 kgGlass-lined ReactorsPfaudler-werkeReactors > Glass-lined ReactorsBrand > Pfaudler-werke What you ca ...

General SKU297W567 MakeDe Dietrich LocationBarneveld TypeCE 8000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume8000 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Capacity8000 l (9380 l) Vessel sizesDia. 2200x2700 mm Dished bottomcheck ManholeDN600 Top connectionscheck OutletDN150 With jacketcheck With propellor stirrercheck Without motorcheck Glass Reactors MaterialGlass - Enamel (3009) Information No.59877 Year of construction1993 Floorspace2,40 x 2,40 m Total height4,10 m Weight9100 kgGlass-lined ReactorsDe DietrichReactors > Glass-lined ReactorsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

Size supply air: Top 21, supply air volume: 1840m³/h, length: 3764mm, width: 712mm, height: 508mm, weight: 333kg. Equipment: pocket filter F7 (short pockets) with differential pressure switch, high air purification efficiency, heater section (long), high-performance heat exchanger for reliable heating, cooling section, prepared for external cooling supply including droplet separator, fan (standard version), energy-efficient and low-noise, empty section with flow distributor, for optimal airflow guidance, silencer type 12, effective noise reduction. Accessories: canvas connection, equipotential bonding, differential pressure switch. System is fully functional, condition very good. An on-site inspection is possible.