filling machines used for sale

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

The machine is in excellent condition. It can reach 9 bags per minute with milk from 3Litres to 25 Litres

Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...

Used Arol M-KAMMA PKV automatic capping machine for overcap caps (caps for pressure caps on bottles with 1881 thread). YEAR OF MANUFACTURE: 2013 NUMBER OF CAPPING HEADS: 24 DIVISION WHEEL DIAMETER: 720 mm CAPACITY: 45,000/h The set includes: octabin tipper, pneumatic transport and capping machine. Documentation in Polish and English.

Pick-up only

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

Glass bottle filler and capper for filling beer as well as CO2-containing and non-CO2-containing soft drinks and capping with crown caps. Capacity: approx. 14 000 bph. Fomat parts for Euro, NRW, Longneck and Vichy bottles., Additional title: 42 filling points, Capacity: 14000 bottles/h, Number of filling valves: 42, Voltage: 220/380 V, Formats: Euro, NRW, Longneck und Vichy type bottles with crown caps, Running direction: left -> right, Operation / Control: Siemens S5

Capper for aluminum screw caps. Capacity: approx. 14,000 bph. Suitable for capping NRW glass bottles with aluminum screw caps., Additional title: aluminum screw caps, Capacity approx.: 20000 bottles/h, Length: 1,9 m, Width: 1,25 m, Height: 2.2 m

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

Manual barrel filling machine for the filling of bunghole barrels with lateral bunghole, horizontal filling of barrels., Width: 0,9 m, Height: 2,9 m, Weight: 200 kg, Formats: bunghole barrels with lateral bunghole, barrels filled horizontally, Material: stainless steel

Precise fill level control for detecting underfilling and overfilling of bottles., P max: 10 bar, Current: 8 A, Voltage: 230 V, Frequency: 50 / 60 Hz, Length: 1,2 m, Width: 0,93 m, Height: 2,2 m, Weight: 350 kg, Features: detection of fill height and closure, inkl. mouth blowing and discharge with collecting table

Nominal capacity of filler: 60000 b/h, Power: 10,7 kW, Water: max. 4 bar, consumption: 1,3 l/min, Compressed air: 6 bar, consumption: 2,5 bar, 30 N/m³/h, Length: approx. 2.995 mm, Width: approx. 2.370 mm, Height: approx. 2.600 mm, Weight: 5200 kg, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, bottle height: min. 150 mm/ max. 350 mm, diameter: 71 mm, Machine partitioning: 94 mm, Operation / Control: Siemens S5, Features: inspections: bottom inspection, mouth inspection, sidewall inspection, caustic detection High frequency, residual fluid detection Infrared, evaluation for detection and separation of bottles with heavy abrasion, height detection

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

PETCYCLE bottling line for water, lemonades and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - New bottle destacker Markant 1ASH-PL Manufacturer: KHS Year of construction: 2001 - pneumatic bottle conveyor Manufacturer: KHS Year of construction: 2001 - Intermix 240 EIÜD premix system Manufacturer: Ortmann & Herbst Year of construction: 1978 with downstream Velcorin dosing system - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year ...

Cap applicator AK 400 for KEG barrels The cap applicator can be used to fit snap-on caps for triangular fittings or key kegs as well as snap-on caps for flat fittings on drums of different diameters. The caps are first removed from the storage bunker into the sorting drum. bunker into the sorting drum. The caps are conveyed in the correct position into the feed rail with electronic quantity monitoring using air pressure. The drum is centred by a parallel gripper to position the cap. The cap is automatically transferred to the fitting head, positioned on the fitting and fitted., Additional title: Cap applicator machine for various fittings, Capacity approx.: 300 Keg/h, Compressed air: 200 l/min., Max. storage bunker content: 800 caps, Power: 1 kW, Current: 2,4 Ampere, Voltage: 380 Volt, Frequency: 50 Hz, Formats: Snap caps for basket or flat fitting possible, Operation / Control: Siemens  ...

Capacity: 360 Bo/h, Filling points: 6 pieces, Voltage: 230 V, Compressed air: min. 6 bar, Length: 1590 mm, Width: 700 mm, Height: 1875 mm, Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L, Base construction: steel rack, Features: including add-on parts, filling programm modifiable

Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Semi-automatic rotary system with four fill/cleaning heads. Suitable for: - processing of 15, 20, 25, 30 and 50 l kegs as well as 20 l containers - beer - lemonades (without fruit pulp) - Coca-Cola drinks - premix and postmix - water - wine, Additional title: Rotokeg, Capacity up to: 50 KEG/h at 50 l KEGs and 25 hl/h beer, Length: 1495 mm, Width: 1495 mm, Height: 2400 mm, Formats: keg types: volume: 15-50 l; diameter: 230-405 mm; height: 320-620 mm, Operation / Control: Siemens Simatic S5

Capacity: 200 Fl/h, Filling places: 4 pieces, Power: 100 W, Voltage: 230 V, Frequency: 50 Hz, Length: approx. 1,3 m, Width: approx. 0,75 m, Height: approx. 2 m, Formats: 5 l Party cans; 2 l siphon bottle, Features: The containers are pressurized before filling, CIP pipes

Additional title: 50,000 bo/h, crown caps, Capacity: 50000 bph, Formats: 0,33 l LongNeck bottles, 0,5 l NRW bottles; crown caps, Running direction: rigth -> left, Operation / Control: Siemens S5, Base construction: filling level filler with return air tube, Features: 120 filling points, 24 sealing points, double pre-evacuation, high-pressure injection

Output: 60 U/h // Volume (Max): 20000 ml

Output: 720 U/h // Volume (Max): 20000 ml

Tetra Pak tetra top fillers are a type of equipment used in the food and beverage industry for packaging products in Tetra Pak cartons. Here’s some more information about them:, - Purpose: Tetra top fillers are designed to efficiently fill cartons with liquid products, such as dairy, juice, and sauces, in a sterile environment, ensuring product safety and shelf life., - Technology: These fillers utilize advanced technology to maintain hygiene and optimize filling speed and efficiency. They often incorporate features such as easy cleaning and maintenance., - Carton Design: The tetra top cartons have a unique shape that provides good stackability and shelf stability. They often come with a separate opening mechanism, allowing for easy pouring., - Sustainability: Tetra Pak emphasizes sustainability in their products, utilizing renewable materials and ensuring that their packaging can be r ...

Tetra Pak tetra top fillers are a type of equipment used in the food and beverage industry for packaging products in Tetra Pak cartons. Here’s some more information about them:, - Purpose: Tetra top fillers are designed to efficiently fill cartons with liquid products, such as dairy, juice, and sauces, in a sterile environment, ensuring product safety and shelf life., - Technology: These fillers utilize advanced technology to maintain hygiene and optimize filling speed and efficiency. They often incorporate features such as easy cleaning and maintenance., - Carton Design: The tetra top cartons have a unique shape that provides good stackability and shelf stability. They often come with a separate opening mechanism, allowing for easy pouring., - Sustainability: Tetra Pak emphasizes sustainability in their products, utilizing renewable materials and ensuring that their packaging can be r ...

Rotary cup/ bucket filling, sealing machine and snap capping machine for pre-formed cups / buckets with handle. 1 or 2 lanes (depending on format, 100 gram 2-lane and 2/5 kg 1-lane). 3 format sets included. Format 1: round plastic cup, ca. ø 104 x H 55 bzw. 65 mm, 100 gram. Format 2: round plastic bucket with handle and collecting basket, ø 175 x H 131 mm. 2 kg. Format 3: round plastic bucket with handle and collecting basket, ø 227 x H 194 mm. 5 kg. Working principle: Preformed cup / bucket destacking, empty station (previous filling station for mozarella balls, by infeed conveyor, now excluded), liquid doser with hopper (for adding salt water, CIP cleanable), pre formed seal mounting station (only for the small cups of 100 gram), hot sealing station (only for the small cups of 100 gram), snap cap adding station, snap cap pushing station and outfeed station. Control panel with PLC an ...

Linear balance for powders and granules. Weighing takes place directly in the container to be infected (buckets, cans, cups. conversion to bags or sacks possible). Weighing range up to at least 10 KG German make. Very good condition. Partly outdated. Tested and functional. With hopper, about 100 liters, made of flexible material and with punchers to avoid bridging in the hopper. For safe separation organic - conventional, a second, different coloured hopper can be made (additional option). Video link shows a similar machine Subject to prior sale.