подкатегории
(уровень третий категории)
Производитель:
(Категория: 401)
Пневматическая транспортная система DAXNER для кофе и опучных материалов — полный — год строительства 2012 На продажу представлена высококачественная и полностью оснащённая пневматическая транспортная система от производителя DAXNER, специально разработанная для мягкой транспортировки кофе и аналогичных опучных материалов. Технические данные: Производитель: DAXNER (Австрия) Год строительства: 2012 Расход: примерно 900 кг/ч Тип транспортировки: пневматический (боковой нагнетатель) Продук ...
Description Item # 9163 - DOYPACK SACHET MACHINE Manufactured by HOELLER doypack with zip closure this is a Hoeller machine from the 1960ies that has been refurbished several times, both by HDG and Laudenberg HDG identification plate shows year 2001, model BMH-ZIP There is NO doser or scale to go with the machine - Bagmaker only The condition is: ran when moved into storage, kept as a back up, but it is worn out and in need of some refurbishment
Description Item # 9296 - TUBE FILLER Manufactured by NORDEN Model 700 aluminium tubes previously used for paint, last in production around July 2025 Year 1997 with Date Embosser with parts for 15ml 40ml, 60ml, 225ml. Circumferences: 19mm, 25mm, 30mm, 45mm 380volt, 50hz
Description Item # 8982 - BLISTER PACKER Manufactured by NOACK Model DPN-760 3 x 380/220volts, 50Hz, 10.5 A, previously being used to blister pack confectionery dragees/chiclets. Including 2 x products feeders Maximum foil width of 165mms. Maximum forming depth of 24mms. up to 50 cycles per minute
Description Item #9008 - POWDER SACHET MACHINE Manufactured by VOLPAK Duplex Sachet Machine Model S-240-D set up to do individual sachet size 70 x 70mms, duplex at 50 strokes per minute, (100 sachets per minute) Suitable for maximum size sachets of approx.150 x 150mms For Preprinted foils, there is a photo electric cell to recognise a mark on the foil It was being used for packing Herbs & Spices, most products were dry salt based” products Foil Transportation through machine id done with Pins Opening of the Bags/sachets by suction cups Including Twin Auger Dosing unit Including MARKEM SmartDate X40 Coding Unit 415Volts, 50Hz, 16.2 Amp
Полная линейка ампул Bosch / Skinetta Использовалась линия Bosch/Skinetta для обработки открытых стеклянных бункеров и ампул для слива. Линия включает машины для стирки, стерилизации и депирогенизации, наполнения, закрывания, маркировки, упаковки и затяжки. Максимальный выходной сигнал — до 18 000 ампул в час, в зависимости от размера ампулы. Включены компоненты формата для ампул объемом 1 мл. Завод был полностью демонтирован в январе 2026 года и распакован у оператора в Китае, недалеко от Гонконга. ...
HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine, The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced Ultra-Clean hygienic technology, ensuring extended product shelf life and uncompromising safety., Key Performance Capabilities, - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity)., - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling., - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ide ...
Used KUSTNER Ax Butter Packaging Machine, Enhance your butter packaging process with the reliable and efficient KUSTNER Ax Butter Packaging Machine. This pre-owned model is designed for optimal performance, making it an excellent choice for dairy processors looking to streamline their butter packaging operations., Features:, - High Efficiency: Designed to package large quantities of butter quickly and accurately, improving your production speed., - User-Friendly Interface:Equipped with an easy-to-navigate control panel, enabling operators to set up and adjust packaging parameters with minimal effort., - Versatile Packaging Options:Capable of accommodating various butter formats and sizes, providing flexibility for your packaging needs., - Durable Construction:Built to last with high-quality materials, ensuring reliability and durability in fast-paced production environments., Benefits:, ...
The Fogg Monoblock Filler is a type of packaging machine designed for filling and capping bottles, typically used in industries like beverages, pharmaceuticals, and cosmetics. Here’s a brief description:, Features:, - Monoblock Design: Combines filling and capping processes in a single machine, enhancing efficiency and reducing the footprint on the production line., - Suitable for 38mm Caps: Specifically designed to accommodate 38mm diameter caps, which are commonly used in various bottle types., - Filling Mechanism: Utilizes a volumetric or gravimetric filling system to ensure accurate liquid filling, essential for maintaining product integrity and compliance with regulatory standards., - Speed and Efficiency: Capable of high-speed filling and capping, improving overall production throughput., - Versatile: Can handle various liquid types, from water to thicker, more viscous products d ...
A total of three counting and distribution machines are available for filling containers (pouches) to the exact number of pieces. 1) MTF Technik MR-S1, year of manufacture: 2017. 2-3) Two identical Lauper LQ 100, year of manufacture: 2007, control: IT 9000. Documentation available. On-site inspection is possible.
Наполнитель Hamba BF2400 Cup, полностью обновлённый, Тарелка из 12 частей, формат на 75 стаканов, состоящая из От: стаканная станция, дозировочный блок с контейнером, продукты: пасты, соусы,... Закрывающая станция, станция герметизации, подъём и Толкание, защитное покрытие, шкаф управлени
Throughput capacity: approx. 8,000cups/h, pre-doser: 20-250ml, main doser: (80) 100-600ml, cereal doser (TBD): 5-60g, spare dosing station, currently available format sets: rectangular ZKB, octagonal ZKB, round ZKB, connected load: 52kW, control: Siemens S7, weight: approx. 25t. An on-site inspection is possible.
A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible.
Piston Type Semi-Automatic Pot Filler with Time Controlled filling. This can fill from 50grams up to 500 grams per piston stroke ., Condition : Very Good, Available Immediately, Filling Type: Piston Volumetric Pump , Filling Heads: Single, Usage: Yoghurt, Ice cream, Pastes, Fruits, etc., Automation: Air Operated
The Miromatic Cup Filler is a Twin Cup Filling machine for 500gr and 1000gr yoghurt at similar products. This applies a sealing film on the cup protecting the product of spillage . The machine is capable of cup dispensing, filling, sealing and over lid application as well dating the product cap.,, Filling Nozzles: Twin Filling , Capacity: 2400 cups per hour on 1 kg , Sealing: Yes, Overlid: Yes, Filing Volumes: 500 grams and 1000 grams , CIP: YES, Available: Immediately
Metal detector on its own conveyor, This Lock MET 30+ by Lock Inspection Systems (England) checks products for metal particles as they pass through the detector head on the belt. The detector sits on its own frame with a modular plastic belt and castors, so it is easy to place in a line. Product settings are selected with the keys on the display; one of the stored programmes is for tomatoes., The serial number and year of manufacture have not been filled in on the rating plate, so they are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/lock-met-30-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Belt: Modular plastic belt, Controls: Display with selection keys, stored product programmes, Construction: Stainless steel, frame on castors
Metal detector with conveyor and reject bin, This Goring Kerr metal detector (later part of Thermo) checks products for metal particles as they pass through the detector head on the belt. Products found to contain metal are rejected from the belt into the stainless steel reject bin., Belt and detector share a frame on castors, with their own control box for start, stop and emergency stop. We have not been able to confirm the model or year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/goring-kerr-metal-detector-with-conveyo r/, Type: Metal detector with conveyor, Reject: Reject bin beside the belt, Belt: Blue plastic belt, Controls: Own control box with start, stop and emergency stop, Construction: Stainless steel, frame on castors
Doses product into trays under a weigher, The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage., The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/jasa-tray-filling-station/, Type: Tray filling station, Filling: Hopper with two flaps, Controls: On/off and two adjustable fill times, Electrical: 230 V, Construction: Stainless frame on castors
Weighs every pack in line and rejects anything out of limits, This Anritsu checkweigher weighs packed products as they run across the belt. If a pack is too light or too heavy it is removed from the line automatically. That keeps you within average-weight rules and keeps giveaway low., The weigher stands on a stainless frame and is operated from the Anritsu keypad panel, which stores several product programs. We did not find a rating plate with the model or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/anritsu-checkweigher/, Type: Checkweigher, Reject: Automatic, out of the line, Controls: Anritsu keypad panel with product programs, Construction: Stainless frame
Weighing and metal inspection in one machine, The Mettler Toledo Garvens XS 3 CC weighs every pack in motion and also checks it for metal, using a Mettler Toledo Safeline metal detector in the line. Packs that are under- or overweight or contain metal are pushed off the belt into the reject bin., The rating plate shows it was built in 2011, serial number 35002725, weighing range up to 1000 g., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/mettler-toledo-garvens-xs-3-cc-checkwei gher-with-metal-detector/, Type: Checkweigher with metal detector, Weighing range: Up to 1000 g, Metal detector: Mettler Toledo Safeline, Profile control, Reject: Pusher with reject bin, Controls: Touchscreen
Liquid filler that fills eight packs at a time, This filler doses liquid, such as brine or sauce, through eight filling heads at once into jars or tubs. The liquid comes from the large hopper on top, and the volume in millilitres is set per programme on the touchscreen. The control currently holds programmes for cucumber and for a second product (Farmer)., The menus are in Dutch and there is a separate cleaning programme. We found no rating plate on the machine, so the make and year of manufacture are unknown. It stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/8-head-volumetric-liquid-filler/, Type: Volumetric liquid filler, Filling heads: 8, Dosing: Adjustable in ml per programme, Controls: Festo touchscreen, Dutch menus, Cleaning: Separate cleaning programme, Constru ...
Loma IQ3 metal detector on conveyor, built in 2022, This Loma IQ3 metal detector is mounted on its own conveyor with a 300 mm wide modular belt and a reject bin. The aperture is 350 × 100 mm (w × h), the belt is 2,300 mm long. The detector is operated via the touchscreen on the detector head., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2022-loma-iq3-metal-detector/, Type: Metal detector with conveyor, Aperture: 350 × 100 mm (w × h), Belt width: 300 mm, Belt length: 2,300 mm, Dimensions: Approx. 2,300 × 900 × 1,450 mm (l × w × h)
Minebea Intec metal detector on conveyor, built in 2021, This Minebea Intec metal detector is mounted on a mobile conveyor with a 350 mm wide modular belt, a reject unit and a roller section at the outfeed. The aperture is 400 × 165 mm (w × h), the belt is 2,100 mm long. The conveyor has a transparent guard over the belt., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2021-minebea-intec-metal-detector-conve yor/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,100 mm, Dimensions: Approx. 2,400 × 1,200 × 1,200 mm (l × w × h)
Checkweigher with colour touchscreen and statistics, The Marel MCheck2 weighs every pack on the belt and removes underweight or overweight packs from the line automatically. The screen shows the average weight, standard deviation, number of rejects and throughput for each product., The weigher has a European type approval and its metrology marking dates it to 2017. It runs on 100–240 V and is built in stainless steel with guarded belts., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/marel-mcheck2-checkweigher/, Type: Checkweigher, Controls: Colour touchscreen with product programs and statistics, Reject: Automatic, with reject bin, Electrical: 100–240 V, 50/60 Hz, Compressed air: Max. 0.6 MPa, Construction: Stainless steel, guarded belts
Sartorius MDP+ metal detector on conveyor, built in 2009, This Sartorius MDP+ metal detector is mounted on a mobile stainless steel conveyor with a 350 mm wide modular belt. The aperture is 400 × 165 mm (w × h), the belt is 2,060 mm long. The detector is operated from the keypad panel on the detector head; the conveyor has its own control box., Located in Emmeloord, the Netherlands. Available on request, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2009-sartorius-mdp-metal-detector/, Type: Metal detector with conveyor, Aperture: 400 × 165 mm (w × h), Belt width: 350 mm, Belt length: 2,060 mm
Checkweigher for boxes and crates, This checkweigher weighs boxes, crates or larger packs on a weigh platform with rollers. The product rolls across the scale, the weight shows straight away on the touchscreen and you can see per product whether it is within limits. The machine is compact, made of stainless steel and stands on adjustable feet., The screen holds product data and statistics per item. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/checkweigher-with-roller-conveyor/, Type: Checkweigher with roller conveyor, Weigh platform: Roller conveyor, Controls: Touchscreen with product data and statistics, Construction: Stainless steel, on adjustable feet
Platform scale up to 30 kg, reading in 10 g steps, This stainless steel platform scale weighs from 0.2 to 30 kg with a division of 0.01 kg. The weighing platform sits freely on the table, while the indicator is mounted on a stainless column at eye level. Useful for weighing portions, crates or ingredients., The indicator is an IT1000 with keys for tare, zero, totalising and printing. We did not find a rating plate with the make or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/stainless-steel-30-kg-scale-with-it1000 -indicator/, Type: Platform scale, Weighing range: 0.2 – 30 kg, Division: 0.01 kg, Indicator: IT1000 on stainless column (tare, zero, totalising, print), Construction: Stainless steel
Weighing station for the food industry, The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/topcontrol/, Type: Weighing scale / weighing station, Indicator: Top Control colour touchscreen, Construction: Stainless steel frame with weighing platform and product tray
Compact X-ray inspection system for packaged food, This Ishida IX-EN-2493-S is an X-ray inspection system built in 2015 by the Japanese manufacturer Ishida. It detects high-density foreign bodies in packaged products, such as ferrous and non-ferrous metals, stainless steel, glass, stone and bone. The tunnel is 240 mm wide and 150 mm high, the belt runs at a variable 10 to 60 m/min and handles products up to 5 kg and from 20 to 450 mm long., The machine is built in stainless steel (SUS304), has an IP66-rated inspection chamber and is operated via a 15-inch touchscreen. The line sensor has a resolution of 0.4 mm. Actual detection sensitivity depends on the product, its dimensions, the packaging and where the contaminant sits., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2015-ishida-ix-e ...
A complete can filling and packaging line with can feeding, lid feeding, filling, sealing, capping, labeling and banding is available, 1) feeding system, with two format-adjustable rotary tables for the separate feeding of empty cans and lids, 2) REX EVF 327 vacuum filler, year of manufacture: 2017, 3) Fillpack R01-TI filling and closing machine, format: 75-400ml, year of manufacture: 2022, for filling, positioning and sealing the sealing foil as a tamper-evident seal, placing and screwing on the lid, 4) CDA NINON labeling system, year of manufacture: 2021, for lid, wrap-around and body labeling, 5) Garvens BF 8 S2 automatic checkweigher, year of manufacture: 2002, as an inline checkweigher with automatic rejection of products not conforming to the specified weight, 6) ECOMA can banding machine, max. output depending on format: approx. 35cans/min, year of manufacture: 2022, for control o ...
