universal tool used for sale

Stacker truck, walker, manual pedestrian stacker LOGITRANS type LF 1001 / 1600 Tool lifter series No: 051E04006100 Year of construction 2005 Load capacity: 1000 kg Lifting height: 1600 mm Fork length: 600 mm Platform size: 800 x 650 mm Total length: 1200 mm Total width: 800 mm Construction height: 1930 mm- Lifting by pumping movement with the traction dike- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height. - Driving by pushing hand fork stroke in single mast with free lift net weight 198 kg very good condition; used

CNC Univ. Tool grinding machine SCHÜTTE type BU 400 CNC 4 Fabr. SKU: 03-02 Year of construction 1990 4-axis (X, Y, Z and R)Table clamping surface 1300 x 250 mm Center width 700 mm Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm. Grinding spindle drive 3 kW Mains connection 380 Volt, 50 Hz, 25 Amp. - CNC control dismantled - Coolant device adjacent Space need L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control missing. good condition, ideal for control conversion; used

Univ. Tool milling machine, milling machine MAHO type MH 400 P Masch. No. 41364 Year of construction 1981 Control Heidenhain TNC 125 (Active Digital) Travel paths with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel paths with hand wheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle holder ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm infinitely variable feed X and Z-axis 5 - 1000 mm /min. infinitely variable Feed Y-axis 5 - 670 mm/min. infinitely variable rapid traverse X + Z = 1.2 m/min., Z = 0.8 m/min. Pinol shift Vertical 50 mm Spindle drive 2.2 kW Mains connection 380 Volt, 50 Hz - conventional handwheels for X, Y, Z - el. Control cabinet fixed to the machine- Coolant device in the machine foot - Operating instructions Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg good condition; used

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 51265/08 Year of construction approx. 1967 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 2100 mm Spindle holder SK 40 - S20 x 2 Spindle speed 40-2000 rpm 16 steps Motor power 1.0 and 1.6 kW pole switchable Mains connection 380 volts, 50 Hz feed in the X and Z axes - Spindle speed over 2 motor speeds and 8 gear stages - Pinole shift on the vertical milling head 60 mm - Fixed angle table - adjacent control cabinet Space requirement L x W x H 1100 x 1100 x 1600 mm Weight 650 kg good condition; used

Tool steel, round material, shaft section shaft, steel block, shaft sawn Material section 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material abbreviation: 90MnCrV8 Cold work tool steel with high hardness acceptance and good dimensional stability during hardening Application in toolmaking for cutting, punching and embossing tools. Rollers and profile rolls, measuring tools, guide strips, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength as delivered: 770 N/mm2 Hardness: 790?820 C Tempering: 220?260 C Working hardness: 58-62 HRC Soft annealing: 680-720C - Medium alloy cold work steel - Oil hardener 4 pieces available, price per piece; used

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 34338 Year of construction approx. 1965 Travel routes X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps Spindle speed horizontal 60-1200 rpm. 12 stages Motor power 1.0 and 1.5 kW pole switchable Mains connection 380 volts, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinole shift on the vertical milling head 60 mm- swivel, rotate and tiltable angle table - adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition; used

Module rack trolley rollable with SK50 holders and mounting accessories Width approx. 110cm SK50 cutter head diameter 200mm SK50 cutter head diameter 125mm SK50 reduction to MK2 SK50 reduction to SK40 SK50 corrugated spider holder 8mm SK50 cutter mandrel 32mm SK50 corrugated spider holder 25mm SK50 cutter mandrel 32mm with disc cutter 125x10mm SK50 Reduction MK4 SK50 roughing cutter 50mm SK50 reduction SK40 with boring head 60-100mm SK50 Reduction MK2 SK50 holder with roller end cutter 84x100 with internal cooling SK50 reduction MK2 with chuck 0-10mm SK50 reduction SK40 with cutter head 65mm SK50 corrugated mandrel holder 12mm SK50 Reduction MK4 SK50 holder with cutter head diameter 200mm SK50 corrugated mandrel holder 20mm SK50 corrugated spider holder 16mm SK50 holder with cutter head 125mm SK50 roller milling cutter 80mm SK50 holder with corner knife head 80mm  ...

Tol measurements: 800 range L-W-H: 900 x 800 x 800 mm Tool change car with 4 roles to take over for example Punching tools, height of rolls above ground 565 mm, with 1 plate 605 mm, with the second plate 645 mm, 4 castors with parking brake, 2 stoppers for Fixing the transport parts. Tool dimensions max. 800 x 800 mm. Machine dealer with own stock of 2500 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens Sinumerik 810 D Travel x/y/z 350 mm / 240 mm / 340 mm Drive power // Tool holder 6.3 kW / 10 kW // ISO 40 Spindle speed range of the working spindle 20 – 6,300 rpm Connected load / weight of the machine 15 kW / 2 t Manually operated rotary table C-axis 360°/swivel range B-axis +105/-15° table load / table clamping surface 100 kg / 400 mm x 290 mm Accessories: various holders and tools according to photo Remarks: Error at startup, possibly control defective, not operational

range L-W-H: 780x480x105 mm weight: 79,5 kg : 7 St. Tool trolley filled with: 3 pcs. Different socket sets, double end wrench, Double ended ring spanners, wrenches, pliers different, Screwdrivers, Allen screwdrivers, files, hammersSaw, etc. Tool Steel: Chrome Vanadium 5 pcs. Drawers filled with tools 2 pcs. Drawers empty The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width: 800 mm depth: 380 mm height: 1800 mm weight: 70 Kg Tool cabinet from sheet steel split in the middle. Width of 100 cm. with 2 sliding doors and adjustable shelves 8 Brand new item with minor defects. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand - Bending bench Manufacturer: GEKA

Univ. Tool milling machine DECKEL Type FP 1 Masch. No. 28317 Year of construction approx. 1960 Travel X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Spindle holder horizontal MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm 12 steps spindle speed horizontal 60-1200 rpm. 12 steps Motor power 0.8 and 1.1 kW pole switchable Mains connection 380 volts, 50 Hz - spindle speed over 2 motor speeds and 6 gear stages - feed in the X- and Z-axis coolant device with mechanical pump in the machine foot - Pinol shift on the vertical milling head 60 mm- Vertical milling head +/- 90 pivotable - Metal substructure made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg good condition; used

Driven tool holder for heavy cutting with 80 bar internal cooling and switchable between internal cooling / external cooling / or both together can be ordered by many manufacturers

Manufacturer : RGX-Tools Type: RGX2-65/101-32/2(DO) Condition : new Warranty : 12 months 14 pieces in stock for immediate delivery Description: BMT 65 radial tool holder, with internal cooling for DOOSAN; Hyundai Wia... Axial version ( straight holder ) Manufacturer: RGX- Tools Item number: RGX2-65/101-32/2(DO) Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Compatible with the following machines Chevalier ᐳ FBL-300 DOOSAN ᐳ PUMA 2100/2600M/LM/MS/LMS DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY DOOSAN ᐳ PUMA MX 2000/2500 DOOSAN ᐳ PUMA MX 2600 T/ST DOOSAN ᐳ PUMA TT 2000/2500 M/S/Y Focus CNC ᐳ FBL 300MC HAAS ᐳ DS-30Y HAAS ᐳ ST-20/25/30/35 Y HAAS ᐳ ST-20/25/30/35 Y Hyundai ᐳ SKT 200/250 TTSY Johnford ᐳ SL35/65 BMT65 Leadwell ᐳ LTC 25iM (BMT65) SMEC ᐳ PL 20/25/35 SMEC ᐳ SL 2000/ ...

Heidenhain TNC 124 Universal table 630x400 mm Spindle speed 63-3150 1/min, SK 40 Travel X/Y/Z 600/400/400mm Vertical milling head with manual quill Counter bearing arm with counter bearing Partial enclosure hinged Need for repair in Y-axis

Inv. Num. : 6445 Type: BF 74 Producer: CDM ROVELLA Generated: 2008 Parameters: Workpiece length: 800 mm Workpiece width: 550 mm travel length of the X-axis: 700 mm Travel length of the Y-axis: 400 mm Travel length of the Z-axis: 350 mm Maximum table load: 2000 kg Maximum electrode weight: 90 kg Tank dimensions: 1200 x 750 x 505 mm Weight: 4400 kg

Item tool holders for milling machine with SK40 (inner suit M16) DIN 2080 SK40-ER16 Long milling mandrels for Horzon valley milling in different diameters, partly with bearings Short milling mandrels for holding cutter heads Recordings with Morse cone in different sizes Everything according to photos

Current new entry : 5267 + 5268 2 x DECKEL FP 2 A / 2819 Contour 3 Rigid table + chip tray

Sharpening machine for profiled cutters Tool diameter max 290 mm Width of tool max 230 mm Control manually Number of cutters max 931 Disc diameter max 225 mm Back clearance angle 30 ° Side clearance angle up to 20 ° Accuracy per 1000 5 mm Main motor power 1,1 kW Stepless rotational speed control Total connection 1,5 kW Weight 780 kg Space required: Length 1.650 mm Width 1.100 mm Height 1.080 mm

Specifications: - Grinding wheel diameter approx. 175 mm - Disc speeds 2820 rpm - Support table left height adjustable + laterally movable + rotatable -Lighting - Drive 400 V / 0.75 kW - Space requirement approx. W 1050 x H 1350 x D 650 mm - Weight approx. 120 kg

Inv. Num. : 6319 Type: AGIETRON HYPERSPARK Producer: AGIE Created: 2006 Parameters: Control system: AGIEVISION Operating hours: 69006 h Switch-on hours: 31080 h Table dimensions: 600 x 450 mm Travel length of the X-axis: 350 mm Travel length of the Y-axis: 250 mm Travel length of the Z-axis: 350 mm Maximum table load: 400 kg Container size: 860 x 620 mm Equipment: Clamping solenoid 3x electrode holder Cooler Dielectric 8x dielectric filter Erowa clamping head

1993 Amada Promecam ITS2 - 100/30

AGIE CHARMILLES wire cut AC2 VERTEX year `2010

Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm

: 000 Dimensions (HxWxD): 800x800x1200 mm weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sharpening machine for band saw blades Manafacture: Alber Sharpening machine for band saw blades Sharpening circuit Fabr. Alber Model: TB1 - AE2 Year of construction: 1978

Injection mould for round plastic bucket 5.5 litres Mould information: Weight: 449kg Dimensions of the mould (mm): Φ=420, Φ1=500, H1=415 Number of cavities: 1 Centering ring (mm): Φ 160 Availability: Immediate Current condition: out of production, can not be seen while working Bucket information: Volume: 5.5 L Brimfull Volume: 5.9 L Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 231 / Ø 235 / Ø 195 Height (mm): 190 Weight bucket (g): 220 ±5 Delivery time: To be agreed Guarantee: Without guarantee Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number to the lid of bucket (161549342) Number of the handle of bucket (161595367) Contact number: 0038651213228

Injection mould for round plastic bucket 5,5 L information: Weight of the mould: 505 kg Dimensions of the mould (mm): Φ=440, Φ1=500, H1=420 Centering ring (mm) (Φ): 160 Number of cavities: 1 Current condition: can not be seen while working Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Information about product: Volume (litres): 5.5 brim-full Volume (litres): 6 Dimensions – diameter top/bottom (mm): Ø 236 / Ø 205 Height (mm): 173 Weight (g): 200 ± 5 Bucket inserts: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER Number of the handle of bucket (search: 161595367) Contact number: 0038651213228

Injection mould for round plastic bucket 6.5 litres information: Weight of the mould: 480kg Guarantee: Without guarantee Dimensions of the mould (mm) (Φ, Φ1, H1): Φ=420, Φ1=500, H1=480 Current condition: Not running, can not be seen while working Availability: Immediate Delivery time : to be agreed Centering ring (mm) (Φ): 125 Product: Round plastic bucket 6.5 litres Number of cavities: 1 Information about product: Bucket catalogue number: 1VM6501 Volume (litres): 6.5 Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 230 / Ø235 / Ø 195 height (mm): 225 weight (g): 247 ±5 Lid catalogue number: 1PV0506 Weight (g): 79±2 BUCKET INSERTS: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER LID INSERTS: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the lid of buck ...

Univ. NC tool milling machine KUNZMANN type WF 3/4 machine no. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Spindle mount SK 40 Spindle speed 40 - 2500 rpm. Feeds X, Y and Z- axis 0 - 1000 mm/min. infinitely variable rapid traverse X, Y- axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical quill adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 volts, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed over 2 gear stages and infinitely variable via frequency converter - Vertical milling head +/- 90 swivelling - hydr. Tool clamping - fixed angle table - control cabinet fixed to the machine - coolant tank with pump opposite - central lubrication - lighting space requirement L x W x H 1800 x 1800 x 1900 mm weight 1300 kg good condition; used

Specifications Grinding diameter max.: 100 mm Longitudinal movement of the table: 55 mm Grinding head vertical adjustment: 160 mm Swivel range of the grinding head: Horizontal: 360° Speed of the grinding spindle: Number (levels): 2 from: 2800 rpm up to: 5100 rpm Connection 50 Hz 3x: 380 volts Grinding spindle motor: 0.50 hp Machine weight approx.: 400 kg Dimensions machine: Length: 1000 mm Width: 950 mm Height: 1550 mm

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 7 St. Tool trolley with 8 drawers, 6 of which contain tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and detectable. - The tool included is made of chrome vanadium steel. + Drawer 1: - 1/4 inches: 13 nuts from 4mm to 14mm, 11 long nuts 4mm - 13mm Ratchet, universal joint, extension. - 3/8 inches: 10 nuts from 10mm to 19mm, 11 long nuts from 8mm to 19mm Ratchet, universal joint, extension. - 1/2 inches: 17 nuts from 10mm to 30mm, 9 long nuts from 10mm to 24mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4 inch ratchet: Torx nuts without bore T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with bore TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Imbus nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH ...

Folding bench TEKO Sheet thickness 1.9 mm Usable length 2025 mm Length 2500 mm Width 650 mm Height 1080 mm Weight 500 kg

Injection mould for lid of 5,5 L and 6,5 L plastic round bucket: Weight of the mould: 191 kg Dimensions of the mould (mm): Φ=400, H=270 Number of cavities: 1 Centering ring (mm) (Φ): 125 Lid weight (g): 85 ±2 Current condition: ready to work Availability: immediate Guarantee: without guarantee Delivery time: to be agreed Lid inserts: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the bucket 5,5 L (search: 161523670) Number to the bucket 6,5 L (search: 161530621) Number of the handle of buckets (search: 161595367) Contact number: 0038651213228

Machine type: Tool milling machine Manufacturer: DECKEL Model: FP 1 Active 3-Axis Year of construction: 1984 Condition: very good Type of offer: used machine Specifications: Table: 600 x 210 mm Speed range: 40 - 2000 rpm. Spindle mount: SK 40 Travel range: x = 300 mm y = 160 mm z = 340 mm Propulsion: 1.6 / 2.0 kW Remark: Heidenhain TNC 113, 3-axis active digital display, Safety cabin with electrical shut-off, coolant device, Machine vice with turntable 110 mm jaw width, Collet chuck SK 40 with 13 collets 5 - 25 mm, 5 tool holders SK 40, infinitely variable feed control and rapid traverse in x, y, z Weight: 850 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated with us. We would be pleased if you are interested in our offer. Subject to errors, changes and prior sale.

Machine for the production and grinding of diamond tools.

Bending bench Geka Max width 2.03 m Thickness 1 mm Scale 180° Bending beam spring-assisted Length 2.40 m Width 0.80 m Height 1.10 m Weight 500 kg

chamfer lenght: 6000 mm Upper tool straight: 25 pieces, total length: 6000 mm. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 2800 mm Various tooling: 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm. 2 pieces: 1500mm and 1300mm. Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 1370 mm Various tooling: 65 x 40 mm with 4 openings: 8, 10, 10, 35 mm. 6 pieces: 1370 mm Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Information about mould: Weight of the mould: 280kg Dimensions of the mould (mm): A = 445, B = 295, C = 225 Centering ring (mm) (Φ): 99 Number of cavities: 2 Current condition: operational, can be seen while working Availability: immediate Delivery time: to be agreed Guarantee: without guarantee Information about product: Dimensions (A, B, s) (mm): 254, 145, 9 Weight (g): 20g ± 1 g Contact number: 0038651213228

chamfer lenght: 3050 - 4020 mm 4 pieces upper tools: tool No 1 Length: 3700 mm, dimensions see sketch, price = 940,- tool No 2 length: 4020 mm, dimensions see sketch, price = 880,- tool No 3 length: 3055 mm, dimensions see sketch, price = 750,- tool No 4 length: 3050 mm, dimensions see sketch, price = 750,- Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 2800 mm Various tooling: 70 x 70 mm with 4-fold opening: 10, 10, 20, 30 mm. 2 pieces: 1500mm and 1300mm. Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 4130 mm Dimensions: 65 x 40 mm with 4-fold opening: 10, 30, 10, 10 mm. Total length 4130 mm. Stamps: 12 pieces, total length: 4300 mm. Prices excl. VAT Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Package HKS63 Tool Mounts composed of 1 piece Holex HSK 63-M8x101 for screw-in milling cutter 1 piece Holex HSK 63-M12x101 for screw-in milling cutters 1 piece Holex HSK 63-M12-126 for screw-in milling cutters 1 piece HSK 63-M12-132 for screw-in milling cutter 2 pieces Garant HSK-A63-4-80 shrink chuck 1 piece Garant HSK-A63-8-50 for screw-in milling cutter 5 Garant HSK 63 M8-101 for screw-in milling cutters 1 piece Hoffmann HSK-A63-8-65 for Weldon 1 piece Hoffmann HSK-A63-16-80 for Weldon 1 piece Goblet HSK 63x6x65 for Weldon 1 piece Goblet HSK 63x10x65 for Weldon 1 piece Goblet HSK 63x12x80 for Weldon 4 pieces WNT 84 754 622 transverse groove cutter mandrel

PONAR KOWARY NUA 25 tool grinding machine was built by the Polish company PONAR KOWARY (LAKFAM) in 1984. A machine characterised by a robust construction of high stability, is used in tool shops and workshops for precision grinding of tools and tooling. Grinding of workpieces is performed on a table with a surface area (L x W) of 915 x 135 mm with two handwheels for manual longitudinal movement (X axis) and transverse movement (Z axis) of the work table. The reliable grinding wheel spindle moving at 3850 and 5635 rpm guarantees rapid and precise machining. The total weight of the machine is 910 kg. The machine is offered with the extensive range of equipment shown in the attached photos, which includes: – driven divider to the instrument along the screw line – angle vice 2 pcs. – moving tailstock: 2 pcs. – 3-jaw chuck fi 160 + spanner – workpiece centre positioning tool ...

Sell a tool carrier trolley with the tool carrier system Kelch TUL System. Condition: Used Composed of 1 pcs car Tulmobil System 2 Model S2; 16 pcs TUL System Goblet for SK40 46 pcs SK 40 tool holders, including 5 jaw chucks, 1 measuring chuck, 21 collet holders with collets OZ462E; 3 collet chuck OZ, 2 collet chuck OZ approx. 90mm long, Mandrels for saw blades, roller end mills, cutter heads, etc Chip pliers MK1

Travel: X, Y, Z 595mm x 400 mm x 450 mm Speed range from 30 - 1,800 rpm for horizontal and vertical Milling head to turn to the right and left with quill 75 mm Tool holder SK 40 Machine number 80003 Accessories: 3-axis digital display Heidenhain

Pear 1FC4 Tool Milling Machine Manafacture: PEAR Model No.: 1FC4 X-axis (longitudinal): 200 mm Y-axis (transverse): 300 mm Z-axis (vertical): 155 mm Ratio: 1:1 Table dimensions (mm x mm): 600x400 Length x width x height: 1300 × 1300 × 2300 mm Collet bore mm: 4,6,8,10,12 Spindle speed: up to 12,000 rpm Distance between table and mandrel: 530 mm Engine hp: 0.75 RPM: 700-4400 Weight: approx. 1800 kg More items - new and used - can be found in our shop! International shipping costs on request!