british flag
Resale Logo

universal tool used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information Schleif- und Werkzeugmaschinen  Bernd Gail GmbH  http://www.gail-werkzeugmaschinen.de 
banner logo
start page > keywords universal tool > results
835 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125452415 101

DMG DECKEL MAHO DMU 50 EVO for sale
Numerically Controlled Machining Centres


Machining center - universal DMG DECKEL-MAHO DMU 50 EVO / 5-axis bearing no 1105-00930 category machining center - universal make DMG DECKEL-MAHO type DMU 50 EVO / 5 axes built in 2001 State second-hand machine control C ...
used machine
 
Machining center - universal DMG DECKEL-MAHO DMU 50 EVO / 5-axis bearing no 1105-00930 category machining center - universal make DMG DECKEL-MAHO type DMU 50 EVO / 5 axes built in 2001 State second-hand machine control CNC HEIDENHAIN TNC 430 Vidia RT France country of origin Germany delivery immediately cargo base EX WORK technical details x way 500 mm y way 420 mm z-way 380 mm control HEIDENHAIN TNC 430 spindle taper SK 40 speed 18,000 rpm spindle motor 15 kW rapid 50 m / min table on clamping area 500 diameter. x 380 mm feed range up to 20 000 mm / min tool changer 32 x total power consumption 38 kVA machine weight approx. 5.9 t description - CNC - screen control HEIDENHAIN TNC 430 - 5-axis machine with B + C - axis
-Spindle: 19 500 h - a power: 88 000 h - machine documents
2001
59,000 €  
    request
125460807 103

FORMAT UF 250 for sale
Tool Room Milling Machine - Universal


x-travel: 900 mmy-travel: 250 mmz-travel: 450 mmturning speed range - horizontal: 50 - 1700 U/minturning speed range - vertical: 50 - 1700 U/minmilling-head swivable +/-: 90° spindle taper ISO: 40 table surface area:  ...
used machine
 
x-travel: 900 mm
y-travel: 250 mm
z-travel: 450 mm
turning speed range - horizontal: 50 - 1700 U/min
turning speed range - vertical: 50 - 1700 U/min
milling-head swivable +/-: 90°
spindle taper ISO: 40
table surface area: 1250 x 250 mm
total power requirement: 4,2 kW
weight of the machine ca.: 1,5 t
dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m
? hydr. vise
? horizontal milling equipment (without steady) with 3 milling spindles


This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125437000 101

Z 3050 X 16 for sale
Radial Drilling Machines


Radial drilling machine Z 3050 X 16 was built in 1989. It is a universal general purpose machine tool. Suitable for drilling, countersinking, reaming, chamfering and threading of medium and large parts. With proper equip ...
used machine
 
Radial drilling machine Z 3050 X 16 was built in 1989. It is a universal general purpose machine tool. Suitable for drilling, countersinking, reaming, chamfering and threading of medium and large parts. With proper equipment it is also possible to boring.

Technical data for the Z3050 X 16 drill:
- maximum drilling diameter: 50 mm
- maximum working range: 1600 mm
- maximum distance between spindle axis and column: 1600 mm
- the minimum distance between the spindle axis and the column: 350 mm
- horizontal travel of the spindle head on the arm: 1250 mm
- maximum distance from the spindle face to the working surface of the base plate: 1220 mm (1250 mm)
- minimum distance from the spindle face to the working surface of the base plate: 320 mm (350 mm)
- vertical arm displacement on the column: 580 mm
- arm lifting speed: 0.02 m / sec.
- arm rotation angle: 360 degrees
- cone spindle: Morsea Nr. 5
- spindle speed range: 25-2000 rpm.
- spindle speed: 16 items
- spindle feed range: 0.04-3.2 mm / rev.
- number of spindle feeds: 16 items
- spindle extension: 315 mm
- feed depth for rotation of the dial with a scale: 122.5 mm
- maximum allowable torque on the spindle: 490 Nm
- maximum permissible spindle feed pressure: 15680 N
- main engine power: 4 kW
- lifting power of the arm: 1.5 kW
- hydraulic lock motor power: 0.75 kW
- Coolant pump motor power: 0.09 kW
- Overall dimensions (L x W x H): 2500 x 1060 x 2655 mm
- machine weight: approx. 3500 kg (3900 kg with auxiliary column)
1989
7,125 €  
  PL   request
125460809 103

KUNZMANN UF6N for sale
Tool Room Milling Machine - Universal


x-travel: 450 mmy-travel: 500 mmz-travel: 200 mmturning speed range - horizontal: 30 - 1280 U/minturning speed range - vertical: 50 - 2150 U/minmilling-head swivable +/-: 90° spindle taper ISO: 30 table surface area:  ...
used machine
 
x-travel: 450 mm
y-travel: 500 mm
z-travel: 200 mm
turning speed range - horizontal: 30 - 1280 U/min
turning speed range - vertical: 50 - 2150 U/min
milling-head swivable +/-: 90°
spindle taper ISO: 30
table surface area: 865 x 265 mm
total power requirement: 3 kW
weight of the machine ca.: 1,44 t
dimensions of the machine ca.: 1,2 x 1,5 x 1,8 m
? hydr. vise
? horizontal milling equipment (without steady) with 3 milling spindles


This ad was created with MODUL MWS - the software solution of LogoTech.
1979
Price  
    request
125421632 103

LAGUN FU 1600 for sale
Universal Milling Machines


Universal milling machine LAGUN FU 1600 was produced in 1990. Characteristics of the LAGUN FU 1600 milling machine: - table dimensions: 1600 x 340 mm - longitudinal working range: 1150 mm - transverse work range: 3 ...
used machine
 
Universal milling machine LAGUN FU 1600 was produced in 1990.

Characteristics of the LAGUN FU 1600 milling machine:
- table dimensions: 1600 x 340 mm
- longitudinal working range: 1150 mm
- transverse work range: 330 mm
- vertical working range: 465 mm
- speed range: 28/1400 rpm.
- vertical feed: 12/800 mm / min.
- horizontal feed: 6/240 mm / min.
- table inclination: up to 45 degrees
- tool fastening: ISO 50
- feed accelerators
1990
13,750 €  
  PL   request
125460744 103

ERNAULT-SOMUA Z 1 C for sale
Universal Milling Machine


x-travel: 710 mmy-travel: 220 mmz-travel: 400 mmtable surface area: 1200 x 300 mmspindle turning speed range: 40 - 2000 U/minspindle drive: 2,3 kWtool taper: 40 SKtotal power requirement: 5,0 kWweight of the machine ca.: ...
used machine
 
x-travel: 710 mm
y-travel: 220 mm
z-travel: 400 mm
table surface area: 1200 x 300 mm
spindle turning speed range: 40 - 2000 U/min
spindle drive: 2,3 kW
tool taper: 40 SK
total power requirement: 5,0 kW
weight of the machine ca.: 1370 kg.
dimensions of the machine ca.: 1,5 x 1,2 x 1,4 m




This ad was created with MODUL MWS - the software solution of LogoTech.
1988
Price  
    request
125344707 104

MSO FM 130/350 for sale
Universal Cylindrical Grinding Machine


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% ATTENTION – SPECIAL OFFER UNTIL 30.06.2018 WE NEED ROOM FOR WAREHOUSE INSULATION SO OUR PRICES ARE CURRENTLY 35% OFF ! %%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Universal Cylindrical Gr ...
used machine
 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

ATTENTION – SPECIAL OFFER UNTIL 30.06.2018
WE NEED ROOM FOR WAREHOUSE INSULATION
SO OUR PRICES ARE CURRENTLY 35% OFF !

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%


Universal Cylindrical Grinding Machine MSO FM 130/350 with Digital Setup in X

manufacturer: MSO
type: FM 130/350
mach.-Nr.: M 25728
year of construction: ? / 2018 tüp.
comm.-Nr.: 3990855/009
stock-nr.: 1889


+ Special Price: old 10.500,- € | now 6.825,- €
+ All prices are shown without taxes (net price)


The machine can be used for:

external grinding
surface grinding
taper grinding
edge grinding
phase grinding
plunge grinding


Technical Data

centre height: 130 mm
swing-Ø: 260 mm
grinding length: 350 mm

grinding wheel

diameter: 300 mm
bore-Ø: 127 mm
largest width of grinding wheel for plunge grinding: 40 mm
largest total width of a grinding wheel set: 80 mm
largest sum of single widths: 40 mm
grinding wheel speed: 1.650 / 2.150 rpm = 30 m/s

grinding head

largest grinding head hub: 209 mm
largest fine hub by hand wheel: 90 mm
largest rough hub by hand wheel: 165 mm
additional hub: 142 mm
autom. interval feed: 0,005 – 0,020 mm
feed by one revolution of hand wheel: 1,0 / 2,0 mm
feed by one hand wheel graduation mark: 0,005 mm



headstock spindle

6 work-piece speeds, adjustable: 40 – 305 rpm
rotatability of headstock spindle against the grinding wheel: 90°
spindle cone or inner taper of headstock spindle: MK 4

tailstock

inner cone of quill: MK 3
quill travel: 30 mm

table

largest table incline: 10°
largest cone angle: 20°
table speed: 0,2 – 1,0 m/min
rough travel by hand wheel: 1 revolution 25 mm, 1 graduation mark 0,25 mm
fine travel by hand wheel: 1 revolution 2,5 mm, 1 graduation mark 0,025 mm

total connected load: ca. 4 kW
weight: ca. 1.800 kg
standing area: W 1,60 x D 1,30 x H 1,40 m
color: blue / grey-white / red


features

digital display in X, Sino SDS3, almost new
manual or automatic operation
self-feeding up to 0-limit
grinding wheel fine adjustment 0,001 / 0,002
automatic feed works as piercing feed, without feed, table-dependant feed
only RIGHT / LEFT and RIGHT / only LEFT
upper table for tamper grinding adjustable
bedway is lubricated by re-oil
tailstock can be activated by mechanical lever
headstock spindle pivotable up to 90°
grinding head pivotable up to 360°, in 2 layers
grinding head two speeds
free-standing liquid cooling system, mobile
splash guards
2 pieces grinding wheel flanges
adjustable dressing device for grinding wheel, at tailstock with diamond
open lunette, adjustable
three-jaw chuck 125 mm Ø, with inner and outer clamps, with flange and spindle holder (unused)
face plate 160 mm Ø (unused)
collet chuck ER40 with set of collets 32 pieces, Ø 4 – 30 mm (unused)
spindle holder sleeve MK4 / MK3
clamping tube for spindle tools
splash guards
centre punch pricks, in various designs
wet grinding device with magnetic filter
operating manual with electrical circuits


If the year of construction has a tuep.”-date, that means the machine has been electrically and technically inspected by us on that date.
If the year of construction has a tueb.”-date, that means the machine has been partially overhauled on that date according to the prior owner.
If the year of construction is marked ”, it is the information the prior owner relayed to us or our own estimation.
 
6,825 €  
    request
125460762 103

MIKRON VD 500 D for sale
Universal Milling Machine


x-travel: 500 mm längsy-travel: 400 mm querz-travel: 400 mm senkrechttable surface area: 900 x 400 mmspindle taper ISO: 40 SKturning speeds: 30 - 3.500 U/mintotal power requirement: 10,0 KWweight of the machine ca.: 4.0 ...
used machine
 
x-travel: 500 mm längs
y-travel: 400 mm quer
z-travel: 400 mm senkrecht
table surface area: 900 x 400 mm
spindle taper ISO: 40 SK
turning speeds: 30 - 3.500 U/min
total power requirement: 10,0 KW
weight of the machine ca.: 4.000 kg.
dimensions of the machine ca.: 2.470 x 2.550 x 2.300 mm LxBxH
CNC-continiuos-path control PHILIPS 432
div. tool holding fixtures,



This ad was created with MODUL MWS - the software solution of LogoTech.
1990
4,750 €  
    request
125333012 103

INDUMA 2045 SMB / 8 for sale
Universal Knee-Type Milling Machines


Workspace in x 1250 mm Workspace in Y: 370 mm Workspace in Z: 500 mm Tool holder: SK 50 Speed range: 40-1500 rpm Table size: 1700 x 350 mm Total power consumption: approx. 8 KW / 380 V Machine weight: approx. 3600 ...
used machine
 
Workspace in x 1250 mm
Workspace in Y: 370 mm
Workspace in Z: 500 mm
Tool holder: SK 50
Speed range: 40-1500 rpm
Table size: 1700 x 350 mm
Total power consumption: approx. 8 KW / 380 V
Machine weight: approx. 3600 kg

Equipment / Accessories:

3 - axis digital display
Swivel universal milling head with drilling tailstock
various recordings
Coolant system
Documentation

All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.
Each party has the opportunity to test the machine before purchasing power.
1978
3,950 €  
    request
125446686 101

DECKEL MAHO DMG DMF 250 linear for sale
Machining Center - Universal


x-travel:2500 mmy-travel:920 mmz-travel:820 mmtable surface area:3100X900 mmtable load:4,0 tcontrol:iTNC530 HEIDENHAINturning speeds:20-18.000 1/mintool change unit:30 Pos.rapid traverse:50 m/minspindle:(40/100%ED) 35/25 ...
used machine
 
x-travel:2500 mm
y-travel:920 mm
z-travel:820 mm
table surface area:3100X900 mm
table load:4,0 t
control:iTNC530 HEIDENHAIN
turning speeds:20-18.000 1/min
tool change unit:30 Pos.
rapid traverse:50 m/min
spindle:(40/100%ED) 35/25 kW
taper ISO:SK 40
total power requirement:35 kW
weight of the machine ca.:27 t
dimensions of the machine ca.:5,40 x 3,30 x 2,85 m

5 axis Universal Machiing Center with surface mounted rotary table Dia = 630 mm Controlled Head ( B - Axis ) Touch Probe Heidenhein Blum Laser Swarf Conveyer el. Handwheel Working hours 50.148 h Main Plug on 45.258 h Control on 20.973 h Programm on
2006
Price  
    request
125289998 101

DECKEL MAHO DMG DMU 50 V for sale
Universal processing centres


control Mill-Plus travel X/Y/Z 500/380/380 mm spindle speed 15000 1/min tool magazine for 2x 12 tools SK 40 (1 magazine defective) NC-swiveling/rotary table D 500 mm 5-axes simultaneously processing
used machine
 
control Mill-Plus
travel X/Y/Z 500/380/380 mm
spindle speed 15000 1/min
tool magazine for 2x 12 tools SK 40
(1 magazine defective)
NC-swiveling/rotary table D 500 mm
5-axes simultaneously processing

1996
Price  
    request
125446654 101

DECKEL MAHO DMU 200 P for sale
Machining Center - Universal


x-travel:1800 mmy-travel:2000 mmz-travel:1100 mmtable-size:D 1700 x 1400 mmtable load capacity:5000 kgtool taper:SK 50 spindle drive:30 / 20 kWturning speed range - stepless:8000 1/minnumbers of positions in the tool cha ...
used machine
 
x-travel:1800 mm
y-travel:2000 mm
z-travel:1100 mm
table-size:D 1700 x 1400 mm
table load capacity:5000 kg
tool taper:SK 50
spindle drive:30 / 20 kW
turning speed range - stepless:8000 1/min
numbers of positions in the tool changer:60
control:TNC 430 HEIDENHAIN
weight of the machine ca.:39 t
transport dimensions LxWxH:ca. 6 x 3,4 x 3,4 m
space requirements approx. LxWxH:8,5 x 9,5 x 4,2 m

5-axis CNC universal maching center, simultaneously, NC-rotary table 1.700 x 1.400mm (360000 x 0,001° indexing), Universal milling head with controlled B-axis (0,001°), mode 4 3D probe infrared HEIDENHAIN, chipconveyor, BLUM-laser, flush-gun, oilmist suction, approx. 88.500h \"machine on\", approx. 39.300h \"spindle on\" under power in factory till July 2018
2000
Price  
    request
125272657 103

DECKEL FP1 AKTIV DIGITAL for sale
Universal Tool-Milling Machines


DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982: -3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm, -Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm], -Automatic strokes X : 290 ; Y : 160 ;  ...
used machine
 
DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982:

-3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm,
-Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm],
-Automatic strokes X : 290 ; Y : 160 ; Z : 330 [mm],
-Sensitive drilling head type 2171 - stroke 100 [mm] - spindle ISO 40 - orientable -90° / 0° / +90°,
-Horizontal spindle ISO 40,
-Tilting swiveling table type 2114,
-Horizontal table dimensions : 600 x 255 [mm], 5 T slots 12 [mm]
-Vertical table dimensions : 605 x 195 [mm], 2 T slots 12 [mm],
-16 different spindle speeds from 40 to 2000 [tr/min],
-Variable power feeding from 5 to 500 [mm/min] in all 3 axis,
-Rapid feeding in all 3 axis - 1200 [mm/min],
-« Active » function controled by the HEIDENHAIN TNC 113 DRO in all 3 axis,
Bcblv9kxbw
-Coolant pump + LOC LINE coolant hose,
-Centralised automatic lubrication,
-Spindle electro-brake,
-Electrical cabinet seperated from the machine,
-Main motor power 2.0 kW,
-Dimensions : Width 1200 ; depth 1100 ; height 1700 [mm],
-Weight : 695 Kg approx.

Original DECKEL operators manual, service manual and electric plans included.



Machine in very good condition, visible under power.

Loading included, shipping possible Worldwide.

Price VAT Excl. on request.

SARL Kraffter
Lieu dit Le Sourd
73520 Saint Béron, FRANCE
Tel: +33(0)6-73-30-03-87
VAT N°: FR 17 819 707 167
1982
Price  
  FR   request
125386622 101

DECKEL MAHO (5-ACHS) DMU 70 eVo - iTNC 530 for sale
Machining Center - Universal


x-travel: 750 mmy-travel: 600 mmz-travel: 520 mmcontrol: iTNC 530 Heidenhainturning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 35 / 25 kWmax. Torque: 130 / 87 Nmtool taper: HSK A63 tabl ...
used machine
 
x-travel: 750 mm
y-travel: 600 mm
z-travel: 520 mm
control: iTNC 530 Heidenhain
turning speed range - main spindle: 20 - 18.000 min/-1
power capacity - main spindel: 35 / 25 kW
max. Torque: 130 / 87 Nm
tool taper: HSK A63
table surface area: 700 x 500 mm
rotatable: C: 360 °
max. table load: 350 kg
T-slots: 7x 14H7 x 63 mm
table turning speeds: 21,5 min/-1
tool change unit: 32 Pos.
max. tool weight: 6 kg
rapid traverse ( X / Y / Z ): 50 / 50 / 50 m/min
feed speeds: 20.000 mm/min
total power requirement: 48 kVA
weight of the machine ca.: 10 t
dimensions of the machine ca.: 3,50 x 2,65 x 2,85 m
elektr. hand wheel:
Coolantsystem:
Chip conveyor:
5 Axis-CNC-Machining Center
DECKEL MAHO - DMU 70 eVolution




This ad was created with MODUL MWS - the software solution of LogoTech.
2003
Price  
    request
125211587 103

DECKEL MAHO DMG MH 500 E 2 for sale
Universal Tool-Milling Machines


Control Philipps 432 Travel X / Y / Z 500/380/350 mm Spindle speed 4000 1 / min 4th axis NC rotary table 360 ° Tool holder SK40
used machine
 
Control Philipps 432
Travel X / Y / Z 500/380/350 mm
Spindle speed 4000 1 / min
4th axis NC rotary table 360 °
Tool holder SK40
1992
Price  
    request
125386624 101

DMG DMU 100 T / iTNC 530 for sale
Machining Center - Universal


x-travel: 1060 mmy-travel: 710 mmz-travel: 710 mmCNC-control: iTNC 530 HEIDENHAINTable dimensions: 1.500 x 795 x Ø 800 mmmax. table load: 550 kgspindle taper: BT 40 spindle turning speed range: 20 - 12.000 U/minpower ca ...
used machine
 
x-travel: 1060 mm
y-travel: 710 mm
z-travel: 710 mm
CNC-control: iTNC 530 HEIDENHAIN
Table dimensions: 1.500 x 795 x Ø 800 mm
max. table load: 550 kg
spindle taper: BT 40
spindle turning speed range: 20 - 12.000 U/min
power capacity: 10 / 15 kW
feed range: 20 - 15.000 mm/min
rapid traverse: 30 m/min
tool change unit: 32 Pos.
chip conveyor: Spiralförderer
voltage: 400 V
total power requirement: 30 kVA
weight of the machine ca.: 9,5 t
dimensions of the machine ca.: 4,30 x 2,50 x 2,55 m
coolant tank: 1,16 x 0,55 x 0,85 m
- Fabr.No.: 1114 0002853
- Machine ON: 65363
- Spindle ON: 24233
- Control: iTNC 530
- NC roundtable for 5 Axis
Simultaniouse movement
- electr. hand wheel
- spiral-chip conveyor
- coolant equipment



This ad was created with MODUL MWS - the software solution of LogoTech.
2002
Price  
    request
125211278 103

DECKEL MAHO DMG MH 700 C for sale
Universal Tool-Milling Machines


Control Philipps 432 Travel X / Y / Z 600/450/500 mm Spindle speed 3150 1 / min 4th axis NC rotary table 360 ° Tool holder SK40
used machine
 
Control Philipps 432
Travel X / Y / Z 600/450/500 mm
Spindle speed 3150 1 / min
4th axis NC rotary table 360 °
Tool holder SK40
 
Price  
    request
125386618 103

DECKEL-MAHO FP 3-50 for sale
Tool Room Milling Machine - Universal


x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mDialog 12 CNC controlelectronical hand wheelTechnische Daten / technical details:X ...
used machine
 
x-travel: 500 mm
y-travel: 400 mm
z-travel: 400 mm
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m
Dialog 12 CNC control
electronical hand wheel

Technische Daten / technical details:
X-Achse / X-travel 500 mm
Y-Achse / Y-travel 400 mm
Z-Achse / Z-travel 400 mm
Drehzahlbereich / spindle speed 32-5000 UpM
Vorschubbereich X/Y/Z / feed range X/Y/Z 2-6000 mm/min.
Eilgang / rapid feed 6 m/min.
Werkzeugaufnahme / spindle tapper SK 40
Antriebsleitung Spindel 100%ED / drive capacity spindle 100%ED 7,5 kW
Gewicht der Maschine ca. / weight 2.700 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.




This ad was created with MODUL MWS - the software solution of LogoTech.
1995
Price  
    request
125198007 103

MAHO MH 700 for sale
Universal Tool-Milling Machines


Workspace in X: 500 mm Workspace in Y: 300 mm Workspace in Z: 400 mm Tool holder: SK 40 Table size: 730 x 410 mm Speed range: 32-1600 rpm Feed: 10-750 mm / min - 3 axes Rapid traverse rate: 1,20 m. / min. Total p ...
used machine
 
Workspace in X: 500 mm
Workspace in Y: 300 mm
Workspace in Z: 400 mm
Tool holder: SK 40
Table size: 730 x 410 mm
Speed range: 32-1600 rpm
Feed: 10-750 mm / min - 3 axes
Rapid traverse rate: 1,20 m. / min.
Total power consumption: approx. 5,5 KW / 380 V
Machine weight: 2300 kg
Space: 1500 x 2200 x 1700 mm (W x D x H)

Equipment / Accessories:

Universal table with round setup of part of
Universal milling head with drilling tailstock
horizontal Milling spindle
Machine vise
Machine lamp
div. toolholders
Coolant system
Documentation

All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake.
Each party has the opportunity to test the machine before purchasing power.
1974
3,950 €  
    request
125386367 203

SCM SUPERSET XL for sale
Moulding Machine


Weight approx.: 2900 kgDimensions (l x w x h) approx.: 3250 x 1170 x 1600 mmDescription: Control ERL 100, Cutting width max. 260 mm, Cutting height max. 180 mm, Number of spindles 6. Spindle layout First bottom head / Fe ...
used machine
 
Weight approx.: 2900 kg
Dimensions (l x w x h) approx.: 3250 x 1170 x 1600 mm
Description: Control ERL 100, Cutting width max. 260 mm, Cutting height max. 180 mm, Number of spindles 6. Spindle layout First bottom head / Fence side head / Near side head / Top head / Second bottom head / universal head. Feeding speed 6-36 m/min, Spindle speed 6000 rpm max / min. Motorized cutting height ,. Length of insertion table 1800 mm. Lower spindle 2, Right spindles 2, Left spindle 1, Upper spindle 1, Spindles diameter 40 mm, Tools included, CE standards, For further information see pictures.
2003
used machinery auction RESALE 10,720 €  
  PT   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More UNIVERSAL models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Universal Milling Machines HURON MU6


Universal millich machine HURON MU6 Travels x y z 1500 x 700 x 550 mm Table size 2000 x 460 mm Universal milling head 3 Axis Dro

Universal Machining Center BURKHARDT WEBER MC 120 HV


X-travel: 1600mm, y-travel: 1250mm, z-travel: 1250mm, B-travel: 360°, max. table load: 5t, clamping surface: 2x 1000x800mm, with pallet changer.

Universal 5-Axis Machining Center MIKRON VCP/ UCP 710


X-travel: 700mm, y-travel: 600mm, z-travel: 400mm, clamping surface: 630x630mm, control: HEIDENHAIN TNC 430, length: 3400mm, width: 3500mm, height: 3500mm, weight: 10.5t.

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Elumatec DG104, E555


Double mitre saw DG 104 Description The optimal double mitre saw for series production as well as for special applications The universal pivoting and tilting of both saw units allows cutting of high and wide profiles as well as every type of compound mitre. Consequently, many profiles can be cut without support blocks External-dimension cuts possible for all cutting variants. Consequently, no complicated length calculations are necessary. This is a big advantage when cutting special angles Pivoting range with digital angle display Safety hoods Equipped with saw blades as standard Equipped with digital display E 111 as standard Pulsed coolant system Technical specifications Minimum cutting length at 90° 350 mm Minimum cutting length tilted at 45° 350 mm Pivoting range inwards 90° - 45° (up to 22.5° manual with digital display) Tilting range inwards pneumatically 90° - 45° For cutting range, see cutting diagram Saw blade diameter 420 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 4 kW Compressed air supply 7 bar Air consumption per working cycle 40 l without spraying, 64 l with spraying Cutting length 6,000 mm Options DG 104 M machine bed made of steel sheet (cutting length 4,500 mm, 6,000 mm) Software for E 555: Software module for chop and oversize length cuts MACHINE IS WELL MAINTAINED AND WORKING WITHOUT ANY PROBLEM. PERFECT CONDITION. MACHINE HAS INCLUDED E555 INDUSTRIAL PC.

Universal Milling Machines LAGUN FU 1600


Universal milling machine LAGUN FU 1600 was produced in 1990 year. Milling machine-specific data LAGOONS FU 1600: -table dimensions: 1600 x 340 mm -the scope of the work the longitudinal: 1150 mm -operating range: 330 mm -operating range vertical: 465 mm -speed range: 28/1400 RPM. -vertical feed: 12/800 mm/min. -feed: 6/240 mm/min. -tilting table: up to 45 degrees -Tools: ISO 50 -accelerators feeds

Universal Lathes Up To 800 Mm Diameter Poreba TCA-1600/6000


The device is used for machining the outer, inner and front surfaces of rotary components of larger shaft and flange diameters, threading. POREBA - TCA 160/6000 - 1962 - d1600/6000 - 2-3 steadies

Universal grinding machines KOMMUNAR 3Y131 (3U131)


Universal grinder for shafts and bores KOMMUNAR 3Y131 (3U131) produced in 1977 year in the Soviet Union. The machine is designed for external and internal grinding of cylindrical surface, and the surface of the flat flange, conical shaped. Grinder allows external grinding machines with automatic grinding wheel, on the headland of the table or a hand-fed and sanding with manual feed. Universal 3Y131 Sanders-specific data: -the maximum diameter of workpiece: 280 mm -maximum length of workpiece: 710 mm -the maximum diameter of workpiece in podtrzymce: 60 mm -height of tusks: 185 mm -maximum weight of workpiece: 55 kg -the largest grinding wheel diameter: 600 mm -rotation speed spindle grinding wheel diameter: 600 Prov 1111 Rev/min -the maximum angle of rotation of the spindle head: 30 degrees -the maximum diameter of the cut: 100 mm -maximum length of cut: 125 mm -spindle speed: 16900 RPM. -the size of the sanding spindle head stroke after bolt: 290 mm -time supply fast grinding wheel: 2 s -the size of the feeding speed, spindle head szlifirskiego from hydraulic drive: 50 mm -feed for one turn of the wheel: 0.5 mm -the value of the plot of limbusa feed precision: 0.001 mm -the value of the parcel for the diameter transverse feed limbusa: 0.005 mm -periodic feed grinding spindle head (headland of the table): 0,0025 – 0,025 mm -fast speed adjusting sanding spindle head: 240 mm/min -the amount of speed of rotation of the product: smooth, bezskokowa speed control -speed range: 40-327 RPM -angle of rotation: 0-90 degrees -dimensions of centres: SM4 -the weight of the grinder with accessories: 6200 kg -size grinding machines (at the extreme position of the moving parts): 5620 x 2585 x 1982 mm

One-sided edgebander Jaroma DCKG JAROMA DCKG


UNIVERSAL JAROMA DCKG edbander WITH PREMILLS Jarome producer Model / machine type DCKG Year of production 2007 Machine category. One-sided edgebander Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments The GCKG edgebander is designed for unilateral banding of narrow furniture elements. In addition, the edge bander allows you to perform basic machining operations such as: - cutting off the periphery at the front and the back of the element AND THE PRELIMINARY MILLING OF THE FIRST TWO CUTTING STATION - milling excess edging height - removal of the corrugated surface created during milling (scraping) of the edges of PVC and ABS - milling (rounding) corners - smoothing (polishing) the machined edges The natural and plastic edgings that can be used for processing include: standotron, veneer, PVC / ABS tape with a maximum thickness of 3 mm, wood elements with a maximum thickness of 5 mm (when machining wood attachments, cutters are not used to round the corners) .

Color Lid Printer POLYTYPE DDM 160/ 8


High-Performance Lid Printing System with automation for 1 man- operation. Automatic Infeed Conveyor to Feed Vertical Lid Stacks in-feed robot from stack reservoir to Denester Universal Screw Denester ARCOTEC Gas pre-treatment with pre-adjusted, automatically controlled gas-air mixture. Main 8-Color Print Unit Anti-ghosting inking units with fast removable, leak free ink fountains. Automatic cleaning of system rollers. Printing plate cylinder with quick locking device and micro-setting of the register for a fast reproduction. Cooling system for Fountain Rolls and 2 x oscillating rollers. No lid–no ink and no lid– no print system SIEMENS S7 PLC Controls Siemens SIMATIC PANEL OCP with Color Display. UVITERNO DBT 5545/ 1 UV-Tunnel, with 3 step switch (2/ 4/ 5.5 kW) * Real Time Camera with Display & Controls to recognize & automatically blow off faulty Printed Lids Horizontal lid re-stacker equipped with servo motor, exact lid counting and multi-stack delivery Conveyor. Data storage memory. Technical Data: Round lids: Min./max. rim diameter: 80 –180 mm Polygonal/ Rectangular lids: Min. rim dimension : 50 x 50 Max. rim dimension : 180 x 180 mm Min./max. lid height: 5/ 25 mm Max. printing speed up to (lids/h) : 30,000/ hr

Universal Tool-Milling Machines DECKEL FP1 AKTIV DIGITAL


DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982: -3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm, -Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm], -Automatic strokes X : 290 ; Y : 160 ; Z : 330 [mm], -Sensitive drilling head type 2171 - stroke 100 [mm] - spindle ISO 40 - orientable -90° / 0° / +90°, -Horizontal spindle ISO 40, -Tilting swiveling table type 2114, -Horizontal table dimensions : 600 x 255 [mm], 5 T slots 12 [mm] -Vertical table dimensions : 605 x 195 [mm], 2 T slots 12 [mm], -16 different spindle speeds from 40 to 2000 [tr/min], -Variable power feeding from 5 to 500 [mm/min] in all 3 axis, -Rapid feeding in all 3 axis - 1200 [mm/min], -« Active » function controled by the HEIDENHAIN TNC 113 DRO in all 3 axis, Bcblv9kxbw -Coolant pump + LOC LINE coolant hose, -Centralised automatic lubrication, -Spindle electro-brake, -Electrical cabinet seperated from the machine, -Main motor power 2.0 kW, -Dimensions : Width 1200 ; depth 1100 ; height 1700 [mm], -Weight : 695 Kg approx. Original DECKEL operators manual, service manual and electric plans included. Machine in very good condition, visible under power. Loading included, shipping possible Worldwide. Price VAT Excl. on request. SARL Kraffter Lieu dit Le Sourd 73520 Saint Béron, FRANCE Tel: +33(0)6-73-30-03-87 VAT N°: FR 17 819 707 167

Electro-spindle cutting machine AGIE Switzerland AGIECUT 200D


Maximum lift: X: 450 mm Y: 250 mm Z: 256 mm Tail: motion path +/- 30 mm in U / V axis X 860 mm Maximum size of clamping component: Y: 500 mm Z: 250 mm Mounting base: universal clamping base cone AGIE: 30 ° CNC control, software AGIEMATIC CD production number 406 Total input: approx. 15.7 kVA (50 Hz) Control system: not Overall dimensions: see enclosed plan Weight: approx. 3955 kg

Homogeniser Mixer Berents Becomix RW 320


Berents Becomix RW320 Universal Homogeniser Mixer for the production of cosmetics and pharmaceutical products, such as cosmetic creams, pharmaceutical creams, tooth paste, gel products, mascara, make?up etc. Nominal 300 litre batch size, suitable for up to 133.5°C product temperature, with pressure from +2 to -1 bar, jacketed for heating and cooling, scraped surface anchor stirrer with 10.5 kW drive, bottom entry emulsifier, and external circulation system.

Universal Milling Machine MAHO MH 700


X-travel: 700mm, y-travel: 400mm, z-travel: 400mm, table dimensions: 700x400mm, rotational speed: 40-2000/min, feed: 10-500mm/min, rapid traverse: 1.25m/min, connected load: 6kW, length: 1800mm, width: 1200mm, height: 1500mm, weight: 1.5t, including accessories.

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 100 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 5000 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 16i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 6000x2000 mm – 6 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Displaceable rotary table type MRD 2000x2400/2500 mm (30 tones) – 1 pc

Depositor Unifiller Universal 1000i


stainless single shot depositor, variable speed, deposit range 20g - 1000g, mobile frame

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 60 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 6200 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 31i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 4000x2000 mm – 12 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Adapter L600mm pcs.2 - Universal milling head 20kW – pcs.2

CNC Universal Milling Machine DECKEL MAHO DMU 125 P hi-dyn


X-travel: 1250mm, y-travel: 880mm, z-travel: 800mm, rotational speed: 12000/min, tool mount: SK 40, number of magazine slots: 30, NC round table dimensions: 1250x1000mm, number of T-grooves: 9x 18 H7, table load: 2t, control: MillPlus IT, length: 4600mm,  ...

CNC Universal Cylindrical Grinding Machine STUDER S40


Grinding diameter: 0.2-240mm, grinding length: 700mm, center height: 175mm, grinding length: 170mm, center width: 1000mm, max. workpiece weight: 100kg, grinding wheel diameter: 510mm, grinding wheel bore: 203mm, spindle bore: 30mm, max. feed rate: 10000mm ...

Universal swivel head milling machines UM1460-II High precision


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...

CNC Universal Milling Machines MAZAK VTC 200C II


MAZAK VTC-200 c II table 2000 x 510 X mm 1660 S mm 510 With mm 510 Spindle turns 40-12000 main engine 18.5 kW fast mm/min 36000 tool magazine 30 positions BT-40 MAZATROL CNC Year 2006

Universal drilling machines AYEN AYEN HVHV


AYEN HVHV modular drilling machine Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments DRILL DRILL 4 REAR UNITS, TWO UPPER, TWO SIDE, WORKING LENGTH 3 M ...

CNC Universal Milling Machines Goratu Lagun GBM 26


LAGUN GBM 26 Goratu Group milling machine HEIDENHAIN cnc 430 Manual head X longitudinal: 2500 mm Y-cross: 1200 mm With vertical: 1000 mm Quick movements: 15 Mt./min. Spindle connection: 50 ISO Rotation speed: 3000 rpm Spindle connection ...

Four-sided planing machines Weinig Unimat U17N


Moulder Weinig model Unimat brand U17N, 7 + 1, tour smooth shafts, shaft length 170 mm horizontal, hauling in cardano. Composition axes: Under, dx, sx, dx, over, under, over, universal. Motor power 4 + 3 + +7.5 +5.5 ACEs: 7.5 +11 +4 +11 Kw Tow motor po ...

Universal Milling Machines CORREA F2UE


Universal milling machine with automatic movement ram. Table size: 1200mmx440mm. Longitudinal travel: 1000mm. Cross travel: 250mm. Vertical travel: 420mm. Ram travel: 620mm. ISO40. Vertical head. DRO Fagor.

CNC Universal Milling and Drilling Machine DECKEL FP3A


X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, quill stroke: 80mm, tool mount: SK 40, rotational speed: 40-4000/min, feed rate: 2-3600mm/min, rapid traverse: 4000mm/min, control: Contour 3, number of available machines: 2, year of construction: 1983,  ...

Universal Milling Machines CORREA BC5000UE


Universal milling machine. Table size: 1700mmx380mm. Longitudinal travel: 1350mm. Cross travel: 350mm. Vertical travel: 525mm. ISO50. Motor power: 12,5cv. Equipped with DRO Fagor.

CNC5-Axis High Speed Universal Machining Center Mikron HSM 400 U


5-Axis -High speed Table size diameter Ø 156 mm. X-axis travel (column right / left movement) 400 mm. Y-axis travel (column back/forth movement) 240 mm. Z-axis travel (spindle up / down movement) 350 mm. Spindle taper HSK E 40. Max. / min. spin ...

Depalletizing Station Kettner with pallet handling Krones Kettner Pressant Universal,Palmagazine


Depalletizing Station Kettner with two depalletizer and pallet handling system This depalletizing station was built in two phases by Krones Kettner, glass bottle depalletizer in 1998 and can depalletizer in 2002 with fully automated pallet handling s ...

Palletizer Kettner Pressant with Pallet Wrapper Kettner and Robopack Pressant Universal, Helix HS30


Palletizer Kettner Pressant with pallet wrapper and conveyors Complete palletizing line made by Krones in 2002 with Kettner palletizer and Robopac stretch wrapper infeed and transfer table as well as case turner. This line has been palletizing 0.33 a ...

Steam Boiler LOOS 16 t/h LOOS International Universal UL-S-IE 16.000 x 16


Steam boiler Firetube LOOS Universal UL-S-IE, 16 tons per hour, 16 bar This boiler is three-pass single-flame tube/smoke tube type and it was delivered in 2003 by LOOS International. It can produce 16 tons / h saturated steam at 16 bar. It complete boi ...

Steam Boiler 13 bar 22 ton/h, natural gas LOOS Universal UL-S 22000


Steam Boiler LOOS UL-S 22 t/h - 13 bar, Natural Gas + Liquid Fuel Complete boiler plant with LOOS Universal UL-S 22000 high capacity steam boiler with exhaust gas economizer and all necessary auxiliaries, delivered in 2002 total operating hours approx  ...

Steam Boiler LOOS Universal ZFR-28000 LOOS International Double Flame ZFR-28000


Steam Boiler LOOS Universal ZFR-28000 28 tons/h 10 bar Two steam boilers made by LOOS in 2004. The boilers are identical, only working hours are different. Boilers are three-pass, double-flame smoke tube boilers with separate smoke gas passages and it ...

Universal Milling Machines CORREA F3UE


Universal milling machine with automatic movement ram. Table size: 1400mmx500mm. Longitudinal travel: 1150mm. Cross travel: 400mm. Vertical travel: 500mm. Ram travel: 750mm. ISO50. Vertical head. DRO Fagor for 4 axis.

Universal Milling Machines Reckerman Kombi 1000


Auction name: Tools and machines in Hoensbroek (1/2) Online auction Start of auction: 13 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 16 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To  ...

Semi-Automatic Volumetric Filling Machine UNIVERSAL FILLING MACHINE


Can be used for filling oil and varnish.

Universal grinding machines JARBE RH-3000


Universal cylindrical grinding machine. Travel: 3000mm. Grinding diameter: 600mm.

Universal Milling Machines Huvema HU 25 VHG


Auction name: Machine park and inventory of Mattress factory (metalworking) Online auction Start of auction: 16 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 24 April 2018 15:50 GMT +0200 (Western Europe (DST) The price listed ...

Universal Tool-Grinding Machines Walter AG Helitronic 45


OVERVIEW: Brand: Walter AG Model: Helitronic 45 Application type: Grinding Machine type: Grinding Machine Availability: Immediately Construction year: 1993 Production hours: 46000 Location: Czech Republic Origin country: Germany GENERAL DATA:  ...

CNC Turning Machines Mazak Quick Turn 10 Universal


OVERVIEW: Brand: Mazak Model: Quick Turn 10 Universal Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1982 Location: Sweden Origin country: Japan GENERAL DATA: Measurements width: 3315 mm Measurement ...

Universal machines Numafa crate washer


Used industrial electrical crates washing machine brand Numafa year1998

Depalletizing Station Kettner with pallet handling Krones Kettner Pressant Universal,Palmagazine


Depalletizing Station Kettner with two depalletizer and pallet handling system This depalletizing station was built in two phases by Krones Kettner, glass bottle depalletizer in 1998 and can depalletizer in 2002 with fully automated pallet handling s ...

Palletizer Kettner Pressant with Pallet Wrapper Kettner and Robopack Pressant Universal, Helix HS30


Palletizer Kettner Pressant with pallet wrapper and conveyors Complete palletizing line made by Krones in 2002 with Kettner palletizer and Robopac stretch wrapper infeed and transfer table as well as case turner. This line has been palletizing 0.33 a ...

Steam Boiler LOOS 16 t/h LOOS International Universal UL-S-IE 16.000 x 16


Steam boiler Firetube LOOS Universal UL-S-IE, 16 tons per hour, 16 bar This boiler is three-pass single-flame tube/smoke tube type and it was delivered in 2003 by LOOS International. It can produce 16 tons / h saturated steam at 16 bar. It complete boi ...

Steam Boiler 13 bar 22 ton/h, natural gas LOOS Universal UL-S 22000


Steam Boiler LOOS UL-S 22 t/h - 13 bar, Natural Gas + Liquid Fuel Complete boiler plant with LOOS Universal UL-S 22000 high capacity steam boiler with exhaust gas economizer and all necessary auxiliaries, delivered in 2002 total operating hours approx  ...

Steam Boiler LOOS Universal ZFR-28000 LOOS International Double Flame ZFR-28000


Steam Boiler LOOS Universal ZFR-28000 28 tons/h 10 bar Two steam boilers made by LOOS in 2004. The boilers are identical, only working hours are different. Boilers are three-pass, double-flame smoke tube boilers with separate smoke gas passages and it ...

Universal Lathes > 800 Mm Diameter Poreba TR 115 B3 Ø 1150 x 10.000


The year 2003 Manual Control Turning diameter over bed 1150 mm Turning diameter over support 800 mm Length of turning 10 000 mm Up to 15 000 kg The turnover of 500 rpm In addition, the 2 axis digital readout HeidenHain Chip conveyor 3 x podrzymk ...

Depalletizing Station Kettner with pallet handling Krones Kettner Pressant Universal,Palmagazine


Depalletizing Station Kettner with two depalletizer and pallet handling system This depalletizing station was built in two phases by Krones Kettner, glass bottle depalletizer in 1998 and can depalletizer in 2002 with fully automated pallet handling s ...

Palletizer Kettner Pressant with Pallet Wrapper Kettner and Robopack Pressant Universal, Helix HS30


Palletizer Kettner Pressant with pallet wrapper and conveyors Complete palletizing line made by Krones in 2002 with Kettner palletizer and Robopac stretch wrapper infeed and transfer table as well as case turner. This line has been palletizing 0.33 a ...

Steam Boiler LOOS 16 t/h LOOS International Universal UL-S-IE 16.000 x 16


Steam boiler Firetube LOOS Universal UL-S-IE, 16 tons per hour, 16 bar This boiler is three-pass single-flame tube/smoke tube type and it was delivered in 2003 by LOOS International. It can produce 16 tons / h saturated steam at 16 bar. It complete boi ...
Get the latest machine offers by email: order newsletter