turning used for sale

The machine is equipped with a tailstock, a 12-station tool turret as well as a 3-jaw chuck, diameter: 250 mm, manufacturer KITAGAWA, incl. chip conveyor

The machine is equipped with a sub-spindle (equipped with a 3-jaw chuck SMW AUTOBLOK, diameter: 210 mm) as well as a 12-station tool turret, incl. driven tool stations, as well as an SMW AUTOBLOK 3-jaw chuck, diameter: 250 mm, plus chip conveyor, filter extraction, documentation and CDs. Additional technical specifications: • Bed inclination: 45° • Bed diameter: 700 mm • max. slide diameter V1 to V3: 500 mm • in the front workpiece diameter: 320 mm • centre length: 1450 mm • Travel Z3-axis: 1200 mm • Spindle height axis to floor: 1043 mm • Drawbar diameter: 81 mm • Front bearing diameter: 130 mm • Resolution axis C1: 0.001° • max. weight between centers: 500 kg • Distance between two spindle noses: 1495 mm • Z1 axis travel: 1200 mm • max. workpiece length: 1140 mm • max. workpiece diameter: 450 mm • Bar capacity of sub-spindle: 50 mm • Bore diameter o ...

The machine is equipped with a tailstock, revolving steady rest, a 14-position tool turret, incl. the tool holders visible in the photos in the turret, as well as a three-jaw chuck from the manufacturer SMW, diameter: 315 mm and incl. an additional steady rest as well as chip conveyor Additional technical specifications: • nominal current: 207 A • control voltage: 220 V

The machine is equipped with a tailstock and a 12-station tool turret, incl. the tool holders located in the changer, plus a 3-jaw chuck SMW AUTOBLOK, diameter: 300 mm, incl. chip conveyor and filter extraction system as well as documentation. Additional technical specifications: • frequency: 50/60 Hz • Diameter in the front bearing: 140 mm • Feed drive in X and Z-axis: 40 x 10 mm • Feed forces X/Z: 7.5 kN • Y-axis feed force: 7000 N • rapid traverse of C1-axis: 100 m/min • Position measuring system X/Y/Z: absolute rotating • Positioning uncertainty X: 0.008 mm • Positioning uncertainty Z: 0.010 mm • Working area axis distance: 1150 mm • Swivel range over X slide: 465 mm • Swivel range over bed: max. 680 mm

Additional technical specifications: • Center distance over bed: 120 mm • Center distance over support: 60 mm

Additional technical specifications: • Center height over support: 80 mm • Center height over bed: 150 mm • Center Length: 450 mm

• nominal voltage: 80 A • spindle internal diameter: 85 mm • incl. chip conveyor

HARDINGE COBRA 42 ist eine CNC Drehmaschine für präzise, hochgenaue und zuverlässige Bearbeitung. Kapazitäten: Dreh-Ø über Bett 210 mm, Stangen-Ø 42 mm, Drehlänge/Z 355,6 mm, X 196,8 mm; Revolver 1×12, Camlock A2-5. Daten: 100–5000 t/min; Eilgang X=10 Z=16 m/min; Spindel 14 kW; 50 Hz 3×400 V; 24 kVA. Zubehör: 3-Backenfutter, Spannzangensatz, Stahlhalter. Für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhren, Maschinenbau. Technische Daten ohne Gewähr

WFL M 35 G MILLTURN ist ein CNC Dreh-Fräs-Bohrcenter hoher Präzision, Genauigkeit und Zuverlässigkeit. Leistungsdaten: Spitzenweite 2000 mm, Dreh-Ø max 520 mm, Spindelbohrung 77 mm; Verfahrwege Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Technische Daten: Hauptspindeln bis 4000 min-1, 29/33 kW (551/630 Nm), angetriebene Werkzeuge 6/13 kW, Frässpindel 9000 min-1 15/20 kW (165 Nm); Eilgänge Z 40 m/min X 30/10 m/min; Gewicht ~20000 kg; Abmessungen 7900×5700×3250 mm. Ausstattung: Lampe, Kühleinrichtung, Papierfilter, Ölnebelabsaugung, Späneförderer, automatische Be-/Entladung, Messsystem Renishaw. Für enge Toleranzen, Anwendungen in Automotive, Luftfahrt, Medizintechnik, Uhrenfertigung und Maschinenbau. Technische Daten ohne Gewähr

x-travel: 150 mm y-travel: +/- 30 mm z-travel: 620 mm chucking diameter: 165 mm Main Spindle:: spindle speed:: 6000 U/min spindle motor: 11 / 7,5 kW 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW Turret: 3x 15 Stck c-axis: 0,0001 ° y-axis: +/- 25 mm Control: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/min total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4120×2130×2815 m Horizontal lathe with main and counter spindles - Muratec Fanuc 32i-TB CNC control - Main and counter spindles -- 2x C-axis - Tool turret (3x) with Y-axis, -- 15 stations each (BMT 44) -- Powered tools on all stations, 8 kW, 6,000 rpm - Finished part gripper - Conveyor belt - Bar feeder interface - Coolant system, separate 200-litre tank - Cooling unit - High pressure to turrets 1–3 via M-function: 15 bar/40 l/min - Chip conveyor - T ...

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

faceplate diameter: 4500 mm swing diameter: 6000 mm turning height: 3500 mm Control: Siemens 840D distance between columns: 6500 mm column: max. travel: 19000 mm table load: 63 tons table rotation speed: 0,63 - 63 U/min cross-rail support horizontal: 7500 m/min cross-rail support vertical: 2500 m/min clamping table: 8000 x 5000 x 350 mm table load capacity: 25.000 kg/qm ram head dimension: 460 x 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GANTRY – Double-column milling and turning centre with movable column Retrofitted and modernised in 2009 - Siemens 840D CNC control - Drilling and milling unit, speeds 25 – 2,500 rpm - Workpiece table 8,000 x 5,000 mm - Rotary table/face plate 4,500 mm - Angular milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 700 mm turning length: 3074 mm control: Mazatrol Matrix Smooth X : 91 mm : JIS A2-11 : 4000 1/min spindle motor: 30 / 22 kW Positioning speed: 12000 1/min milling spindle drive: 24 / 22 kW : 845 mm : 430 mm : 3126 mm : -30 / +210 ° Feeds (X,z,u,w-axis): 360 ° : HSK 100 : 36 Rapid Travel X / Y / Z-Achse: 50 / 50 / 40 m/min tailstock quill taper MT: 5 total power requirement: 77,73 kVA weight of the machine ca.: 25,5 t dimensions of the machine ca.: 7,3 x 3,4 x 2,95 m - Mazatrol Smooth X CNC control - 5-axis lathe - 36-position tool changer - IKZ / spindle cooling - Standard tool set (HSK T100) included - C-axis 0.001° - Tailstock - Milling head with milling spindle speed of 12,000 rpm -- B-axis 240° (-30° / +210°) - Smw 5.1 fixed tailstock (range 85–350 mm) - Kitagawa 21 3-jaw chuck - Renishaw RMP60 wireless probe - Engraving function, thread cutting, thread star ...

Turning diameter: 920 mm Turning length: 6000 mm Control: Mazatrol Matrix Spindle bore diameter: 170 mm Spindle nose: A2-11 spindle motor: 45/37 kW spindle turning speed range: 35 - 1600 U/min Spindle nose sub spindle: Turning speed sub spindle: 35 - 1600 U/min Movement X-axis: 1025 mm Movement Y-axis: 650 mm Movement Z-axis: 6170 mm w-axis: 4816 mm B-Axis travel: +210 / -30 ° C-Axis indexing: 0,0001 ° Tool Taper: BT 50 Tools in tool magazine: 80 Milling head speed: 10000 1/min milling drive: 37 kW total power requirement: 120 kVA dimensions of the machine ca.: 13267 x 3,300 x 3,200 mm Total weight, approx.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5000 mm swing diameter: 5500 mm turning height: 3500 mm max. ram stroke: 1800 mm faceplate turning speed range: 0,5 - 50 U/min workpiece weight: 20 t feed per revolution: 0,056 - 4,25 mm rapid traverse: 2 m/min Control: Sentrol total power requirement: - kW weight of the machine ca.: - t - Sentrol CNC control system - Faceplate - 2 vertical ram supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ČKD Blansko Model: SK 25 A Year: 1960 Condition: Used Stock number: 9539 Max. turning diameter: 2500 mm Clamp plate diameter: 2400 mm Maximum workpiece weight: 14000 kg Max. workpiece height: 1600 mm Weight: 47000 kg

CNC lathe Okuma LB 3000 EX II-MY C 450 Control: OSP-300LA Year of manufacture: 2018 Internal machine no. 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm X-axis travel: 260 mm Y-axis travel: 120 mm Travel Z-axis: 510 mm Travel C-axis: 360 mm Max. turning diameter: 340 mm Max turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: - Chip conveyors - One touch IGF - Touchsetter - Main spindle Kitagawa B210 - Coolant system

Manufacturer: Buffalo Model: MICROCUT SAB LT-52 Year: 2019 Condition: Used Stock number: 6719 Control system: Siemens Maximum turning length: 460 mm Maximum turning diameter: 210 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 5000 1/min Maximum turning diameter over support: 220 mm Maximum length of travel in the X-axis: 215 mm Maximum feed in the Z-axis: 520 mm Length: 3330 mm Width: 1821 mm Height: 1930 mm Weight: 3200 kg Equipment: Chuck Chip conveyor Lace

turning diameter: 500 mm swing dia.: 800 mm turning diameter over bed: 450 mm turning length: 800 mm x-travel: 360 mm z-travel: 980 mm spindle turning speed range: 3200 U/min max. torque on the spindle: 235/939 Nm spindle bore: 110 mm turret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: TOS Model: SKIQ 8 Year: 1960 Condition: Used Stock number: 9540 Clamp plate diameter: 800 mm Max. workpiece height: 700 mm Max. workpiece weight: 2500 kg Weight: 16000 kg

The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD control system, running time: 5,876 hours.

Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg

turning diameter: 3200 mm faceplate diameter: 2800 mm turning height: 1600 mm Control: Siemens 840 dsl workpiece weight: max. 16.000 kg Dimensions (L/W/H): 5.500 x 6.450 x 4.900 mm weight - pallet system: 43.000 kg Max. turning diameter: 3,200 mm Table diameter: 2,800 mm Max. turning height: 1,600 mm Max. workpiece weight: 16,000 kg Table speed: 70 rpm Number of table speed ranges: Constant Vertical travel, Z-axis (ram stroke): 1,100 mm Horizontal travel, X-axis: 1,720 mm Working feed range: 2–2,000 mm/min Rapid traverse X/Z: 7 m/min Cross rail travel speed: 360 mm/min Main motor power: 55 kW Total installed power: 69 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Boley Theisen

Lathe Dalian CDS6241

Lathe Knuth SH180/1000 G

Manufacturer: ZPS Model No.: S60/1000 CNC Year: 2001 Condition: Used Stock number: 9546 Control system: Heidenhain Pilot 3190 Maximum turning length: 1000 mm Max. turning diameter: 275 mm Maximum length of travel in the X-axis: 275 mm Maximum feed rate in the Z-axis: 1070 mm

turning diameter: 190 mm turning length: 620 mm control: Fanuc 18 iT max. bar diameter through the spindel: 65 mm number of controlled axis: 9 y-axis: +/- 45 mm turning speed range: 4500 U/min power capacity: 15/11 kW rapid speed: m/min swivelling range: +/- 91 ° Grad number of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/min Spindelpower on driven tool: 5,5/3,7 kW tail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: m weight of the machine ca.: 12,5 t CNC- lathe with sub spindle - 2 turrets, universal for main.- or sub- spindle - upper turret switchable - Y- axis on upper turret - both turrets with 12/24 positions - collet chucks on main- and sub spindle - chip conveyor - parts catcher typ A - few toolings The data for this ad was created with ModulMWS - the software solution of Logo ...

We are pleased to offer the following CNC turning center: DOOSAN PUMA 400LMB Year: 2011 Serial No.: ML0136-004494 Specifications: 15” chuck Spindle bore: 132 mm / 5.197” Through drawbar: 116 mm / 4.56” Maximum work length: 2,028 mm / 80” Approximately 13,000 cutting hours Long-bed configuration Machine reported to be in very good condition

turning diameter: 540 mm turning length: 1020 mm control: FANUC 18 i-TB swing diameter: mm bar diameter: 65 mm travel -x axis: 555 / 185 mm travel -y axis: 160 mm travel -z axis: 1095 mm travel -z axis (sub spindle): 1065 mm spindle speed:: 5000 / 5000 1/min spindle bore: 76 / 76 mm C-Axis: 360 x 0,001°/360 x 0,001° turret head: BMT 65P / 12 Pos. milling spindle turning speeds: 10000 U/min Driven Tools: 4.000 U/min b-axis: 240 ° rapid traverse X-axis: 24 m/min rapid traverse Z-axis: 24 m/min drive capacity - spindle motor: 22 / 22 kW voltage: 400 V toolpiece magazine: chain magazine: 40 Pos. tool taper: HSK-A 63 milling drive: 15 kW driven Tools: 5,5 kW total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 4,30 x 2,30 x 2,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: CNC Turning-Milling Center Model No.: NT4200S/1000 Control: FANUC F-31-IA5 MSX711 Year of Make: 2006 Location: Germany Technical features and accessories: - y-axis - Fully indexable b-axis - Chip conveyor, right ejection - Coolant system standard - Interface for high-pressure coolant system 70 bar - Tool spindle with flow cooling - Coolant spray gun - Blowing air through the sub-spindle - Manual tool presetting in the main spindle - Signal light 3-colour - Double footswitch - Simultaneous 5-axis machining - Automatic power shutdown - Tool offset for 5-axis machining - Programmable data input - Dynamic exchange of diameter/radius - Lifting test before movement Turning length: 1,000 mm Bar passage: max. 65 mm Main spindle: Max. speed: 5,000 rpm Drive power: 22/ 15 kW Spindle passage: Ø 73 mm Sub-spindle: Max. speed: 5,000 rpm Drive power ...

Key data: 26 mm

Control: Traub TX 8i Main spindle max. rod Ø: 26 mm Max. speed: 8,000 rpm Sub-spindle max. rod Ø 26 mm Max. speed: 8,000 rpm Tool system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front apparatus 5-way with Z3 carriage without drive Reverse processing station (5 tools) without drive IEMCA BOSS 432/44 Bar Feeder

The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm. Additional technical specifications: • Swing circle diameter: max. 700 mm • Rapid traverse: 17.5 m/min • Collet chuck: ISO DIN 173E • Tool holder square: 20 x 20 mm • Tool holder round: 20/25 mm • C-axis resolution: 0.1° • tool places: 14 pieces external • Main spindle: 5, internal: 3 + 4 • Driven tool stations: 2 • Simultaneous machining: inside and outside • spindle power: 7,5 kW

With technical documentation and accessories, such as three-jaw chuck, clamping jaws and collets. Additional technical specifications: • Max. swing circle: 360 mm • Collet chuck: ISO DIN 163 E • Tool holder square: 16 x 16 mm • Tool holder Round: 20 mm • Spindle power: 5,5 kW • Tool places in total: 7 pieces - External: 4 / Internal: 3

With documentation and accessories including a two-jaw chuck, diameter: 165 mm, basic tool holders, as well as a collet chuck 173E-42 B. Additional technical specifications: • max. Load: 11,0 kW • Swing diameter over bed: 510 mm • Swing diameter over cross slide: 290 mm • max. turning diameter (recommended): 170 mm • max. turning diameter (technical): 320 mm • travel of X-axis: 400 mm (160 + 15 mm) • travel of Z-axis: 330 [550] mm For further technical data, please refer to the photographed machine specification.

With technical documentation and accessories such as tool holders and a two-jaw as well as a three-jaw chuck, incl. SCHUNK clamping jaws, diameter: 165 mm. Additional technical specifications: • spindle chuck diameter: 169 mm • boring bar diameter: 25 mm • cutting feed X, Z: 0.001 - 500.000 mm/rev

Manufacturer: Star Model No.: ECAS 20T Year: 2008 Condition: Used Stock number: 9553 Control system: Siemens Sinumerik Operating hours: 6000 h Maximum spindle speed: 10000 1/min Max. rod diameter: 20 mm Length: 2588 mm Width: 1150 mm Height: 1765 mm Weight: 3500 kg

Manufacturer: Tornos Model: Deco Sigma 8 Year: 2007 Condition: Used Stock number: 9554 Control system: FANUC Series 32i-MODEL A Operating hours: 15200 h Maximum spindle speed: 15000 1/min Max. rod diameter: 10 mm Length: 1670 mm Width: 870 mm Height: 1650 mm Weight: 1600 kg

Key data: 340 mm, 1000 mm, 3500 1/min

Stock No.: 4021 CNC LATHE Manufacturer: Okuma, Type: LB300MY-1SC 1000 Serial No.: 164, Year of manufacture: 1999 Specifications: Max. circumferential diameter 340 mm dia. Max. turn. About bed 530 mm Dia. Turning length 1000 mm Main spindle speed range 3500 rpm Spindle bore 70 mm dia. C axis - main spindle movement 0.001 X axis movement 260 mm Y axis +70 / -50 Tool turret with 12 stations Driven tools 4000 rpm Control OSP 7000L Operating hours spindle 5898 Accessories:                             Hydraulic Main Center Chuck Kitagawa HoH 12" / 304mm Tool setter                         Chip conveyance.                      Cooling water system.                    Hydraulic tailstock.               Dimensions: Length: - mm, Height: - mm, Width: - mm, Weight ...

Turning milling center Manufacturer: DMG Mori Type NLX 2500/700 Year of construction 2023 Control M730UM Mitsubishi with Celos Turning length 700mm 12 tool stations, all 12 of which are driven Y-axis Bar passage 91mm Program runtime Head1 5000h Machine running time approx. 11,000h Bar loading magazine TOP Automazioni 3m Incl. tool package NP 64.000 euro Machine is in TOP condition

Key data: 685 mm, 635 mm

Circumference over bed 685 mm Turning diameter over carriage 465 mm Turning length 635 mm Speed range 5000 rpm Drive power 100/40% 25 /37 KW Weight 6500 KG CNC HEIDENHAIN Pilot BERG Chuck 12-fold SAUTER revolver VDI 40 m. WZ Tailstock hydraulic Chip conveyor 25 steel holders 8 drill rod holders 10 antr. Holder axisl u.radial

SCHAUBLIN 202 TG-CNC W25-0127 ist ein CNC-Dreh-, Fräs- und Schleifzentrum mit hoher Präzision, großer Genauigkeit und zuverlässiger Bauweise. Arbeitsvermögen: Spitzenhöhe 60 mm, Vorschubweg Z 300 mm, X 150 mm, Spannbohrung 19 mm; Lineares Auflösungsvermögen 0,0001 mm, C-Achse 0,0001°. Technische Daten: Spindeldrehzahl bis 7000 t/min, Spindelleistung 5/6 kW, Drehmoment 26,1/35,1 Nm, Eilgang 20 m/min (X/Z), Anschluss 3x 400 V 50 Hz; Gewicht ca. 3000 kg; Abmessungen L1930×B1300×H2040 mm. Ausstattung: Spannzangenaufnahme Typ W25, integrierte C-Achse. Erreicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

CITIZEN CINCOM R 04 VI ist ein CNC-Langdrehautomat (Swiss-Typ) mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Kapazität: Ø max 4 mm, Drehlänge 40 mm, Spindeldurchlass 9 mm, Gewinde bis M3. Daten: 6 Achsen, 2 Spindeln, bis 20000 t/min, Spindelleistung 0,5/0,75 kW, 15 Stationen; Drehwerkzeuge 5, Bohrwerkzeuge 4, Querwerkzeuge 2, Schaft 8 mm; Anschluss 3x400 V 50 Hz, Gewicht ~850 kg, Abmessungen 1485×560×1410 mm. Zubehör: LNS TRYTON 107 Hybrid Lademagazin, Teilefänger, Kühlsystem, Ölnebelabsaugung ELBARON, Lampe. Geeignet für enge Toleranzen in Automotive, Uhrenindustrie, Medizintechnik, Luftfahrt. Technische Daten ohne Gewähr

TRAUB TNX 65/42 ist ein CNC Kurzdrehautomat mit fester Spindel, für präzise, hochgenaue und zuverlässige Bearbeitung. Drehlänge 220 mm; Spindeldurchlass 65 mm; Z 300 mm (2 Schlitten), Y 140 mm. Spindel 5000 U/min; Gegenspindel 7000 U/min. 2 Revolver; Werkzeuge 10/8, angetriebene 10/3 (6000 U/min); C 0,001°. Anschluss 50Hz 3×400V; 95 kW (80 kVA). Gewicht ~9000 kg; L5480×B3100×H3200 mm. Geeignet für enge Toleranzen in Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

faceplate diameter: 2500 mm swing diameter: 3300 mm turning height: 2200 mm workpiece weight: 15000 kg vertical adjustment of the crossrail: 1600 mm turning speed range - faceplate: 1 - 90 U/min main drive motor: 60 kW ram head swiveling: +/- 35 ° ram head - cross travel: 1200 mm ram head - vertical travel: 720 mm feed range: 1 - 3000 mm/min Control: FANUC 0i-TF total power requirement: ca 70 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 4,8 x 4,8 x 5 m Complete overhaul in 2026 - CNC FANUC 0i-TF - 1 ram on crossbeam - 4 clamping jaws for face plate - CE -- mechanical overhaul of all components (adjustment of the geometrical parameters of the machine according to ISO 3655) -- Grinding of the guides -- New telescopic covers -- FANUC main motor -- new electrics and CNC control -- new Fanuc servomotors -- ball screws dia. 50mm -- new hydraulics The data for this ad w ...

faceplate diameter: 5000 mm swing diameter: 8000 mm turning height: 4000 mm ram head dimension: 360 x 360 mm faceplate turning speed range: 0,6 - 60 U/min workpiece weight: 160 t main drive motor: 2x 70 kW control: FANUC total power requirement: - kW weight of the machine ca.: 85 t dimensions of the machine ca.: -- m The machine will be overhauled and modernised (upon order) and fitted with: - Fanuc CNC control system (latest model) - New electrical system - New hydraulic components: pumps, lubrication systems, hoses, valves, etc. - All assemblies and sub-assemblies will be cleaned, inspected and replaced where necessary. - 2 rams supports on the crossbeam CROSS-RAIL TOOL HEAD (ARM TOOL CARRIAGE) - Axial ram travel (Ram stroke) — 2500 mm - Horizontal carriage travel — 3400 mm - Swivel angle / Tiltability — 15 - 45° - Cross-rail travel (Arm travel) — 3600 mm - Saddle travel —  ...

faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 2060 mm workpiece weight max.: 18000 kg faceplate turning speed range -stepless-: 1,02 - 92 U/min rapid traverse of cross-rail: 2500 mm/min slide adjustment: 2400 mm main drive motor: 60 kW Control: Fanuc 0iTF total power requirement: 75 kW weight of the machine ca.: 62,8 t dimensions of the machine ca.: 6,6 x 5,8 x 5,4 m Overhauled/modernized in 2026 - Complete replace of hydraulic & lubrication installation - New ball screws installed - Replace of electric installation and of command - Mechanical elements retrofitted and grinding of guideways (adjustment of the geometrical parameters of the machine according to ISO 3655) equipped with: - CNC control FANUC 0iTF - FANUC Drives and Motors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock No.: 4026 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 26D Proline Serial No.: 05 385, Year of manufacture: 2005 Specifications: Size Diameter 26 Ma. Turning length (fixed guide bush) 320 Main spindle speeds 0-8000 Main Spindle 5.5 effect Sub-spindle                        Sub-spindle max dia. 26 C Axis Headspindle 5 Rapid traverse 32 Control Maier Pro - GE Fanuc Axis Controlled 9 Stanglademagazin FMB 3200 - NO. R-826374 – 2010

Stock No.: 4028 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 32D Proline Serial No.: 06-503, Year of manufacture: 2006 Specifications: Size Diameter 32 Main spindle speeds 6000 Main Spindle 5.5 effect Sub-spindle 3.7 kw Gengen Spindle 6000 C Axis Headspindle 5 C acshen sub-spindle 5 X-1 axis                            X2 Ashes                          X3 Ash                          Z1 Ash                           Z2-Acshe                           Z3 Ash                           Y-axis                            Rapid traverse 32 Control system MAIER PRO - FANUC 31iTA Axis Controlled 9 Opreation time 36749 Cutting time 9315 Tool holder 1 5 pc. 16x16 mm - 4 pc. Red. Tool  ...

The machine is in good technical condition; it can be tested by prior arrangement.