british flag
Resale Logo

turning used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information dealer of used printing presses  CGM Celik Graphische Maschinen  http://www.cgm-celik.de 
banner logo
start page > keywords turning > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125479932 102

WEIKA FL 2200 for sale
Facing Lathes


PLAN lathe WEIKA FL 2200 04-07-001 shipping time: immediately number: 04-07-001 manufacturer: Weika type: FL 2200 MACHINE data year: Mint L x W x H: CA. 3400 x 2300 x 2300 mm weight: approx. 8000 kg Neuwertiger - S ...
used machine
 
PLAN lathe WEIKA FL 2200 04-07-001 shipping time: immediately number: 04-07-001 manufacturer: Weika type: FL 2200

MACHINE data year: Mint L x W x H: CA. 3400 x 2300 x 2300 mm weight: approx. 8000 kg

Neuwertiger - State technical data digital display: 2 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 2200 mm

Maximum turning length: approx. 700 mm spindle: speed range: approx. 9-75 RPM maximum workpiece weight: approx. 3000 kg power: approx. 11 kW plan feed (X-axis) - continuous: approx. 2-57 mm / min max plan procedures area: 1150 mm plan - rapid traverse: approx. 0.5 m / min Längsw EC (Z axis) - manually: approx. 400 mm accessories â?¢ faceplate Ã? 2000 mm â?¢ steel bracket â?¢ machine documentation â?¢ work lamps â?¢ various wrenches â?¢ emergency - off â?¢ pivoting Panel additional accessories on request price and other specifications on request age
2017
Price  
    request
125493082 102

WEISSER HEILBRONN Goliath for sale
Center Lathe


turning diameter over bed:450 mmturning diameter over slide rest:250 mmturning length:2000 mmworkpiece weight max.:1600 kgmax.workpiece weight:each extra steadyrest:450 kgturning speeds:10 - 1400 1/minspindle bore:70,0 m ...
used machine
 
turning diameter over bed:450 mm
turning diameter over slide rest:250 mm
turning length:2000 mm
workpiece weight max.:1600 kg
max.workpiece weight:each extra steadyrest:450 kg
turning speeds:10 - 1400 1/min
spindle bore:70,0 mm
steady:keine
morse taper:6
total power requirement:18 kW
weight of the machine ca.:4,0 t
dimensions of the machine ca.:4000x 1200 x 1750 mm

Accessories: 3- jaw chuck SCHUNK D = 315 mm 4 pcs. toolholder System IDEAL Manual Cooling-System
1981
Price  
    request
125479926 102

WEILER PRIMUS for sale
Bench Lathes For Precision Mechanics


MECHANIC lathe WEILER PRIMUS 04-04-003 delivery: immediately number: 04-04-003 manufacturer: Weiler type: Primus MACHINE data built: approx 1980 L x W x H: 1200 x 650 x 1500 mm weight: approx. 350 kg Good general c ...
used machine
 
MECHANIC lathe WEILER PRIMUS 04-04-003 delivery: immediately number: 04-04-003 manufacturer: Weiler type: Primus

MACHINE data built: approx 1980 L x W x H: 1200 x 650 x 1500 mm weight: approx. 350 kg

Good general condition specifications digital display (optional): 2 or 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 245 mm max. turning diameter over support: approx. Ã? 180 mm maximum turning length: approx. 450 mm bar passage: approx. Ã? 23 mm spindle: speed range: approx. 30-3000 rpm spindle nose: A 2 - 4 power: approx. 1.5 kW tailstock: MK 2 accessories â?¢ 4 - bake - chuck Ã? 140 mm Röhm â?¢ quick-change - steel bracket + 1 â?¢ machine documentation â?¢ coolant system

â?¢ Work lamps â?¢ various wrenches â?¢ left / right â?¢ emergency - off accessories on request price and other specifications on request
1980
Price  
    request
125490316 101

SIGMA Flexi 7P-4AX for sale
Machining Center - Universal


x-travel:2 x 1.500 1 x 2.100 mmy-travel:700 mmz-travel:950 mmmax. workpiece dimensions:D = 860 x 700 mmmax. table load:2 x 1.400 oder 1 x 2.500 kgtravels table: : X-Axis (table longitudinal):2 x 1.000 x 730 mmX-Axis ...
used machine
 
x-travel:2 x 1.500 1 x 2.100 mm
y-travel:700 mm
z-travel:950 mm
max. workpiece dimensions:D = 860 x 700 mm
max. table load:2 x 1.400 oder 1 x 2.500 kg
travels table: :
X-Axis (table longitudinal):2 x 1.000 x 730 mm
X-Axis (table linked):1 x 2.100 mm
Y-Axis (table transversal):700 mm
Z-Axis (Head vertical):950 mm
B-Axis (Swiveling head):+/- 110 °
C-Axis (prepared 5. Axis, rotary table):+/- 360 °
main spindle :
Max. Power, ED 100/40% :22/23 kW
Max. Torque, ED 40%:180 Nm
turning speed range:40 - 12.000 U/min
Swiveling range B-Axis:+/- 110 °
Tool taper DIN 69871:SK 40
Pull stud:DIN 69872
total power requirement:22/33 kW
weight of the machine ca.:15 t
dimensions of the machine ca.:6 x 4 x 3 m

Two machine tables inside the working area, movable separately for pendulum machining, linkable for long workpieces Equipment & Accessories ? 2 pcs. Zero-Point clamping system mounted on both machine tables ? 30 pcs. Tool taper SK 40 ? NC-rotary table manufacturer LEHMANN, type EA-431.2A, with clamping yoke and counter bearing ? 3D-touch probe ? Machine housing with fully closed working area ? 2 pcs. chip conveyor ? Refrigerating unit for spindle cooling ? Electronic handwheel HR410
2008
Price  
    request
125479923 102

WEILER COMMODOR for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet can 04-03-222 delivery time: immediate number: 04-03-222 manufacturer: Weiler type: can MACHINE data built: approx 1980 L x W x H: approx. 2700 x 1200 x 1800 mm weight: approximately 1500 kg Ver ...
used machine
 
L + Z lathe hamlet can 04-03-222 delivery time: immediate number: 04-03-222 manufacturer: Weiler type: can

MACHINE data built: approx 1980 L x W x H: approx. 2700 x 1200 x 1800 mm weight: approximately 1500 kg

Very good condition - from stately authority technical data digital display: 3 - axes - digital display (new) dimensions: Max turning diameter over bed: approx. Ã? 380 mm max turning diameter over support: approx. Ã? 190 mm maximum turning length: approx. 1000 mm Stangendurc "hlass: approx. Ã? 56 mm spindle: speed range: approx. 25-2000 RPM spindle nose: A 2 - 6 power: approx. 4,0 kW automatic longitudinal & plan vorschuebe: feed range: 0,026-1,253 mm / U suitable for threads: - metric 0.35 - 12 mm - inch 44-2 Gg /"

-Diametral - Pitch threaded 88 - 5 DP - module 0.2 - 4 live: MK 4 Accessories â?¢ 3 - bake - chuck Ã? 200 mm Röhm â?¢ quick change Toolpost + 3 inserts â?¢ bed fence â?¢ complete machine documentation â?¢ various wrenches â?¢ feet â?¢ cow lmitteleinrichtung other accessories on request price and other specifications on request
1980
Price  
    request
125490196 702

FORTUNA Fortuna/Schröder Gr. 3 for sale
fullautomatic divider + rounder, fabr. Fortuna 3,


Type Automat, 30 pcs., 32 - 70 g\r\nmanually head turning backwards\r\n

 
Type Automat, 30 pcs., 32 - 70 g\r\nmanually head turning backwards\r\n
 
Price  
    request
125479919 102

WEILER PRAKTIKANT 160 B for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet intern 160 B - 04-03-221 delivery: immediately number: 04-03-221 manufacturer: Weiler type: intern 160 B MACHINE data year: approx. 1991 L x W x H: approx. 1700 x 1000 x 1700 mm weight: approx. 650 ...
used machine
 
L + Z lathe hamlet intern 160 B - 04-03-221 delivery: immediately number: 04-03-221 manufacturer: Weiler type: intern 160 B

MACHINE data year: approx. 1991 L x W x H: approx. 1700 x 1000 x 1700 mm weight: approx. 650 kg

Very good condition specifications digital display: 3 - axes - digital display safety dimensions: Max turning diameter over bed: approx. Ã? 320 mm maximum turning diameter over support: approx. Ã? 198 mm maximum turning length: approx. 650 mm bar passage: approx. Ã? 40 mm SPI Handel: speed range: approx. 96-2500 RPM spindle nose: A 2 - 5 power: approx. 2.2 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.007 - 0.63 mm / Rev suitable for threaded: - metric 0.25 - 8 mm - inch 80-2 Gg / "- Diametral - Pitch thread" 200-5 DP - module 0.2-4 live: MK 3 accessories â?¢ 4 - bake - chuck Ã? 160 Röhm â?¢ hand tension - tension clamp Assembly 386E â?¢ various collets 386E â?¢ quick change Toolpost + 3 inserts â?¢ work light â?¢ coolant system â?¢ complete MASC hinendokumentation â?¢ emergency â?¢ drill Chuck for tailstock â?¢ revolving tailstock tip â?¢ various wrenches â?¢ L + Z spindle - cover

Accessories on request price and other specifications on request
1991
Price  
    request
125490218 702

ESBACK Fettbackgeräte for sale
deep-fat-frying-devices, fabr. Esback


48 Berliner/Donuts\r\nstainless steel , moveable, turning system\r\ndimension: inside 890 x 725 x 130 mm\r\n outside 950/ 2150 with dropping plate x 780 x 680/940 mm with table\r\ncontains approx. 50 kg  ...

 
48 Berliner/Donuts\r\nstainless steel , moveable, turning system\r\ndimension: inside 890 x 725 x 130 mm\r\n outside 950/ 2150 with dropping plate x 780 x 680/940 mm with table\r\ncontains approx. 50 kg fat, cap. approx. 480 - 576 donuts/h\r\naccessories: 1 turning system for Berliner/Donuts\r\n 1 dropping screen\r\n 1 dropping plate, 1 lid\r\n
 
Price  
    request
125479917 102

WEILER CONDOR VS for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe WEILER CONDOR VS 04-03-220 delivery: immediately number: 04-03-220 manufacturer: Weiler type: Condor VS MACHINE data year: approximately 1978 L x W x H: approx. 1600 x 1000 x 1800 mm weight: 800 kg Goo ...
used machine
 
L + Z lathe WEILER CONDOR VS 04-03-220 delivery: immediately number: 04-03-220 manufacturer: Weiler type: Condor VS

MACHINE data year: approximately 1978 L x W x H: approx. 1600 x 1000 x 1800 mm weight: 800 kg

Good general condition specifications digital display (optional): 2 or 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 320 mm maximum turning diameter over support: approx. Ã? 160 mm maximum turning length: approx. 800 mm bar passage: approx. Ã? 38 mm spindle: speed range: approx. 12-2800 RPM spindle nose: A 2 - 5 power: approx. 3.8 kW automatic longitudinal & plan vorschuebe: feed range: 0.037 1,253 mm / U suitable for threads: - metric 0.35 - 12 mm - inch 50-1.5 Gg / "- diametrically opposed" -Pitch thread 100 - 4 DP - module 0.2 - 6 live: MK 3 accessories â?¢ 3 - bake - chuck Ã? 160 mm â?¢ quick - clamping Collet device (prepared) â?¢ quick change Toolpost + 2 Inserts â?¢ complete machine documentation â?¢ emergency - off â?¢ various length chlüssel â?¢ bed fence â?¢ coolant system â?¢ various change gears

Accessories on request price and other specifications on request
1978
Price  
    request
125490024 702

JUFEBA Fettbackgeräte for sale
deep-fat-frying-devices, Jufeba, type WW-GW 10A, 4


automatic, stainless steel \r\ndimensions 880 x 740 x 145 mm, contains approx. 30 kg fat\r\ntotal 1200/2050 x 900 x 1200 mm\r\ncap. approx. 480 - 576 Berliner/donuts/h\r\naccessories: 1 turning dev ...

 
automatic, stainless steel \r\ndimensions 880 x 740 x 145 mm, contains approx. 30 kg fat\r\ntotal 1200/2050 x 900 x 1200 mm\r\ncap. approx. 480 - 576 Berliner/donuts/h\r\naccessories: 1 turning device, 1 dropping screen\r\n 1 dropping plate, 1 lid
 
Price  
    request
125479914 102

WEILER MATADOR VS TEILÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe WEILER MATADOR VS without -04-03-217 delivery: upon request number: 04-03-217 manufacturer: Weiler type: Matador VS without . MACHINE data built: approx 1980 L x W x H: 1500 x 800 x 1500 mm weight: appr ...
used machine
 
L + Z lathe WEILER MATADOR VS without -04-03-217 delivery: upon request number: 04-03-217 manufacturer: Weiler type: Matador VS without .

MACHINE data built: approx 1980 L x W x H: 1500 x 800 x 1500 mm weight: approx. 550 kg

Very good condition - without - picture similar

(Click on without to see the extent of the overhaul)

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 280 mm max turning diameter over support: approx. Ã? 160 mm maximum turning length: approx. 500 mm bar passage: approx. Ã? 36 mm spindle: speed range: CA. 15 -. 3550 RPM spindle nose: A 2 - 5 power: approx. 3.0 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.05 - 0.80 mm / U suitable for threaded: - metric 0.2 - 12 mm - inch 80-2 Gg / "- Diametral - Pitch threaded 160-6 DP - module 0.1-4"

Tailstock: MK 3 accessories â?¢ 3 - bake - chuck Ã? 160 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off â?¢ drill Chuck for tailstock new â?¢ with ongoing tip for tailstock new â?¢ various wrenches â?¢ feet â?¢ leit & spindle - cover (optional) â?¢ motor with motor brake (option) â?¢ clamping Collet device (option)

Accessories on request price and other specifications on request
1980
Price  
    request
125490028 702

REIMELT Fettbackanlage, Reimelt for sale
deep-fat-frying-devices, for Berliner, Reimelt, ty


4 heatingzones each 15 KW = 60 KW\r\nfat basin stainless steel\r\naccessories: output\r\n deep fat frying device incl. conveyor\r\n and 2 turning system\r\n  ...

 
4 heatingzones each 15 KW = 60 KW\r\nfat basin stainless steel\r\naccessories: output\r\n deep fat frying device incl. conveyor\r\n and 2 turning system\r\n electrical panel
 
Price  
    request
125479911 102

WEILER COMMODOR 230 TEILÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet can 230 without -04-03-216 delivery: upon request number: 04-03-216 manufacturer: Weiler type: can 230 without . MACHINE DATA Year of construction: approx. 1990 L x W x H: approx. 2700 x 1200 x  ...
used machine
 
L + Z lathe hamlet can 230 without -04-03-216 delivery: upon request number: 04-03-216 manufacturer: Weiler type: can 230 without .

MACHINE DATA
Year of construction: approx. 1990 L x W x H: approx. 2700 x 1200 x 1800 mm weight: approximately 1600 kg

Very good condition - without - picture similar
(Click on without to see the extent of the overhaul)

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 475 mm max. turning diameter over support: approx. Ã? 270 mm maximum turning length: approx. 1000 mm bar passage: approx. Ã? 56 mm spindle: speed range: approx. 13- 2000 RPM spindle nose: A 2 - 6 power: approx. 7.5 kW automatic longitudinal & plan vorschuebe: feed range: suitable for thread about 0.014 1.00 mm / U: - metric 0.30 mm - 10 mm - 80-2 3/4 inch Gg / "- Diametral - Pitch thread 80-5.5 DP - module 0.2" -5 live: MK 4 Accessories â?¢ 3 - bake - chuck Ã? 200 mm new â?¢ quick change Toolpost + 3 inserts â?¢ electric Chuck guard â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off â?¢ drill Chuck for tailstock new

Tailstock new tip with â?¢ current â?¢ various wrenches â?¢ machine feet

Accessories on request price and other specifications on request
1990
Price  
    request
125490284 702

SEEWER RONDO Wickelmaschinen - Hörnchen for sale
croissantline, fabr. Seewer Rondo , type Croma m


working width 604 mm, cap. max. 2.400 pcs./h\r\ncap. depends on the dimensions of the croissant\r\naccessories: input belt 600 mm\r\n cutting device\r\n a) croissantcutter\r\n  ...

 
working width 604 mm, cap. max. 2.400 pcs./h\r\ncap. depends on the dimensions of the croissant\r\naccessories: input belt 600 mm\r\n cutting device\r\n a) croissantcutter\r\n 4 rows h 130, w 160 mm\r\n cutting cylinders, longitudianal\r\n cutting, 4 stripes 130 mm \r\n b) croissantcutter\r\n 5 rows h 105, w 90 mm\r\n cutting cylinders, longitudianal\r\n cutting, 5 stripes 105 mm \r\n croissant-turning station \r\n croissant molder, belt width 250 mm
 
Price  
    request
125479903 102

WEILER DA 210 X 1000 TEILÜBERHOLT for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet DA 210 X 1000 without -04-03-215 delivery: upon request number: 04-03-215 manufacturer: Weiler type: DA 210 x 1000 without . MACHINE data year: approx. 1991 L x W x H: approx. 2500 x 1200 x 1800 m ...
used machine
 
L + Z lathe hamlet DA 210 X 1000 without -04-03-215 delivery: upon request number: 04-03-215 manufacturer: Weiler type: DA 210 x 1000 without .

MACHINE data year: approx. 1991 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approximately 1500 kg

Very good condition - without - picture similar
(Click on without to see the extent of the overhaul)

TECHNICAL data digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 435 mm max turning diameter over support: approx. Ã? 245 mm maximum turning length: approx. 1000 mm bar passage: approx. Ã? 52 mm spindle: speed range: approx. 33 -. 1500 rpm spindle nose: A 2 - 6 power: approx. 5.5 kW automatic longitudinal & plan vorschuebe: feed range: approx. 0.036 4,038 mm / U suitable for threads: - metric 0.5 - 28 mm - inch 56-1 Gg / "- Diametral - Pitch thread 112-2 DP - module 0.25 14"
Tailstock: MK 4 Accessories â?¢ 3 - bake - chuck Ã? 200 mm new â?¢ quick change Toolpost + 3 inserts â?¢ bed fence â?¢ work light â?¢ coolant system â?¢ complete machine documentation â?¢ emergency - off â?¢ revolving tailstock new tip â?¢ Bohrfutt He for tailstock new â?¢ feet â?¢ various wrenches

Accessories on request price and other specifications on request
1991
Price  
    request
125489836 702

FORTUNA Vollautomat, Fortuna/Schröder Gr. 3 for sale
fullautomatic divider + rounder, fabr. Fortuna 3,


Type Automat, 30 pcs., 32 - 70 g\r\nhead turning backwards\r\n

 
Type Automat, 30 pcs., 32 - 70 g\r\nhead turning backwards\r\n
 
Price  
    request
125479901 102

WEILER ERGODOR for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z lathe hamlet ERGODOR 04-03 212 delivery time: immediate number: 04-03-212 manufacturer: Weiler type: Ergodor MACHINE data built: approx 1980 L x W x H: approx. 1600 x 1000 x 1700 mm weight: approx. 700 kg Goo ...
used machine
 
L + Z lathe hamlet ERGODOR 04-03 212 delivery time: immediate number: 04-03-212 manufacturer: Weiler type: Ergodor

MACHINE data built: approx 1980 L x W x H: approx. 1600 x 1000 x 1700 mm weight: approx. 700 kg

Good general condition specifications digital display: 3 - axes - digital display new dimensions: Max turning diameter over bed: approx. Ã? 320 mm maximum turning diameter over support: approx. Ã? 160 mm maximum turning length: 470 mm bar passage: approx. Ã? 36 mm spindle: Dr ehzahlbereich: approx. 30-3550 RPM spindle nose: A 2 - 5 power: approx. 3.0 kW automatic longitudinal & plan vorschuebe: feed range: 0.020 2,0 mm / U suitable for threaded: - metric 0,20 - 12 mm - inch 80-2 Gg / "- Diametral - Pitch threaded 160 5.5" DP - module 0.1-4 live: MK 3 accessories â?¢ clamping Collet device (386E) â?¢ various collets (386E) â?¢ quick change Toolpost + 3 Inserts â?¢ complete machine documentation â?¢ coolant system â?¢ bed fence â?¢ various change gears â?¢ N OT - off â?¢ top running with Chuck for tailstock - for tailstock â?¢ various wrenches â?¢ machine feet

Accessories on request price and other specifications on request
1980
Price  
    request
125489854 702

TEMAG Durchlauf-Fettbackanlage, Fab. Temag for sale
deep-fat-frying-devices, fabr. TEMAG, type FG, st


for continous frying with turning system, smelting device, storage tank

 
for continous frying with turning system, smelting device, storage tank
 
Price  
    request
125465522 102

COLCHESTER TORNADO 200 for sale
CNC Turning Machines


OVERVIEW: Brand: Colchester Model: TORNADO 200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1995 Production hours: 5900 Location: Germany Origin country: England  ...
used machine
 
OVERVIEW:
Brand: Colchester
Model: TORNADO 200
Application type: Turning
Machine type: Lathe
Availability: Immediately
Construction year: 1995
Production hours: 5900
Location: Germany
Origin country: England

GENERAL DATA:
Measurements width: 2455 mm
Measurements depth: 1420 mm
Machine weight: 3000 kg

MAIN DRIVE:
Number of spindle: 1
Spindle speed range: 5000 1/min

CONTROL UNIT:
Brand: GE FANUC
Model: Series O-T

MOVEMENT:
X-AXIS movement: 215 mm
Z-AXIS movement: 400 mm

WORKPIECE:
Workpiece drm: 250 mm

TURRET:
Number of turrets: 12

TOOLS:
Max tool diameter: 40 mm

MEDIA:
Power consumption: 45 kVA
Chip conveyer: yes
Internal cooling: yes

ADDITIONAL EQUIPMENT:
1 - 29x Tool holder
1995
Price  
  DE   request
125489894 702

ESBACK Fettbackgeräte for sale
deep-fat-frying-devices, fabr. Esback, 48 Berliner


stainless steel , moveable, turning system\r\ndimension: inside 884 x 724 x 130 mm\r\n outside 1050/1930 x 890 x 1220 mm\r\ncontains approx. 50 kg fat, cap. approx. 480 - 576 donuts/h\r\naccessories:  ...

 
stainless steel , moveable, turning system\r\ndimension: inside 884 x 724 x 130 mm\r\n outside 1050/1930 x 890 x 1220 mm\r\ncontains approx. 50 kg fat, cap. approx. 480 - 576 donuts/h\r\naccessories: turning system for Berliner/Donuts\r\n
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Turning Machines (Lathes) Pinacho SE-200


OVERVIEW: Brand: Pinacho Model: SE-200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Location: Spain Origin country: Spain GENERAL DATA: Measurements width: 1100 mm Measurements depth: 1875/2150 mm Measurements height: 1825 mm Machine weight: 1300 kg MAIN DRIVE: Number of spindle: 2 Spindle speed range: 2800 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 808D WORKPIECE: Workpiece drm: 402 mm TOOLS: Max tool diameter: 20 mm

Automatics (Lathes) For Bars Colchester TORNADO T8MS


OVERVIEW: Brand: Colchester Model: TORNADO T8MS Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2007 Production hours: 1112 Location: Latvia Origin country: United Kingdom GENERAL DATA: Measurements width: 1650 mm Measurements depth: 4000 + 1800 mm Measurements height: 1950 mm Machine weight: 5000 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE Fanuc Model: Series 18i-TB MOVEMENT: X-AXIS movement: 240 mm Z-AXIS movement: 540 mm A-AXIS movement: 625 mm TURRET: Number of turrets: 12 MEDIA: Main electronic connection: 415 V / 53 A / 50 Hz / 3 P Chip conveyer: yes ADDITIONAL EQUIPMENT: 1 - Chip conveyer 2 - Bar loader 3 - Tools (upon request)

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

CNC Lathe MONFORTS RNC 500 MultiTurn


Clamping surface diameter: 356mm, turning length: 1000mm, swing over bed/ cross slide: 600/ 425mm, internal draw tube diameter: 86mm, number of tool stations: 12, max. rotational speed: 4000/min.

Lathe INDEX GE 65 NC


Turning diameter: 175mm, turning length: 400mm, number of tool slots: 14, swing: 370mm, control: SIEMENS SINUMERIK, length: 2500mm, width: 2000mm, height: 2000mm.

Turning Machines (Lathes) NAKAMURA-TOME TW-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1997 Production hours: 35200 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: FANUC Model: Series 18-T MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Kamsan Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool

Turning Machines (Lathes) NAKAMURA-TOME W-20 MMY


OVERVIEW: Brand: NAKAMURA-TOME Model: TW-20 MMY Application type: Turning Machine type: Lathe Availability: 01/08/2018 Construction year: 1995 Production hours: 1637 Location: Turkey Origin country: Japan GENERAL DATA: Measurements width: 3645 mm Measurements depth: 2179 mm Measurements height: 2200 mm Machine weight: 6500 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 50-5000 1/min CONTROL UNIT: Brand: NAKAMURA-TOME Model: LUCK-BEI MAIN DRIVE: X-AXIS movement: 195 mm Y-AXIS movement: 40 mm Z-AXIS movement: 265 mm WORKPIECE: Workpiece drm: 51 mm TURRET: Number of turrets: 2 TOOLS: Max tool diameter: 25 mm MEDIA: Main electronic connection: 50 Hz / 3 P Power consumption: 77 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - IEMCA Bar Loader 2 - 1x 0° Live Tool 3 - 1x 90° Live Tool 4 - Loading Robot

Turning Machines (Lathes) DMG MORI NLX 2500/500


OVERVIEW: Brand: DMG MORI Model: NLX 2500/500 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Production hours: 3171 Location: Hungary Origin country: Japan GENERAL DATA: Measurements width: 2200 mm Measurements depth: 1900 mm Measurements height: 1826 mm Machine weight: 4200 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: DMG MORI ERGOLINE Model: CELOS MAIN DRIVE: X-AXIS movement: 260 mm Z-AXIS movement: 500 mm TURRET: Number of turrets: 1 ADDITIONAL EQUIPMENT: 1 - Power transformer 2 - Tool setter

Turning Machines (Lathes) SPINNER TC80077 SMCY


OVERVIEW: Brand: SPINNER Model: TC80077 SMCY Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2008 Production hours: 19461 Location: Hungary Origin country: Germany GENERAL DATA: Measurements width: 4923 mm Measurements depth: 1980 mm Measurements height: 2090 mm Machine weight: 7500 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 840D MAIN DRIVE: X-AXIS movement: 360 mm Z-AXIS movement: 980 mm ADDITIONAL EQUIPMENT: 1 - High pressure external cooler 2 - VDI 40 tool holder 3 - Electrostatic external air filter

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Injection molding machines Krauss Maffei 650-3000-2300 BZ


OVERVIEW: Brand: Krauss Maffei Model: 650-3000-2300 BZ Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1996 Production hours: 23471 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 2800 mm Measurements height: 4600 mm Machine weight: 45000 kg CONTOL UNIT: Brand: Krauss Maffei Model: MC4 INJECTION UNIT: Stroke volume: 1096/2411 cm³ Injection pressure: 1254 bar Screw diameter: 100/70 mm CLAMPING UNIT: Clamping force: 6500 kN Opening stroke: 1750 mm Ejector stroke: 250 mm MEDIA: Main electronic connection: 400 V Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 2x Injection unit 2 - KUKA robot 3 - Turning plate (upon request)

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

Vertikal Turning Machines (Lathes) ?KD BLANSKO SKJ 50-100


Producer ..... CKD BLANSKO - OS Year manufacture/Year overhaul ..... 1993 / 2006 Control system Siemens ..... Sinumerik 840 D Max. diameter of workpiece ..... 10000 mm Clamping diameter of rotary table ..... 4770 mm Max. workpiece height ..... 4240 mm Max. load of table ..... 100 000 kg Machine weight ..... 121000 kg Machine dimensions l x w x h ..... d 15910 x š 10600 mm retrofit 2006 - Siemens 840D CNC system - C axis: conversion for use with boring and milling tools - new drives - new electricity (switchboard, ...) - new central lubrication - CAPTO clamping milling head: 1.000 U/min chip conveyor

Other Turning Machines Mazak Multiplex 6200Y


OVERVIEW: Brand: Mazak Model: Multiplex 6200Y Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2001 Production hours: 6099 Location: Sweden Origin country: Japan CONTROL UNIT: Brand: Mazak Model: Mazatrol 640 T MOVEMENT: X-AXIS movement: 240 mm Y-AXIS movement: 50 mm Z-AXIS movement: 440 mm TURRET: Number of turrets: 12 Max. tool length: 160 mm TOOLS: Max tool diameter: 40 mm Max tool length: 160 mm ADDITIONAL EQUIPMENT: 1 - Bar loader

CNC Turning Centers KNUTH Turnado 280/2000 V


OVERVIEW: Brand: KNUTH Model: Turnado 280/2000 V Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2011 Production hours: 1000 Location: Germany Origin country: Germany CONTROL UNIT: Brand: Knuth Model: Position indicator MOVEMENT: X-AXIS movement: 316 mm Y-AXIS movement: 1928 mm Z-AXIS movement: 130 mm

Traveling column milling machine MECOF CS 88 MT


1995 bi-rotary head control SELCA 1200 Racing: X 6200mm; · Y 1000 mm; Z 1800mm (turning his head 2100 mm) N 2 teams N 2 cubic N 1 divider continuously N 1 head D 'ANDREA from Ø100mm to Ø250 mm N 1 head D 'ANDREA from Ø250mm to Ø700 mm N 50 taper to milling cutters, boring tools and drills N 25 cutters from Ø 40mm to Ø250 mm

CNC Turning Machines MICROCUT BNC-30160X


OVERVIEW: Brand: MICROCUT Model: BNC-30160X Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2011 Production hours: 8241 Location: Estonia Origin country: Taiwan CONTROL UNIT: Brand: FANUC Model: Series Oi-TC MOVEMENT: X-AXIS movement: 4000 mm ADDITIONAL EQUIPMENT: 1 - Chip conveyer 2 - 8x Tool holder

Vertikal Turning Machines (Lathes) TOS-HULIN SKA-12


Carousel Turning Machines (Lathes) RAFAMET KCF 200


Carousel lathe RAFAMET NCC 200 built in 1963. The machine is accurate, suitable for heavy duty. Lathe was made full service. The data characteristic of lathe RAFAMET NCC 200: -turning diameter: 2400 mm (extended from 2250 mm) -height rolling: 1250 mm -slide the slider of a vertical: 1000 mm -engine: 45 kw -dimensions of the machine: 6100 x 5000 x 5500 mm -weight: 50 tons The advantages of the lathe: -New bearings -new oil, cleaned filters-new hydraulic lines -listed lead screw nut -calibration -It has DTR: full technical documentation in Polish language -made was full servicing of the machine

Carousel Turning Machines (Lathes) CONDOR KROMERIZ STANKO 1516


Maximum diameter of folding support: 1600mm Maximum turning diameter by side support: 1600mm Maximum workpiece height: 1000mm Max. workpiece weight at revolutions of the clamping plate 4-125ot / min 6000kg 150-200ot./min. 2400 kg Number of steps for horizontally adjusting the support: 18 Feed rate range for adjustment: 5-1840 m.min Number of slides for slide: 18 Slide displacement range: 0.03-12.5mm / revolution of the clamping plate Number of positions of the turret head: 5

H-Frame Crank Presses PKrR 200/2


Crank press PKrR framework 200/2 pressure 200 tons was built in 1971 by Zamech-. Technical data of the press PKrR 200/2: -nominal pressure: 200 ton-clearance between uprights: 2000 mm-pitch slider: 200 mm-number of jumps: 23, 27, 32 l/min. -distance from the table slider closed (closed is the distance slider from the table in the lower turning position and first engages a): 630 mm-nastwano?? slider: 150 mm-length: 1000 mm-length slider: 900 mm-hole in the table: 1600 x 600 mm-gr ubo??: interface plate 150 mm-width Windows in the rack: 400 mm-the air pressure in the clutch: 3 atn. -odci??aczach air pressure: 5 bar -intake air when jumping individual: 0.035 Nm3/sk. -maximum number of inclusions in the clutch to intermittent traffic: 12 l/min. -main motor power: 22 kW-RPM main motor: 1500 l/min. -engine power to set the slider: 3 kW-engine speed to set the slider: 1500 l/min. -string device, wypych.: 10 t-string device, the power of przytrz: 40 t-string, stroke: 125 mm -maximum air pressure in the device pass design: 6 atn. -the weight of the tool ci?gowego: 2020 kG -the weight of the press without pads: 30580 kG -overall dimensions of the machine (w x l x h): 3100 x 2150 x 5600 mm

CNC Turning Machines MORI SEIKI MT-253/1000


OVERVIEW: Brand: MORI SEIKI Model: MT-253/1000 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2000 Production hours: 64000 Location: Germany Origin country: Japan GENERAL DATA: Measurements width: 5000 mm Measurements depth: 3200 mm Measurements height: 2700 mm Machine weight: 12500 kg MAIN DRIVE: Spindle speed range: 3500 1/min CONTROL UNIT: Brand: MORI SEIKI Model: MSG-501 MAIN DRIVE: X-AXIS movement: 635 mm Y-AXIS movement: 110 mm Z-AXIS movement: 1000 mm WORKPIECE: Workpiece drm: 570 mm MEDIA: Power consumption: 58 kVA Chip conveyer: yes Internal cooling: yes

CNC Turning Machines OERLIKON BOEHRINGER VDF400C-F


OVERVIEW: Brand: OERLIKON BOEHRINGER Model: VDF400C-F Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1985 Production hours: 120000 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 4365 mm Measurements depth: 2685 mm Measurements height: 2795 mm Machine weight: 16000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 3550 1/min MOVEMENT: X-AXIS movement: 1000 mm WORKPIECE: Workpiece drm: 400 mm MEDIA: Main electronic connection: 163 A Chip conveyer: yes Internal cooling: yes

CNC Turning Machines COLCHESTER COMBI K4


CNC lathe COLCHESTER COMBI K4 was built in England in 2001. Technical parameters of CNC lathe COLCHESTER COMBI K4: -CNC control: Fanuc 200i-T -turning diameter: 409 mm -Turning length: 2030 mm

CNC Turning Machines DOOSAN PUMA 240 MB CNC


CNC lathe DOOSAN PUMA 240 MB produced in 2007 year in Korea. The machine is equipped with a FANUC Series 21i-TB. Cnc lathe allows for effective machining, which allows you to save time and gain accuracy. CNC lathe-specific data DOOSAN PUMA 240 MB: -number of tools: 12 PCs. -the number of driven tools: 2 PCs. -spindle: 65 mm -stroke x axis: 205 mm -stroke y axis: 580 mm -diameter of the handle: 225 mm -rated power: 28.95 kVA -weight: 4140 kg -hydraulic Chuck -horse -four-bed

Carousel Turning Machines (Lathes) DEFUM KNA 110/135B


Carousel lathe DEFUM KNA 110/135B was produced in 1984 in Poland by DFO DEFUM.

CNC Turning Centers MIYANO BND-34T2


BAR CAPACITY 42 MM - 8 POSITION IN MAIN TURRET(4 ARE DRIVEN) - 6 POSITION IN SUB TURRET - FANUC 0-T CONTROL - LNS MINISPRINT BARFEED NEW IN 1996 - TOOLING - MANUALS.

Famar Pronto 6 Vertical Lathe Famar Pronto 6


2008 powered Standard Chuck diameter [mm] 260 Maximum Chuck diameter [mm] 260 Rated turning diameter [mm] 180 Maximum working diameter [mm] 250 maximum turning diameter [mm] 350 maximum working length [mm] 200 Spindle Nose [ASA] 6 Front bearing Ø [mm] 110 Power [kW] 23.6 Rated torque [Nm] 146 Max. [Nm] 196 Max. [Rpm] 5300 type of tool [VDI] 40 Tools [No.] 12 Max. [KW] 12.5 Max. [Nm] 88 Max. [Rpm] 8000/10000 Maximum tool length [mm] 250 Tool change time [sec] 0.25 in excellent condition Machine available from July 2018

Carousel Turning Machines (Lathes) Stanko 1525


in working condiiton

Filling Line KHS 50 000 bph and returnable KHS GmbH Glass bottles 0.33 and 0.5 ltr


Filling Line KHS 50 000 bph new and returnable bottles glass bottles This line is made by KHS in year 2005 and it was in operation till July 2013. It still installed, fully operational and is suitable for filling 0.3 – 0.5 liter glass bottles with beer and soft drinks, capacity upto 50 000 bph in 0.5 liter bottles. This line has also a bottle washer but not crate handling Main Characteristics • Capacity 50 000 bph at 0.5 liter bottles • Made by KHS in year 2005, in operation till 2013, still installed • For both new and returnable glass bottles, operated for 0.5 liter bottles only • Secondary packaging Kisters shrink tray packer and KHS palletizer • Operation controls made with Siemens Simatic S7 PLC system • Complete line in fair condition and immediately available for relocation List of main equipment 1. Bottle Depalletizer KHS Innopal 2. Bottle Washing Machine KHS Innoclean – compact design a. Capacity 55000 bph b. Double ended c. Two washing sections and a rinsing section 3. Empty Bottle Inspector OMNIVISION II by Filtec year 2008 4. Filling Block KHS Innofil DMG VVF/SVF, year 2005 a. Rinser with 112 heads b. Filler with 120 filling heads c. 18 capping stations for crown cork d. Hot water injection for beer foam creating before closing e. Automatic outside washing system f. Comes with 2 sets of spare parts for each (two) bottle format g. Crown cork feeding system by MSN Magnettechnik (with magnet conveyor) 5. Level Inspection System KHS Metec Promecon 4000 with two measuring bridges (x-ray) 6. Flash Pasteurizer KHS Innopro KZE a. with 11 m3 buffer tank, diameter 2.0 m, insulated 7. Air Dryer ACI one section approx. 2 meters 8. Labeling Machine KHS Innoket KL 2080, year 2005 a. Type KL 2080-40/120-48 PM P1 b. With two labeling stations for 3 labels – front, back, neck c. How glue system d. Inbult Date printer Lasetec (laser) e. Data printer Videojet inkjet printer Excel 170 i 9. Label Inspector KHS Metec Promecon 3000 with measuring bridge (x-ray) 10. Kisters TSP 050 B Secondary Packaging Machine, year 2005 a. For tray, film and colored film b. Packaging configurations 5 x 4 (6 x 4) 11. Transport system with two lines after secondary packaging for correct palletizer feeding with package turning unit 12. Palletizer KHS Innopal PN 1 N (H) 2 13. Pallet stretch wrapping machine Robopak 14. Pallet conveyor to warehouse

CNC Lathe GILDEMEISTER NEF CT40


Turning diameter: 400mm, turning length: 600mm, swing over sledge: 225mm, center height: 260mm, spindle bore: 68mm, max. chuck diameter: 200mm, rotational speed: 20-4000/min, quill stroke: 100mm, length: 3500mm, width: 1700mm, height: 1700mm, weight: 3.5t.

CNC Turning Centers HYUNDAI KIA SKT 400 LC


Turning Center HYUNDAI KIA TCS 400 LC was manufactured in 2008. Technical data: -CNC control: Fanuc Series 21i-TB -max. length: 2200 mm -max. diameter: 630 mm -max. workpiece diameter rod: fi 117 mm -max. the weight of the item in the holder: 500 kg -max. the weight of the item in the horse: 1500 kg -ground clearance over the bed: fi 725 mm -the clearance between the spindle and the tool head: 150-2350 mm -travels in axis X with: 320x2200 mm -X axis motor power: 7 kW -axis motor power: 7 kW -power supply: 40 kVA -compressed air: 5.5 bar -dimensions (l x w x h): 5440x2165x2227 mm -weight: 10850 kg

Carousel Turning Machines (Lathes) TOS SKJ 12 NC


Control system: NS361 Maximum workpiece height: 1150 mm Max workpiece diameter: 1400 mm clamping diameter: 1,250 mm Engine power: 40 kW Max. Workpiece weight: 6000 kg Machine dimensions: 2970x2770x4250 mm Machine weight: 13000 kg

Milling machine centers Mikron UME 600 TNC 360/4xx CNC


x-travel 600 mm y-travel 600 mm z-travel 500 mm Control TNC 426 Heidenhain Main spindle: turning speed range - main spindle 5 - 6300 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 800 Nm tool taper SK 40 swiveling-rotary-table: table diameter 630 mm Bapw07ib0n center hole 30 H7 mm rotatable 360 ° swivellable -20 / +45 ° Tool-Presetter: number of toolpositions 2x 22 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm feeds: rapid traverse ( X / Y / Z ) 15 / 15 / 12 m/min feed speeds max. 15.000 mm/min feed power max. 13 kN total power requirement 24,5 kW weight of the machine ca. 6,4 t dimensions of the machine ca. 6,0 x 3,0 x 2,1 m

Vertical turning lathe SEDIN 1516F1 (D1600x1000)


Turning diameter: 1600 mm Table diameter: 1400 mm Max work-piece height: 1000 mm Max table loading: 8000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg

Vertical turning lathe SEDIN 1525 F1


Max. work piece diameter, mm 2500 Table diameter, mm 2240 Max. work piece height, mm 1600 Max. work piece weight, kg 16000 Table speed range, rpm 1,6...80 Quantity of supports: 2 Movement of vertical support, mm: - vertical 1200 - horizontal 1390 Movement speed of vertical support, mm/min 5...1800 Max. swivel angle of support's slider, degrees 30 Main motor power, kW 45 Machine dimensions, mm 5065 x 5340 x 4190 Machine weight, kg 35500

Vertical Lathe Double spindle COMEC THOR


CNC Fanuc Max. rotating 380 mm Max. turning length 250 mm Max. turning length 200 mm Spindle distance mm 500 Spindle nose ASA 6 " Chuck diameter 250 mm 100 mm diameter front bearing Spindle speed 4000 mm Spindle motor power kW 9/11 VDI30 Tower - 8 stations 1998

CNC Long Turning Machines NILES 7000 CNC


Height of centres mm 500 Distance between centres mm 7400 Swing over bed mm 1000 Swing over cross slide mm 700 Swing in gap mm 1100 Effective lenght in gap mm 500 Wide of bed mm 740 Spindle nose 11" Spindle speed: 560RPM Spindle bore mm 87 N.2 Plataform diam. mm 1000 Weight Kg.19000 CNC MITSUBISHI 700 M70 N.2 Self centering chuck diam.600 N.1 Self centering chuck diam.420 N.1 Plateau diam.1000 N.1 flange diam.600 N.2 Steady rests diam. 600 N.2 Steady rests diam.370 N.2 Open rests diam.280 N.1 Roller bezel Coolant system with tank

CNC Turning Centers Gildemeister CTX320 V6


CNC Lathe Gildemeister CTX320 V6 BJ 2004 750mm

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

Vertikal Turning Machines (Lathes) Sedin TKV 525


Make: Sedin Model: TKV 525 Year: 2014 Condition: Used Machine type: Mill Location of machine: Poland Control: CNC Siemens Sinumeric Service details: Full History Documentation / manuals included? Yes Is tooling / spares included? Yes Is the equipment viewable under power? Yes Machine Details CNC Double Column Vertical Lathe GORBREX model TKV525 ( built on the corp of SEDIN Lathe ) Manufacturer: GORBREX – Poland Model: TKV525 New in: January 01/2014 Condition : very good, under power Control: SIEMENS Sienumeric 840D Delivery time: immediately This VTL was built by our company in 2014 for our customers. At that moment he lost his job for this machine. That is why he wants to sell this machine. The machine was increased by the execution of cast iron carried out. Technical details : Table diameter: 2250 mm Distance between table and ram 0 - 1780 mm Distance between table and lower surface of transversal beam 400 - 2140 mm Workpiece : Max workpiece diameter 2500 mm Max workpiece high 2200 mm !!!! Max workpiece weight 16 000 kg Carriage : Max ram travel 1200 mm Max horizontal travel of carriage 1390 mm Max swivel angle manual +/-30 degrees Max distance between axis of ram 560 mm Max knife intersection 40 x 60 mm Seat diameter ( metric cone ) 80 mm Mechanical unit : Carriages number and type 2 vertical – ram (one is cnc controlled, second is conventional) Table speeds range 0-110 rpm Rapid feeds of carriage 10 - 1780 mm/min Transversal beam feeding 360 mm/min Motors and overall dimensions: Main motor 55 kW , Dimensions 5065 x 5480 x 4910 mm Machine weight 36 000 kg Collect-Deliver-Install Remove the stress & worry of collecting, installing and maintaining your machine. Not just a collection service, features can include... Decommission (pre-owned) Load & deliver to buyer's site Unload and site to install position Fully commission machine 1, 2 or 3 year parts and labour warranty (new) Full PUWER assessment 24 or 48 hour on site response Annual maintenance services Banked hours for all your CNC equipment

Turning Machines (Lathes) Cazeneuve HB575


Auction name: Metal and woodworking machines in Giessenburg Online auction Start of auction: 09 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 29 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

PLOESTI 1200 x 6000


Lathe PLOESTI Manufacturer: ROMANIA Year of Manufacture: 1985 Swing over bed 1200mm Turning lenght 6 000mm

Turning Machines (Lathes) Weiss WM330Ax1000


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...

Turning Machines (Lathes) Sieg SC-10


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...

Turning Machines (Lathes) Sieg SC8-PRO


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...

Turning Machines (Lathes) Hembrug DR1


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...

Turning Machines (Lathes) Schaublin 102-VM


Auction name: Metalworking machines and workshop inventory in Mierlo and Bergeijk Online auction Start of auction: 04 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 22 May 2018 16:15 GMT +0200 (Western Europe (DST) The price list ...
Find used machinery dealers in your country