We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,106 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Control: OSP-P200L Max. turning diameter 1000 mm Table diameter Ø 800 mm Displacement Horizontal 900 mm Tool turret 12 places Equipment: -Conveyor - Lots of tools -Water tank -Pedestal
used
Key data: 230 mm, 550 mm
CNC lathe Mori Seiki SL 25 A 500 - Built in 1990 - 1st hand and from your own use - Fully functional, energized, ready for demonstration - X-axis travel: 160 mm - Z-axis travel: 590 mm - Turning diameter over bed: Ø520 mm - Diameter over cross slide: Ø350 mm - Center spacing: 625 mm - Machining diameter: Ø230 mm - Max. machining length: 550 mm - Number of tool positions: 12 - Main spindle motor: 15/11 kW - Control: Fanuc Series O-T - Dimensions: 2860x1520x1750 mm – 4200 kg
used
Key data: 300 mm, 450 mm, 3800 1/min
Control OKUMA ... OSP-P300LA-e Turning diameter... 300mm Rotation length ... 450mm Inclined bed Spindle bore ... 68mm Tool changer... 12 Driven tools... 6 Bar feeder Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight ... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Spindle speed ... 38-3800 rpm. The machine is in good condition, possible to test under electricity.
used
Description: Individual dimensions:700 x 300 x 2000 , Contents: Top jaws hardened and for turning , weight approx.: 350 kg, Approx. Onsite Dimension. (l x w x h): 700 x 600 x 2,000 mm
used
Machine description - (Partial excerpt, further details on request):, - 6 motor spindles 5.5 kW max. speed 8,000 rpm., - Spindle capacity 16mm, Z 50mm stroke;, - 6 carriages X 40mm stroke, - 1 slide for counter operation, 75mm stroke., - Counter spindle with integrated motor 6 kW, - Max. speed 8,000 rpm, 150mm stroke,, - Rotating ejector with HP flushing, - Fanuc 30i numerical control, - Parts disposal and pneumatic, - Slide plastic coated, - Outer distribution belt greater capacity, - Active bar advance device, - Collets type F16 for active, - Bar preferential device, - Various Tension and reduction tubes, - Turning tool holder base (16x16), - Cross drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Front drilling unit ratio 2:1, - Max. 8,000 rpm. - max. 4.4 Nm, - Electrical control cabinet, - Oil container 1,100 liters, - Coolant pump 100 l/min., 4 bar, - Paper filter system 5 ...
used
Control TX8i Max. rod diameter 65 mm Turning length 450 mm Spindle speeds 5,600 min-1 Main and counter spindle 2 x 10-speed turret with attached revolver Competition. 2 x C-axis Workpiece discharge device with conveyor belt Conveyor Coolant cleaning system HAINBUCH Tension Top LNS Short Bar Loading Magazine Quick Load Servo 3 Various tool holders (fixed and driven)
used
Turning table, 180 Locking table, rotary table with aluminium plate Positioning table, rotary table, round dividing table 180 Turntable: 1080 mm Height to top edge Turntable: 630 mm - Turntable made of 25.5 mm thick aluminium plate with various holes - Very stable bearing turntable, rotatable by hand- 2 index locking positions 180, manual via foot lever for unlocking - stop damper under the turntable for the locking positions - very stable steel substructure - Flange plate steel substructure L x W x H = 600 x 600 x 20 mm Space requirement x H: 1080 x 630 mm Weight: 210 kg good condition 2 pieces available, price per piece; used
used
Key data: 20 mm, 200 mm
Control Fanuc ... 0i - TD Turning diameter ... 20mm Rotation length ... 200mm Spindle speed ... 0-10000/min. Main engine power ... 3.7kW L x W x H ... 1900x1060x1750mm Machine weight... 1700kg 7 axes incl. counter spindle with 9,000 rpm bar feeder LNS Hydrobar Expres 332 The machine is in good condition, possible to test under electricity.
used
Technische Daten Technical Data Turning Diameter 140/260 mm Centre Distance 400 mm Speed Spindle / Spindle Speed 125-2800 rpm If you are interested in this machine, please contact us, we will be happy to send you a detailed offer If you are interested in this machine, please contact us and we will be pleased to send you a detailed offer
used
Description: Additional information: Various turning and milling accessories from D'Andrea consisting of a case with contents + various accessories. Suitcase: - boring bar (B3.06 / B3.08 / B03.11 / B3.16 / B3.22 / P25.63), - Plate holder / tool clamping screws various accessories: - Tool holder TR 200 - Accessories for tool holders (PS33.32 TRE 80 / PS33.28 TRE 80) - Plate holder (SFCC 50 / SSCC 63 / SSCC 80 / SSCC 90) - Counterweight CW 200 - TS roughing heads (TS 25/25 / TS 32/32) + insert holder - Tool clamping screws D'ANDREA S.p.A. is an Italian company that is a world leader in the Manufacture of high-precision accessories for machine tools. It was 1951 founded by MarinoD’Andrea, who began his activity with the introduction of the first facing and drilling head (TA). The D'Andrea brand is international recognized brand, which is represented by a distribution network present in ov ...
used
Key data: 390 mm, 800 mm
For sale: Daewoo Puma CNC turning center type TT2500SY with a Fanuc 18iTB controller. This is a CNC lathe with 2 spindles with a full C-axis, 2 turrets (BMT-65) with 12 positions (with intermediate positions) and a Y-axis on the top turret. All (driven) tool holders, including 2 driven holders in the angle, as well as a complete set of collets etc. are included with the machine. The machine also includes a 250 mm chuck for the main spindle.
used
This Nexturn SA 45X Swiss Type Turning machine was made in the year 2009 and has 24238 hours, of which 10267 are cutting hours. It is equipped with a Fanuc Series 18i-TB control unit and has 6 linear axes. The machine has a spindle speed of 6000 rpm. It includes a Barfeeder Iemca Boss 545.
used
This CITIZEN Cincom K16 VII Swiss Type Turning machine was manufactured in 2006 in Germany. It is equipped with a FANUC control unit. The machine has a spindle speed of 15000 rpm. It comes with a IEMCA GENIUS 118 37 LL bar loader. Check image and video gallery for more details.
used
This STAR SV-12 Swiss Type Turning was manufactured in 2006 in Japan. It is built for precision and efficiency in small part machining. With a maximum bar diameter of 12 mm and a maximum workpiece length of 205 mm, this machine offers exceptional versatility for intricate components. Controlled by the renowned FANUC 16i system, it ensures seamless operation and precise control over every aspect of the machining process. Equipped with 8 axes (X / Y / Z1 / A/ B / E / Z2) for enhanced machining capabilities, the STAR SV-12 enables complex geometries and precise contouring. With a spindle speed of 12000 rpm, this machine delivers high-speed machining performance.
used
This TORNOS Swiss DT 13 Swiss Type Turning was manufactured in the year 2016 and has 15476 production hours. It is equipped with a Fanuc 31i-B control unit. Disposes of a Kraeft & Bauer fire extinguishing system in all fully CNC axes. It is included with all existing machining units and accessories. The machine is under power and immediately available.
used
This Star SB12 RG Swiss Type Turning was made in 2021 in Japan. It is equipped with a Fanuc Series Oi-TF control unit and has 7 axis. The machine has a spindle speed of 15000 rpm. In total it operated 6620h switch-on hours and 2393h feed hours.
used
This Tornos-Bechler DECO 2000/13 Swiss Type Turning from Switzerland was manufactured in 2000, is operated through a Fanuc PNC-DECO control unit. This machine incorporates a spindle speed up to 10000 rpm. It includes a loader for bars of 4 mm up to 26 mm diameter. It presents perfect conditions.
used
This MORI-SAY 620 AC Swiss Type Turning machine was manufactured in 2021 in Czech Republic. It is in top condition with only 1996 hours. Equipped with 6 spindles it comes with a spindle speed range of 500-6000 rpm and a maximum length of bar of 3300 mm. See technical benefits below for more technical details.
used
Control Siemens ... Sinumerik 840 D Turning diameter ... 400mm Rotation length ... 600mm Inclined bed Axis Y ... 64mmmm Counter spindle Spindle bore ... 51mm Driven Tools Bar feeder Machine weight... 3700kg Number of spindle deer ... 0-6000/min. Axis X ... 160mm The machine is in good condition, possible to test under electricity.
used
- Circulation diameter over bed: 430 mm - Workpiece weight: max. 30 kg - Circulation diameter over face slide: 210 mm - Center width: 700 mm - Turning length: max. 510 mm - Speed range: 6,300 rpm - Collet chuck: for 173 E collets - Spindle clearance: 45 mm - Chuck diameter max.: 160 mm - Revolver: 12-speed - Driven tools: no - Tailstock: yes - Control: Siemens 810 D - Parts catcher: yes - Chip conveyor: no - Total power: 17 kW - Machine weight: 2,600 kg - Space requirements (W x D x H): 2.7 x 2.0 x 2.0 m - Condition: very good - Duty cycle: 24602 h Accessories Documentation
used
Type tandem with 2 workrooms Control: SIEMENS Sinumerik max. turning Ø: 200 mm Travels: X= 520, Z= 200 mm Revolver with 14 stations Conveyor
used
with CNC cycle control, Fabr. SIEMENS, type: SINUMERIK 840D, power consumption: 18.5 kW, chuck processing: diameter: 450 mm, max. turning length: 2000 mm, up to 3000 rpm, NOTE: Overhaul of the machine in 2021
used
CNC Lathe YANG type SML-20 Year of construction: 1999 Travel X: 520 mm Numerical Command FANUC Serial OTD Maxi diameter in brocken bed: Ø 480 mm Maxi turning diameter: 200 mm x length 508 mm Spindle diameter: Ø 42 mm Rotation: 4500 RPM Tailstock CM4 Turret 8 tools Equipped with 1 Bar Feeder type DH 65 Weight: approx 2,5 T
used
with CNC control, Fabr. SIEMENS, type: 840D, max. turning length: 400 mm, clearance: 52 mm, chuck diameter: 225 mm, up to 5000 rpm, power: 19 kW, tool turret with 12 tool positions and driven tools, bar loading magazine, Fabr. SPINNER, Type: SERVO-LOAD 80/1200 & Chip Conveyor
used
Control Siemens ... Sinumerik 840 D Turning diameter ... 365mm Rotation length ... 450mm Inclined bed Spindle bore ... 52mm Tool turret ... 12/6 Spindle speed ... 0-6000/min. Main engine power ... 12/16kW Axis C ... 360° Max. rod diameter ... 60mm L x W x H ... 4000 x 1640 x 1730mm Machine weight ... 3500kg The machine is in good condition, possible to test under electricity.
new
Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 1950 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.
used
Control Siemens ... Sinumerik 840 D Turning diameter... 270mm Rotation length ... 535mm Inclined bed Spindle bore ... 50mm Turret Spindle speed ... 1-5000 rpm. Machine weight ... 4800kg L x W x H... 2515x1700x2125mm Max.rod diameter... 50mm Circumferential diameter over bed... 540mm The machine is in good condition, possible to test under electricity.
used
Polyketting s/s mobile turning table, type: DT, number: 961756, year of construction: 1996, dimensions: 1230 mm x 1230 mm x 800 mm.
used
Berthiez BM 225 sermi-automatic machine Variable speed control for the chuck Variable speed control for the feed Max stroke of ram: 1000 mm Turret can incline 45° amp; 30° Max workpiece diameter: 4500 mm Max workpiece diameter with turning to centre: 4000 mm Max height of workpiece: 2650 mm Max weight of workpiece: 30 ton 69 kW on chuck Weight of machine: 40 ton Chuck dia.: 2257 mm Max turningdia -- passage: 4500 mm Power on the spindle: 69 kW Max longitudinal travel X-axis: 2450 mm Max hight of workpiece Z-axis: 2650 mm Command: Bosch semi-automatic Number of speeds: 0,8 > 125 rpm Weight: 40 ton
new
Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 950 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.
new
Servo-conventional lathe The Servoturn series of universal lathes combines state-of-the-art feed technology with classic mechanical engineering. In contrast to conventional lathes, this series has ball screws and electronic handwheels in all axes. High-torque servo motors implement every feed movement with the dynamics of modern CNC machines. Without interchangeable wheels and gears, feed and thread pitches can be selected electronically. Rapid traverses in all axes reduce non-productive times and electronic stops offer high repeatability. - Center width 1450 mm - Turning diameter over bed 500 mm - Circulating Ø over support 300 mm - Servo feed system - Ball screws in all axes - Electronic handwheels - Position display with V-constant function - Quick-change steel bracket If you are interested, we will be happy to send you our complete data sheet.
used
Key data: 375 mm, 45 1/min
Article number: 04-02-099 Manufacturer: Leadwell Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: 1991 L x W x H: approx. 2500x1420x1740 Weight: approx. 3000kg Max. turning diameter: approx. Ø375mm X-axis travel: approx. 115mm Z-axis travel: approx. 350mm Spindle bore: approx. 40mm Tool turret: 12 stations Speed: approx. 45-4500 rpm Tailstock: MK3 Control: Fanuc O-T Accessories Collet device 3 jaw chucks Various holders Various tools Machine feet Tool Measurement System Other accessories on request Price and other technical data on request
used
Key data: 300 mm, 450 mm
Control OKUMA ... OSP-P300LA-e Turning diameter ... 300mm Rotation length... 450mm Inclined bed Spindle bore ... 68mm Driven tools 12 Axis X ... 235mm Axis Z ... 520mm Axis C ... 360° Machine weight... 5000kg L x W x H ... 2545x1870x1791mm Main engine power ... 11/15kW Bar feeder Spindle speed ... 38-3800 rpm The machine is in good condition, possible to test under electricity.
used
Key data: 490 mm, 1000 mm
Control Sinumerik 810 D Circulation diameter over bed 490 mm Circulation diameter over face carriage 280 mm Turning length 1,000 mm Spindle bore 93 mm Speed ranges 1-625 / 1-3,000 rpm Drive power 16 kW Dimensions approx. 3.0 m / 1.8 m / 2.0 m Machine weight 3.6 t Tailstock stroke 180 mm
used
Description: Max cutting diameter: 386mm Max cutting length: 515mm Bar capacity: 52mm XYZ: 260 x 100 x 590mm Main spindle: 6000 rpm/7.5/11kw Milling: 10,000 rpm 12 turrets Milling holders Turning blocks Gantry Loader GX-05 AIV type Chip conveyor Includes shipping to any major seaport in the world. control: Mitsubishi M730UM with CELOS, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,100 x 2,200 mm, weight approx.: 5,400 kg
used
Description: Max cutting diameter: 386mm Max cutting length: 515mm Bar capacity: 52mm Main spindle: 6000 rpm/7.5/11kw Milling: 10,000 rpm 12 turrets Milling holders Turning blocks Gantry Loader GX-05 AIV type Chip conveyor Includes shipping to any major seaport in the world. control: Mitsubishi M730UM with CELOS, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,100 x 2,200 mm, weight approx.: 5,400 kg
used
Description: Turning tool set Thickness 16 x 16 mm Number 4 steels Weight 3 kg Dimensions L x W x H 300m x 200 x 50 mm Approx. Onsite Dimension. (l x w x h): 300 x 200 x 50 mm, weight approx.: 3 kg
used
Description: Additional information: Various turning and milling accessories from D'Andrea consisting of various accessories - Basic recording DIN69871-AD+B50 MHD’80.180 (Code 416800105025) = 2 pieces - Basic recording DIN69871-A50 MHD’80.62 (Code 416800105020) = 1 piece - Basic recording DIN69871-AD+B50 MHD’63.150 (Code 416630105028) = 2 pieces - Basic recording DIN69871-AD+B50 MHD’50.120 (Code 416500105028) = 1 piece - Basic recording DIN69871-A50 MHD’63.56 (Code 416630105020) = 1 piece - Basic holder DIN69871-A50 MHD’50.48 (Code 416500105020) = 4 pieces - Roughing machining head, TS 80/80 (Code 455408001400) = 1 piece - Roughing machining head, TS 63/63 (Code 455406301250) = 1 piece - Roughing machining head, TS 50/50 (Code 455305001000) = 1 piece - Centesimal machining head, TRC 80 (code 455018001201) = 1 piece - Extension, PR 80.80 (code 656908000800) = 1 piece - Extensi ...
used
Gildemeister CTX 410 Year of construction: 2004 Controls: Heidenhain CNC lathe Travel: x-travel 250 mm z-travel 635 mm Max. turning length: 600 mm Circulation diameter over bed: 505 mm Circulation diameter over face slide: 365 mm Spindle bore: 87 mm Max. chuck diameter: 250 mm Max. torque: 320 Nm Max. tailstock displacement by hand/self-acting: 580 mm Tailstock mount/stroke: MK4/580 mm Area requirement (LxWxH): 6.5 m x 4.0 m x 1.8 m Weight: 4500 kg
used
We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never used productively., - Control Options, - Options package, - High pressure coolant flow, - Accessory package
used
Mazak Quick Turn Nexus 100 Year of construction: 2004 Control: Mazatrol Fusion 640T CNC lathe X-axis: 185 mm Z-axis: 360 mm Max turning diameter 280 mm Max. rotation length 305 Spindle clearance 41 mm Three-jaw chuck B208 12 tool slots 12 x Powered Tools C-axis Conveyor Parts catcher High Pressure Pump No tailstock
used
turning diameter:180 mm swing diameter:340 mm total power requirement:65 kW weight of the machine ca.:120 t dimensions of the machine ca.:4,2 x 1,6 x 3,0 m max. workpiece weight:20 kg max. X-axis travel:450 mm max. Z-axis travel:300 mm chucking diameter:210 mm spindle distance:750 mm spindle bore:52 mm worktool system:10-fach VDI40 worktool system:8-fach Capto C5 (optional) 2-spindle
used
swing diameter:400 mm control:840 D SIEMENS turning speeds:3500 1/min z-axis:340 mm x-axis:1350 mm workpiece height:400 mm Torque:820 turret head:12 Pos. rapid traverse:Z 30 / X 60 m/min tool holder:VDI 50 spindle head:A8 DIN 55026 spindle motor:60 kW weight of the machine ca.:14,8 t dimensions of the machine ca.:6 x 3,3 x 3,4 m live tools, C-axis, workpiece storage left side, high pressure pump, chipconveyor,
used
Article: Vertical turning and grinding centre Manufacturer: EMAG Type: VSC 250 DS Yob: 2008 Control: SIEMENS 840D Grinding spindle speed: 30,000 rpm Rotation spindle speed: 3,000 rpm Tool places turret: 12 Cooler for spindle and machine bed cooling Cooling lubricant - lifting station (no independent cooling lubricant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, this can be overhauled in a spindle factory. Otherwise the machine is in a very good condition and fully functional. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com
used
Technical data: 1-drive unit / 1-loose unit 2012 overtaken max. load: 10 to Container diameter: 1000-5000 mm Roll diameter: 540 mm Roll width: 600 mm
used
Volume: 1000 ltr. Material: mild steel
used
1-impulse unity 125to ./1 Loose unity 125to.
used
Technical data: working surface: 2500 x 3000 mm Table load: 30 to. The mounting pad height: 240 mm Number of T-slots: 10 Rotation speed: 0.008 ? 0.45/rpm Power: 7,5 kW
used
Technical data: Capacities: Height of centres over the flat way: 625 mm Height of centres over the flat floor: 1225 mm Swing over bed: 1250 mm Swing over carriage: 940 mm Diameter of four-jaw chuck: 1250 mm Only range of the chuck min/max: 230/1050 mm Distance between centres: 5000 mm Headstock: Spindle bore: 105 mm Spindle seat: cyl. 105 Diameter of the spindle in the front bearing: 320 mm Number of spindle speeds: 24 Overall range of spindle speeds: 1.6-315 rpm Spindle drive motor rating: 75 kW Maximum torque of the spindle: 63000 NM Carriage: Of the bed width: 1100 mm Length of the saddle: 1320 mm Of the cross slide width: 550 mm Travel of cross slide: 800 mm Travel of tool slide: 600 mm Number of feed Council for each range: 20 Overall range of longitudinal feed Council: 0.18-160 mm / rev Range of longitudinal feed Council at: -high range of spindle speeds: ...
used
Tip height 300 mm Top width 2000 mm Spindle speeds 16-1120 U/min Dimensions L/W/H 3750/1100/1400 mm Weight approx. 2500 kg