turning center used for sale

Including 150 matching turntables WNMG080412/ unused and in original packaging Auction-ID: A1-49785-25

4 pieces internally, 4 pieces externally, 8 pieces externally with direct cooling; For ISO turntables Auction-ID: A1-49785-179

Including CNMG12/ DNMG15 Auction-ID: A1-49785-26

In 2 cardboard boxes Auction-ID: A1-49785-314

For ISO turntables; shaft 8/ 10/ 12/ 16 mm; unused and in original packaging Auction-ID: A1-49785-190

Shaft 40 mm; Includes 30 matching Sandvik CNM1906 insert Auction-ID: A1-49785-238

For ISO turntables/ shank 20 to 40 mm/ total 15 pieces; unused and in original packaging Auction-ID: A1-49785-257

Inside and outside; unused and in original packaging Auction-ID: A1-49785-139

For insert CCMT06; 6 pieces S0608; 6 pieces S10; 6 pieces S12; unused and in original packaging Auction-ID: A1-49785-224

Parallel Lathe CAZENEUVE HB 500 Between points: 1000 mm Maxi Ø on bench: Ø 500 mm Maxi Ø over saddle: Ø 190 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 1600 RPM Turret: MULTIFIX type B 3-jaws chuck Ø 215 mm Threadings: Metric + Whitworth Tailstock: CM5 Scale: 2 axes NEWALL Recent electrical panel Supplied with 1 tool holder + 1 set of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2500 x 1400 x 1600 mm Weight: approx 2 T

turning diameter: 900 mm turning length: 1600 mm control: Fanuc 21iTB swing dia.: 1030 mm swing diameter over cross slide guide: 800 mm x-travel: 470 mm z-axis: 1650 mm spindle motor: 37/45 kW spindle turning speed range: 0 - 1800 U/min transmission ratio: 3 max. torque on the spindle: 5423 Nm Turret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm chucking diameter: 530 mm total power requirement: 68,6 kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,8 x 2,8 x 2,6 m - CNC Control Fanuc 21i-TB - LNS - C-axis 360° (0,001°) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 150 mm y-travel: +/- 30 mm z-travel: 620 mm chucking diameter: 165 mm Main Spindle:: spindle speed:: 6000 U/min spindle motor: 11 / 7,5 kW 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW Turret: 3x 15 Stck c-axis: 0,0001 ° y-axis: +/- 25 mm Control: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/min total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4120×2130×2815 m Horizontal lathe with main and counter spindles - Muratec Fanuc 32i-TB CNC control - Main and counter spindles -- 2x C-axis - Tool turret (3x) with Y-axis, -- 15 stations each (BMT 44) -- Powered tools on all stations, 8 kW, 6,000 rpm - Finished part gripper - Conveyor belt - Bar feeder interface - Coolant system, separate 200-litre tank - Cooling unit - High pressure to turrets 1–3 via M-function: 15 bar/40 l/min - Chip conveyor - T ...

faceplate diameter: 4500 mm swing diameter: 6000 mm turning height: 3500 mm Control: Siemens 840D distance between columns: 6500 mm column: max. travel: 19000 mm table load: 63 tons table rotation speed: 0,63 - 63 U/min cross-rail support horizontal: 7500 m/min cross-rail support vertical: 2500 m/min clamping table: 8000 x 5000 x 350 mm table load capacity: 25.000 kg/qm ram head dimension: 460 x 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m GANTRY – Double-column milling and turning centre with movable column Retrofitted and modernised in 2009 - Siemens 840D CNC control - Drilling and milling unit, speeds 25 – 2,500 rpm - Workpiece table 8,000 x 5,000 mm - Rotary table/face plate 4,500 mm - Angular milling head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5000 mm swing diameter: 5500 mm turning height: 3500 mm max. ram stroke: 1800 mm faceplate turning speed range: 0,5 - 50 U/min workpiece weight: 20 t feed per revolution: 0,056 - 4,25 mm rapid traverse: 2 m/min Control: Sentrol total power requirement: - kW weight of the machine ca.: - t - Sentrol CNC control system - Faceplate - 2 vertical ram supports The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma LB 3000 EX II-MY C 450 Control: OSP-300LA Year of manufacture: 2018 Internal machine no. 77 Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm X-axis travel: 260 mm Y-axis travel: 120 mm Travel Z-axis: 510 mm Travel C-axis: 360 mm Max. turning diameter: 340 mm Max turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Recording: BMT Tool turret: V12 (driven) Equipment: - Chip conveyors - One touch IGF - Touchsetter - Main spindle Kitagawa B210 - Coolant system

Manufacturer: Buffalo Model: MICROCUT SAB LT-52 Year: 2019 Condition: Used Stock number: 6719 Control system: Siemens Maximum turning length: 460 mm Maximum turning diameter: 210 mm Maximum turning diameter over bed: 500 mm Maximum spindle speed: 5000 1/min Maximum turning diameter over support: 220 mm Maximum length of travel in the X-axis: 215 mm Maximum feed in the Z-axis: 520 mm Length: 3330 mm Width: 1821 mm Height: 1930 mm Weight: 3200 kg Equipment: Chuck Chip conveyor Lace

Manufacturer: ČKD Blansko Model: SK 25 A Year: 1960 Condition: Used Stock number: 9539 Max. turning diameter: 2500 mm Clamp plate diameter: 2400 mm Maximum workpiece weight: 14000 kg Max. workpiece height: 1600 mm Weight: 47000 kg

turning diameter: 500 mm swing dia.: 800 mm turning diameter over bed: 450 mm turning length: 800 mm x-travel: 360 mm z-travel: 980 mm spindle turning speed range: 3200 U/min max. torque on the spindle: 235/939 Nm spindle bore: 110 mm turret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kW weight of the machine ca.: 7,6 t dimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m - Machine with C-axis and driven tools - 2 driven tool holders - 10 static tool holders - Incl. SMW 3-jaw chuck 315BB - Measuring arm - Chip conveyor - Incl. additional high-pressure pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: TOS Model: SKIQ 8 Year: 1960 Condition: Used Stock number: 9540 Clamp plate diameter: 800 mm Max. workpiece height: 700 mm Max. workpiece weight: 2500 kg Weight: 16000 kg

The machine is in good technical condition; testing is possible by prior arrangement. Fanuc 0i-TD control system, running time: 5,876 hours.

Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg

turning diameter: 400 mm turning length: 549 mm control: HEIDENHAIN Eltropilot swing over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm main spindle speed: 25 - 5000 U/min main spindle drive: 21 kW max. torque on the spindle: max. 240 Nm : 120 mm c-axis, speed: 100 U/min C-axis: Haltemoment 200 Nm C-axis resolution: < 0,04 ° sub spindle bore: 56 mm sub spindle speed: 25 - 5000 U/min sub spindle drive: 9 kW max. torque on the spindle: max. 72 Nm : 90 mm c-axis, speed: 100 U/min C-axis: Haltemoment 150 Nm C-axis resolution: < 0,04 ° feed power X/Z axis: 3,5 / 7 Nm rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret: 1 x 12 Stationen number of driven tool stations: 12 speed of driven tools: 4.000 U/min total power requirement: 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub  ...

turning diameter: 3200 mm faceplate diameter: 2800 mm turning height: 1600 mm Control: Siemens 840 dsl workpiece weight: max. 16.000 kg Dimensions (L/W/H): 5.500 x 6.450 x 4.900 mm weight - pallet system: 43.000 kg Max. turning diameter: 3,200 mm Table diameter: 2,800 mm Max. turning height: 1,600 mm Max. workpiece weight: 16,000 kg Table speed: 70 rpm Number of table speed ranges: Constant Vertical travel, Z-axis (ram stroke): 1,100 mm Horizontal travel, X-axis: 1,720 mm Working feed range: 2–2,000 mm/min Rapid traverse X/Z: 7 m/min Cross rail travel speed: 360 mm/min Main motor power: 55 kW Total installed power: 69 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: ZPS Model No.: S60/1000 CNC Year: 2001 Condition: Used Stock number: 9546 Control system: Heidenhain Pilot 3190 Maximum turning length: 1000 mm Max. turning diameter: 275 mm Maximum length of travel in the X-axis: 275 mm Maximum feed rate in the Z-axis: 1070 mm

Lathe Boley Theisen

Lathe Dalian CDS6241

Lathe Knuth SH180/1000 G

Consisting of: drills, drill heads, pins, centers, machine vises, Auction-ID: A1-50090-72

turning diameter: 190 mm turning length: 620 mm control: Fanuc 18 iT max. bar diameter through the spindel: 65 mm number of controlled axis: 9 y-axis: +/- 45 mm turning speed range: 4500 U/min power capacity: 15/11 kW rapid speed: m/min swivelling range: +/- 91 ° Grad number of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/min Spindelpower on driven tool: 5,5/3,7 kW tail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: m weight of the machine ca.: 12,5 t CNC- lathe with sub spindle - 2 turrets, universal for main.- or sub- spindle - upper turret switchable - Y- axis on upper turret - both turrets with 12/24 positions - collet chucks on main- and sub spindle - chip conveyor - parts catcher typ A - few toolings The data for this ad was created with ModulMWS - the software solution of Logo ...

turning diameter over bed: 2000 mm turning diameter over slide rest: 1600 mm turning length: 10000 mm control: FANUC 0i TF workpiece weight: 17 t steady: 4 feed: 1 - 3000 mm/min main drive: 60 kW main spindle speeds:: 1,5 - 160 U/min bed width: 1150 mm faceplate: 1600 mm tail stock: tailstock quill diameter: 260 mm total power requirement: - kW weight of the machine ca.: - t the machine is currently being overhauled and equipped with - new electrics (Siemens, Schneider, cabinet) - CNC control FANUC 0i TF - new Fanuc motors - new hydraulic parts - complete mechanical overhaul - Ball screw (B-axis) - bed overhaul - three-track bed - Face plate with 4 jaws - 3 steady rests (2 of the steadies take 500 mm piece, and one of 700 mm) - a set of rolls, for the bigger pieces - incl 1 year warranty from overhauler on electrical and hydraulic components and 2 years on FANUC CNC The data for this  ...

Key data: 26 mm

Control: Traub TX 8i Main spindle max. rod Ø: 26 mm Max. speed: 8,000 rpm Sub-spindle max. rod Ø 26 mm Max. speed: 8,000 rpm Tool system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front apparatus 5-way with Z3 carriage without drive Reverse processing station (5 tools) without drive IEMCA BOSS 432/44 Bar Feeder

The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm. Additional technical specifications: • Swing circle diameter: max. 700 mm • Rapid traverse: 17.5 m/min • Collet chuck: ISO DIN 173E • Tool holder square: 20 x 20 mm • Tool holder round: 20/25 mm • C-axis resolution: 0.1° • tool places: 14 pieces external • Main spindle: 5, internal: 3 + 4 • Driven tool stations: 2 • Simultaneous machining: inside and outside • spindle power: 7,5 kW

With technical documentation and accessories, such as three-jaw chuck, clamping jaws and collets. Additional technical specifications: • Max. swing circle: 360 mm • Collet chuck: ISO DIN 163 E • Tool holder square: 16 x 16 mm • Tool holder Round: 20 mm • Spindle power: 5,5 kW • Tool places in total: 7 pieces - External: 4 / Internal: 3

With documentation and accessories including a two-jaw chuck, diameter: 165 mm, basic tool holders, as well as a collet chuck 173E-42 B. Additional technical specifications: • max. Load: 11,0 kW • Swing diameter over bed: 510 mm • Swing diameter over cross slide: 290 mm • max. turning diameter (recommended): 170 mm • max. turning diameter (technical): 320 mm • travel of X-axis: 400 mm (160 + 15 mm) • travel of Z-axis: 330 [550] mm For further technical data, please refer to the photographed machine specification.

With technical documentation and accessories such as tool holders and a two-jaw as well as a three-jaw chuck, incl. SCHUNK clamping jaws, diameter: 165 mm. Additional technical specifications: • spindle chuck diameter: 169 mm • boring bar diameter: 25 mm • cutting feed X, Z: 0.001 - 500.000 mm/rev

Manufacturer: Star Model No.: ECAS 20T Year: 2008 Condition: Used Stock number: 9553 Control system: Siemens Sinumerik Operating hours: 6000 h Maximum spindle speed: 10000 1/min Max. rod diameter: 20 mm Length: 2588 mm Width: 1150 mm Height: 1765 mm Weight: 3500 kg

Manufacturer: Tornos Model: Deco Sigma 8 Year: 2007 Condition: Used Stock number: 9554 Control system: FANUC Series 32i-MODEL A Operating hours: 15200 h Maximum spindle speed: 15000 1/min Max. rod diameter: 10 mm Length: 1670 mm Width: 870 mm Height: 1650 mm Weight: 1600 kg

Key data: 340 mm, 1000 mm, 3500 1/min

Stock No.: 4021 CNC LATHE Manufacturer: Okuma, Type: LB300MY-1SC 1000 Serial No.: 164, Year of manufacture: 1999 Specifications: Max. circumferential diameter 340 mm dia. Max. turn. About bed 530 mm Dia. Turning length 1000 mm Main spindle speed range 3500 rpm Spindle bore 70 mm dia. C axis - main spindle movement 0.001 X axis movement 260 mm Y axis +70 / -50 Tool turret with 12 stations Driven tools 4000 rpm Control OSP 7000L Operating hours spindle 5898 Accessories:                             Hydraulic Main Center Chuck Kitagawa HoH 12" / 304mm Tool setter                         Chip conveyance.                      Cooling water system.                    Hydraulic tailstock.               Dimensions: Length: - mm, Height: - mm, Width: - mm, Weight ...

SCHAUBLIN 202 TG-CNC W25-0127 ist ein CNC-Dreh-, Fräs- und Schleifzentrum mit hoher Präzision, großer Genauigkeit und zuverlässiger Bauweise. Arbeitsvermögen: Spitzenhöhe 60 mm, Vorschubweg Z 300 mm, X 150 mm, Spannbohrung 19 mm; Lineares Auflösungsvermögen 0,0001 mm, C-Achse 0,0001°. Technische Daten: Spindeldrehzahl bis 7000 t/min, Spindelleistung 5/6 kW, Drehmoment 26,1/35,1 Nm, Eilgang 20 m/min (X/Z), Anschluss 3x 400 V 50 Hz; Gewicht ca. 3000 kg; Abmessungen L1930×B1300×H2040 mm. Ausstattung: Spannzangenaufnahme Typ W25, integrierte C-Achse. Erreicht enge Toleranzen; geeignet für Automotive, Uhrmacherei, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

CITIZEN CINCOM R 04 VI ist ein CNC-Langdrehautomat (Swiss-Typ) mit hoher Präzision, Genauigkeit und Zuverlässigkeit. Kapazität: Ø max 4 mm, Drehlänge 40 mm, Spindeldurchlass 9 mm, Gewinde bis M3. Daten: 6 Achsen, 2 Spindeln, bis 20000 t/min, Spindelleistung 0,5/0,75 kW, 15 Stationen; Drehwerkzeuge 5, Bohrwerkzeuge 4, Querwerkzeuge 2, Schaft 8 mm; Anschluss 3x400 V 50 Hz, Gewicht ~850 kg, Abmessungen 1485×560×1410 mm. Zubehör: LNS TRYTON 107 Hybrid Lademagazin, Teilefänger, Kühlsystem, Ölnebelabsaugung ELBARON, Lampe. Geeignet für enge Toleranzen in Automotive, Uhrenindustrie, Medizintechnik, Luftfahrt. Technische Daten ohne Gewähr

TRAUB TNX 65/42 ist ein CNC Kurzdrehautomat mit fester Spindel, für präzise, hochgenaue und zuverlässige Bearbeitung. Drehlänge 220 mm; Spindeldurchlass 65 mm; Z 300 mm (2 Schlitten), Y 140 mm. Spindel 5000 U/min; Gegenspindel 7000 U/min. 2 Revolver; Werkzeuge 10/8, angetriebene 10/3 (6000 U/min); C 0,001°. Anschluss 50Hz 3×400V; 95 kW (80 kVA). Gewicht ~9000 kg; L5480×B3100×H3200 mm. Geeignet für enge Toleranzen in Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Siemens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 3300 mm turning height: 2200 mm workpiece weight: 15000 kg vertical adjustment of the crossrail: 1600 mm turning speed range - faceplate: 1 - 90 U/min main drive motor: 60 kW ram head swiveling: +/- 35 ° ram head - cross travel: 1200 mm ram head - vertical travel: 720 mm feed range: 1 - 3000 mm/min Control: FANUC 0i-TF total power requirement: ca 70 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 4,8 x 4,8 x 5 m Complete overhaul in 2026 - CNC FANUC 0i-TF - 1 ram on crossbeam - 4 clamping jaws for face plate - CE -- mechanical overhaul of all components (adjustment of the geometrical parameters of the machine according to ISO 3655) -- Grinding of the guides -- New telescopic covers -- FANUC main motor -- new electrics and CNC control -- new Fanuc servomotors -- ball screws dia. 50mm -- new hydraulics The data for this ad w ...

faceplate diameter: 5000 mm swing diameter: 8000 mm turning height: 4000 mm ram head dimension: 360 x 360 mm faceplate turning speed range: 0,6 - 60 U/min workpiece weight: 160 t main drive motor: 2x 70 kW control: FANUC total power requirement: - kW weight of the machine ca.: 85 t dimensions of the machine ca.: -- m The machine will be overhauled and modernised (upon order) and fitted with: - Fanuc CNC control system (latest model) - New electrical system - New hydraulic components: pumps, lubrication systems, hoses, valves, etc. - All assemblies and sub-assemblies will be cleaned, inspected and replaced where necessary. - 2 rams supports on the crossbeam CROSS-RAIL TOOL HEAD (ARM TOOL CARRIAGE) - Axial ram travel (Ram stroke) — 2500 mm - Horizontal carriage travel — 3400 mm - Swivel angle / Tiltability — 15 - 45° - Cross-rail travel (Arm travel) — 3600 mm - Saddle travel —  ...

faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 2060 mm workpiece weight max.: 18000 kg faceplate turning speed range -stepless-: 1,02 - 92 U/min rapid traverse of cross-rail: 2500 mm/min slide adjustment: 2400 mm main drive motor: 60 kW Control: Fanuc 0iTF total power requirement: 75 kW weight of the machine ca.: 62,8 t dimensions of the machine ca.: 6,6 x 5,8 x 5,4 m Overhauled/modernized in 2026 - Complete replace of hydraulic & lubrication installation - New ball screws installed - Replace of electric installation and of command - Mechanical elements retrofitted and grinding of guideways (adjustment of the geometrical parameters of the machine according to ISO 3655) equipped with: - CNC control FANUC 0iTF - FANUC Drives and Motors The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock No.: 4028 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 32D Proline Serial No.: 06-503, Year of manufacture: 2006 Specifications: Size Diameter 32 Main spindle speeds 6000 Main Spindle 5.5 effect Sub-spindle 3.7 kw Gengen Spindle 6000 C Axis Headspindle 5 C acshen sub-spindle 5 X-1 axis                            X2 Ashes                          X3 Ash                          Z1 Ash                           Z2-Acshe                           Z3 Ash                           Y-axis                            Rapid traverse 32 Control system MAIER PRO - FANUC 31iTA Axis Controlled 9 Opreation time 36749 Cutting time 9315 Tool holder 1 5 pc. 16x16 mm - 4 pc. Red. Tool  ...

Stock No.: 4026 CNC LATHE SWISS TYPE Manufacturer: Maier, Type: ML 26D Proline Serial No.: 05 385, Year of manufacture: 2005 Specifications: Size Diameter 26 Ma. Turning length (fixed guide bush) 320 Main spindle speeds 0-8000 Main Spindle 5.5 effect Sub-spindle                        Sub-spindle max dia. 26 C Axis Headspindle 5 Rapid traverse 32 Control Maier Pro - GE Fanuc Axis Controlled 9 Stanglademagazin FMB 3200 - NO. R-826374 – 2010

The machine is in good technical condition; it can be tested by prior arrangement.

turning diameter over bed: 510 mm turning diameter over slide rest: 310 mm centre distance: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck (diameter 250mm) tool holder device tail stock 3x steady rest Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlaufdurchmesser über Bett / rotary diameter over bed 510 mm Umlaufdurchmesser über Schlitten / rotary diameter over sledge 310 mm Spindelbohrung / spindle hole 52 mm Drehzahlbereich / spindle speed 44-2240 UpM /rpm Gewicht der Maschine ca. / weight ca. 2500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.