turning center used for sale

Mobile s/s turning table, dimensions: 1200 mm x 1200 mm x 820 mm.

Turning table, s/s frame, plastic top, table diameter: ø 1220 mm, total dimensions: 1250 mm x 1250 mm x 820 mm.

Turning table, s/s frame, plastic top, table diameter: ø 1130 mm, total dimensions: 1170 mm x 1170 mm x 900 mm.

Element welding Turntable werkstueck drehvorrichtung

-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SMT Lathe 80001350 The machine was designed and manufactured to produce rotor shafts for power tools. The machine is designed and manufactured to perform the following operations automatically. - Load/unload parts automatically from/to tool carrier line with a pick-up & placement unit between the shaft ends. - Rotate ring seat + flat rotate commutator + rotate commutator. - Ring mounting - Commutator side - Ring mounting - Drive wheel side The machine has several production programs to produce different parts. Each program uniquely corresponds to a wave type Specifications Anchor wavelength from up to 92.5 - 163.1 mm Bearing pin diameter commutator side 8; 10; 12.5 mm Drive side 12; 8 mm Min. Available length bearing position 3.6 mm Package diameter 52; 55; 59 mm Ring dimensions Outer diameter 40 - 57.4 mm Inner diameter 37.4 - 56 mm Ring width 4 - 8 mm R ...

Emco Emcomat 17S Year of construction: 1999 Center height 140/280 mm Weight 725 kg Dimensions: 1650x 1060 x 1290 Speed 15- 3550 rpm

Robust, high-quality welding rotator with a load capacity of 5 tons. Diameter range: 100-3500 mm. A sustainable turning device that is ideal for welding pipes and steel tanks. Easy adjustment of the roller spacing. Includes wired remote control and foot pedal. With the built-in master-slave function, you can control several driven units synchronously. CE conformity, 1 year warranty. The price does not include VAT and transport. Depending on your wishes, we can organize the transport.

AFM TAE 25N CNC turning center was built in 1997 by the Polish company AFM ANDRYCHÓW. The highly efficient machine, which is used for unit or series production, is ideal for any industrial plant with an emphasis on quality and precision. The turning process of workpieces with a maximum diameter of 300 mm is performed automatically in a large work area equipped with a 12-position SAUTER tool head and a reliable spindle. All parameters are porgrammed in the intuitive SIEMENS SINUMERIK 840D CNC controller, which reduces the operator’s need to operate the machine to a minimum. The AFM TAE-25N CNC lathe weighs 4200 kg. Technical specifications of the AFM TAE 25N turning center - working feed of longitudinal slide (X axis): 385 mm - working feed of transverse slide (Z axis): 150 mm - working feed rate range in the X,Z axis: 0-15000 mm/min - rapid traverse in the X,Z axis: 15 m/min - ...

DOOSAN LYNX 2100 LMA CNC turning center was manufactured in 2021 in South Korea. The machine offers best-in-class turning performance and precision, thanks to a wide design, a highly stable bed, a low-vibration spindle and a full guide guard that protects against coolant leaks and chips from entering into the machine. All this makes the DOOSAN LYNX 2100LMA CNC lathe ideal for any industrial facility where quality and precision are top priorities. The used spindle is driven by a reliable electric motor with high power, which is used for the versatile use of tools taken from the 12-position headstock. The turret, on the other hand, is controlled by a powerful servomotor which guarantees fast and accurate tool selection. All machining parameters are programmed in the intuitive DOOSAN FANUC i Series CNC control with many useful features, whose excellent optimisation allows maximising mach ...

turning diameter:520 mm turning length:600 mm control:Fanuc 0i TF swing diameter over bed slide:320 mm max. turning diameter:280 mm Bar capacity:51 mm spindle speeds:4500 1/min. x-travel:200 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min tailstock quill stroke:100 mm tailstock adjustment:500 mm spindle drive:11/15 kW Machine size (LxWxH):3,440x1,820x2,380 mm machine weight:4100 kg live center:4 MK turret:12-fach, VDI 40 Boring bar holder:BMT 65 hollow chuck:hydr. 250 mm brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. un ...

MAZAK MULTIPLEX 6100Y CNC turning center which was built in 2001 in Japan can fully automate the machining of workpieces with a maximum diameter of 500 mm, while maintaining high accuracy and precision. Turning takes place inside a large work space equipped with a rigid bed and a chip conveyor integrated into the coolant chute, designed to continuously evacuate the cuttings from the work area. In the machining process, the MAZAK CNC dual-spindle lathe uses tools housed in 12-position turret heads, distinguished by their reliable operation. Each of the two tool heads is 3-axis (X,Y,Z) and supports driven tools. In addition, to simplify and streamline turning, the workpiece can be machined on both spindles simultaneously and in link” mode, holding the bar in both chucks. The MAZAK ML TPLX 6100Y automatic lathe is also offered with a wide range of equipment, including the LNS QUICK  ...

Turning center USC 11, Emag – used - : Price from location: 29.500.-€ (net), plus dismantling etc.! System designation turning center USC 11 Manufacturer: EMAG Year of construction: 2006 Available: now Condition: good - very good Location: Hamburg area Technical data of the machine: Current Chuck passage max 160 mm X-travel 300 mm Z-travel 300 mm Main spindle bore 180 mm maximum speed 2000 rpm Motor main drive 80KW full power from spindle speed 500 rpm Feed rapid traverse speed. in X 35 m/min Feed rapid traverse speed. in Z 35 m/min Maximum power for X and Z 4.1 KW Maximum torque for X and Z 13 KW Operating voltage 400 V Control voltage - DC 24 V AC 230 V Frequency 50 Hz Connected load 130 KW Supply fuse 250 A Weight approx. 20,000 kg Description of the plant components: Machine bed length 3000 mm Cross slide 2-axle Motor lockers: frequency-con ...

OKUMA LB3000EX II CNC turning center was built in 2014 in Japan. This highly technologically advanced machine designed for the most demanding production challenges is distinguished by its extensive machining capabilities, reliable components and extensive equipment. This is what makes the machine ideal for efficient turning, milling, drilling, threading and slotting of workpieces with the highest precision and accuracy. In order to guarantee high dimensional stability and rigidity, an inclined bed is used inside the machine, on which the spindle and turret head are optimally positioned. In addition, special sensors have been placed in the key zones of the bed, spindle and head support, which monitor the current temperature status and actively correct the working travels. This solution helps to ensure proper thermal properties inside the working area. The LB3000 EXII MY C 450 lathe  ...

turning diameter:280 mm turning length:250 mm control:Fanuc 0i TF swing diameter over bed slide:280 mm Bar capacity:44 mm spindle speeds:4800 1/min x-travel:155 mm y-travel:+/-35 mm z-travel:250 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:11/15 kW Machine size (LxWxH):1.842x2.793x2.446 mm machine weight:5000 kg feeds:0.001-500 mm/U c-axis:0.001 ° turret:16-fach, BMT-55 type Y-axis:über Revolver mm hollow chuck:hydr. 200 mm :8 bar tailstock:ohne! brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor) 2. X/Z-axis stroke 200/600 mm 3. X/Z-axis rapid traverse 30/30 M/MIN 4. Spindle motor 11 / 15 Kw 5. Spindle speed 3500 rpm (Belt driven type) 6. Spindle bearing dia. Ø 120 mm 7. Bar capacity Ø dia 64 mm 8. CS axis function 0.001 degree spindle positioning 9. Hydraulic Hollow chuck 10" x 3 jaws 10. Hyd. unit for chuck with air ...

turning diameter:360 mm turning length:530 mm control:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mm swing diameter over bed slide:360 mm Bar capacity:64 mm spindle speeds:3500 1/min spindle speed:Gegenspindel: 5000 1/min x-travel:230 mm y-travel:±51 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:17 (Hauptspindel) kW spindle drive:5,5/7,5 (Gegenspindel) kW Machine size (LxWxH):3290x2180x2337 mm machine weight:6100 kg c-axis:0.001 ° turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mm hollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 bar hydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor)  ...

DMG GILDEMEISTER CTX 310 CNC turning center was manufactured in 2002. The machine with its small size and extensive equipment can fully automate the machining process of workpieces with a maximum diameter of 390 mm while maintaining high precision and reduced operating costs. The GILDEMEISTER CTX 310 CNC lathe is equipped with a 12-position tool head, an easy-to-use SIEMENS SINUMERIK 840 D CNC controller and a reliable powerful spindle rotating at a maximum speed of 5000 rpm. The total weight of the machine is 3400 kg. Technical specifications of the DMG GILDEMEISTER CTX 310 lathe - CNC controller: SIEMENS SINUMERIK 840 D - turning diameter (in tusk): 390 mm - turning diameter (over bed): 310 mm - minimum turning diameter: 8 mm - maximum spindle rotational speed: 5000 rpm - spindle passage diameter: 50 mm - 12-position tool head - tool holder: VDI 30 - operating hours: 35979 ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

max. turning diameter:395 mm turning length:490 mm control:Fanuc 0i-TF Manual Guide swing dia.:650 mm standard turning diameter:275 bar material dia.:68 mm spindle bore diameter:76 mm travel -x axis:235 mm travel -y axis:100 (±52,5) mm travel -z axis:580 mm Spindle 1 RPM:4500 1/min Spindle 1 Power:18,5 kW Spindle 1 Torque:209,5 Nm Spindle 2 RPM:6000 1/min Spindle 2 power:7,5 kW Spindle 2 torque:51,9 Nm turret stations / rotary tool stations:12/12 BMT 55 Power rotary tools:5,5 kW RPM of rotary tools:5000 1/min torque rotary tools:35 Rotary tool holders:4 Rapid feeds x/y/z:24/10/30 m/min Rapid travel B-axis (parts transfer subspindle):24 m/min dimensions of the machine ca.:4125 x 1752 x 2085 mm total power requirement:50 kW weight of the machine ca.:4,2 t high pressure coolant:50 bar Knoll KF110/700 Spindle 1 Chuck:200 mm Spindle 2 Chuck:150 mm Coolant through Mainspindle to Chuck:10 bar  ...

max. turning diameter:102 mm turning length:450 mm swing dia.:494 mm bar material dia.:65 mm spindle turning speed - stepless:S1 / S2: 4.000 1/min spindle drive:S1 / S2: 18,6 / 11 kW Turret No.1 stations / rotary tools:10/10 VDI 30 Turret No.2 stations / rotary tools:10/10 VDI 30 Driven Tools:8.000 1/min work piece power:3,7 kW total power requirement:90 kVA weight of the machine ca.:10 t dimensions of the machine ca.:6 x 2,5 x 2, m CNC-turning-center with 2 turrets, 8 axis, 2x 10-pockets turrets with live-tools, C-axis on both spindles, Y-axis +-35mm turret 1, 2pcs. collet-chucks, chipconveyor, barfeeder, tooleye, approx. 60.000h "machine on", approx. 17.500h "spindle on"

Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

HYUNDAI L230LMSA WIA Versatile CNC Turning Center Machine is like new condition Swing over the bed : 600 mm Swing over the carriage : 355 mm Maximum turning diameter : 310 mm Maximum turning length : 521 mm

Key data: 240 mm, 180 mm

Muratec MT-12 CNC turning center (2 spindles, 2 turrets and driven tools) CNC control Muratec-Fanuc 18i-TA Turning diameter 240 mm Turning length 180 mm Spindle bore diameter 51/45 mm X-axis travel 200 mm Travel Z-axis 200 / 650 mm Distance between spindles 650 mm Spindle speed 4500 rpm Spindle nose A2-5 Number of revolvers 2 Number of tools on the turret 15 Number of driven tools 15x If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Key data: 240 mm, 180 mm

Muratec MT-12 CNC turning center (2 spindles, 2 turrets and driven tools) CNC control Muratec-Fanuc 18i-TA Turning diameter 240 mm Turning length 180 mm Spindle bore diameter 51/45 mm X-axis travel 200 mm Travel Z-axis 200 / 650 mm Distance between spindles 650 mm Spindle speed 4500 rpm Spindle nose A2-5 Number of revolvers 2 Number of tools on the turret 15 Number of driven tools 15x If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

MAZAK INTEGREX turning/milling center 200Y Bu. 1999 Mazatrol fusion control Max Drehdurchm. 520 mm Max Schwingdurchm. 540 mm Maximum turning length 1,018 mm Bar passage 51 mm C-axis + angetr. Tools Y-axis +/-70 mm Distance between the top 500 mm Drive 30 kW Maximum main spindle spindle speed 5,000 rpm Maximum speed milling spindle 6,000 rpm Tool changer with 40 stations 3-jaw Chuck 200 mm Tool measuring arm Tailstock Chip conveyor Total connected load 31 kVA Machine dimensions 3.50 m x 2.10 m x 2.50 m Machine weight 6,800 kG 25 tool holder KM 36 duty hours approx. 36,000

CNC TURNING CENTER Condition Used Very good condition Control type Siemens Sinumerik 828D Maximum workpiece vaulting Ø 750 mm Max. workable diameter Ø 500 mm workable length 1.260 mm Turning diameter from bar max. Ø 90 mm Self-centering diameter Samchully Ø 315 mm Spindle hole Ø 102 mm Spindle speed 3,000 rpm Motor power 22/18,5 Kw X Shaft Stroke 335 mm Z Axis Stroke 1.350 mm Rapid feed X-Z 20-24 m/min Axis C 0,001° Tool turret 12 positions Motorized unit rotation speed 4,000 rpm MT5 tailstock cone Steerer diameter Ø 100 mm Tailstock stroke 1.350 mm Chip Evacuator Accessories

Key data: 430 mm, 744 mm

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

MAZAK SQT 15MS CNC turning center built in 1992 in Japan, is the best choice for any manufacturing facility. All of this is due to the 12-position toolhead and two powerful spindles (main spindle and sub-spindle) that maximise turning efficiency while maintaining high accuracy and precision. There is also an easy-to-use MAZATROL T32-3 CNC controller with a colour screen through which all machining parameters are programmed in just a few steps. The total weight of the machine is 4700 kg. Technical specifications of the MAZAK SQT 15MS CNC lathe General data - feed rate in X/Z axis: 180/575 mm - maximum workpiece diameter: 300 mm - maximum workpiece length: 531 mm - bar diameter: 51 mm - X-axis positioning accuracy: ± 0.002 mm - Z-axis positioning accuracy: ± 7 s - C-axis positioning accuracy: ± 0.003 mm - tool clamping force: 42140 N - tool head indexing time: 1.4 s/full st ...

Key data: 820 mm, 3048 mm

Mazak Integrex E-500H-ll x 3000 CNC Multitasking Turning/Milling Center CNC Control Mazatrol Matrix Dreg diameter 820 mm Turning length 3048 mm Spindle bore diameter 91 mm Spindle nose JIS A2-11 Speed 35 - 3500 rpm Milling head speed 5000 rpm X-axis travel 870 mm Travel Y-axis +250 / -250 mm Z-axis travel 3122 mm Travel B-axis -30/+210° C-axis indexing 350° Tool Cone Capto C8 Tools in Magazine 120 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Key data: 430 mm, 744 mm

Machine from prototype construction Emco Hyperturn 665 MC Powermill Turning - Milling Center, Built in 2003, Control Siemens, Turning length 744 mm, Swivel Ø 430 mm, Y axis +/- 50 mm, 2 x C axis 0.001°, Revolver 12 speed VDI 30, Milling head - B axis infinitely variable, Tool magazine 48 speed - Capto C 4, Counter spindle, rods up to 65 mm, Spindle speed up to 7,000 rpm, Coolant pressure 25 bar, Collet chuck E 185 E on main spindle, Three-jaw chuck Röhm KFD - HS 200/3 on counter spindle, Workpiece collection device main/counter spindle, Accessories

Key data: 390 mm, 800 mm

For sale: Daewoo Puma CNC turning center type TT2500SY with a Fanuc 18iTB controller. This is a CNC lathe with 2 spindles with a full C-axis, 2 turrets (BMT-65) with 12 positions (with intermediate positions) and a Y-axis on the top turret. All (driven) tool holders, including 2 driven holders in the angle, as well as a complete set of collets etc. are included with the machine. The machine also includes a 250 mm chuck for the main spindle.

MAZAK INTEGREX 200 SY + FLEX GL-100C. 2001. MAZATROL 640 MT control maximum turning diameter 540 mm Z-axis travel 1,065 mm Main spindle maximum RPM 5,000 rpm Main spindle full C-axis Counter-spindle maximum speed 6,000 rpm Y-axis +/-80 mm Milling spindle for turning and milling Spindle maximum speed 6,000 rpm Full B-axis, 225° Tool changer with 40 tool positions KM-63 tool mount Tooleye 1 x 3 - jaw Chuck, diameter 210 mm 1 x 3 - jaw Chuck, diameter 170 mm Gantry loader Flex GL-100 C. High pressure cooling through spindle, 20 bar Chip conveyor CE mark

CNC multi-tasking lathe NAKAMURA SUPER NTX-S Reference No.: 18038 Mfg. year 2007 S/No. V300901 FANUC 16i-TB Luckbei-dialog system supercap Maximum turning diameter -Upper turret 390 mm -Lower turret 300 mm Maximum turning length 1,100 mm Max cash working capacity 65 mm Milling spindle AC 18.5/11 kW Milling spindle maximum speed 12,000 rpm Capto C6 Servo controlled B-axis, 230° Y-axis 160 mm ATC with 40 tools Main and sub spindle AC 22/18.5 kW Main and sub spindle maximum speed 4.500 rpm 12/24-station turret, all stations for driven tools Maximum speed of driven tools 3,600 rpm 2 off. 3-jawchuck 210 mm, SCHUNK Coolant tank 250 liters High pressure pumps Swarf conveyor 1 set of toolholders for lower turret -static 9, 3-driven weight 19,000 kg CE-mark

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

DOOSAN PUMA 400LA 2007 DOOSAN PUMA 400LB 2007

turning diameter: 890,820 mm turning length: 4000 mm control: Siemens SIN 880T spindle taper: DIN 55026/15 spindle passage: 122 mm cross movement: 500 mm quill stroke: 140 mm tailstock adjustment: 3708 mm spindle turning speed range: 5-1800 U/min milling tool taper: 1500-6000 U/min feed: 0,5-5000 mm/min rapid traverse: 15 m/min feed power: 22000/10000 N Tool changer: 95 St. steady: CNC tail stock: CNC total power requirement: 50/69 kW weight of the machine ca.: 23,5 t dimensions of the machine ca.: 10x4x3,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

Working area Max. swing: 650 mm Swing over cross slides: 465 mm Max. turning diameter: 400 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X/Z) : 30/30 m/min Main Spindle Spindle head (flat flange): 170 h5 mm Bar capacity: ? 65 mm / ? 75 mm Spindle diameter in the front bearing: 130 mm Chuck: 250/315 Drive power (40/100% ED): 17.5 kW/12.5 kW Maximum torque (40/100% ED): 370 Nm/280 Nm Maximum speed: 4000 rpm Tool holder To ISO 230-2 in X/Z axes (indirect measurment system) : 8/8 ?m To ISO 230-2 for C axis: 20 ?m Tool holder Number of toll stations: 12 of which driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Controls SIMline withOperate on SIEMENS 840D solutionline Weight: 5800 kg

Working area Max. swing: 650 mm Swing over cross slides: 465 mm Max. turning diameter: 400 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X/Z) : 30/30 m/min Main Spindle Spindle head (flat flange): 170 h5 mm Bar capacity: ? 65 mm / ? 75 mm Spindle diameter in the front bearing: 130 mm Chuck: 250/315 Drive power (40/100% ED): 17.5 kW/12.5 kW Maximum torque (40/100% ED): 370 Nm/280 Nm Maximum speed: 4000 rpm Tool holder To ISO 230-2 in X/Z axes (indirect measurment system) : 8/8 ?m To ISO 230-2 for C axis: 20 ?m Tool holder Number of toll stations: 12 of which driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Controls SIMline withOperate on SIEMENS 840D solutionline Weight: 5800 kg

Working area Swing over bed: 650 mm Swing over cross slides: ? 465 mm Max. turning diameter: ? 400 / ? 315 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X / Z): 30 / 30 m/min Main Spindle Spindle nose: A2-8 Bar capacity: ? 80 mm Spindle diameter in the front bearing: 130 mm Chuck: 210 / 250 / 315 Drive power (40/100% ED): 25.5 / 17 kW Maximum torque (40/100% ED): 426 / 283 Nm Maximum speed: 4000 rpm Positioning accuracy Acc. to ISO 230-2 in X- / Z-axes (indirect measurement system): 5 / 10 ?m Acc. to ISO 230-2 for C-axis: 20 arcsec Turret Number of tool stations: 12 x VDI 40/6 x BT Of which driven tool stations: 12 Tool station diameter: 40 mm Max. power: 5.44 kW Max. torque (40 % DC): 20 Nm Max. speed: 4,000 rpm Tailstock Tailstock travel: 500 mm Life center interface: 5 MK Max. tailstock force: 8 kN Guidwa ...

Working area Max. swing: 650 mm Swing over cross slides: 465 mm Max. turning diameter: 400 mm Cross travel (X): 267.5 mm Longitudinal travel (Z): 600 mm Rapid traverse (X/Z) : 30/30 m/min Main Spindle Spindle head (flat flange): 170 h5 mm Bar capacity: ? 65 mm / ? 75 mm Spindle diameter in the front bearing: 130 mm Chuck: 250/315 Drive power (40/100% ED): 17.5 kW/12.5 kW Maximum torque (40/100% ED): 370 Nm/280 Nm Maximum speed: 4000 rpm Tool holder To ISO 230-2 in X/Z axes (indirect measurment system) : 8/8 ?m To ISO 230-2 for C axis: 20 ?m Tool holder Number of toll stations: 12 of which driven tool stations: 12 Shank diameter: 40 mm Drive power (40% ED) at 2000rpm: 4.2 kW Maximum torque (40% ED): 20 Nm Maximum speed: 4000 rpm Controls SIMline withOperate on SIEMENS 840D solutionline Weight: 5800 kg

Monforts RNC7 Type of machine: CNC lathe Manufacturer: Monforts Model: RNC 7 Year of manufacture: 1991 Control: Fanuc Technical data: Travel X/Z 415/1100mm, tool measurement, tailstock, Röhm lathe chuck, spindle speed 4000 min-1, disc turret with VDI60 interface, number of tool places: 12, turning length (max.) 1000mm, revolving Ø over bed (max.) 720mm, revolving Ø over radial slide (max.) 550mm, dimensions: 4930x2790x2200mm without chip conveyor, weight: approx. 12000kg

Machine Details Warehouse number 1105-03604 Machine type CNC lathe GILDEMEISTER/gratziano brand Type GP 50 Year of construction 2000 Control type CNC Control FANUC 18 I Storage location FRANCE Country of origin Germany Delivery time by arrangement Freight base from location Technical details Rod diameter 50 mm Chuck diameter 150 mm Turning length 500 mm Speed 6000/5000 rpm Indexing per C-axis, 0.001° degrees Tapping spindle yes/yes Rod diameter 50 mm Speed 5000 rpm Indexing per C-axis, 0.001° degrees Turret head (x-fold) 2x 12-speed VDI 30 Driven tool stations 2x 12 Control FANUC 18 I Coolant emulsion Total power requirement 45 kW Machine weight approx. 6 t Space requirement approx. 4.8 x 2.2 x 2 (+Irco) m Chip conveyor Bürener Maschinenfabrik Addition Energized and ready to demonstrate ya Accessories Tool holder 10 rigid, 3 driven pieces / off Part ...

Machine Details Stock-No. 1105-03607 Type of machine CNC Turning and Milling Center Make MORI SEIKI Type SL 150 SMC Year of manufacture 1997 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex stock Technical details turning diameter 420 mm turning length 560 mm control fanuc 16 T swing dia. 455 mm rapid power traverse in X-and Z direction 18/24 m/min Travel x/z 220 / 520 mm bar material dia. 45 mm spindle drive 11 / 7.5 kW Spindle RPM 50 - 5000 U/min Spindle Torque 143 Nm spindle nose JIS A2-5 Turret positions 12 supspindel wiht 3 jaw chuck sup spindle Travel 450 mm total power requirement 25 kW Additional information WHIT FANUC 16 T CONTROL SUP SPINDLE C AXIS LIVE TOOLS X 5 PARTS CATCHER COLLECT CUCK OFF MAIN SPINDLE AND 3 JAW CHUCK OFF SUP SPINDLE - coolant equipment SHIP CONVEYOR

Year of construction 2007 Control Siemens 840D Rotational diameter. [mm] 640 Turning length [mm] 1500 Main Spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Counter spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 Travel X/Y/Z 550/220/1,585 mm Rapid traverse in X/Y/Z 40/24/70 m/min B-axis 240° Tool carrier II (X/Z): Technology Star turret with 12 stations Tool holders VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm Rapid traverse in X/R  ...

Machine Details Warehouse number 1105-03632 Machine type CNC turning and milling center Make INDEX Type G 200 Year of construction 1997 Control type CNC Controller C200- Siemens 840 C Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from location Technical details Turning diameter 200 mm Turning length 400 mm Controller C200- Siemens 840 C Circulation diameter 420 mm Rod diameter 65 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - Spindle motor 100% ED= 7.5/13/20 kW Drive power - Spindle motor 40% ED= 13.3/22/29 kW Rod diameter 65 mm Spindle bearing diameter 100 mm Chuck diameter 165 mm Speed range - spindle ~ 6,000 rpm Drive power - spindle motor 100% ED= 7.5/13 kW Drive power - Spindle motor 40% ED= 13.3/22 kW C - axis 0.001 ° Number of revolvers 2. Turret head (x-fold) 2 x 14 pos Travel - x ...

Machine Details Warehouse number 1105-03648 Machine type CNC lathe - inclined bed machine Make DOOSAN DAEWOO Type PUMA 200 M Year of construction 1999 Control type CNC Control FANUC O T Storage location FRANCE Country of origin KOREA Delivery time by arrangement Freight base from location Price Technical details Turning diameter 290 mm Turning length 600 mm Control FANUC O T Bore diameter 66 mm Spindle speed 45-4500 rpm Revolver 12 COMPARTMENT Pinole diameter 80 mm Spindle head ASA - A 2 - 6 front bearing diameter 90 mm Tailstock pinole diameter 80 mm Centering bore mt - 5 Pinole travel 100 mm Axialkraf 12 , 5 - 500 kgf Sauter tool system driven tools 6 Number of tools max. 12 Total power requirement 36 kVA Machine weight approx. 4.2 t Information Equipment and accessories: Chip conveyor, C-axis, 12x star turret with AGW. TOOLS AND C AXIS FANUC O T ...