tubular used for sale

TUBULAR radiator in alluminium that can be used at 30bar. Complete line. We have a full production line for radiators to sell. We want to sell all the line, not a single machine. Inattached also the final product, radiators in alluminium in 3 difefrent measures and different hight.

8 pieces, Polyethylene semi-tubular film, residual stock, Width 550 mm Thickness: 30 microns Barrel length per roll:700 meters needled suitable for shrinking No guarantee is assumed for the technical data given in the description.

APV COMBI UHT TREATMENT STERILIZATION PASTEURIZATION PLANT – 2006 Includes both TUBULAR and INJECTION systems. Capacity 4.000 - 8.000 Lt /h DISASSEMBLED AND READY FOR LOADING - APV PLATE HEAT EXCHANGER for cooling - APV TUBULAR ( INDIRECT ) UHT Treatment system. - APV INJECTION ( DIRECT STEAM ) UHT Treatment system. - APV ASEPTIC HOMOGENIZER 250 BAR - OPTIONAL - APV CIP CLEANING UNIT - APV VALVE CLUSTER FOR ASEPTIC TANK - (TANK IS EXCLUDED) - ELECTRIC CONTROL PANELS Fast heating (~300°C/sec) for optimal taste and minimal degradation Instantaneous flash cooling for flavor and aroma preservation Uniform heating via indirect tubular exchangers for gentle thermal treatment High energy recovery (up to 90%) to reduce utility consumption and cost. Precise thermal control with uniform product treatment Efficient spore kill with very low C ...

USED GEA TUBULAR JUICE PASTEURISER DEAERATOR AND HOMOGENISER 7700 LPH FOR SALE Item #: Usm-187 Category UHT Plants 1) Pasterization plant with deaerator Ø program controlled Pasterization plant for fruit and vegetable juices, with a indirect heating system and regenerative exchange circuit, including a CIP connection and a connected deaerator Ø Manufacturer: GEA Finnah GmbH Ø Type: 6700/077 Ø Year of manufacture: 1998 Ø Max.capacity: 7700 L/h Ø for fruit and vegetable juice : viscosity 25 cp/10°C ; fibre lenght: 4-6mm 2) Homogenizer Ø Manufacturer: GEA Finnah GmbH Ø Type: NS 3075/55 Ø Year of manufacture: 1998 Ø Capacity: 7700 L/h Ø Operating pressure: max. 220bar

System Components: Main Control Cabinet - Voltage: 3 × 400 V ±10% - Frequency: 50 Hz - Rated Power: 34.2 kVA - Current: 49.4 A - Fuse: 80 A (gG) - Protection: IP 54 - Type: RCE - Weight: 500 kg - Year: 2020 - Standards: EN 60204-1, EN 61439-1/2 Positioner / Workpiece Manipulator - Type: RPT_05000AR6D PL - Weight: 1800 daN - Year: 2020 - Enables PA/1G optimal positioning - Rotational Axes: 7 - Repeatability: ≤ 0.15 mm Dust Extraction Unit - Model: Dustec 4 XL - Power: 5.5 kW - Voltage: 400 V / N / PE - Air Supply: 6 Bar - Filter Class: M - Year: 09.2020 Welding Technology - Process: MAG (1-wire) - Wires Supported: Solid and flux-cored (Ø 1.0–1.6 mm) - Arc Modes: Short, spray, pulse, long - Power Source: Fronius TPS 600i - Process Optimization: Task-specific Robot & Sensor Periphery - Automatic torch changer - TCP calibration - Internal variable access for diagnostics - On ...

Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h -  ...

Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com

Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, cereals or similar materials Conveying length (from inlet to outlet): approx. 2.5 m Diameter Ø: approx. 260 mm Slope approx. 120 mm Spiral height approx. 90 mm Spiral plate approx. 8 mm Inlet / outlet: approx. Ø 260 mm Remote storage with stuffing box Drive with gear motor 4 kW 68 rpm Total dimensions: approx. 3700 x 450 x 550 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sa ...

Bei Fragen: 01718367957

Capacity 85 beats / min.

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

A vertical pillow-pack packaging machine enables a very flexible manufacturing of packaging. Different bag types you can with short set-up and make-ready times through different options with different bag widths and lengths produce. The bag can be made with printed and transparent foil. FEATURE -Modern pillow-pack machine in the optimal price-performance ratio. Stainless steel with safety plexiglass Color touch-display with intuitive operating software -Fast, tool-free bag size change -Simple, intuitive operation -low maintenance APPLICATIONS Gusset bags, sealing bags, pillow bags Granules, food & non-foods, such as chips, rice, coffee, sweets, powders (flour, food supplements, etc.), TK goods, pet food, and much more. TECHNICAL data sample for the VSBM01 Film width: 220-520mm sealing width: 5-10 mm front surface width: 60-190mm Side Surface Width: 40-110mm maximum m ...

High-quality film from a German quality manufacturer – no imported goods! Ideal for manufacturers, co-packers and bottlers with the highest demands on aroma protection and machine compatibility. Product: Product Type: High Barrier Flat Film with EVOH Aroma Protection Aroma barrier: Extremely strong – also suitable for citrus aromas Color: Transparent Roll width: 260 mm Film thickness: 62 μm Roll core: 76 mm Length per roll: 1,000 m Manufacturer: Kaiser Verpackung GmbH Applications: ✅ Compatible with almost all flow-wrapping machines ✅ For food (e.g. spices, tea, snacks, coffee pods) ✅ For cosmetics & non-food ✅ Suitable for aroma-sensitive products Example: 15,000 running meters result in 100,000 bags of 15 cm each! Availability & graduated prices (1,000 running metres/roll): Prices per 1,000 m (1 roll): 5 rolls – 140 €/roll 10 rolls – 135 €/roll 30 ro ...

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system

From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg

-Intermittent flow wrapping machine in stainless steel design. -Servo drive in the cross-sealing station for ideal and reproducible bag qualities. -Separately controlled drives for high flexibility with different packaging formats. -Year of construction: 2016 -Refurbished in 2022 -Condition: as good as new Specifications: -Package length: 80-550 mm (1000 mm with double extractor) -Package width: 80-350 mm -Film roll width: 730 mm maximum -Film roll diameter: 350 mm / 40 kg maximum -Roller core diameter: 60-80 mm -Film material: all common hot or cold sealable films and composite films -Production capacity cycles/min: 60 purely mechanical

High-pressure tube fan made of aluminium, AD710mm, TDE 500 D4, Ruck, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. High-pressure tube fan, diagonal impeller ventilation fan, TDE 500 D4, Ruck, up to 9880m³/h, 3.3 KW, 400 V, do not operate without FIS! Aluminium design, AD 710mm, L730mm, incl. industrial plug Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improve ...

Professional horizontal packing machine from a reputed manufacturer. Suitable, for example, for packaging food, sweets, medical devices, technical articles, printing and paper products, household and toys, and textiles. Package width: 35 – 100 mm Ilbuifcbkb Package length: 65 – 160 mm Package height: 5 – 35 mm Capacity: 35 – 200 packs per minute Film width: 80 – 220 mm Machine weight: 450 kg Machine dimensions: Length 4.0 x Width 0.9 x Height 1.6 m 220V / 50 -60 Hz / 2.7 KW

Clocked, vertical Bosch flow-wrapping machine for powdered products with gassing and checkweigher The following components are installed: Bosch form, fill and seal machine Machine type: SVB3601R Year of construction: 2000 Clocked form, fill and seal machine Theoretically possible cycle rate: 50 btl./min. Bosch screw feeders Machine type: FVS 3091 SQ Products suitable for dosing: -Granules -Powder -Icing sugar -Flour - Ground coffee or coffee beans - Sauce, soup or milk powder, etc. Fumigation device Machine type: ZSG Basic 2 Residual oxygen monitoring can be switched on/off Bosch checkweigher Machine type: KWE 5000 Year of construction: 2009 The plant was dismantled and stored due to product changeover. 6 months before the removal of the machine, a lot of investments were made, including the installation of new sealing jaws and a new display. We ...

The system was built for a very special drugstore product, for which the customer became insolvent after a short time. It consists of: - HASSIA-PILTZ FlexiBag BC 260 Double-lane, fully automatic, vertical flow-wrapping machine, for flat and tetrahedral bags, for heat-sealable films Bag width from 2x50mm to 2x80mm Trigger length 50 - 250mm Seam width cross: 2mm Seam width lengthwise: 5mm Packaging material roll: max. outer diameter 600mm, core diameter 76mm min. 80 cycles/min single or 2x80 cycles/min - Dosing scale - Rovema EE 54 folding carton erector for fully automatic erecting and gluing of boxes and trays from flat blanks made of solid or corrugated cardboard currently. Box dimensions L84 x W84 x H85mm Output power 25 boxes/min - Head flap capping station Takeover of the folding cartons and transport to the filling station, fixation under the filling station a ...

Hassia Redatron FlexiBag 40/25 vertical form, fill & seal machine for pouches with auger dosing, bag size min. 60 x 50 mm (LxW), max. 400 x 260 mm (LxW), filling volume max. 4.4 litre, max. width of the foil reel 540 mm, maximum diameter of the foil reel 600 mm, electrics 3X230/400 V/50 Hz, capacity up to 150 cycles per minute

BÜHLER MWSB-100 dosing screw conveyor for weighing 100 mm diameter, length 2.75 m Engine 0.75 kw, rpm 107 Thread in the inlet progressive, inlet ø 390 mm, Outlet ø150 mm with pneumatic outlet Very good condition

Horizontal flow wrapper suitable for feeding and sealing blisters (two blister per flow bag) from the magazine into corresponding flow bags. Machine incl. code reader LAETUS type Argus 6012, image processing system UHLMANN type Visioread Colour, preparation for printer MARKEM type SmartDate X40, PLC SIEMENS Simatic S7-300, spare parts, etc. Output: up to 170 packages/min

Axial fan, axial tubular fan, with adjustable blades VEM, ILKA VAN 630 606-W TGL24818/01 2,83 - 4.25 m3/s 579 - 245 Pa impeller: Ø 620 mm inner diameter: Ø 630 mm motor: YMB 100 S 4 3.0 kW 1430 rpm 220 / 380 V New ! Dimensions: 680 x 680 x 470 mm

Centrifugal fan, centrifugal duct fan HELIOS RRK 200 speed: 2395 rpm motor : 115 W 230 V Inlet: Ø 200 mm Dimensions: 350 x 350 x 260 mm

Axial fan, axial tubular fan VEM, TURBOWERKE Meißen LANVR 315 TGL 0/63 0,0,0,0,0,0,0,0,0,0,0,0,0,0, /-br /- -br /-br /-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,-br /- /-br /-br /-br /-br /-br /0,0,000 31 - 0.53 m3/s 118 - 49 Pa impeller: Ø 310 mm inner diameter: Ø 315 mm motor: YMB 56 K 4 0.12 kW 1360 rpm 220 / 380 V New ! Dimensions: 370 x 370 x 290 mm

Axial fan, axial tubular fan VEM, TURBOWERKE Meißen LANVR 250 TGL 0/63 0,0,0,0,0 31 - 0.49 m3/s 324 - 167 Pa impeller: Ø 245 mm Inner diameter: Ø 250 mm Motor: YMB 63 K 2 0.25 kW 2760 rpm 220 / 380 V New ! Explosion-proof ! Dimensions: 300 x 300 x 260 mm

Axial fan, axial tubular fan VEM, TURBOWERKE Meißen LANVR 400 TGL 0/63 2280 - 3700 m3/h 21 - 10 kp/m² impeller: Ø 395 mm inner diameter: Ø 400 mm motor: YM 63 G 4 0.32 kW 1380 rpm 220 / 380 V New ! Dimensions: 450 x 450 x 300 mm

Axial fan, Axial duct fan VEM, ILKA VAV140/50 0,0,0,0 04 m3/s 45 Pa impeller: Ø 140 mm tube inner diameter: Ø 146 mm motor: 0.025 kW 2000 rpm 220 V AC 50 Hz New ! Dimensions: 150 x 150 x 70 mm

Flow-wrapping machine KLAT 14-IF – gentle packaging for sensitive products The KLAT 14-IF has been specially developed for packaging products that are sensitive to breakage. The adjustable inclination of the machine body of up to 45° ensures that the product falls into the bags particularly gently – ideal for sensitive goods such as biscuits, waffles or snacks. The machine is versatile and suitable for the production of: Stabilo bags Pillow Bags Stand-up bags Specifications: Maximum film width: 600 mm Maximum bag length: 310 mm The KLAT 14-IF combines high flexibility, product-friendly processing and precise sealing technology – an ideal solution for producers who rely on both product protection and attractive packaging formats. We will be happy to advise you on whether the machine is suitable for your products and offer you a tailor-made solution.

Tubular heat exchanger, shell-and-tube heat exchanger, heat exchanger PICKER AF07MFQOAA 2x connection thread: 1 ( inch ) 2x flange connection: inner diameter Ø 45 mm with 2x female thread each: M10 x 1.5, depth: 20 mm, hole spacing: 78 mm 4x fastening thread: M10 x 1.5, Depth: 20 mm, Hole Spacing: 115 / 85 mm Material: Aluminum ( Housing ), Copper ( Tube Bundle ) New ! Dimensions: 360 x 140 x 160 mm

Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...

Manufacturer: PFM Type: Zenith Inox Year: 2002 Capacity: ~50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

AMTEC FLOWwrap F3X-3XL50GS - Pendular Knife - Servo Version Flowwrapping machine with double servo motor for packaging wide range of products and large products. Feed table with automatic transport through carriers into the machine. Special guide module for safe product transport within the machine. The pendulum blade, driven by the servo motor, allows unlimited product lengths. Automatic stopping of the machine when no product, thus preventing empty bags. Machine stops at the set position to prevent the film from sticking to the blade. Print mark sensor included. PID temperature control. Easy maintenance. Error diagnosis and clear error display. Suitable for packaging uniform products such as biscuits, cakes, bread, pasta, pharmaceuticals, household appliances, industrial components, etc. Max. film width: 880mm, 1 oscillating knife. - Specifications: 220V, 3,6KW, 20-50 beuetel/min., ma ...

1 LAFER tubular knitt compactor type KST500, year 2009, working width 150 cm

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

For sale is a Rovema flow-wrapping machine for packaging coffee in the weight range 500 g to 1,000 g. The machine is fully functional and has an integrated aroma valve system for coffee bags with a freshness valve. Technical features: Suitable for 500–1,000 g of coffee Integrated valve system Robust, durable construction Ideal for pre-ground coffee or beans Extensive spare parts package included The machine comes from German quality production – solid, reliable technology ("good old workmanship"). A visit or demonstration is possible by arrangement.

20 pieces of 8/20 column heads for tubular steel columns. SO001083 Auction-ID: A1-46973-429

20 pieces tripod stand for tubular steel supports. SO001079 Auction-ID: A1-46973-428

40 pieces of ceiling props, tubular steel props Europlus 260 DB, galvanized, extendable from 1.54m - 2.60m SO001059 Auction-ID: A1-46973-421

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

Professional packaging machine from a renowned European manufacturer, equipped with many options and adjustment options. Suitable for packaging food (baked goods, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. Setting options: -Only "welding" or alternatively "welding and subsequent shrinking". -Welding time adjustable. -Shrink temperature adjustable. -Shrink time adjustable. -Holding time adjustable. program memory. Other characteristics: -Needle perforation via adjustable needle rings possible. -Maximum package size theoretically approx. L 550 x W 400 x H 200 mm. -Maximum film roll diameter approx. 300 mm. -Maximum film roll length approx. 600 mm. -The machine can be pushed or fixed via lockable castors. Special features/ options: -Automatic residual film rewinding -Second foil ro ...