136,861 used machines on RESALE, but how to find them? Machine Search
S. No.: 011001 Equipment / Additional information: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp ...
Inlet: approx. 600 x 580 mm Rotor width: approx. 600 mm Rotor diameter: approx. 450 mm Stator knives: 2 Rotor blades: 4
Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knives: 4 Rotor blades: 7 x 4
Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box
Travel: 350 x 250 x 220 mm [ X x Y x Z ] max. workpiece size Z: 220 mm max. workpiece weight: 450 kg Table size X: 600 mm Table size Y: 400 mm with automatic wire threading U- / V-axis: 80 x 80 mm Cutting in a water bath Conicity angle 20° at height 80mm
ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...
STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...
Many of our machines are available from stock. Call us to find out more. Fiber Laser Cutter FLV-3015-OE 3kW / VF1530-3000W Technical parameters - Maximum sheet size: 3000 x 1500 mm - X and Y axis positioning accuracy: ±0.05 mm/m - Repeatable positioning accuracy of X and Y axes: ±0.03 mm - Maximum speed: 60000 mm/min - Maximum acceleration: 0.7 G - Maximum load: 1200 kg - Power: 3.0 kW - Power requirement: 24.0 kW - Source brand: MAX Photonics - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Cutting thickness - Black steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Construction - Construction type: welded - Number of support legs: 8 - ...
PLC – controlled universal thread chasing machine suitable for all external and internal threads, as well as for peeling operations on rods and shafts (with peeling heads of different sizes), with 7" color touch screen. External and internal threads from M10 to M60 can be cut with the machine on all rotationally symmetrical workpieces such as pipes, bushings, shafts and reinforcing steel rods (taped external threads, drilled internal threads or rolled external threads with rolling heads). All thread types - male and female - metric ISO thread - Whitworth thread - trapezoidal thread - pipe thread - round thread - saw thread - UNC/UNF - and other USA threads etc. Strehlkopf speeds infinitely variable from 25 to 300 rpm Hollow spindle bore Ø 64 mm Maximum thread length 300 mm in one clamping (optional up to 600 mm length) The strehlkopf can also be used to peel wave-shaped ...
ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...
Vertical milling machine SPECIFICATIONS: Spindle milling machine: Ø 25 mm Speed: 12000 rpm Installed power: 2.2 kW ACCESSORIES: 3-roller drive with speed controller
Carpentry cross-cut saw Gama 65S Cutting height 245 mm SIDE TABLES WITH ALUMINIUM PROFILES OF 3 M EACH LEFT AND RIGHT
SPECIFICATIONS: 2 saw blades Ø 250 mm (2.2 Kw each) 2 saw blades Ø 350 mm (2.2 Kw each) Speed: 3800 rpm Machinable length: min. 200 mm-max. 1200 mm With chip transport carpet
M. No.: 3/60 388 Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller
Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg
we have two Polar loaders model TR150BL-3 1) Year 2001 with stand-alone gripper arm - BM5125 - comes from a P137X 2) Bj 2008 model - BM5126 - comes from a P155X cutting machine For the use of the devices, a rear table feeding of the high-speed cutter is a prerequisite
Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg
Code 211321230614 Description Centerlathe Make ICOCA Model SJ – 410 x 1000 G Serial No. 8708004 Year 1987 Distance between centers 1000 mm Swing over bed 410 mm Swing over gap 650 mm Swing over cross slide 220 mm Spindle bore 51 mm Number of spindle speeds 12 Spindle speeds 40 – 2000 rpm Feeds Longitude and Cross Motor power 5 kW – 380 Volts Thread cutting Metric, W.W. Accessoiries 3 chuck Ø 230 mm Rapide toolpost Coolant Condition Machine is in very good condition
Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding
Rotor 450 mm diameter x 580 mm width Semi-open rotor (new) with 5 rows of blades, newly mounted 2 stator knives Drive 45 kW Hopper for conveyor belt feeding
This 3-axis TRUMPF TRUMATIC L3030 was manufactured in 2002. It features a powerful 3,200 W CO₂ laser, with a working area of 3,000 x 1,500 mm and a maximum workpiece weight of 710 kg. The machine is equipped with Siemens Sinumerik 840D CNC control, ensuring precision in cutting. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L3030 CO₂ laser cutting machine we have for sale. Contact us for further details.
Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions
EAGLE EVISION 1530 F2.0 AF FIBER laser, manufactured in 2013 in Poland with its excellent rigidity and high stability, achieves the highest precision and quality in machining stainless steel, structural steel and aluminium sheets. The EVISION 1530 F2.0 AF laser cutting machine uses a high-quality 2 kW laser beam, which makes laser cutting smooth and trouble-free. The edges of the machined sheet metal are distinguished by their extraordinary smoothness, and the workpieces themselves are free of any irregularities. The large work table with a length of 3000 mm and a width of 1500 mm, together with the state-of-the-art EAGLE CNC control, make the machine capable of handling even the most demanding machining operations. The fibre laser weighs approximately 20 tonnes. Technical specifications of the EAGLE EVISION 1530 F2.0 AF laser - laser beam power: 2 kW (2000 W) - CNC control: EAGLE ...
including 1x Dahle A0 and 1x VVivid Scientific A4; Auction-ID: A1-44050-167
Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg
Featured; 3.5 liter V8 aluminum engine Auction-ID: A1-47418-188
used
Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg
TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...
Oxy-fuel; with built-in motor; 230 Volts; in case Auction-ID: A1-49889-127
EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...
maximum number of results exceeded
please refine your search
10 € 
