780 offers

New in: 2017
Price: 12.250 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

Demonstration machine Kioti CK2810 Year 2017 28PS, 360 h, 1. 3 m wide 740kg lifting capacity, 540U RPM PTO speed, 20 km / h speed, hoist with load position and lower throttle, hydraulic power steering, roll bar and lighting, all-wheel drive and differential lock can be activated mechanically, DW 1 - control unit, rear grass tyres 33X12.5-16.5 and front 23X8.5-12 Charges also snow plow, Sweeper, mower deck, etc. available more

New in: 2015
Price: 24.950 EU?
Location: Land-pl PL
Seller: Kennedy Machines

Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condition. more

New in: 2014
Price: 78.000 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

Fendt Vario 415 TMS Year 2014, 155PS, 3100 h 3 dw-control units Compressed air brake system Rear 650/65 R38 tires 70%; Tyres front 540/65 R26 50% mechanical cab suspension suspended front axle Worklights, air seat, air conditioning Stowage brake Compressed air brake system Front linkage and much more. more

New in: 2014
Price: 33.000 EU?
Location: Land-pl PL
Seller: Kennedy Machines
New in: 2009
Price: 57.000 €
Location: Land-at AT 3354 Wolfsbach, Bachlerboden 11
Seller: HDM GmbH

Fendt 411TMS year 2009, 116PS, 4320 h 4 double-acting control units CAB suspension Front linkage Automatic trailer coupling Radio Work lights Rotary light Air conditioning Compressed air Service maintained more

New in: 2006
Price: 25.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 110; Accessories: Forstkabine, Gänge / Laststufen vorwärts:24, Gänge / Laststufen rückwärts:24, Motorhersteller:John Deere, Steuergerät - Doppelt wirkend (2x), Diesel; Top speed [km/h]: 40 more

New in: used
Price: used machinery auction RESALE 75 €
Location: Land-at AT Laudonstraße 23, 9020 Klagenfurt, Österreich
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Serial. 201594, hours read off not legible, note to the State: battery probably defective or low drained, driver door defective lashed reasons (is) side mirror left broken, abrasions and paint damage all around vehicle, incl. on the containers, as well as charging system number: 3930-0-150-0156, 6130-0-000-1016 more

New in: 1996
Price: 16.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 54; Front tyre size: 7.50-16; Rear tyre size: 12.4-28; Rear tyres remaining: 95; Front tyres remaining: 80; Accessories: Forstkabine, Erstzulassung:29.08.1996, Steuergerät - Doppelt wirkend (2x), Zugmaul, Diesel; Top speed [km/h]: 30 more

New in: 1992
Price: request quote
Location: Land-de DE 68199 Mannheim, Altriperstr. 31
Seller: Jens Kürschner Maschinenhandel

2 way Unimog tractor Type U1600 Built in 1992 2 way Setup Zwiehoff Examination until January 2019 The offer is auisschliesslich Gewerbeteibende in the sense of § 14BGB more

New in: 1991
Price: 11.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 78; Transmission: Schaltgetriebe; Front tyre size: 13.6-24; Rear tyre size: 16.9-34; Accessories: Forstkabine, Gänge / Laststufen vorwärts:16, Gänge / Laststufen rückwärts:8, Motorhersteller: John Deere, Motor-Zylinderanzahl:4, Steuergerät - Doppelt wirkend (2x), Dreipunkt / Heckhubwerkanhängung, Hydraulische Lenkung, Schaltgetriebe, Diesel, Hydraulis; Engine displacement [cm³]: 3920; Top speed [km/h]: 30 more

New in: 1994
Price: used machinery auction RESALE 15.000 €
Location: Land-at AT Nähe 6130 Schwaz
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

last off Mark: BR-605BA registration: 14.01.1994 elapsed. Mileage: 115057km, BRA: 5286 power: 144kW displacement: 5958ccm inspection plate: 1/2018 drive type: diesel maximum speed: 90 km / h FIN: WDB4271051W17857 equity / total weight: 5.480/10.000kg construction: closed facilities: 4-wheel steering (can on) Vorderrad-4Radlenkung and crab steering be reverted), front PTO front including hydraulics, rear hydraulics, preparation for front PTO shaft available. Tyres: Warning: vehicle is sold with new street tires. Balloonreifen which are shown in the photo are not included in the lot! Documentation: licence of types of available key: 1 anchoring to the State: expressly pointed out is that n ... more

New in: 2002
Price: request quote
Location: NRW
Seller: HD Werkzeugmaschinenhandel GmbH

max. wheel diameter:2000 mm gear width:980 mm max. module:34 weight of the machine ca.:20 t dimensions of the machine ca.:7,9 x 6,0 m max. helix angle:-35° / +35° °/deg. ° stroke length max.:1000 mm rotary table diameter:1365 mm table load:20 t grinding wheel diameter:400 mm profile depth:75 mm power capacity:25 kW DESCRIPTION CNC-Profile Gear Grinding Machine for grinding external spur and helical gears Hydrostatic guideways in rotary table, column, stroke saddle Equipment: CNC-control KAPP D300 for 7 axes: - Z, W tangential travel of the slides - B head swivel - Y column travel - X stroke saddle - A rotary table - U dresser movement NC dressing unit with 1 dressing-spindle for diamon ... more

New in: 2007
Price: 1.160.000 USD
Location: Land-ru RU
Seller: RUSOFFERS Co.

PSM-043 2.48MWe GE JENBACHER JMS316GS-N.LC [1080 kVax3] Unused Not-installed Natural gas fueled Complete CHP Power plant 2007Y 10500V 50HZ 1500RPM EE39.6% 2.6MWt Boilers VIESMANN [x2] Power plant steel building 50MT Accessories and Ancillaries in OEM boxes included EXW RUSSIA. RUSOFFERS TRADERS TEAM [ROTT] has been looking for the strategic Company Partner (Co-Partner), which would have interest in acquisition and relocation of the above-mentioned unused complete asset for decentralized power/energy generation, which is being proposed as the asset recovery deal. ROTT aimed to establish long term business relations with the Co-Partners specializing as independent power producers which o ... more

New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

TECNOVA 130 mm. 54 L/D double degassing Siemens 280 Hp d.c. motor Silo with powder extractor Extraction auger Forced feeding unit Extruder with 130 mm screw 54 L/D N.2 vacuum degassing pumps 10 Hp. CAFI 130/220 screen changer with hydraulic power station Dynisco pressure controls TTC/700 die face pelletizer Centrifuge Vibro classifier Electric cabinet for complete management more

New in: 1971
Price: request quote
Location: Land-es ES 08036 Barcelona, Aribau 168
Seller: Inautex

PUCCI HYDROESTRACTOR. YEAR 1971 DIAM. 900 MM DEPTH: 450 MM CAPACITY: 50 KG REVOLUTIONS: 1100 Rpm more

New in: 1988
Price: 11.500 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 75; Front tyre size: 9.00-16; Rear tyre size: 480/70-34; Rear tyres remaining: 80; Front tyres remaining: 50; Accessories: Forstkabine, Kabinentyp:StarCab, Steuergerät - Doppelt wirkend (2x), Hydraulische Lenkung, Diesel; Top speed [km/h]: 30 more

New in: 1996
Price: used machinery auction RESALE 2.900 €
Location: 3100 St.Pölten, Porschestr. 23a
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

last off Indicator: GM-569EC registration: 30.7.1996 elapsed. Operating hour: 10,500 h performance: 112kW displacement: 5. 985ccm inspection plate: (green): drive type: diesel maximum speed: 50 km / h FIN: SLPHMV12550736367 equity / total weight: 5.660 / 7490 kg colour: yellow construction: closed tyres: front: 480/70R30, rear: 480 / 70R30 facilities: ECU DW: 4, PowerShift Transmission, climate, EHR, air brake, full suspension, rotating beacon. Key: 1 notes to the State: noise on the Antreibsstrang, Differnetialsperre rear axle will not turn off!, abrasion and wear and tear around the vehicle. Expressly stated, that no complete inventory and check the functionality of the auction object  ... more

New in: 2002
Price: 29.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 114; Transmission: Teil-Lastschaltgetriebe; Front tyre size: 420/70-28; Rear tyre size: 520/70-38; Accessories: Fronthydraulik, Gänge / Laststufen vorwärts:16, Gänge / Laststufen rückwärts:16, Motorhersteller:John Deere, Motor-Zylinderanzahl:6, Steuergerät - Doppelt wirkend (3x), Druckluftbremse, Dreipunkt / Heckhubwerkanhängung, Hydraulische Lenkung, Teil-Lastscha; Engine displacement [cm³]: 6788; Top speed [km/h]: 40 more

New in: 1979
Price: used machinery auction RESALE 1.450 €
Location: Nähe 6130 Schwaz
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

Year of construction: 1979 elapsed. Hours of operation: 9.075 h performance: 73.5 displacement: 5. 184ccm test notice: no inspection sticker to $57a. Drive type: Diesel FIN: 377.25.1005 equity / total weight: 4.360/6.500kg documentation: licence of types of available key: 1 comments on the State: div. abrasions, paint damage and rust spots around vehicles, defective brakes, oil loss. Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The  ... more

New in: used
Price: request quote
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Arbeitsbreite:305, Trommelanzahl (4 Stck.) more

New in: 2011
Price: request quote
Location: Land-de DE 28660 Dortmund, Hörder-Bach-Allee 15
Seller: 3axisgroup GmbH

CNC Control: Heidenhain iTNC530-3D 5axis X axis: 600 mm Y axis: 500 mm Z axis: 500 mm C axis: 360º B axis: -5º / +110º Table: 600 x 500 mm Cone type: HSK-63 Speed Spindle: 20-18.000 rpm Internal coolant supply 40bar 30pockets ATC Measuring probe Tool breakage control chip conveyor Oil mist extractor more

New in: 2002
Price: used machinery auction RESALE 3.500 €
Location: Land-de DE Germany, 70435 Stuttgart-Zuffenhausen
Seller: Surplex GmbH

Weight approx.: 8000 kg Dimensions (l x w x h) approx.: 1500 x 3000 x 5000 mm max. permitted load per load bucket: 280 kg max. permitted load: 2x 10.000 kg Description: HÄNEL Lean-Lift The Hänel Lean-Lift® is storage rationalization and stored goods protection in one: At the center of this closed system works a computer-controlled positioning lift - the extractor Special features: ? Fast storage and access times. ? High storage compaction, even with different filling heights. ? Load capacity per container up to 280kg at 32 Copntainer ? Load capacity up to 20.000kg (2x 10.000 kg) ? Integrated Warehouse Management. The Lean-Lift will be dismantled in week 43, 2018 and has to be picked u ... more

New in: new
Price: 650 €
Location: 10777 Berlin, Martin-Luther-Str. 3-7
Seller: Albens Development GmbH

absolutely new,. unused original packaging more

New in: 2010
Price: 9.800 €
Location: 47877 Willich, Hanns-Martin-Schleyer-Str. 16
Seller: Hoff Wohnmobil Service GmbH & Co. KG

Tractor: Deutz-Fahr AGROPLUS 320 Manufacturer: Deutz-Fahr Model: AGROPLUS 320 HP (kW): 82 HP (60 kW) Year of construction: 2010 Hours o. ha: 1500 more

New in: 2006
Price: 25.700 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 102; Front tyre size: 13.6-28; Rear tyre size: 16.9-38; Accessories: Forstkabine, Gänge / Laststufen vorwärts:20, Gänge / Laststufen rückwärts:20, Motorhersteller:John Deere, Steuergerät - Doppelt wirkend (2x), Einhebelsteuergerät, Luftgefederter Sitz, Diesel; Top speed [km/h]: 40 more

New in: 2002
Price: 990 €
Location: Eriswil
Seller: MATEC system+technik GmbH

Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC system + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12 more

New in: 1989
Price: 11.500 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 63; Front tyre size: 10.0-16; Rear tyre size: 480/70-34; Accessories: Forstkabine, Hydraulische Lenkung, Diesel; Top speed [km/h]: 30 more

New in: 2008
Price: request quote
Location: 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Technical data: -Workspace / cutting width approx. 1500 mm -Work area / cutting length of approx. 4 m career approx. 3000 mm -Control stream -Track width approx. Height 1900 mm - 1 plasma - torch -Plasma source KJELLBERG Hi FOCUS 160 i PGE-HM -Cutting current at 100% ED 10-160 A -Cutting capacity steel approx. 5-50 mm -Aluminium cutting area approx. 5-35 mm -Cutting range stainless steel approx. 5-30 mm -Connection 400 V / 35 kVA -Vacuum table with Extractor make TEKA, type Filtercube 4 H, BJ. 2008 -Weight approx. 4 T -Space facility approx. L 7.5 x H 1.5 X 2.4 m -Footprint extraction ap ... more

New in: 2007
Price: used machinery auction RESALE 60.000 €
Location: Land-de DE Germany, 54516 Wittlich
Seller: Surplex GmbH

Weight approx.: 16000 kg Dimensions (l x w x h) approx.: 20000 x 8500 x 3200 mm Description: serial no.: 30397 - voltage: 400 V - frequency: 50 Hz - max. diameter: 100 mm - max. sheet thickness: 25 mm - max. resistance: 410 N/mm² - max. weight 5000 kg - max. sheet width approx. 2500 mm - with 2 chip conveyors and 1 part conveyor - with FICEP-part display for the automatic gripping of sheets - with plasma source HYPERTHERM HPR 260 - serial no.: 078186 - YOM: 2007 - with control cabinet FICEP B 251 - YOM: 2007 - with several tool holders - incl. dust extractor DONALDSON DFPRO S-CYCLO - serial no.: 57093411 - power requirement: 11 kW - YOM: 2007 - with FICEP-control system as well as video more

New in: 2016
Price: used machinery auction RESALE request quote
Location: Hürth
Seller: Troostwijk Auctions

Gesammtgewicht 2200 kg; allowed front Achslast 800 kg; permissible rear axle load; 1400 kg; Hours 14 h; No CE approval. more

New in: 2002
Price: 45.000 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 140; Transmission: Stufenloses Getriebe; Front tyre size: 540/65-28; Rear tyre size: 650/65-38; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Stufenloses Getriebesystem, Steuergerät - Einfach wirkend, Steuergerät - Doppelt wirkend (3x), Druckluftbremse, Hydraulische Lenkung, Luftgefederter Sitz, Diesel; Top speed [km/h]: 50 more

New in: 2016
Price: 17.400 €
Location: Land-uk UK Chessington, Surrey, KT9
Seller: MaxiLion Ltd

An EX-DEMONSTRATION machine (September 2016) with just 3 RUNNING HOURS of light use in spotless showroom condition, representing a 25% discount off the new machine price with the "like for like" additional equipment installed (€23.060). - 01.14.30 CU 410 Elite S - CE. The machine complies with European safety regulations and complete with: self-braking motors, dynamic blades protection, bridge type protection (List price before discount: €15,900). LIST OF INSTALLED ADDITIONAL EQUIPMENT with prices before discount: - 58.04.93 Xylent” Spiral cutterblock with 3 series of knives complete with: 66No plates 15x15x2,5mm with 4 self-locking and self-centring screw knife plus a dynamometri ... more

New in: used
Price: 4.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 65; Front tyre size: 7.50-16; Rear tyre size: 13.6-36; Accessories: Forstkabine, Diesel more

New in: 2016
Price: 106.500 €
Location: Land-uk UK Chessington, Surrey, KT9
Seller: MaxiLion Ltd

A nearly-new machine with only 37 RUNNING HOURS of light use is for sale because the current owner is relocating. PRICE: New machine price paid in 2016 - €133.000. Also INCLUDED in the price of this listing: - CMS Athena POST PROCESSOR (worth €3,000); - Full set of 6No tool holders and different cutters; - Upon separate negotiation, a programming software ALPHACAM ROUTER ULTIMATE 2018 R1 licence (€12,000) is available to supply with the machine with 50% discount including the licence transfer fee paid directly to Alphacam. ________________ TOTAL price paid in 2016 for the above positions was in access of €150.000. The current asking price of €106.500 represents a massiv ... more

New in: 2009
Price: 44.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 182; Front tyre size: 600/65-28; Rear tyre size: 710/70-38; Accessories: Fronthydraulik, Gänge / Laststufen vorwärts:19, Gänge / Laststufen rückwärts:6, Motorhersteller:New Holland, Steuergerät - Doppelt wirkend (4x), Hydraulische Lenkung, Luftgefederter Sitz, Diesel more

New in: 1994
Price: request quote
Location: bak-tec-Industries
Seller: bak-tec-Industries GmbH

Reimelt fat frying line: - For about 2000 Berliner / h - 10 row filling station - Extractor hood with extinguishing device - Large intermediate fat tank - Completely in stainless steel - Power consumption: 85 KW - Control voltage: 220 V / 24 volts - Three-phase current: 380/400 volts / 3 N / 50 Hz. - Dimensions and operating instructions on request - Test run and delivery with commissioning on request more

New in: 1994
Price: 15.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Power [PS]: 116; Front tyre size: 380/85-28; Rear tyre size: 420/85-38; Accessories: Forstkabine, Gänge / Laststufen vorwärts:24, Gänge / Laststufen rückwärts:24, Steuergerät - Doppelt wirkend (3x), Hydraulische Lenkung, Diesel; Top speed [km/h]: 40 more

New in: used
Price: 1.250 €
Location: Rheda-Wiedenbrück
Seller: Optimal Maschinen UG (haftungsbeschränkt)

BGU clean air suction unit / dust Extractor Type 2000 RLG Motor 2,2 kW Nominal volume flow 1365 m ³/h Nominal speed 2200 rpm. Diameter suction pipe 140 mm GS characters / H2 Mobile Operating instructions checked more

New in: 1989
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Bottle Washer Klinger NDS 1L with label extractor 4500 bph This bottle washer was made by Austrian Klinger in 1989 and it has been refurbished by Kahl+Schlichterle in 2012. It has a label extractor and the machine is currently operational. The structure material is stainless steel and infeed and outfeed conveyors are included. The refurbishment in 2012 included checking and refurbishing the bottle inlet and outlet system, all pumps, the heating system, label removing system, the complete spraying system and complete changement of bottle cells. Make: Klinger Flaschenwaschsysteme GmbH, Austria Type: NDS 1L Year: 1989 / 2012 Capacity: 4.000 to 4.500 bph Bottles per row: ... more

New in: used
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Bottle Washing Machine Klinger NDS 24/1/70 - 11 000 bph This KLINGER Bottle washer (from Austria) has been re-installed in 2013 after a complete reconditioning by Karl + Schlihterie. It has been out of service from 2016, last major maintenance was in November 2015. It was used to wash returnable glass bottles. The machine has a label extractor, and all conveyors are included with their electrical motors. The equipment is in fair condition, dismantled and ready for immediate shipment. Make: Klinger Type: NDS 24/1/70 Built: UNKNOWN (Plate is missing) Capacity: 4 800 – 11000 bph Bottle handling: Glass 0.2 up to 1.0 ltr Power / voltage 400 V / 60 Hz - 3 phase, 21 kW Material: Sta ... more

New in: 2018
Price: request quote
Location: Deutschland / NRW
Seller: Sperling Werkzeugmaschinen

grinding wheel diameter: 200 mm no. of working stations: 1 Stück grinding wheel width: 19 mm grinding band dimension: 100 x 1150 mm turning speeds: 2850 U/min saw band speed: 30 m/s grinding wheel size: 200 x 19 x 20 mm grinding wheel speeds: 2850 U/min grinding band dimension: 100 x 1000 mm total power requirement: 0,75 kW weight of the machine ca.: 31 kg Heavy duty universal grinding and sanding machine in industrial quality. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. Supplied with additional polishing disc and steel brush. emergency stop with no-load switch adjustable  ... more

New in: 2002
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Tray Shrink Wrapper Variopac TFS-60, year 2002 This shrink wrapping machine was delivered by Kettner in 2002. It has been used for 0.5 liter glass bottles on a carton tray and wrap it in to shrink wrapped plastic film with the capacity of 60 cycles per hour or 42 000 bph. The equipment is currently dismantled and packed professionally by a KHS contractor. It is in good condition, ready for immediate relocation. Made by Kettner GmbH Model Variopac TFS-60 Year of commission 2002 Serial number 8803026 Capacity 60 cycle per minute / 42 000 bph Packing configuration: 3 x 4 bottle trays Material Stainless steel Size of bottles used 0.5 liter glass Voltage and frequency 3 x 380 V - 50 ... more

New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

grinding wheel diameter: 300 mm no. of working stations: 2 Stück grinding wheel width: 50 mm bore: 25 mm grinding wheel speeds: 1420 U/min total power requirement: 2 kW weight of the machine ca.: 105 kg dimensions of the machine ca.: 800 x 470 x 530 mm Heavy duty grinding machine in industrial quality. For the workshop, manufacturing industry and heavy grinding work. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. emergency stop with no-load switch adjustable tool rest with eye shield with dust extractor connection with 2 grinding stones (coarse and fine) more

New in: 2003
Price: request quote
Location: Jülich
Seller: Günter Sieben Landtechnik

Tractor of New Holland TM 135, BJ. 2003, 6 cyl., 135 HP, cab, air, 1 + 2 line DL, 4 dw ECU, Powershiftgetriebe, 6, autom. Hitch, front weights, BER. front 540/65/28 (20%) and rear 650/38 (80%) more

New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

grinding wheel diameter: 200 mm no. of working stations: 2 Stück grinding wheel width: 20 mm bore: 16 mm grinding wheel diameter - width-internal grin: 200 x 25 x 20 mm grinding wheel speeds: 2850 U/min voltage: 230 V total power requirement: 0,45 kW weight of the machine ca.: 19 kg dimensions of the machine ca.: 525 x 335 x 295 m Industrial quality machine. Powerful motor, no vibration through clever balancing. Heavy duty tool rests and protection covers. Low noise, tool rests adjustable. With high quality eye shield. emergency stop with no-load switch adjustable tool rest with eye shield with dust extractor connection more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: