track used for sale

Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor  ...

This machine integrates track building, peeling, and brushing functions - Hydraulic lifter - Electric Control Panel – Operates on 380V / 220V - Hand brusher (Yellow) Find more here - / Contact us at -

This self-priming 12-inch emergency pump is designed for rapid deployment in high or low water emergencies. Unique to this B300 is the tractor drive (PTO)., -Max capacity 1500 m3/h. , -Max delivery height 25 mwk., -Max dirt passage 70 mm., , Comes with 2 trailers (slow traffic / no license plate) filled with piping, for suction and discharge of the pump, , AHW1 ), 2x suction/discharge hose 12, length 4 meters, 1x suction basket 12, 1x 90° bend 12, 1x 45° bend 12, 9x drain pipe ‘lightweight’ 12, length 4 meters, , AHW 2 ), 2x suction/pressure hose 12, length 4 meters, 1x suction basket 12, 1x 90° elbow 12, 1x 45° elbow 12, 9x drain pipe ‘lightweight’ 12, length 4 meters, , Can be transported in one go, pump can be connected to the trailers, trailers can be connected together , , Very good condition!, , Throughput capacity: 1500 m3/h, Max dirt passage: 70 mm, Max. head: 25 MWK, ...

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

Manufacturer: SEBA Model: Lite Track 70-40 New Evolution Year of Manufacture: 2022 Operating hours : 45 h Technical Specifications - Operating weight: 12,000 kg - Transport length: 5,300 mm - Working length: 8,630 mm - Width: 2,420 mm - Height: 2,750 mm - Engine: Yanmar diesel, 53.7 kW / 850-2,000 rpm - Travel speed: 0.7 - 1.3 km/h - Maximum gradient: 30% - Conveyor belt speed: 1.85 m/sec - Hopper capacity: 2.5 cubic metres - Output capacity: 10 - 45 cubic metres per hour - Jaw opening: 700 x 400 mm - Hydraulic jaw gap adjustment: 15 - 100 mm Standard Equipment and Features - Vibrating feeder with pre-screening grizzly - Reversible discharge conveyor for pre-screened material - Remote control for all machine movements, including 2 battery packs - Level sensor at crusher inlet - Magnetic separation belt - Anti-dust system - Lighting for night operation - Video camera monitoring at  ...

Technical specifications, · Crusher: Jaw crusher with an inlet opening of approx. 1,100 × 750 mm (in some variants 1,100 × 800 mm), · Performance: Depending on material and settings, the plant achieves a capacity of up to 400 t/h, · Weight: The transport weight is 44.2 t, · Dimensions: Transport length approx. 14.24 m, width approx. 3.00 m, height approx. 3.35 m, · Antrieb: CAT / 179 kW diesel-hydraulic system with load sensing to save fuel, · Year of construction: 1996, · Operating hours: 12,000 h, · Year of construction: 1996, · Operating hours: 12.000 h

Material Name: SS 430 Former Holder Track (In Oven) Material Brand: Generic Model: Former Holder Track Material Type: Fabricated oven track / guide rail Material Specification: Fabricated oven track / guide rail PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Self-propelled lawn mower, track, with remote control, suitable for grasses. Includes trickle charger. Can be used on a slope of 70% Direct solution in agricultural landscaping, in orchards, vineyards, slopes, embankments, farms, solar power plants, etc. Remote mowing is safe and efficient. Drive electric, mow gasoline Unused Auction-ID: A1-40262-190

Pallets chain segment with duplex chain for transverse with SEW drive 4 lines L 3000 3 pallet transverse 3250,- 4 lines L 2100 2 pallet transverse 3050,- 4 lines L 1300 for 1 pallet transverse 2850,- 3 lane L 3000 3 pallet transverse 2960,- 3 lane L 2100 2 pallet transverse 2760,- 3 lane L 1300 for 1 pallet transverse 2560,- Altitude 600 mm +/-100 mm Base in painted version, V SQM A version for an additional fee

Properties < b >: < / b > Used Roller converter of manufacturer Overbeck Feet to be ordered separately Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Interroll motor roller v-belt drive maximum width 68cm packages that can be implemented to converter < b > < /b > Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data < b >: < / b > Mass of the roller length: 2000 mm Total width: 600 mm Segment length: 750 mm the role < /b > details < b > Clamping length: 450 mm Diameter approx: 50mm Length: 100mm Material: Steel, galvanised the framework < /b > details < b > Frame height: 135mm Frame width: 30mm Ma ...

Various secure retirements for Canalis KS25 tracks, some with CEE and Sockets, partly for cable connection. Outlets with outlet fuses with machines or screw locks. Compl. Wired and ready for use. Finish request please inform. Questions to Manfred Raupp 0170 / 2204056 Mail to: fa.raupp@t-online

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

Serialization system for packaging line: suitable for the printing of code data on the cartons. Incl. camera vision system, bad ejection and data management system etc.

<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 900mm Total width: 1030 mm Width: 485 mm <b>Information on the role</b> Clamping length: 415 mm Diameter approx: 50mm Material: Steel, galvanised <b>Information to the converter</b> Length: 910mm Belt width: 25 mm Number of straps: 4 PCs. <b>Tailor-made solutions for your intralogistics</b> We are ...

Roller tracks for cross promotion of wood Width 110 mm Enable roles Approx. 3 m long rail pieces with requirements for package promotion 6 piece Weight 600 kg In good condition, ready to use Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Off-road crawler articulated work platform off-road platform caterpillar platform Can also be moved when lifted ideal for tree and hedge trimming, fruit tree management, hop garden cultivation assembly work indoors and outdoors. Due to its low dead weight, the machine can also be transported with a car transport trailer. FRONTEQ Type: FBZ-6T Payload: 230 kg Platform dimensions: 1.15 x 0.75 m Platform rotatable: 80° / 80° Transport dimensions 5.04 m x 1.54 m Height: 2.10 m Weight approx.: 2700 Kg Working height: 8.4 m Platform height: 6.4 m max. radius approx. 4.3 m Climbing ability up to: 45% Maximum working inclination: 3° / 3° Overload Shutdown: Proportional hydraulic drive Battery drive 2 x 4 pcs 6 V / 230 Ah Integrated charger 24 V/ 60 A German instruction manual included 2-year manufacturer's warranty ...

Roller conveyor / pulley conveyor curve 90 degrees Manufacturer: Costo Year of Make: 2009 Condition: Used Model: 90 Degree Curve Total width outside: approx. 2250 mm Total width inside: approx. 1140 mm Total width: approx. 800 mm Conveyor width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Stock: 2 pieces Price per piece Condition: fully functional, with signs of wear Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026031202 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, ...

-Hydraulic tipping -Self-charging -New -No documents Auction-ID: A3-43534-30137

<b>Properties:</b> Used Roller track converter of manufacturer's scarce Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Drive type: flat belt with motor Number: 4 PCs. 2 STK. with partial engine 2 PCs with engine under the conveyor <b>Converter</b> Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. <b>Technical data: Mass of the roller</b> Overall length: 720mm Total width: 1040 mm Width: 485 mm <b>Information on the role</b> Clamping length: 415 mm Diameter approx: 50mm Material: Steel, galvanised <b>Information to the converter</b> Length: 910mm Belt width: 25 mm Number of belts: 2 P ...

-Hydraulic tipping -Self-charging -New -No documents Auction-ID: A3-43539-30144

Auction-ID: A3-43543-5225

Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Scissor Roller Conveyor, Scissor Conveyor PAGUS 83 - 190 cm 48 cm Roll Width Height 70 - 105 cm Dimensions: 950 x 650 x 800 mm

A Varpe double-track scale including a Loma metal detector is available. Accuracy class: XIII(1), scale division: 1g, readability: 1g, product weight min./max.: 30g/500g, cadence: 103rpm, speed: 0.5m/s. Documentation available. On-site inspection is possible.

Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...

Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 ...

The scope of delivery includes: 01x Rail / Track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Bridge: approx. 12 mm Weight: approx. 120 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Interroll Roller Conveyor 0.99m with Drive The Interroll roller track element is in very good condition. Furthermore, the runway has its own drive motor. Width: 400mm Length: 990mm Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Rail wheel, flanged wheel, track roller, track wheel, wagon wheel, track roller -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange 193/197 mm, see photos -barrel width: mm -Axle Ø: approx. 17 mm -Number: 2x wheel available -Price per piece -Total dimensions: Ø237 x 100 mm -Weight: 7.0 kg/pc.

Rail wheel, flanged wheel, track roller, track wheel, wagon wheel, track roller -Rail wheel: Flanged wheel with bearing -Wheel: Ø without flange 196/200 mm, see photos -barrel width: mm -Axle Ø: approx. 17 mm -Number: 1x wheel available -Price per piece -Total dimensions: Ø238 x 100 mm -Weight: 8.0 kg/pc.

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

HORSCH Touch 1200 ISOBUS terminal with Section Control & Track Leader High-quality ISOBUS operator terminal for modern agricultural technology Suitable for controlling ISOBUS devices from different manufacturers Ideal for precision farming applications Equipment: ISOBUS-UT (Universal Terminal) ISOBUS-TC (Task Controller) Section Control Track Leader (Guidance System) Virtual ECU integrated Features: Machine control via ISOBUS Automatic section control Lane guidance (GPS prepared) Area documentation Operation via touchscreen Note: Other software options available but not enabled Auction-ID: A7-46606-1020

Equipped with articulated steering, Continental Trackmann tracks, track width 750 mm, AFS PRO 700 monitor, leather driver’s seat, multifunctional armrest, air brake system, load sensing, drawbar, LED work lighting, air conditioning. The gearbox was overhauled on 07-05-2025 at an operating hour reading of 8538 hr (invoices available for inspection on site). Auction-ID: A1-46064-3

Set suitable for a track width of 2250 mm, consisting of front tires: BKT 420/85R28, bolt pattern 10x335, hub Ø 275 mm; rear tires: Michelin 650/65R38, without center disc. Auction-ID: A1-46064-46

Time & Attendance STRIXORN, RFID Cards, Fingerprint, Charging Plug

Ceiling lighting LED track system approx. 36 m, ATTENTION lamps must be dismantled

Machine type: Mini excavator Manufacturer: Volvo Construction Equipment Model: ECR88D Product identification number: VCE0ECR88D00214094 Technical data: - Operating mass: 8,778 kg - Engine power: 43 kW - Manufactured in: Korea - Compact radius design - Rubber tracks - Front dozer blade - Enclosed cabin Year of manufacture: 2018 Operating hours (read): approx. 3,863 h Condition: - Used condition - Fully operational appearance - Normal wear on bucket, tracks and body Remarks: - CE marked - With digging bucket - Compact machine suitable for urban works Own mass: approx. 8,800 kg Auction-ID: A7-45990-20

Machine type: Crawler excavator Manufacturer: Caterpillar (CAT) Model: 318C L Year of manufacture: 2006 Serial number: CAT0318CADAH00959 Technical data: Engine power: 94 kW Operating weight: 22,400 kg Equipment: - Standard digging bucket - Mono boom - Steel tracks - Enclosed operator cabin - Hydraulic quick coupler (visible) - Auxiliary hydraulic lines on boom Condition: - Used condition - Undercarriage in used condition - Identification plate damaged but readable Remarks: - Proven CAT 318 series machine - Suitable for general excavation and earthmoving works Own mass: approx. 22,400 kg Auction-ID: A7-45990-42

Machine type: Crawler excavator Manufacturer: Liebherr Model: R924B HDSL Litronic Year/Manufacturer: 2007, Liebherr France S.A.S. Serial number: WLHZ0761EZC020270 Operating hours: approx. 13,325 h Technical data: Engine power: 127 kW Max. travel speed: 5.2 km/h Engine: Liebherr diesel engine Equipment: - Mono boom - Standard dipper arm - Digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Visible signs of wear, scratches and paint damage Remarks: - Solid 24-ton class excavator - Suitable for earthmoving and general construction works Own mass: approx. 24,000 kg Auction-ID: A7-45990-45

Machine type: Crawler excavator Manufacturer: Volvo Construction Equipment Model: EC210CL Year of manufacture: 2007 Serial number: VCEE210CJ00110668 Operating hours: approx. 8,967 h Technical data: Operating weight: approx. 22,960 kg Engine power: 110 kW Engine: Volvo diesel engine Equipment: - Mono boom - Standard dipper arm - Digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Signs of wear and scratches - Engine visually complete Remarks: - Popular 20-ton class excavator - Suitable for general construction and earthmoving Own mass: approx. 22,960 kg Auction-ID: A7-45990-44

Manufacturer: SANY Heavy Machinery Limited Model / Type: SY55U (G4) Machine type: Hydraulic excavator (mini excavator) Serial number: SY005CER965K8 Year of manufacture: 2025 Operating mass: 5,294 kg Engine power: 36.0 kW @ 2000 rpm Manufactured in: China (Jiangsu) Remarks: CE marked; enclosed cabin; rubber tracks; front dozer blade; equipped with digging bucket; modern digital display showing approx. 69 operating hours; very good visual condition with minor signs of use; machine appears nearly new; Own weight: approx. 5,300 kg Dimensions (L x W x H): approx. 5,500 x 2,000 x 2,550 mm Auction-ID: A7-45990-2

Machine type: Crawler excavator Manufacturer: Hitachi Model: ZX225USLC-3 Year/Manufacturer: n/a Serial number: HCMBFH00T00214087 Operating hours: n/a Technical data: Engine power: 122 kW Operating weight: 25,400 kg Engine: Isuzu diesel engine (approx. 128.4 kW @ 2000 rpm – plate visible) Equipment: - Monoboom - Standard digging bucket - Steel tracks - Enclosed operator cabin Condition: - Used condition - Visible wear, rust and paint damage Remarks: - Short tail swing (USLC) version - Suitable for general excavation and construction works Own mass: approx. 25,400 kg Auction-ID: A7-45990-50

Machine type: Tracked excavator Manufacturer: Caterpillar Model: 320E L Year of manufacture: 2016 Serial number: CAT0320EHNAZ02205 Operating hours: 8,771 h (displayed) Operating mass: 22,400 kg Engine: Caterpillar C6.6 ACERT diesel engine Engine power: 114 kW Undercarriage: Steel tracks Cab: Enclosed operator cabin with display Boom: Mono boom Stick: Standard stick Bucket: Digging bucket included Made in: Japan Remarks: - CE marked machine - Original Caterpillar identification plate available - Machine type: Hydraulic excavator - Digital display showing approx. 8,771 operating hours - Normal wear on bucket and undercarriage components - Engine compartment accessible and visually complete - Signs of use consistent with age and hours - No functional test performed Own weight: approx. 22,400 kg Auction-ID: A7-45990-6

Model: Takeuchi TB175 Type: Tracked excavator Operating weight: 7,280 kg Engine: Yanmar 4TNV98, 4-cyl diesel Engine power: 42.8 kW (58 HP) @ 2200 rpm Hours: 3,829 h Year: 2006 Bucket capacity: approx. 0.3 m³ Max digging depth: approx. 4.6 m Max dump height: approx. 5.0 m Max reach: approx. 7.2 m Boom type: mono boom Hydraulic system: variable displacement, load-sensing Cabin: enclosed ROPS/FOPS, heater, ergonomic joystick control Included equipment: digging bucket, dozer blade, steel tracks, work lights Compliance: CE Power supply: Diesel Manufacturer: Takeuchi Mfg. Co., Ltd., Sakaki, Nagano, Japan Approx. own mass: 7.3 t Durable and efficient excavator ideal for construction, roadwork, and utility projects requiring compact operation. Auction-ID: A7-45990-12

Machine type: Mini excavator Manufacturer: Komatsu Model: PC88MR-6 Serial number: F002357 Year of manufacture: 2007 Operating hours: approx. 7,750 h (readable) Engine type: Komatsu S4D95LE-3 Engine power: 53 kW Displacement: 3.261 l Undercarriage: Steel tracks Blade: Front dozer blade Bucket: Included Cab: Enclosed cabin Remarks: - CE marked machine - Manufacturer plate present and readable - Normal wear consistent with age and hours Own weight: approx. 8,450 kg Auction-ID: A7-45990-11

Chassis number not readable, PTO speed 540/1000 Auction-ID: A1-40139-45

CARL ZEISS OPTOTECHNIK - T-SCAN 20 + T-CONTROL 20 + T-TRACK 20 The T-SCAN 20 is a handheld 3D scanner produced by ZEISS Auction-ID: A1-47049-11

CREAFORM MetraSCAN 3D C-Track 780 (Expired License) This optical scanner has been designed to perform high-precision and repeatable metrology measurements, as well as 3D surface geometric inspections. Auction-ID: A1-47049-43