british flag
Resale Logo

tool used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used engines and spare parts  Motoren Steffens GmbH  http://www.motoren-steffens.de 
banner logo
start page > keywords tool > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125922529 109

VICTOR VC 70 for sale
CNC machining centre Victor VC 70


Built in 2001, X axis travel Y axis travel 480 / 430 mm, 700 mm, Z axis travel 510 mm, rapid traverse X/Y/Z 30 / 30 / 24 m / min, X/Y/Z axis motors: 1.8 / 1.8 / 3 KW, table dimensions pallet changer, maximum table load o ...
used machine
 
Built in 2001, X axis travel Y axis travel 480 / 430 mm, 700 mm, Z axis travel 510 mm, rapid traverse X/Y/Z 30 / 30 / 24 m / min, X/Y/Z axis motors: 1.8 / 1.8 / 3 KW, table dimensions pallet changer, maximum table load of 500 kg, 2 x 800 x 460 mm, spindle cone SK 40,. Power, spindle motor konst/30/10 min 5,5 / 7,5 kW, spindle speed 8000 U/min, maximum tool diameter (without adjacent tools) 80 (125) mm, maximum tool length 3000 mm, maximum tool weight 8 kg, station in the magazine 24 no. , Tool change time 1.5 (W W), 4.9 (S-S) sec., coolant tank 24 L, Fanuc 0i-M, performance requirement 23KVA, machine dimensions (Lxwxh) 2123 x 2350 x 2550 mm, machine weight 4100 kg
2001
Price  
    request
125917910 205

BIESSE SKIPPER 100 for sale
CNC Machining Center


Weight approx.: 2700 kgDimensions (l x w x h) approx.: 7300 x 5000 x 2400 mmDescription: Serial number 14223, The panels are moved on an air floatation table respect to the tools which are fixed, No waste of preparation  ...
used machine
 
Weight approx.: 2700 kg
Dimensions (l x w x h) approx.: 7300 x 5000 x 2400 mm
Description: Serial number 14223, The panels are moved on an air floatation table respect to the tools which are fixed, No waste of preparation time even manufacturing 1-piece batches, The machine can work the panel simultaneously from above or bellow and can produce 2 identical or mirrored panels per cycle, Total installed power approx. 20 kw, Maximum panel dimensions 3000 x 1000 x 60 mm, Minimum panel dimensions 90 x 70 x 8 mm, Same equipment from above and bellow: 1 + 1 vertical milling unit with 3.50 kw working from 7000 rpm up to 18000 rpm, 1 + 1 Saw unit working to 4500 rpm,Vertical drilling spindles: 29 + 29, Horizontal drilling spindles X-axis: 4 + 4, Horizontal drilling spindles Y-axis: 4 + 4, Software Windows/BiesseWorks, The tools that appears in the photos are included
2007
Price  
  ES   request
125922527 109

STAMA MC 540S for sale
Machining center


Machining center Stama MC 540 S including gantry robots Promot compact S-2000 Flex Information about Stama MC 540: built in 1993, travel: X/Y/Z: 550 mm / 500 mm, 2000 mm, distance spindle nose and clamping surface: 800  ...
used machine
 
Machining center Stama MC 540 S including gantry robots Promot compact S-2000 Flex
Information about Stama MC 540: built in 1993, travel: X/Y/Z: 550 mm / 500 mm, 2000 mm, distance spindle nose and clamping surface: 800 mm, clamping surface: 2500 mm x 520 mm, maximum table load: 2500 kg, tool holder: SK 40, spindle motor: nominal power: 18KW; / 1500 U /. min, max power: 22KW, nominal torque: 118Nm, Max torque: 145Nm, max speed: 6000U/min, rapid feed rate: 22 m / min, feed: 1-10.000mm/min, control: Fanuc 15 M, chip conveyor, coolant system with band filter system, CNC CNC FANUC 15 M tool changer 60-fach IKZ 4. Axis horiz. , Dividing attachment, coolant system, chip conveyor, information on gantry robots Promot compact S-2000 Flex: Stama MC 540s, reversing, washing station, workpiece storage WS14 / 30 PCs. Basic pallet, 2 x 45 kg, hydraulic, built in 1993
1993
Price  
    request
125914660 702

EKATO Behälter mit Rührwerk for sale
mixing machine, stainless steel, 350 l


dimension: d 800, h 840, total h 2220 mm\r\nmixing arm 950 rpm (d mixing tools approx. 180 mm)\r\npower: 380 V, 1,5 KW, 950 rpm\r\n

 
dimension: d 800, h 840, total h 2220 mm\r\nmixing arm 950 rpm (d mixing tools approx. 180 mm)\r\npower: 380 V, 1,5 KW, 950 rpm\r\n
 
Price  
    request
125922523 111

ZOLLER EG1800/701 for sale
Tool presetter


Main drive: 220V 50 Hz, year of manufacture: 1982
used machine
 
Main drive: 220V 50 Hz, year of manufacture: 1982
1982
Price  
    request
125914434 702

AMF Zubehör für Planetenrührmaschine for sale
accessories for planetary-mixer, fabr. AMF, type


tools: 1 whip, 1 four wing beater, 1 two wing beater (like a guitar)\r\nbowls stainless steel include trolley

 
tools: 1 whip, 1 four wing beater, 1 two wing beater (like a guitar)\r\nbowls stainless steel include trolley
 
Price  
    request
125922462 102

OKUMA LB 15 II - MC 1000 for sale
CNC Turning Machines


OKUMA lathe model LB 15 II - MC 1000 / BJ. 97 / 1000 x 530 Ã? / cnc OSP 7000 L / spindle Ã? 100 / 12 powered tools / rapid traverse 20,000 mm min. / spindle up to 4,500 rpm / tailstock Ã? 90 / spindl ...
used machine
 
OKUMA lathe model LB 15 II - MC 1000 / BJ. 97 / 1000 x 530 Ã? / cnc OSP 7000 L / spindle Ã? 100 / 12 powered tools / rapid traverse 20,000 mm min. / spindle up to 4,500 rpm / tailstock Ã? 90 / spindle hole Ã? 52 / last service 2016 (â?¬ 10,000) / good condition
Fe.gi.Maschinen.SBG.at

OKUMA lathe model LB 15 II - MC 1000 / year 97 / 1000 x 530 Ã? / cnc OSP 7000 L / spindle Ã? 100 / 12 driven tools / rapid traverse 20,000 mm. / spindle up to 4,500 rpm. / tailstock Ã? 90 / spindle bore Ã? 52 / last service 2016 (EUR 10,000) / good condition
Fe.gi.Maschinen.SBG.at
1997
Price  
    request
125914186 702

DIOSNA Wendelkneter, Fabr. Diosna for sale
wendelmixer, fabr. Diosna, type W 240 AF/T,


max. 240 kg dough, safety device\r\n foil panel/key pad (Folientastatur), 2 speeds, \r\nhydraulik fixing the bowl\r\ntools/wendlarms stainless steel\r\naccessories: scraper with temperature sensor\r\n  ...

 
max. 240 kg dough, safety device\r\n foil panel/key pad (Folientastatur), 2 speeds, \r\nhydraulik fixing the bowl\r\ntools/wendlarms stainless steel\r\naccessories: scraper with temperature sensor\r\n 2 stanless steel bowls\r\n
 
Price  
    request
125922425 301

ENGEL Victory 500/120 Plus – Tiebarl for sale
Injection molding machines


Manufacturer: Engel Model: Victory 500/120 Plus Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2004 Clamp Force (t): 120 Control System: Engel Microprocessor Lead Time: 6  ...
used machine
 
Manufacturer: Engel
Model: Victory 500/120 Plus
Viewing: Available to inspect by appointment
Condition: Refurbished with guarantee
Year: 2004
Clamp Force (t): 120
Control System: Engel Microprocessor
Lead Time: 6 weeks from order
In Production: Yes

Currently awaiting refurbishment at our workshop in Wellingborough is this 120 tonne clamp tiebarless Engel. This design of machine allows for easy tool changing and the machine can typically accomodate larger tools than other machines of the same size that have tiebars. This particular machine is fitted with a colour touchscreen controller.

Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled.
2004
25,950 £  
  UK   request
125905156 103

JOINT 2VA for sale
Unused Toolroom Mill


Weight approx.: 1000 kgx-travel: 730 mmy-travel: 320 mmz-travel: 400 mmcontrol: SINO SDS6-3V Dimensions (l x w x h) approx.: 1500 x 1400 x 2100 mmturning speed range: 70 - 4200 rpmtable surface area l x w : 1067 x 230  ...
used machine
 
Weight approx.: 1000 kg
x-travel: 730 mm
y-travel: 320 mm
z-travel: 400 mm
control: SINO SDS6-3V
Dimensions (l x w x h) approx.: 1500 x 1400 x 2100 mm
turning speed range: 70 - 4200 rpm
table surface area l x w : 1067 x 230 mm
tool taper: NT30
total power requirement: 3 kW
Description: Unused JOINT 2VA Toolroom Mill

- serial number: P080911

technical details:
- spindle diameter: 85 mm
- spindle motor: 2,2 kW
- sindle taper: NT30
- spindle travel: 127 mm
- table size: 1067 x 230 mm
- x-axis travel: 730 mm
- y-axis travel: 320 mm
- z-axis travel: 400 mm
- voltage: 380 V
- frequency: 50 Hz
- phase: 3
- net weight approx.: 1000 kg
- year of construction: 06.10.2008

control unit: SINO SDS6-V

accessories:
- comes with vice 8

- all technical informations without guarantee

- for further details see pictures
2008
used machinery auction RESALE 1,390 €  
  PL   request
125922414 301

ARBURG Allrounder 270 S-CD 250-150 for sale
Injection Moulding Machine


Mould: Axxicon CI 34 SP, closing force: 250kN, opening path: 275mm, daylight: 200mm, distance between clamping plates: 475mm, distance between tie bars: 270x270mm, tool clamping plates dimensions: 400x400mm, max. ejector ...
used machine
 
Mould: Axxicon CI 34 SP, closing force: 250kN, opening path: 275mm, daylight: 200mm, distance between clamping plates: 475mm, distance between tie bars: 270x270mm, tool clamping plates dimensions: 400x400mm, max. ejector force: 15kN, max. ejector path: 95mm, screw diameter: 30mm, max. screw path: 110mm, max. stroke volume: 78cm³, max. injector weight: 71g, max. injection pressure: 2210bar, length: 2850mm, width: 900mm, height: 1850mm, weight: 2t, including CD Replication Machine TOOLEX ODME Miniliner Plus.
1998
Price  
  DE   request
125905423 103

JOINT 3VA for sale
Unused Toolroom Mill


Weight approx.: 1300 kgx-travel: 890 mmy-travel: 405 mmz-travel: 406 mmDimensions (l x w x h) approx.: 1550 x 1400 x 2250 mmturning speed range: 70 - 4200 rpmtable surface area l x w : 1270 x 254 mmtool taper: NT30 total ...
used machine
 
Weight approx.: 1300 kg
x-travel: 890 mm
y-travel: 405 mm
z-travel: 406 mm
Dimensions (l x w x h) approx.: 1550 x 1400 x 2250 mm
turning speed range: 70 - 4200 rpm
table surface area l x w : 1270 x 254 mm
tool taper: NT30
total power requirement: 3,8 kW
Description: Unused JOINT 3VA Toolroom Mill

- serial number: P080912

technical details:
- spindle diameter: 85 mm
- spindle motor: 3,8 kW
- sindle taper: NT30
- spindle travel: 127 mm
- table size: 1270 x 254 mm
- x-axis travel: 890 mm
- y-axis travel: 405 mm
- z-axis travel: 406 mm
- voltage: 380 V
- frequency: 50 Hz
- phases: 3
- net weight approx.: 1300 kg
- year of construction: 06.10.2008

accessories:
- comes with vice 8

- all technical informations without guarantee

- for further details see pictures
2008
used machinery auction RESALE 1,490 €  
  PL   request
125922399 102

DOOSAN PUMA MX 2500 ST for sale
CNC Turning Centers


DOOSAN rotation. -Milling Center MOD. PUMA - MX 2500 ST / BJ. 2006 / 4-axis - XYZB: 555-160 - 1095 - 240 / magazine 40 / 12 powered tools / 10,000 rpm / Ã? bed 750 - sled 600 / spindle up to 360 ° in 30° cuts /  ...
used machine
 
DOOSAN rotation. -Milling Center MOD. PUMA - MX 2500 ST / BJ. 2006 / 4-axis - XYZB: 555-160 - 1095 - 240 / magazine 40 / 12 powered tools / 10,000 rpm / Ã? bed 750 - sled 600 / spindle up to 360 ° in 30° cuts / high pressure up to 70 bar / bar loader up to 1500 / Accessories: 2 Dr eibakenfutter 254 mm - 1 three-jaw Chuck 315 mm - 1 two jaw Chuck 315 mm - 60 pieces CAPTO - C 6 / March 2018 new Milling spindle bearings / good condition fe.gi.maschinen.sbg.at

DOOSAN turning - milling center mod. PUMA - MX 2500 PCs / year 2006 / 4 axles - XYZB: 555-160-1095 - 240 / magazine 40 seats / 12 driven tools / 10,000 rpm / Ã? over bed 750 - over slide 600 / uts / high pressure up to 70 bar / bar loader up to 1500 spindle up to 360 ° at 30 ° / accesso Rahman: 2 three-jaw chuck 254 mm - 1 three-jaw chuck 315 mm - 1 two-jaw chuck 315 mm - 60 pieces CAPTO - C 6 / March 2018 new milling spindle bearing / good condition
Fe.gi.Maschinen.SBG.at
2006
Price  
    request
125905436 101

JOINT VMC-1060L for sale
Unused Vertical Machining Centre


Weight approx.: 6500 kgx-travel: 1000 mmy-travel: 590 mmz-travel: 600 mmcontrol: FANUC Series Oi-MC workpiece weight: 600 kgDimensions (l x w x h) approx.: 3300 x 2500 x 2800 mmtoolchanger positions: 20 taper: BT40 turni ...
used machine
 
Weight approx.: 6500 kg
x-travel: 1000 mm
y-travel: 590 mm
z-travel: 600 mm
control: FANUC Series Oi-MC
workpiece weight: 600 kg
Dimensions (l x w x h) approx.: 3300 x 2500 x 2800 mm
toolchanger positions: 20
taper: BT40
turning speed range: 8000/12000 rpm
rapid traverse: 12 - 24 m/min
table surface area l x w : 1300 x 600 mm
Description: Unused JOINT SHENZEN JOINT INDUSTRY VMC-1060L Vertical Machining Centre

control:
- FANUC Series 0i-MC

technical details:
- table size: 1300 x 600 mm
- x-axis: 1000 mm
- y-axis: 590 mm
- z-axis: 600 mm
- max. distance between table and spindle taper: 100 - 650 mm
- max. distance between spindle and ram: 655 mm
- spindle taper: BT40
- spindle speed: 7000/8000 rpm
- feed speed: 8 m/min
- rapid feed speed x-axis: 24 m/min
- rapid feed speed y-axis: 24 m/min
- rapid feed speed z-axis: 12 m/min
- rated power of x, y, z-axis: 2,0 kW
- positioning accuracy: 0,008 mm/m
- max. load of the table: 600 kg
- machine size: 3300 x 2500 x 2800 mm
- gross weight: 6500 kg

- all technical informations without guarantee

- for further details see pictures
2008
used machinery auction RESALE 12,000 €  
  PL   request
125922393 1300

ERSA ETS 250 for sale
Wave Soldering System


Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, soldering module: lead free double wave soldering module, solder volume: 120kg, heating time: 2h, preheating length: 800mm, connected load: 8kW ...
used machine
 
Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, soldering module: lead free double wave soldering module, solder volume: 120kg, heating time: 2h, preheating length: 800mm, connected load: 8kW, length: 1980mm, width: 770mm, height: 1430mm, weight: 250kg, including tools, accessories and documentation.
2006
Price  
  DE   request
125905438 103

JOINT 5VB for sale
Unused Toolroom Mill


Weight approx.: 2100 kgx-travel: 820 mmy-travel: 425 mmz-travel: 450 mmcontrol: SINO SDS6-3V Dimensions (l x w x h) approx.: 2000 x 1700 x 2530 mmturning speed range: 80 - 3900 rpmtable surface area l x w : 1370 x 254 mm ...
used machine
 
Weight approx.: 2100 kg
x-travel: 820 mm
y-travel: 425 mm
z-travel: 450 mm
control: SINO SDS6-3V
Dimensions (l x w x h) approx.: 2000 x 1700 x 2530 mm
turning speed range: 80 - 3900 rpm
table surface area l x w : 1370 x 254 mm
tool taper: NT40
total power requirement: 5,7 kW
Description: Unused JOINT 5VB Toolroom Mill

- serial number: P080915

technical details:
- spindle diameter: 100 mm
- spindle motor: 5,7 kW
- sindle taper: NT40
- spindle travel: 127 mm
- table size: 1370 x 254 mm
- x-axis travel: 820 mm
- y-axis travel: 425 mm
- z-axis travel: 450 mm
- voltage: 380 V
- frequency: 50 Hz
- phases: 3
- net weight approx.: 2100 kg
- year of construction: 06.10.2008

control unit: SINO SDS6-3V

- all technical informations without guarantee

- for further details see pictures
2008
used machinery auction RESALE 1,800 €  
  PL   request
125922391 1300

SAMSUNG CP 20 CV for sale
Component Placer


Boad dimensions: 50-460x50-400x0.5-4mm, placement rate CHIP/ QFP: 0.37/ 0.85-1.8s/chip, length: 1450mm, width: 1540mm, height: 1408mm, weight: 1.1t, including tools, accessories and documentation.
used machine
 
Boad dimensions: 50-460x50-400x0.5-4mm, placement rate CHIP/ QFP: 0.37/ 0.85-1.8s/chip, length: 1450mm, width: 1540mm, height: 1408mm, weight: 1.1t, including tools, accessories and documentation.
2005
Price  
  DE   request
125905198 1900

STAHLGRUPPE 2017-SGG12226 for sale
Tool Trolley


Weight approx.: 70 kgDimensions (l x w x h) approx.: 970 x 780 x 460 mmDescription: Complete with tools
used machine
 
Weight approx.: 70 kg
Dimensions (l x w x h) approx.: 970 x 780 x 460 mm
Description: Complete with tools
2017
used machinery auction RESALE 550 €  
  DE   request
125922389 1009

DORSTENER Dor Compact 400 for sale
Sand-Lime Brick Press


Including table infeed, stacking conveyor, blank crusher, holding device, control cabinets, control SIEMENS Simatic S5, setting machine ATLAS, 3x blade gripper and 6x pressing tools.
used machine
 
Including table infeed, stacking conveyor, blank crusher, holding device, control cabinets, control SIEMENS Simatic S5, setting machine ATLAS, 3x blade gripper and 6x pressing tools.
 
Price  
  DE   request
125905200 1900

STAHLGRUPPE 2017-SGG12226 for sale
Tool Trolley


Weight approx.: 70 kgDimensions (l x w x h) approx.: 970 x 780 x 460 mmDescription: Complete with tools
used machine
 
Weight approx.: 70 kg
Dimensions (l x w x h) approx.: 970 x 780 x 460 mm
Description: Complete with tools
2017
used machinery auction RESALE 550 €  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(3)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Injection Moulding Machine ARBURGAllrounder 270 S-CD 250-150

Mould: Axxicon CI 34 SP, closing force: 250kN, opening path: 275mm, daylight: 200mm, distance between clamping plates: 475mm, distance between tie bars: 270x270mm, tool clamping plates dimensions: 400x400mm, max. ejector force: 15kN, max. ejector path: 95mm, screw diameter: 30mm, max. screw path: 110mm, max. stroke volume: 78cm³, max. injector weight: 71g, max. injection pressure: 2210bar, length: 2850mm, width: 900mm, height: 1850mm, weight: 2t, including CD Replication Machine TOOLEX ODME Miniliner Plus.

Wave Soldering System ERSAETS 250

Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, soldering module: lead free double wave soldering module, solder volume: 120kg, heating time: 2h, preheating length: 800mm, connected load: 8kW, length: 1980mm, width: 770mm, height: 1430mm, weight: 250kg, including tools, accessories and documentation.

Component Placer SAMSUNGCP 20 CV

Boad dimensions: 50-460x50-400x0.5-4mm, placement rate CHIP/ QFP: 0.37/ 0.85-1.8s/chip, length: 1450mm, width: 1540mm, height: 1408mm, weight: 1.1t, including tools, accessories and documentation.

Sand-Lime Brick Press DORSTENERDor Compact 400

Including table infeed, stacking conveyor, blank crusher, holding device, control cabinets, control SIEMENS Simatic S5, setting machine ATLAS, 3x blade gripper and 6x pressing tools.

Universal Tool Milling and Drilling Machine MAHOMH-C 900K

X-travel: 1000mm, y-travel: 500mm, z-travel: 650mm, control: TNC 135 Heidenhain, including 3 axis milling table.

Vertical Machining Center OKUMAMX 55 VB

X-travel: 1050mm, y-travel: 560mm, z-travel: 450mm, feed rate: 1-20000mm/min, rapid traverse: 36m/min, table dimensions: 1300x560mm, max. table load: 500kg, rotational speed: 50-6000/min, power: 4.5kW, number of tool slots: 20, tool cone: SK 50, max. tool weight: 9kg, center height: 180mm, including chip conveyor, rotary table and 70 tool cones SK 50, length: 2650mm, width: 2290mm, height: 1960mm.

Horizontal Machining Center SCHARMANNECOCUT 1.3

X-travel: 1600mm, y-travel: 1600mm, z-travel: 1000mm, W-travel: 600mm, B-travel: 360°/ 4x 90°, spindle diameter: 125mm, spindle cone: ISO 50 DIN 2079, rotational speed: 12-3000mm/min, spindle drive power: 30kW, feed rate: 1-6000mm/min, rapid traverse x, y and z-travel: 12000mm/min, rapid traverse W-travel: 6000mm/min, rapid traverse B-travel: 3.8/min, table 1/ 2 dimensions: 2x 1000x1250/ 1250x1600mm, working height: 1350mm, number of tool slots: 60, control: SIEMENS SINUMERIK System 850M.

Milling machine centers Deckel Maho GildemeisterDMC 63 V

OVERVIEW: Brand: Deckel Maho Gildemeister Model: DMC 63 V Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2000 Production hours: 33736 Location: Lithuania Origin country: Germany GENERAL DATA: Measurements width: 1860 mm Measurements depth: 2410 mm Measurements height: 2630 mm Machine weight: 4500 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 8000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 810D MOVEMENT: X-AXIS movement: 630 mm Y-AXIS movement: 500 mm Z-AXIS movement: 500 mm WORKPIECE: Workpiece x: 800 mm Workpiece y: 500 mm Workpiece weight: 500 kg TABLE: Outer length: 800 mm Outer width: 500 mm TOOLS: Max weight: 7 kg Max tool diameter: 80 mm Max tool length: 300 mm MEDIA: Main electronic connection: 400 V / 50 Hz Power consumption: 24 kVA Internal cooling: yes

Deep drawing packaging machines ILLIG -GermanForm / Fill / Sealing Machine

• Manufacturer / Type: ILLIG / FS 37 • Built in year 1993 • Products: curd cheese, other products possible however product specification required. • Output: 12.200 cups/h • Cup shape and volume : Machine prepared for rectangular shaped plastic cups of 100 x 80mm top dimensions, 2 different forming tools available for cup volumes of 250 and 500ccm. On request other cup volumes possible, however not bigger than 500ccm. • Cup materials: PS base web material, Alu / PET lidding material for cup closing • Filler: Dosing volume 200 - 500ml product hopper with sterile air overpressure, CIP/SIP prepared • Automatic Packer: included, pattern 4x3 cups / 1 layer • Automatic Tray Folding Machine included • Ink Jet Date Coding Devices included, coding onto cup bottom • Machine Inspection possible during commercial production until end of August 2018 • Spare Parts / Spare Tools included • Installation Place required approx. 110m² Photo of similar Cup Photo of the Machine Photo of Tray Folding Machine

Milling machining centres Deckel Maho GildemeisterDMC 63 V

OVERVIEW: Brand: Deckel Maho Gildemeister Model: DMC 63 V Application type: Milling Machine type: Machining Center (Vertical) Availability: Immediately Construction year: 2001 Production hours: 32683 Location: Lithuania Origin country: Germany GENERAL DATA: Measurements width: 1860 mm Measurements depth: 2410 mm Measurements height: 2630 mm Machine weight: 4500 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 8000 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 810D MOVEMENT: X-AXIS movement: 630 mm Y-AXIS movement: 500 mm Z-AXIS movement: 500 mm WORKPIECE: Workpiece x: 800 mm Workpiece y: 500 mm Workpiece weight: 500 kg TABLE: Outer length: 800 mm Outer width: 500 mm TOOLS: Max weight: 7 kg Max tool diameter: 80 mm Max tool length: 300 mm MEDIA: Main electronic connection: 400 V / 50 HZ Power consumption: 24 kVA Internal cooling: yes

Milling machining centres ChironFZ 18 S

OVERVIEW: Brand: Chiron Model: FZ 18 S Application type: Milling Machine type: Machining centers (vertical) Availability: Immediately Construction year: 1997 Production hours: 54000 Location: Croatia Origin country: Germany GENERAL DATA: Measurements width: 3550 mm Measurements depth: 3360 mm Measurements height: 3000 mm Machine weight: 5500 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 10500 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 810M MOVEMENT: X-AXIS movement: 750 mm Y-AXIS movement: 430 mm Z-AXIS movement: 425 mm TABLE: Outer length: 1150 mm Outer width: 460 mm TOOLS: Max tool diameter: 180 mm Max tool length: 220 mm MEDIA: Main electronic connection: 400 V Power consumption: 35 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Automatic Tool Changer with 20 Tool slots SK40 2 - 4th Axis rotary unit 360°

Milling machining centres ChironFZ 12 S

OVERVIEW: Brand: Chiron Model: FZ 12 S Application type: Milling Machine type: Machining centers (vertical) Availability: Immediately Construction year: 1995 Production hours: 59400 Location: Croatia Origin country: Germany GENERAL DATA: Measurements width: 2530 mm Measurements depth: 3150 mm Measurements height: 2900 mm Machine weight: 3300 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 10500 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 810M MOVEMENT: X-AXIS movement: 550 mm Y-AXIS movement: 300 mm Z-AXIS movement: 425 mm TABLE: Outer length: 950 mm Outer width: 360 mm MEDIA: Main electronic connection: 400 V Power consumption: 13 kVA Chip conveyer: yes ADDITIONAL EQUIPMENT: 1 - Automatic Tool Changer with 20 Tool slots 2 - 6x Tool holder SK30 3 - 4th Axis rotary unit 360°

Milling machining centres DONAUDANUSYS 1507

OVERVIEW: Brand: DONAU Model: DANUSYS 1507 Application type: Milling Machine type: Machining centers (vertical) Availability: Immediately Construction year: 1999 Production hours: 50000 Location: Croatia Origin country: Germany GENERAL DATA: Measurements width: 3900 mm Measurements depth: 2100 mm Measurements height: 3200 mm Machine weight: 5500 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4200 1/min CONTROL UNIT: Brand: MITSUBISHI CNC Model: MELDAS 500M MOVEMENT: X-AXIS movement: 1500 mm Y-AXIS movement: 700 mm Z-AXIS movement: 700 mm TABLE: Outer length: 1500 mm Outer width: 700 mm TOOLS: Max weight: 8 kg Max tool diameter: 80 mm Max tool length: 300 mm MEDIA: Main electronic connection: 400 Power consumption: 20 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Automatic tool changer for 16 positions SK40

RolandPractica Edelmann PZR 00 1/1

2 Color Offset machine Roland Practica Edelmann PZR 00 1/1 year: 1999 Modll PRZ 00 1/1 counter: 16 Mio. impressions with perfecting / Zylinder Feeder Mabeg Dokumentation and standart tools with HKS/Pantone colors Good Condition

Numerically Controlled Machining Centres MASTERWOODPROJECT 317

CNC WORKING CENTER - MASTERWOOD PROJECT 317 year of manufacturing 1998 CE standard No. 3 axes controlled ISO 30 electrospindle - power 9 hp - rotation from 1.000 to 24.000 rpm 4-position automatic toolchanger dilling unit with 10 vertical and 3+3 horizontal positions blade position along X axis - max blade diameter 125 mm No. 6 suction cups supports with No. 2 suction cups 160x160 mm each No. 4 back reference stops + No. 1+1 on the sides No. 4 lifting panel devices Becker vacuum pump - capacity 100 m3/h working area for milling + vertical and 4-side horizontal drilling: 2600x850 mm working area for milling + vertical drilling: 2920x950 mm vertical working area 65 mm user + electrical manuals

Sand-Lime Brick Press DORSTENERDor Compact 400

Including table infeed, stacking conveyor, blank crusher, holding device, control cabinets, control SIEMENS Simatic S5, setting machine ATLAS, 3x blade gripper and 6x pressing tools.

Automatics (Lathes) For Bars WeilerE70/3000

ADDITIONAL EQUIPMENT: 1 - 3-Jaw-Chuck "Röhm DURO 400" (w/ several jaws) 2 - Parat tool head with Sandvik C5 Tool holder 3 - Fixed brezel 200-400 mm diameter 4 - Air filter system AFS Typ 1600 5 - Chip conveyer KNOLL KF500

Milling machine centers QuaserMK 60 II H

OVERVIEW: Brand: Quaser Model: MK 60 II H Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2001 Production hours: 7500 Location: Estonia Origin country: Taiwan GENERAL DATA: Measurements width: 2700 mm Measurements depth: 4220 mm Measurements height: 3000 mm Machine weight: 12000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 10000 1/min CONTROL UNIT: Brand: FANUC Model: Series 18M MOVEMENT: X-AXIS movement: 710 mm Y-AXIS movement: 610 mm Z-AXIS movement: 610 mm WORKPIECE: Workpiece x: 800 mm Workpiece y: 200 mm Workpiece z: 500 mm TABLE: Outer length: 500 x 500 mm TOOLS: Max weight: 10 kg Max tool diameter: 100/150 mm Max tool length: 350 mm MEDIA: Main electronic connection: 400 V / 50 Hz / 3 P Power consumption: 45 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - Lifting device

Wave Soldering System ERSAETS 250

Working width: 250mm, transport angle: 4-7°, transport speed: 0.3-2.5m/min, soldering module: lead free double wave soldering module, solder volume: 120kg, heating time: 2h, preheating length: 800mm, connected load: 8kW, length: 1980mm, width: 770mm, height: 1430mm, weight: 250kg, including tools, accessories and documentation.

Get the latest machine offers by email: order newsletter