tool grinding machine used for sale

Manufacturer: Timesavers Grindingmaster Type of Machine: Grinding Machine Model: 81 series Condition: used Machine Hours: 2963,9 h Find more here - / Contact us at -

A Grindingmaster wide belt sanding and brush deburring machine is available. Working width: 900mm, max. workpiece thickness: 150mm, belt speed: 20m/min, conveyor speed: 20m/min, table height adjustment: +/-75mm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 2000kg. The sanding brushes are defective. On-site inspection is possible.

Danoflex Ø 800 mm cylindrical abrasive grinding

Danoflex Ø 800 mm cylindrical abrasive grinding Max sandingwidth: 800 mm Main motor(s) power : 4.5 kW

ID3469 Simec LM2000 – Grinding line year/Baujahr 1999 Grinding line consisting of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12) Grinding line made of: Protec tilting table, infeed conveyor table, pre-grinding machine with 4 grinding supports, warm air blower, Kirschner putty station, oven, grinding machine with 10 supports (pre-equipped for 12)

Grinding line for frozen synthesis , Karl Schnell Packed , stored in Europe, ready to ship and install Featured for US CAPACITY Capacity up to 15 000 kg/h for the fresh process Capacity up to 8 000 kg/h for the frozen process Design for three shifts-operations 6 working days/week with 16 working hours/day RAW MATERIEL All raw materials temperature between -18°C and +15°C: - Pork and chicken liver - Pork pulmon - Atum viscera - MDM Max 19 000 cp @ 0°C Content : Pos.015 KS Lifting device DM-1500 type 632 Maximum load capacity: 1500Kg Designed for frozen raw material pallets Fitted with a safety fence Safety fence secured by 2 safety light curtains Pos.020 KS Breaker PB1 type 492 Single shaft breaker for frozen raw materials pallets Maximum height for frozen pallet: 1450mm Pos.085 KS Lifting device DM-800 type 632 Maximum load capacity: 800Kg Designed for Jumbo/ ...

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

Twin Shaft shredder mod. ITS850x550E- 22 kW. Heavy duty construction. Shredding chamber dimensions 8500x550 mm with n°2 counter-rotating hexagonal shafts fitted with n°28 blades with a thickness of 30 mm, 1 hook double spaced to 60mm. Including n°1 main gearbox with straight spur gears for fast and slow shaft. Driven by n°1 x 22 kW motor The shredder is supplied complete with supporting stand, feeding hopper. The electric control panel of this shredder will be fitted with a Siemens PLC to control the working logic of the shredder including the automatic shafts reversal system in overloading conditions, a display will show the working parameters and operating conditions. The total weight of the shredder is around 3.000 Kg.

Heavy duty refurbished grinder. Very robust construction. Rotor with staggered blades. Rotor diameter 400mm rotor length 700mm. Powered by 22kW electric motor. Complete with electrical panel with Siemens touch screen panel including inverter for the control of the grinder. This electric panel can also control a loading belt, exhaust fan, etc. The control was built in 2010 for internal tests and used for less than 100 hours. As an alternative, we can also fit a new e.motor 37kW on this grinder and manufacture a new control panel for the increased power at an additional cost. This special rotor with staggered blades is also particularly suitable for heavy applications and for grinding fibrous materials and textiles

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition

faceplate diameter: 2500 mm swing diameter: 3500 mm turning height: 2000 mm faceplate speeds from - to: 100 UpM max. workpiece weight: 15 t main drive motor: 45/55 kW Control: Fanuc 18i-TB ram head dimension: 240 x 240 mm x-axis: -200 / +2950 mm z-axis: 1200 mm w-axis: 1000 mm feed range: 1 - 3000 mm/min rapid travel (x and z-axis): 1- 10000 mm/min total power requirement: - kW weight of the machine ca.: ca 70 t dimensions of the machine ca.: 10,8 x 6,95 x 7,15 m CNC vertical lathe - CNC control Fanuc 18i-TB - Face plate - 1 ram - Protective housing - Coolant system - 12-position tool changer (static tools) - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834 Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - u ...

width of the strips: 100 mm band length: 2000 mm band speed: 15/30 m/sec tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad connected load frequency: 400 V total power requirement: 2,5 /3,3 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOOLMET GATO GC-G-M-2040 oxy-fuel cutting machine was built in 2020 in Poland by Toolmet Sp. z o.o. This extremely efficient machine is an excellent choice for businesses placing emphasis on high accuracy and repeatability of the produced parts. It enables precise, 4-axis shape cutting of workpieces made of thick steel sheets. The machining process is performed fully automatically by means of a reliable gas torch according to pre-programmed cutting programmes. The work table with a length of 4000 mm and width of 2000 mm is equipped with a sectional extraction system with 6 pneumatically controlled sections. This solution effectively eliminates any contamination generated during the cutting process, ensuring a high level of safety and great user comfort. In order to guarantee smooth movements and high positioning accuracy, a lubrication-free drive system and powerful servo motors in all l ...

The Model 208B BEVELMASTER™ Air is a portable ID mounting weld end preparation machine tool for beveling, facing and counterboring 2" through 8" pipe. The tool is configured with an in-line feed knob and pneumatic drive motor at a right angle to the lathe head. The Model

CNC Vertical Turret Lathe with C axis and live tool 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Max. turning dia.: 2200 mm Max. turning height: 1800 mm Ram travel: 1500 mm Main drive: 75 kW Live spindle: 15 kW Spindle rotations: 45- 1350 1/min Max. workpiece weight: 12 000 kg Pallet changer with 3 pallets (turning plates) Tool magazine: Right: 8 turning tools Left: 8 boring/milling tools Feeds: 0,1-6000 mm/min Carriage feed: Vertical: 1500 mm Horizontal: 1320 mm Table rotation (2 ranges): 2,5 – 70 / 10-280 Max. table torque: 50 000 Nm Machine weight: 43 Ton Machine HxWxL: 6,8 m x 10 m x 9,7 m

CE standard, Cooling equipment, PLC SIEMENS S7-300, Control panel SIEMENS / CE standard, Refrigeration equipment, SIEMENS S7-300 PLC, operator panel SIEMENS, Long: 1500 mm, Higth: 1800 mm, Width: 1800 mm, Weight: 1800 kg, Total power: 2,2Kw, Ø max. gear: 250 mm, Ø min. gear: 30 mm, Wide range gear: Max 150 mm, Specification: Gear

Wide range gear: Max 150 mm, Ø max. gear: 250 mm, Ø min. gear: 30 mm, Total power: 2,2Kw, Higth: 1800 mm, Long: 1500 mm, Weight: 1800 kg, Width: 1800 mm, Specification: Gear

: gebraucht : 2890D : China : 210 € : 1 : 160 mm : 50 mm : 125 mm MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2416 B : China : 180 € : 1 : 140 mm : 50 mm : 147 mm : 15 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2889J : China : 150 € : 1 : 125 mm : 44 mm : 100 mm : 16 kg MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (Sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2012 : 9690F : prompt, Zwischenverkauf v : China : 690 € : 1 : 100 mm : 3 mm : 90 ° : 90 kg Adjustable stops on both sides Finger guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2411 : China : 120 € : 1 : 100 mm : 40 mm : 108 mm : 13 kg MINT CONDITION drilling machine vice (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2892E : China : 450 € : 1 : 125 mm : 45 mm : 100 mm : 29 kg MINT CONDITION 2 axes machine vice for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2891C : China : 250 € : 1 : 200 mm : 63 mm : 160 mm MINT CONDITION turning base for drilling-, shaping- and milling machines mechanical clamping vice bocy made of cast iron (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4 inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8 inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2 inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm  ...

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley filled Contents and equipment see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EQUIPMENT: Fully Automatic Hydraulic Tire Changer Auxiliary arms Easy installation of low-profile, wide-width tyres or run-flat tyres Large clamping range up to 30 inches Ergonomic wheel jack Integrated "Tire Booster" tire inflation system High torque power supply and electrical feedback Voltage: 230V Precise motor speed control 0-14 rpm Special attachment points for mounting tires

measuring range X-axis: 300 mm measuring range Y-axis: 290 mm measuring range Z-axis: 650 mm tool diameter: SK 50 mm Number of revolutions: 30 U/min max. workpiecediameter: 300 mm max. workpiece length: 500 mm max. workpiece weight: 40 kg accuracy +/-: 0,002 mm feeds:: Working speed: X/Y/Z: 80 mm/s dimensions of the machine ca.: 2,5 x 2,0 x 2,5 m weight of the machine ca.: 1,2 t total power requirement: 1 kVA Documents: Tool-Presetter WALTER - Heli Toolcheck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. tool trolley with tool set 272 pieces. See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

range L-W-H: 960 x 460 x 860 mm weight: 75 kg : 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4 inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8 inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2 inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm  ...

Measuring range X-axis (tool diameter) approx. 350 mm Measuring range Z-axis (tool length) approx. 400 mm max. tool weight 10 kg Tool holder/basic holder SK 50 Tool adapter SK50 to SK40 Measured value display with operating instructions/manuals

Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

Tolartois Tooling

: gebraucht : 6112A : prompt, Zwischenverkauf v : China : 110 € : 1 : 530 - 870 mm : 700 kg : 20 kg : 2 x 125 mm : 52 mm : 2 univsersal useable (band saws, circular saws, eg.) infinitely variable height adjustment perfect for round tubes, because of V-type The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Food Tools CS4AAC round cake slicer Serial: 3697 2007, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts, mobile

Food Tools CS4AAC round cake slicer Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and spare blade, mobile

liter capacity: . l total power requirement: 6900 W weight of the machine ca.: 0,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6019 : 390 € : 1 : 270 € : 40 kg : 1500 mm : 600 mm : 1000 kg : 700 - 1.000 mm MINT CONDITION 3 table elements with 6 balls each The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

9 drawers Weight: 293 kg Dimensions LxWxH: 720x725x1000mm Included content: Listing see photo

Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press