tin used for sale

Guillotine shears, FASTI type 506-10-2,5 Masch. Nr. 96-506-018 Year of manufacture 1996 Cutting length 1030 mm Cutting thickness 2.5 mm Working height 850 mm Drive power 4 kW Mains connection 400 volts, 50 Hz. - mechanical sheet metal hold-down - electric foot switch - simple backgauge 550 mm with handwheel adjustment - 2 support arms 550 mm - angle stop right 750 mm - protective housing SICK behind the machine - control cabinet fixed to the machine space requirement L x W x H 2150 x 1650 x 1400 mm weight 650 kg good condition; used

Complete Soudronic line for tin cans 50,2 mm. Include line for lids KRUPP. Speed - 500 cpm.

Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin  ...

The color shading in hardware consisting of automatic Auricolor SO tinting machine, large quantities of pasta to administer two LV-Dosing units, PC-based control unit, as well as equipment for intersections between lines. Shading equipment is made in accordance with the standards EN 50014 and EN 50016 and meets the explosion classification Eex p II T3. (The device is equipped with a fan, supply and exhaust pipes and pressure sensor to achieve a permanent vacuum supply to the pipe and well-ventilated.) 1 pack of Tinting Station LV-S18519 -contains 10 pieces 20-liter and 10 liter stainless steel tanks for 15 -the pump return 0.8 litres/min -Automatic nozzle shut-off -ohjauchoiceroniikka SA801, SA903 and SA704 2 x LV-Dosing units with frame structure -tank capacity 150 litres -pasta HL4625, 0.37 kW pump VIKING – approx. 5 l/min, Eex rated -Blade mixer helical motor, inverter ...

Forks Forks for forklifts Manufacturer Linde Type FEM4B Load capacity (pair) 10to Length 2.000mm Width 200mm Thickness approx. 70mm

Combined cut-out machine and sheet metal scissors with base ; Very good

Tincture press,St. 37,mecanical,12 l chamber,Ø 250 mm

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1000,400 mm pneumatic clamping: 4 St. moveable: Option For fast compression of Minizinken- or Softline compounds especially for larger cross-sections - Independent of the angle - Especially suitable for arched manufacturing - Table size 1000 x 400 mm - Pneumatic connection 10 bar - Air consumption 1 cdm / stroke - 4 clamping cylinders for workpiece clamping - Pairs switchable - Right half of the table supported on hardened shafts through ball linear bearings - 2 pressure cylinder for linear table displacement, separately switchable - Weight: 200 kg - CE - execution (Technical details according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Lot Fork Tines (4 pcs.) Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 300 mm, weight approx.: 150 kg

Sandwich Shapes Bread Mold Box Mold Toast Mold External dimensions: 56x30cm Internal dimensions: 12cm wide 28,5cm Long 11cm High

Forklifts, forks, forks with anti-slip coating Payload: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carrier height: 405 mm - suitable for tine holder: FEM 2 Form B - Rubber coating as anti-slip coating and for protecting transported goods ? Rocker arm lock Net weight: 145 kg mint condition, unused For a 2.5 ton. Forklift.; used

guillotine shears, sheet metal shears DIGEP type OL 3 Fabr. No. 1312 Year of construction 1977 Cutting length 1250 mm (nominal cutting length)Cutting length max. 1300 mm Cutting thickness at 450 N/mm² 3 mm single backgauge 500 mm Column projection 200 mm Cutting angle 2 Stroke rate at full cutting length max. 50 strokes/min. Working height 860 mm Motor power 2.2 kW Mains connection 380 volts, 50 Hz - LED cutting area lighting - simple backgauge with manual adjustment - Mechanical foot switch - Front angle stop left - 1 piece front sheet metal supports 300 mm Space requirement L x W x H 1660 x 1350 x 1200 mm Weight 1600 kg good condition; used

Stacking boxes, stacking boxes, steel boxes, Euro stacking boxes, , Euro stacking containers, Euro stacking containers, transport and stacking containers, material boxes, rubbish containers -Manufacturer: Schäfer, metal container material box stackable -Material: galvanized steel -Number: 18x Container available -Price per piece -Dimensions: 1000/520/H615 mm -Weight: 39 kg/pc.

Baking tray 60 x 40 cm, fits some ovens e.g. MIWE, Wiesheu, etc.

Baking tray 60 x 40 cm, brown, suitable for some ovens e.g. MIWE, Wiesheu, etc.

Complete canning line for beer - capacity 30'000 cph - 0,33 and 0,50 lt.

Mini tine milling machine LÖWER MZP1, SN. 8551, built in 1992 with milling templates in metal case ATLAS COPRO

machine measurements: H/B/T 630x418x325 mm machine weight: 30,3 kg power capacity: 240V, 50/60 Hz, 0,1 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Loaf bread plant. Year of construction: 2005-2014 Achievement: - Dough weight: box of long breads from 11,000 - 12,500 grams - Dough weight box normal: from 880 - 1180 grams - Hourly output: 3200 - 4150 loaves/h - Hourly output at 1000 grams = 3740 loaves of bread/h composed of: - Diosna Linear kneading system with 2 x Diosna W 240 A spiral mixer - Diosna lifting tipper - Benier Long Roller ME 600 - Kaak fermentation room - Kaak furnace loader - W.P. Mesh belt furnace NUN 3000/60 - Kaak furnace unloader - Kaak Auskühturm - Kaak bandage turner - Kaak Kippentkapsler - Kaak brush machine - Kaak transport system with return - GEA Freezing Spiral Freezer - Fuji High-Speed Horizontal Form-Fill-Seal Packaging year 2014

- German production - measurement of wood length - automatic cutting cycle TECHNICAL PARAMETERS: - maximum log diameter 1000 mm - maximum crane reach 9200 mm - crane operating angle 225 - 360 rotatable head - lifting capacity: 2000 mm - 2560 kg 7240 mm - 1680 kg 9200 mm - 1330 kg - dumper dimensions 6000x2150 mm - dumper with double-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic guide stroke - manual and automatic operation mode - log lifting - integrated sawdust extraction 2.2 kW - cable winding drum Transport dimensions 12.5 x 2.4 x 2.4 m weight 12,000 kg

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Steel, lever snips Tin snips with a stable base -Cutting length: approx. 325 mm -Total dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 240 x 4 mm -Transfer in current condition as seen -Dimensions: 400/150/H1200 mm -Weight: 46 kg

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 180 x 4 mm -Dimensions: 800/400/H900 mm -Weight: 60 kg

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 180 mm -Dimensions: 800/750/H1850 mm -Weight: 60 kg

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Hand lever scissors -Material thickness: max. 2 mm -Knife length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

Bread tin baking tin 4er bandage 117x15cm

Bread baking tin baking tin 117cm stick bread

Electric clutch, electromagnetic clutch for guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, eccentric press -for: guillotine scissors crank guillotine scissors -Equipment: clutch, transformer, control -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine shears -Guillotine scissors: hand guillotine scissors, solid design -Cutting width: 1030 mm -Max. Section thickness: approx. 2.0 mm -Fence depth: 550 mm, fence with removable rail -Dimension: 2250/870/H1295 mm -Transport dimension: 1670/870/H1110 mm -Weight: 414 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine -guillotine scissors: hand guillotine cutting width: 1060 mm -Type: unfortunately without type designation/cutting data -Cutting width: 1070 mm -Max. Section thickness: mm -Stop depth: 435 mm -Total dimensions: 1760/890/H900 mm -Weight: approx. 161 kg

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -hold-down: -Total dimensions: 480/210/H1360 mm -Transport dimension: 1070/210/H470 mm -Weight: 41 kg

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Hoko, scissors type HB 7 -Flat/strip iron: up to 7 mm -Sheet metal: up to 4 mm -Cutting capacity: see photo nameplate -Hold-down device: continuously adjustable -Total dimensions: 420/180/H1140 mm -Transport dimension: 920/180/H325 mm -Weight: 34 kg

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Hoko, lever scissors profile steel scissors type HB 15 -Steel sheet: up to 10 mm -Flat/band iron: up to 18 mm -Round steel: up to 20 mm -Sheet metal: up to 6 mm -mitred: 50 x 5 -Cutting capacity: see photo nameplate -hold-down: -Total dimensions: 670/200/H1670 mm -Transport dimension: 1340/200/H510 mm -Weight: 90 kg

Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears type 3R 5 -Steel sheet: up to 5 mm -Round steel: up to 13 mm -Total dimensions: 500/150/H1025 mm -Transport dimension: 850/150/H370 mm -Weight: 22kg

Hand lever snips, long blade tin and round steel snips, tin snips -Manufacturer: Peddinghaus sheet metal and round steel shears type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Knife length: 150 mm -Lever arm with: safety spring -Number: 2x lever scissors available -Price per piece -Dimensions: 275/100/H1180 mm / 280/100/H934 -Weight: 11 kg/pc.

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 200 mm -Dimensions: 350/100/H710 mm -Weight: 17.6 kg

Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm -Weight: 10 kg

Sell a press for cans and tin containers Make: Becker Pruente Built: 1984 E-engine: 4KW/ 175Bar

Genset Model C22 D5, 22kVA Standby, 20kVA Prime, X2.5G2, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X2.5G2 Engine Air Cleaner - Duty Rating : Heavy Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144D, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coo ...

C28 D5 Enclosed A044B088 Genset Model C28 D5, 27.5kVA Standby, 25kVA Prime, X2.5G2, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X2.5G2 Engine Air Cleaner - Duty Rating : Heavy Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144F, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, G ...

C33 D5 Enclosed A044B089 Genset Model C33 D5, 33kVA Standby, 30kVA Prime, X3.3G1, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X3.3G1 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144G, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% W ...

C38 D5 Enclosed A044B090 Genset Model C38 D5, 38kVA Standby, 35kVA Prime, X3.3G1, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine X3.3G1 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator PI144H, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% W ...

C44 D5 Enclosed A041C003 Genset Model C44 D5, 44kVA Standby, 40kVA Prime, S3.8G4, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire ENGINE S3.8G4 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator UC224C, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical, Flange On Connection Inlet 3 Inch, Outlet  ...

C66 D5 Enclosed A041C011 Genset Model C66 D5, 66kVA Standby, 60kVA Prime, S3.8G7, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : No Certification Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire ENGINE S3.8G7 Engine Air Cleaner - Duty Rating : Normal Duty Engine Oil Heater : None Supplied Engine Speed Governing : Mechanical Droop Governor Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator UC224F, 12 Leads, 50 Hertz (Hz), 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical, Flange On Connection Inlet 3 Inch, Outlet  ...

Ball valve Hiltbrand Rp 2" 2/2 Way ball valve with full passage max. 16 bar Female thread Rp 2" Case and ball: stainless steel 1,4408 Seal: PTFE Medium: Neutral, clean, liquid and air Medium temp.: -10°C to +115°C without autom. Default Setting time for 90°: approx. 17 sec. Case: Aluminum 230 V, 0.3 A Switch-on time: 75% Cable glands M20 Type of protection: IP67 Ambient temp: -10°C / +50° C Emergency tin: INnen sechskant Limit switch: Potential-free (on/to) The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Leaching machine 2-fold full-bodied lye curtain suitable for tin size 580 x 780 mm and 530 x 650 mm Mobile machine made of stainless steel with locking dimensions in mm (WxDxH): 840 x 840 x 1170 Park Position 1840 x 840 x 1170 (working position) optional: - Tank heating 3 kW - Ruettelsalzer - Electric preparation for later re-preparation of the salzer feed and function instruction ; ready to go!