british flag
Resale Logo

tin used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Karner & Dechow Industrie-Auktionen Ges.m.b.H.  http://www.karner-dechow.at 
banner logo
start page > keywords tin > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465371 212

HÖCKER POLYTECHNIK for sale
Mobile suction / bagging filter


Mobile suction / bagging filter HÃ?CKER POLYTECHNIK, 1.5 kW.

 
Mobile suction / bagging filter HÃ?CKER POLYTECHNIK, 1.5 kW.
 
Price  
    request
125465220 209

VECTOR Vector for sale
Vector - line for pallets, epal, euro 2004


The machine has two tables to the pallet nailing. While nailing pallets on one form of the personnel operating the machine are arranged another pallet on the second form, and so alternately. Such a system work provides f ...
used machine
 
The machine has two tables to the pallet nailing. While nailing pallets on one form of the personnel operating the machine are arranged another pallet on the second form, and so alternately. Such a system work provides full use of the machine to operate the machine are required two employees.
2004
7,700 EU?  
  PL   request
125465367 112

HOFLER PRIMA H 1000 E for sale
Gear Grinding Machines


Gear max. wheel diameter 1000 mm gear width 530 mm max. module 18 min. module 1,5 max. number of teeth 195 min. wheel diameter 300 mm
used machine
 
Gear max. wheel diameter 1000 mm
gear width 530 mm
max. module 18
min. module 1,5
max. number of teeth 195
min. wheel diameter 300 mm
1994
Price  
  FR   request
125465225 402

TS INTERNATIONAL-ITALY Entrance for sale
Line packing and inserting Entrance Syspac


The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found  ...
used machine
 
The machine worked from the news for about a year, it was later dismantled. Since then stored in a heated hall, protected from dust. Inability to install and test the machines in action. Based on visual inspection found the completeness of the device.
2009
66,600 EU?  
  PL   request
125465346 1200

DMN WESTINGHOUSE AL 200 for sale
Rotary valve


DMN Westinghouse AL 200 rotary valve Discharge and dosing valve, type AL 200 stainless steel 1.4408 (ASIS 316) Volume 5.5 ltr. / U, SEW direct drive 24 RPM / 0.55 kW / 380 V

 
DMN Westinghouse AL 200 rotary valve

Discharge and dosing valve, type AL 200 stainless steel 1.4408 (ASIS 316)
Volume 5.5 ltr. / U, SEW direct drive 24 RPM / 0.55 kW / 380 V
 
Price  
    request
125460813 105

KASTO PBA 1060-1260 U for sale
Bandsaw - Horizontal


cutting diameter: 1060 mmsaw band length: 13365 mmcutting width: 1260 mmmin. cut-off length: 10 mmcutting speed: 16-80 m/mindimensions of saw-band: 13365 x 80 x 1,6 mm: ja : total power requirement: 14,5 kWweight of the ...
used machine
 
cutting diameter: 1060 mm
saw band length: 13365 mm
cutting width: 1260 mm
min. cut-off length: 10 mm
cutting speed: 16-80 m/min
dimensions of saw-band: 13365 x 80 x 1,6 mm
: ja
:
total power requirement: 14,5 kW
weight of the machine ca.: 9,5 t
dimensions of the machine ca.: 2,76x4,24x3,1 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1994
Price  
    request
125465337 109

RESATO R - LCM 2040 - 1 for sale
Water Jet Cutting Systems


Water jet cutting machine manufacturer: Resato type: R-LCM 2040-1 year: 2007 hours of operation approximately 7,800 more data see data sheets in the folder. Contact person Mr. Mueller see also our over 200 more deals  ...
used machine
 
Water jet cutting machine manufacturer: Resato type: R-LCM 2040-1 year: 2007 hours of operation approximately 7,800 more data see data sheets in the folder.

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
2007
Price  
    request
125460786 104

WMW - BWF SI 8 S for sale
Internal Grinding Machine


internal diameter: 630 mmgrinding depth: 500 mmswing diameter: 800 mmworkpiece turning speeds: 16 - 250 U/mintotal power requirement: 21 kWweight of the machine ca.: 10,7 tdimensions of the machine ca.: 5380 x 2800 x 330 ...

 
internal diameter: 630 mm
grinding depth: 500 mm
swing diameter: 800 mm
workpiece turning speeds: 16 - 250 U/min
total power requirement: 21 kW
weight of the machine ca.: 10,7 t
dimensions of the machine ca.: 5380 x 2800 x 3300 mm
Equipment:
Four-jaw chuck, diameter 630 mm
Dresser
Coolant system with magnetic filter
Separate hydraulic system
Various internal grinding spindles.
Operating manual



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465333 303

ASB NISSEI ASB-650EXHS for sale
Stretching blowing machines


WE HAVE STRETCH BLOW MOLDING MACHINE 650EXHS WITH USED 3 MOLDS. WE SELL THEM AT ONE TIME TO THE EXPORTING ONLY. PSL. SEE IT GJCHOI OF GNB TECH IN KOREA, WE CAN SHIP IT NOW.
used machine
 
WE HAVE STRETCH BLOW MOLDING MACHINE 650EXHS WITH USED 3 MOLDS. WE SELL THEM AT ONE TIME TO THE EXPORTING ONLY.
PSL. SEE IT
GJCHOI OF GNB TECH IN KOREA, WE CAN SHIP IT NOW.
2001
Price  
  KR   request
125460789 102

MAZAK Integrex 35Y x 1500 for sale
CNC Turning- and Milling Center


turning diameter: 575 mmturning length: 1524 mmcontrol: Mazatrol T Plus total power requirement: 64 kVAweight of the machine ca.: 7,5 tdimensions of the machine ca.: mPower chuck, diameter 250 mmTool EyeChip conveyorCoo ...
used machine
 
turning diameter: 575 mm
turning length: 1524 mm
control: Mazatrol T Plus
total power requirement: 64 kVA
weight of the machine ca.: 7,5 t
dimensions of the machine ca.: m
Power chuck, diameter 250 mm
Tool Eye
Chip conveyor
Coolant system
Various tool holders
Tailstock
Various manuals / operating instructions



This ad was created with MODUL MWS - the software solution of LogoTech.
1998
Price  
    request
125465332 2444

ACHS-ANHÄNGER O3) Achleitner 2AANH5 for sale


last off Code: BH-92240 Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer Matriculation year: 14.12.1989 Test badge: no inspection sticker must be acquired by the buyer p ...

 
last off Code: BH-92240
Year of construction: 1989, vehicle was never approved, authorities must be assumed by the buyer
Matriculation year: 14.12.1989
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
FIN.: 7240
Weight/payload/total weight: 2,800/5,200/7,800 kg
Color: grey
Construction: Flatbed
Facilities: With tarp
Documentation: types of licence available
Comments to the State: rusted axles, brake system Pneumatic hoses are cracked, heavily rusted tow bar and rotating ring recording, number plate lights yellowed, rusted frame and springs, various rust and paint damage all around vehicle, div. Abrasions all around and in the vehicle, expressly pointed out is that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2330-0-200-0040
 
Price  
    request
125460772 210

SCM Method K for sale
Window production centre


Tenoning spindle: 1 St.Number of milling agregates: 5 St.Spindle diameter: 50 mm In order to sell still in useSCM METHOD K Machining center for windows and doorsTechnical specificationsMax. Working length: 2800 mm(using ...

 
Tenoning spindle: 1 St.
Number of milling agregates: 5 St.
Spindle diameter: 50 mm
In order to sell still in use

SCM METHOD K Machining center for windows and doors

Technical specifications
Max. Working length: 2800 mm
(using the stops)
minute Workpiece length: 200 mm
(clear pin dimension)
minute Workpiece height: 30 mm
Max. Workpiece height: 140 mm
Tenoning speed: 4/16 m / min
Feed rate: 3-15 m / min

Crosscut saw 4 kW with motor horizontal positioning over free
programmable axis control
Speed 3000 rpm
Saw blade diameter 400 mm, bore 80 mm
Extraction nozzle diameter 120 mm
automatic engine brake

Slotted spindle 7.5 kW with

Spindle diameter 50 mm
Spindle clamping length 620 mm
Spindle stroke under table 575 mm
Speed 3500 rpm
Max. Tool diameter 320 mm
upper bearings
Motorized vertical positioning via freely programmable axis control
automatic counter-timber beam
automatic engine brake
automatic star delta connection
Suction nozzle diameter 2 x 160 mm

1st profile spindle 5.5 kW clockwise and counterclockwise
(Synchronization) with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
automatic engine brake
Extraction nozzle diameter 150 mm

2. Profile spindle 5.5 kW clockwise with
Spindle diameter 50 mm
Spindle clamping length 320 mm
Spindle stroke under table 265 mm
Horizontal adjustment 60 mm
Spindle speed 6500 rpm.
Tool diameter min./max. 100/220 mm
Motorized vertical positioning via freely programmable axis control
Extraction nozzle diameter 150 mm
automatic engine brake

Gear milling unit 5.5 kW with
Spindle diameter 50 mm
Spindle clamping length 160 mm
Spindle stroke 100 mm
Horizontal adjustment 60 mm
Speed 6500 rpm.
Tool diameter min./max. 100/200 mm
pneumatic single stroke programmable via control
Timed horizontal feed-in for insert milling for the execution of
non-continuous grooves via CNC control
Extraction nozzle diameter 150 mm
automatic engine brake

Glass saw 2,2 kW with
Saw shaft diameter 25 mm
Saw blade diameter max. 220 mm
Saw shaft clamping length max. 22 mm
Speed 5000 rpm.
Extraction nozzle diameter 50 mm
automatic engine brake

Motorized, height-adjustable roller feed with
closest roll spacing
Motor power 1.1 kW

complete with
-CE Compliance
- Crosscut saw, tenon cutting and slot part horizontally infinitely programmable
- Slot part 620 mm spindle length, anti-clockwise
- Programmable vertical movement via ball screws
- motor-driven tapping table movement
- automatically trailing splitter wood for all slot tool positions
- Workpiece clamping for single / double wood operation with
automatic pressure drop protection
- precise swiveling tap table +/- 0 - 60 °
- Extendable telescopic length stop with automatic
Differential control, working length 2800 mm
- Programmable vertical movement via ball screw
in position 2, 3 and 4
- Horizontal positioning on manually programmable
4-fold revolver to operate from the front of the machine
for positions 3, 4 and 5
- Continuous roller feed, swiveling for light
Tool change, with additional feed roller for
Milling and motorized height adjustment according to scale
- Glass bead saw with pneumatic vertical positioning on manual
adjustable 4-fold revolver,
Forced guidance of the glass retaining strip with non-return valve, use of the
Glass bead saw automatically controlled via cycle
- automatic synchronization - immersion function of the first
Profile spindle for tear-free milling of sash frames,
Horizontal positioning on manually programmable
4-speed turret to be operated from the front of the machine
- extendable support rail for large format sash frames
- Gear milling unit with pneumatic horizontal positioning,
Use of the glass bead cutting saw via automatic cycle of the
machine program
Vertical positioning on manually programmable 4-fold turret
- CNC machine control via programmable logic controllers
electronics (PLC) type CONTROL 20
- Motor protection switches for all motors
- Operating tools, operating instructions
- Weight 3600 Kg

special accessories

Motor amplification 11 kW in Pos. 2, 3, 4

(Technical information according to the manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
3,000 €  
    request
125465323 2422

LKW N3) ÖAF Gräf & Stift 19-281 F for sale


last off Code: BH-83589 Matriculation year: 19.10.1988 elapsed. Mileage: 105.118 km : KW 206 Displacement: 11,413 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, aut ...

 
last off Code: BH-83589
Matriculation year: 19.10.1988
elapsed. Mileage: 105.118 km
: KW 206
Displacement: 11,413 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: VAO505A278F004826
Equity / total weight: 9.930/18,000 kg
Color: grey
Construction: Open box
Number of seats: 3
Equipment: Gearbox, fitted tarp, rear
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil and fuel loss, cold start Device defective, strong noise, probably massive gearbox bearing failure, stabilizer of defective rear wheel hub left front leak, air pressure er performance poorly, rusted frame , Spring cushion and Sling have game, div. differences in colour varnish, sticker residue, prov. Repainting, abrasions all around vehicle, abrasions at front bumper, div. Rust all around vehicle,
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-400-0046
 
Price  
    request
125460776 210

WEINIG Unicontrol 12 CNC - Video - for sale
Window production centre


Tenoning spindle: 2 St.Number of milling agregates: 10 St.Spindle diameter: 50 mm! MACHINE CAN BE INSPECTED DURING PRODUCTION Machine for sale in customer orders !# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindle ...

 
Tenoning spindle: 2 St.
Number of milling agregates: 10 St.
Spindle diameter: 50 mm
! MACHINE CAN BE INSPECTED DURING PRODUCTION !

! Machine for sale in customer orders !

# 6192 Weinig Unicontrol 12 CNC, with 2 tenoning spindles and Vario table
..

Specifications Summary
(Possibly more included equpment please inquire)
..


Cut-off saw
..
cut-off saw electronically, horizontally adjustable: NC axis
Number of tools: 1 pcs.
Spindle speed: 3000-6000 r / min
Spindle diameter: 40 mm
Tool clamping length: 13 mm
Tool diameter max .: 400 mm
Motor power: 3 kW
Alignment laser for detecting the cut
Displacement axial: NC-axis integrated into control
Displacement axial: 150 mm

Aggregate for edge rounding of the bottom
..
Axial adjustment along with Ablängsäge
Spindle speed: 9000 U / min
Spindle diameter: 20 mm
Tool clamping length: 25 mm
Tool diameter max .: 130 mm
Motor power: 3 kW

Length stop CNC controlled
..
Length 3500 mm
Incl. Positioned cut-off saw integrated into control

1st tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


2. tenoning spindle
..
Number of tools: variable, CNC-axis
Spindle length: 640 mm
Spindle stroke vertical: variable, CNC-axis
Spindle speed: 2800 U / min
Spindle diameter: 50 mm
Tool diameter max .: 380 mm
Engine power: 15 kW
With hydraulic tensioned outboard bearing
Complete counterprofile: Complete spindle length is countered


Vario table with horizontal NC-axis


1. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

2. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 7000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis

Grooving aggregate from above - before the final profile spindle
..
Position: horizontal top
Spindle speed: 9000 U / min
Spindle diameter: 40 mm
Spindle length: 40 mm
Engine power: 3.7 kW
Displacement axial: 30mm
Displacement radial: 125 mm
Radial clock to 8 positions by pneumatic gun
Axial adjustment with NC-axis


3. profiling spindle
..
Position: Right
Number of tools: variable, CNC-axis
Spindle length: 400 mm with counter bearing
Spindle stroke vertical: variable, CNC-axis
Spindle horizontal: variable, CNC-axis
Spindle speed: 6000 U / min
Spindle diameter: 50 mm
Tooling circle max .: 232 mm
Engine power: 11 kW
Radial adjustment: CNC axis
Axial adjustment: CNC axis


Profiling spindle - fitting spindle - at the machine end
..
Position: vertical right up
Spindle length: 160 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 210 mm
Engine power: 3.7 kW
Displacement axial: 115 mm
Displacement radial: 100 mm
Radial adjustment: CNC axis
Axial adjustment: CNC axis

grooving aggregate from top - in addition stand
..
Position: vertical right
Spindle length: 40 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 180 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 80 mm
Radial clocked to 8 positions by pneumatic gun
Axial clocked to 8 positions by pneumatic gun

Grooving aggregate from bottom side - in addition stand
..
Position: horizontal bottom
Spindle length: 125 mm
Spindle speed: 5850 U / min
Spindle diameter: 40 mm
Tooling circle max .: 200 mm
Motor power: 3 kW
Displacement axial: 100 mm
Displacement radial: 100 mm
Radial adjustment infinitely variable NC axis
Axial clocked to 8 positions by pneumatic gun


Other features
..

Online-capable
equipment for stormproofing of already pressed sashes.
That means on the machine you can do the outside profiles on single pieces or
in pressed condition
Double piece package
Return conveyor for 1-man operation: turning system with collet
Studio window equipment
Electronic angle display for angular windows
Control: PC-Nexus
NC-axis for feed height adjustment
2 axially clocked feed rollers opposite profile spindle for manufacturing
narrow and short parts
Rung leadership and shoot Supports bar
pressure lineal from side is divided in sections
Automatic central lubrication
Vario table with horizontal NC-axis


Option:
used Oertli tools in different systems for single part production (that means
customer did the outide profile of the sahes on the single piece)


techn. details according to manufacturer - without guarantee!



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465315 842  

BOBST SP 104 ER for sale
Punching machines


Centerline, cube control system, stripping station, blanking,
used machine
 
Centerline, cube control system, stripping station, blanking,
1999
Price  
    request
125460780 206

S+S Super for sale
Frame press


Working width: 4500 mmWorking height: 2500 mmNumber of cylinders: 6 St.Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mmWeight: 3.500 kgElectrohydraulic frame presser S + S Superwith automatic adjustmentCE versionFrame press  ...

 
Working width: 4500 mm
Working height: 2500 mm
Number of cylinders: 6 St.
Dimensions (L/W/H): 6.400 x 1.850 x 3.650 mm
Weight: 3.500 kg
Electrohydraulic frame presser S + S Super
with automatic adjustment

CE version

Frame press machine with 2 pieces movable presses, complete with 8 pieces
Holding cylinder for fixing frame parts, as well as with motor protection and
Control circuit breaker.

Size adjustment by optical length detection for height and width.

Working length x width: 4500 x 2500 mm

Rotating beam light curtain OTD 3

Medium pressure bar with automatic adjustment in height
up to 2500 mm high

Single pressure control for medium pressure bars

Cross-pressure device for pressing cross-bar window

Single pressure control for cross-pressure device

A triangle studio window crimping apparatus comprising:

Locking device of the vertical pressure beam
-3 push-on side-mounted pendulum pressure plates and regulators,
Central drive with single, pneumatic decoupling of the
Vertical pressure cylinder
(thereby independent of each other is the setting in any
Working height)


electrical hand control

Double pendulum plate

2 pendulum printing plates with extension (for triangular window triangle)


(Techn. Description according to manufacturer - without guarantee!)



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465306 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70539 Matriculation year: 26.09.1989 elapsed. Mileage: 82.060 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-70539
Matriculation year: 26.09.1989
elapsed. Mileage: 82.060 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114504
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3
Equipment: material equipment, cassette player, 4-speed manual transmission, all-wheel drive
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, exhaust manifold and gasket defective, gearbox leaking, clutch on the wear limit, intermediate gear leaking axle parts div. porous suspension rubbers, rear wheel bearing play, brake rusted, front discs and pads damaged, partially rusted brake line, steering gear easily leak, starter broken, heating and fresh air controller Anrostungen in frame, fenders and shock absorbers, rust spots at windscreen dawned, front left, differences in colour varnish, div. prov. Repainting, sticker residue, is pointed out explicitly that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 and 2320-0-550-0083
 
Price  
    request
125460748 105

METORA UMB 250 for sale
Band Saw


cutting diameter: 255 mmcapacity 90 degrees: square: 320 x 180 mmband speed: 22 / 76 m/mindimensions of saw-band: 3200 x 0,9 x 34 mmtotal power requirement: 1,3 kWweight: 320 kgrange L-W-H: 1840 x 830 x 1070 mmThis ad wa ...

 
cutting diameter: 255 mm
capacity 90 degrees: square: 320 x 180 mm
band speed: 22 / 76 m/min
dimensions of saw-band: 3200 x 0,9 x 34 mm
total power requirement: 1,3 kW
weight: 320 kg
range L-W-H: 1840 x 830 x 1070 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125465290 105

BEHRINGER HBP 263 A/G for sale
MITRE band saw machine


Well received. Cutting capacity at 90 ° or 75° or 60° round/flat respectively 260 or 300 x 260 mm Mitered at 45 ° round/flat 260 / 260 x 260 mm KL. / gr. Section length 10 mm/any Band saw blade dimensions 4640 x  ...
used machine
 
Well received.
Cutting capacity at 90 ° or 75° or 60° round/flat respectively 260 or 300 x 260 mm
Mitered at 45 ° round/flat 260 / 260 x 260 mm
KL. / gr. Section length 10 mm/any
Band saw blade dimensions 4640 x 34 x 1,1 mm
Cutting speed by 'Frequency 'judge' infinitely variable 14-125 m / min.
Saw motor 3 kW
Weight 2000 kg
Material height 800 mm

Accessories:
Control Panel, hydr. Spray cooling device, bundle clamping device, various band saw blades, instruction manual.
1999
Price  
    request
125460760 105

KLAEGER HK 315 for sale
Hacksaw


cutting diameter: 315 mmband length: 450 x 36 x 2,0 mmThis ad was created with MODUL MWS - the software solution of LogoTech.

 
cutting diameter: 315 mm
band length: 450 x 36 x 2,0 mm



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Bottle Sorting System MIHO Multicon-K


For detecting and sorting of up to 16 bottle types, connected load: 250VA, including roller conveyor.

Granulating mills PREVIERO MU-710 P.R.


PREVIERO GRINDER TYPE MU-710 PR complete with conveyor belt and metal detector closed rotor Grinding chamber : mm.1000 x770 Feeding hopper : 1170 mm x 900 mm 160 kW Motor 6 knives on rotor + 2 knives on stator grid with 14 mm drilling Inspection door for knives replacement Output 2000/2400 kg / h depending on material and grid Electric cabinet Offered completetely reconditioned in 2018 Construction year 1989

Casting press URPEMAK URPE CC 50


Injection molding machine for aluminium URPEMAK URPE CC 50 built in 2005 the year in Spain. Foundry machine URPE URPEMAK CC 50-parameters: -clamping force: 500 kN -Road: 260 mm -the strength of the ejector: 62.8 kN -ejector stroke: 50 mm -height (min-max): 100/325 mm -dimensions: 500 x 500 mm -distance between columns: 320 x 290 mm -diameter: 60 mm -the position of the injection: 0-50 mm -the maximum force-cast: 50 kN -diameter of piston injection: 45-50-55 mm -feed cast: 140 mm -the surface of the casting: 159-196-238 cm2 the mass/volume of injection: 91-140-188 cm3 -injection pressure: 314-254-210 daN/cm2 -the feed piston: 150 mm -motor: 11 kW -weight: 4900 kg -dimensions: ok. 407 x 225 x 220 cm

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Guillotine shears Darley GS 3110


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Casting press URPEMAK URPE CFA 330


Injection molding machine for aluminium URPEMAK URPE CFA 330 manufactured in 2008 year in Spain. The price of the machine is the crucible to melt zinc, with a capacity of approx. 400 l, visible on the last photo. Foundry machine URPE URPEMAK CFA 330-technical data: -clamping force: 3300 kN -road closure: 510 mm -the strength of the ejector: 181 kN -ejector stroke: 120 mm -height (min-max): 300/700 mm -dimensions: 910 x 910 mm -distance between columns: 572 x 572 mm -diameter: 115 mm -the position of the injection: 0-80-160 mm -the maximum force-cast: 155-350 kN -piston injection: 50-60-70-80 mm -feed cast: 445 mm -the surface of the casting: 170-1089 cm2 the mass/volume of injection: 655-943-1294-1677 cm3 -injection pressure: 308-1782 daN/cm2 -engine: 33 kW -weight: 16000 kg -machine dimensions: 700 x 270 x 290 cm

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Painting Line AEROTERM ULTRATERM UV 1100


Tunnel AEROTERM ULTRATERM UV 1100 were produced in 2002 year. The tunnel is designed to persist the paints and varnishes. It is equipped with independent air circulation, which holds the spring core at the time of the transition under the lamp. In the tunnels uses dichroic mirrors, filters, quartz and focus the rays, so drying temperature is significantly reduced. Through the use of mirrors and filters can be dry even thin films. Characteristic parameters of the tunnel AEROTERM ULTRATERM UV 1100: -working width: 1100 mm -material thickness: 0.15-50 mm -speed: 5-30 m/min. -the number of hours worked of the filaments: ok. 300 h -lamps: 6 filaments 120 W/cm (the ability to work in 60 in/cm) -fume extraction/ozone -conveyor belt on vacuum table

Plate Shear BEYELER C 4100 x 6


Cutting length: 4100mm, max. sheet strength: 12mm.

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Horizontal Band Saw MEBA 407 A


Clamping surface diameter: 390mm, saw band length: 5120mm, cutting speed: 15-150m/min, clamping height: 10-407mm, clamping width: 10-407mm, cutting range: 407x407mm, cutting range round: 407mm, lowering speed: 0-300mm/min, length: 1400mm, width: 2500mm, height: 2000mm, weight: 3.5t.

Zirkon Supra 660


Zirkon Model Supra 660 4 color Year: 1990 Cutoff: 452mm Max speed: 42.000 p/h 1 Enkel reel stand with reel travers 1 Infeed with web guide control 4 Zirkon printing-units with Baldwin alcohol damping and Baldwin blanketwashing 1 Dryer MEG Sigma plus year: 1997 1 Chillstand with webguide and silicon 1 JIMEK Perforater unit 1 superstructure with turnerbars and slitting knives 2 Zirkon folders with one chopper folder and one double chopper 1 Planatol gluing system even crossgluing Bcdjekyxh3 1 Quadtech RGS 4 register controll 1 Quadtech cutoff control 2 Gämmerler trimming RS 92 2 Gämmerler bumpturn 1 IVT tempcontrol ink vibrator, chill roller, alcohol mixer 1 IVT ink distrubition with 4 pumps for ink container connection 2 Color Control pults remote ink 1 Machine Controll pult 1 plate bench and punch Full documention: electrical,mechanical and other manuals! Perfect for 8 page A4 or 16 page A5! Single production or double production 4 page A4 or 8 page A5. We ship worldwide.

Laser Cutting Machines Bystronic Bystar 3015


Type || CO2 Laser Cutter Manufacturer || Bystronic Model || Bystar 3015 Year of Manufacturing || 2000 Serial Number || K990418 Weight 6000 kg | |

HEIDELBERG SM52-2


D235 HEIDELBERG SM52-2 (Year 1997) Alcolor dampening / Autoplate / Automatic wash-up equipment / Automatic size setting from feeder / App. 35 mio. Impressions Machine is in very good working condition. Available: Immediately

Laser Cutting Machines Amada FO 4020


Type || CO2 Laser Cutter Manufacturer || Amada Model || FO 4020 Year of Manufacturing || 2005 Serial Number || 37004247 Length | mm | 7500 Width | mm | 3200 Height | mm | 2400 Weight 1400 kg | | Electrical || 400 v, 50 Hz Available for Delivery || Immideatly

Furnaces Naber 2,2 m3


Selling rarely used Naber furnace. Max. heating temperature 1340 C; Outer dimmensions - 3200(L)x1700(W)x2200(H). Power supply - 120 kW. Furnace is in good condition, just new controler and clamps should be installed.

Grit blasting cabin diverse


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Guillotine shears Safan HVS310-13 / 16


Auction name: Bankruptcy F. van Dam Exploitatie B.V. in Vlaardingen Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 28 May 2018 16:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Tube Bending Machines SCHWARZE WIRTZ PERFEKT WE 100 D T870


Bender socket key SCHWARZE WIRTZ PERFEKT in 100 D T870 built in 1975. Hydraulic bending machine for tubes with electro-hydraulic control system, as well as with pressure device sliding Rails and with hydraulic mandrel drawing inferences is intended primarily for tube bending with mandrel. Specific data: -maximum capacity: 114 mm tube diameter x 6.3 mm wall thickness (for maximum tensile strength 45 kp/mm2) -maximum torque resistance: 55 cc -minimum pipe diameter: 22 mm -the maximum bending radius: 500 mm -minimum bending radius: 50 mm -the maximum bending angle: 180 degrees -the length of the plate shaft steady rest: 4000 mm -bending direction: right -the maximum bend speed, running forward: 0-3.25 RPM continuous adjustment -the maximum bend speed, running back: 5.4 RPM. constant -main motor power: 22 kW -total power requirement: 25 kW Equipment for bending SCHWARZE WIRTZ PERFEKT in 100 D T870: -hydraulic bending with mandrel -traffic control creep -automatically select angle -the length limiter system with 4 fingers przyporowymi -mandrels to sections: 20 PCs. -dies holding the pipe bending: 16 PCs.

Radial Drilling Machines Z 3050 X 16


Radial drilling machine with 3050 X 16 was built in 1989. This versatile general-purpose machine. It is suitable for drilling, countersinking, reaming, chamfering and thread cutting medium and large items. With the right equipment it is also possible to boring. Technical data drilling machine Z3050 X 16: -the maximum drilling diameter: 50 mm maximum range: 1600 mm -the maximum distance between the axis of the spindle and the column: 1600 mm -the minimum distance between the spindle axis and column: 350 mm -horizontal spindle head on your shoulder: 1250 mm -maximum distance from spindle face to the working surface of the base plate: 1220 mm (1250 mm) -minimum distance from spindle to base plate working surface: 320 mm (350 mm) -vertical stroke in column: 580 mm -arm lifting speed: 0.02 m/sec. -angle of rotation of the arm: 360 degrees -taper in the spindle: Morsea Nr. 5 -spindle speed range: 25-2000 RPM. -number of spindle speeds: 16 PCs. -feed range: 0.04-3.2 mm/Rev. -the amount of feeds: 16 PCs. -extension: 315 mm -depth of feed per rotation of graduated: 122.5 mm -maximum permitted torque on the spindle: 490 Nm -maximum permitted weight spindle: 15680 N -the power of main motor: 4 kW -engine power lifting arm: 1.5 kW -engine power the hydraulic lock: 0.75 kW -Coolant pump motor power: 0.09 kW -overall dimensions (l x w x h): 2500 x 1060 x 2655 mm -weight of the machine: ok. 3500 kg (3900 kg with a column guide)

Plasma cutter ECKERT JANTAR 2


Plasma cutter ECKERT JANTAR 2 was built in 2008. The basic technical data cutting ECKERT JANTAR 2:-working width with 2 suportach burners: 2000 mm -cutting length: 6000 mm -the length of the road: 5000 mm -passage speed: 0-20000 mm/min. -cutting thickness (with one burner HARRIS): 100 mm -the type of flammable gas: propane, acetylene, APACHI, natural gas -format programming: ESSI -positioning accuracy: 0.05 mm -supply voltage: 50 Hz/230V/+-5% Part of the basic equipment cutting device JANTAR-2 includes: -computer control system CNC ECS 859:1 PCs. -torch cutting nozzles HARRIS: set of 3/palnik -Central gas Splitter: 1 PCs. -beam portal with guides on the gas hoses and electric cables: 1 set. -the longitudinal rails made of roadway (2000 mm cutting workspace): 1 set. -drive unit wzd?u?my (double-sided): 1 set. -drive unit: 1 set.

Refrigerating machines Eco refrigerazione IDE 43B10 ED


Description Eco Brand Refrigerazione IDE 43B10 model ED ID 555804 Status Active Price €2,000 + VAT Year of manufacture 2007 Location Bucharest, Romania/Bucharest (RO) Dual discharge industrial unit coolers Eco IDE 43B10 ED manufactured in 2007, recommended for applications in large cold rooms and refrigerated storerooms. Maximum air flow: 12300 m3/h, air throw: 2 x 14 m, heat exchange surface (ext./ext.): 83 m2, 3 fans (450 mm), electronic defrost (1500W). Lowest temperature: 35oC. ExWorks. Price is negotiable. Contact Tel.: + 359/40-175.575 Fax: + 40-259/426.248 Mobile: + 40-743/177.040; + 40-740/221.698 Technical inspection can be organized at least 24 hrs before the due dates We speak English. WIR sprechen Deutsch. (+ 40-740/221.698) Hablamos Español. Beszélünk magyarul. (+ 40 743/177.040) Irrtum und Zwischenverkauf vorbehalten, Anderungen/ Subject to errors, changes and prior to his/ We reserve the right to mistakes, changes and prior sale.

Eccentric Presses SMERAL LENP 40 A


Eccentric press SMERAL PRESSES OFFERING LENP 40 and was produced by the machine manufacturer SMERAL PRESSES OFFERING. Machine SMERAL PRESSES OFFERING LENP 40 and was built in 1977. Technical parameters of the press SMERAL PRESSES OFFERING LENP 40 and: -maximum pressure: 40 t -outreach: 220 mm -the range of adjustment stroke: 8-90 mm -adjustment range slider: 60 mm -the gap between the slider and a table with a maximum of spring, in the lower turning point on the wykr?conym a: 250 mm -between the walls of the body: 250 mm -lower table: 630 x 430 mm -bore in a slider-diameter/height: 40/75 mm -the maximum number of strokes per minute slider (continuous operation): 67 1/min -the number of possible jumps-the largest number of individual jumping: 60 1/min -the minimum length of the pitch slider: 8 mm -maximum length of the pitch slider: 90 mm -pitch fastening grooves: 280 mm -the dimensions of grooves in the table: 22 x 38 x 16 x 27 mm -the dimensions of grooves in the disc table: 22 x 37 x 16 x 27 mm mounting holes diameter/distance mounting holes: 24/200/580 degrees -draft: 28 degrees -mounting plate thickness: 60 mm -through hole in mounting plate: 200/220 mm -through hole in the interface plate/height weaning: 100/20 mm -main motor power: 3 kW (1420 RPM) -air consumption for one include: 4 l -basic power supply: 3 x 380/220 V 50/60 Hz -dimensions (l x w x h): 1080 x 1530 x 2110 mm -weight of the machine: 2480 kg Eccentric presses equipment SMERAL PRESSES OFFERING LENP 40A: -an intermediate table -foot control -set covers -DTR (technical motor)

Water Jet Cutting Machines Bystronic ByJet Pro 3015


Waterjet Bystronic ByJet Pro 3015 from year 2008, was built by the renowned Swiss manufacturer of Bystronic Laser AG. Technical data: -table size: 1500x3000 mm-number: 58.805 h-two cutting heads-maximum pressure: 3600 bar -software: ByVision p. 8004C-ByPump 50 APC water cutting machine Bystronic ByJet Pro 3015 worked under the supervision of the service. The last time the machine listed hydraulic seals.

Double screw-type extruding machine FANGTAI FT 500-2


Twin-screw FANGTAI FT 500-2 produced in 1998 year. The machine has one screw diameter fi 50 mm and one snail with a diameter of 65 mm. Technical parameters of the machine screw diameter fi 50 mm: -screw diameter: fi 50 mm -L/D ratio of length to diameter of the cochlea: 28:1 -screw speed: 10-120 RPM -foil width: 200-550 mm -film thickness: 0.015-0.04 mm -main engine power: 7.5 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 2.8 t -dimensions (l x w x h): 5600 x 2600 x 1800 mm3 Technical parameters of the machine screw diameter fi 65 mm: -screw diameter: fi 65 mm -L/D ratio of length to diameter of the cochlea: 30:1 -screw speed: 10-120 RPM -foil width: 200-650 mm -film thickness: 0.015-0.04 mm -main engine power: 15 kw -heating power: 30 kw -capacity: 50-100 kg/h. -weight: 3 t -dimensions (l x w x h): 6000 x 1500 x 2500 mm3

Grid production line MASZYNY S.C. LS 6/4


Line for manufacturing of grid forest MACHINE S.C. LS 6/4 was produced in 2006. Characteristic parameters of the line to the netting machine S.C. LS 6/4: -ability to produce L-type grids; M; S Construction grid for type "L": -on the machine so far carried out configurations: 150/14/15 L; 160/20/15 L; 160/23/15 L; 180/20/15 L; 180/23/15 L -wires: fi. 2.0 mm/1.6 mm -maximum height: H = 200 cm The design of the grid for the type "M": -on the machine so far carried out configurations: 120/13/30 M; 120/13/15 M; 160/15/15 M; 160/15/30 M; 160/20/15 m; 160/20/30 m; 160/23/15 m; 160/23/30; 200/17/30 m; 200/17/15 m; 200/22/15 m; 200/22/30; 200/25/15 m; 200/25/30 m -wires: fi. 2.5 mm/2.0 mm -maximum height: H = 200 cm Construction grid for type "S": -on the machine so far carried out configurations: 120/13/15 S; 200/17/15 S; 200/20/15 S; 200/22/15 S; -wires: fi. 3.0 mm/2.5 mm -maximum height: H = 200 cm-capacity: depends on the type of mesh-medium: 4 rolls/h -the line is complete: the machine, line-construction growing, bucks on vertebrae wire snap-in-staple gun (binding end of the grid to roll), compressor

Welding Rotary Tilting Tables ABB IRBP 750 K


Welding rotary table ABB IRBP 750 K, 3,15 mts long, very good working condition!

Eccentric Presses TOMA LEN 63C


Eccentric press TOM LEN 63 c was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser. Technical parameters of the presses LEN 63 C: -clamping force: 63 tons -table size: 800 x 630 mm -the surface of the slider: 450 x 280 mm -outreach: 315 mm -the number of jumps in: 65/130 min. -number of jumping manual work: 45/50 min. -adjust the pitch slider: 10-105 mm -the self-alignment capacity of slider: 70 mm -ground clearance table-slider: 335 mm -the ground clearance between columns: 355 mm -quantity: 2 -engine: 730/1440 min. -engine power: 4/7.5 kW -overall dimensions: 1425 x 1790 x 2550 mm -weight of the machine: 5850 kg Advantages of the press TOM LEN 63 C: -die-cast housing: grey cast iron -the possibility of setting the size of the pitch slider -the possibility of repositioning the slider -pneumatic balancing slider -accurate, extended, self-lubricating guiding slider -eccentric shaft fit rolling rod -molded friction clutch: brake, meeting the requirements of the provisions of safety at work

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Eccentric Presses SMERAL TRNAVA LEN 40 C


Eccentric press SMERAL PRESSES OFFERING TRNAVA LEN 40 C produced in 1985 year in Czechoslovakia. Press-specific data LEN 40 c: -pressure: 40 tons -table surface: 660 x 530 mm -the surface of the slider: 400 x 250 mm -outreach: 265 mm -the distance between the table and the slider: 295 mm -the size of the adjustment between the table and the slider: 80 mm -the number of jumps the slider with continuous movement: 70 or the 142 ppm -number of jumping individual: 50/min -adjustable pitch slider: 8-95 mm -pneumatic coupling, min. air pressure: 0.4 MPa -motor power: 3/4 kW -overall dimensions (l x w x h): 1585 x 1245 x 2370 mm -weight: 4500 kg

Automatic hydraulic press PAWN 100 G


Hydraulic automatic PAWN 100 G was built in 1991 by HYDOMAT-Warsaw, Poland. Technical parameters of the press PAWN 100 G: -nominal pressure: 100 t Jump Mobile disc: 0-70 mm -number of jumps the disc movement.: 10-60 l/min. -maximum operating pressure: 22.5 MPa -maximum pressure: 4 MPa -installed power: 29 kW -the weight of the press: 5930 kg

CNC Plasma Cutting Machines MACCHINA TAGLIO PLASMA REDCOM


REDCOM PLASMA CUTTING MACHINE MAKE MODEL YEAR 2008 Redcom EVL 25 18 Modular double Plasma cutting torch, with stock drilling tools. Measurements: 18 x 2.5 mt Hypertherm HPR260 HSD130 models with torches and Generator CNC ESA/GV Datasheet available in the documents section For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

FORNO PER FUSIONE Marconi


MELTING FURNACE MARCONI 14 RR MODEL YEAR 1999 Marconi BRAND Melting furnace Marconi; automatic metal loader hydraulic controls; capacity 1400 kg; Double burner; wait 1 and 1; 2 wells; side discharge and cleaning; gas powered for more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

PRESSA PER PRESSOFUSIONE Italpresse


ISOLA CASTING ITALPRESSE BRAND Italpresse The MODEL 300 YEAR 1974 Horizontal press for die casting with charger and Lubricator Datasheet Closing power 350 Ton Max power injection 40 Ton Central extraction power 18 Ton Max height 750 mm moulds Minimum height 250 mm moulds Stroke 130 mm 500 mm stroke central extraction platen 960x960 plans size mm Distance within the columns 580x580 mm motor power 18.5 Kw Printable area max 400 cm2 metal pressure Kg/cm2 845 total weight of 14.8 Tons press overall dimensions 1450x6100x1900 h mm For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

FORNO PER FUSIONE Marconi


ALUMINUM MELTING FURNACE BRAND Marconi MODEL RR14 1680/00 YEAR 2000 Technical Data: Kcal/hour 280000 Temp. Max 999 C° Gas supply For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

BYSTRONIC bystar


Bystronic Bystar 4025 12 meter 6kw Manufacture: Bystronic Type: Bystronic Bystar 4025 12 meter 6kw YOM 2007 Laser on Hours 30,540 Laser working hours 15,809 Sheet Size XYZ 4000mm x 2500 x 150 mm Thickness of Cutting Material Mild Steel - 25MM Stainless Steel -25MM Aluminium - 15MM Power Output 6000 Watts Cutting Heads 7.5” & 5” Comes with Auto change tables, extractor and chiller. Price: Machine Price Ex Works 200.000 euros EX WORKS GERMANY

Guillotine Shears STROJARNE PIESOK NTC 2500/4


Guillotine STROJARNE PIESOK NTC 2500/4 produced in 1986 year in Czechoslovakia. The data characteristic guillotine Strojarne Piesok NTC 4 x 2500: -the minimum thickness of cut metal plate: 0.6 mm-maximum thickness of cut metal plate (Rm = 450 MPa): 4 mm-maximum width of cut metal plate: 2500 mm -cutting angle: 1 ' 33 Grad-cutting angle: adjustable -outreach-stand: 200 mm -adjustment range rear bumper: 4-750 mm-main drive motor power: 4 kW -engine power rear bumper: 0.25 kW -infeed bumpers:-dimensions (l x w x h): 3100 x 1600 x 1500 mm-weight: 3800 kg

Hob milling machines STANKOIMPORT 53A30P


Hobbes STANKOIMPORT 53A30P built in 1993. Technical parameters of the milling STANKOIMPORT 53A30P: -maximum cutting diameter: 320 mm -milling length: 220 mm -Max. module: 6 mm -the maximum tilt angle: +/-60 ° -the maximum cutter diameter: 160 mm -overall dimensions: 2300 x 1300 x 1950 mm -weight: 6000 kg

Traveling column milling machine MECOF CS 88 MT


1995 bi-rotary head control SELCA 1200 Racing: X 6200mm; · Y 1000 mm; Z 1800mm (turning his head 2100 mm) N 2 teams N 2 cubic N 1 divider continuously N 1 head D 'ANDREA from Ø100mm to Ø250 mm N 1 head D 'ANDREA from Ø250mm to Ø700 mm N 50 taper to milling cutters, boring tools and drills N 25 cutters from Ø 40mm to Ø250 mm

Fresalesatrice FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

Bed milling machine floor type FPT LEM M60


Technical data Running Long. 6000 mm. 1200 Trasv.mm race. Corsa 2000 Vert.mm. Working feeds 6000 mm/min. Rapid feeds 15000 mm/min. Motor power mand. 22 kW. Spindle speed 3000 rpm. Total installed power KW. 57 Data not binding to obtain/verify Date must be Standard equipment CNC HEIDENHAIN TNC 426 C. Auto Tools 40 pos. Auto dual-rotating head 2.5° x 2 .5° Anchor plans mm. diameter 1500x6000

CNC Laser Cutting Machines TRUMPF TRUMATIC 260 ROTATION


Notching machine TRUMPF TRUMATIC 260 ROTATION was produced in 1987. Included with the machine set of tools. The data characteristic of CNC TRUMPF TRUMATIC 260 ROTATION: -punching: 25 T -the scope of the work area: 1300 x 2500 mm + reposition -maximum sheet thickness: 6.4 mm -maximum weight of workpiece: 150 kg -the maximum diameter: 76.2 mm -the maximum working speed, the X and Y axes at the same time: 108 m/min. -the maximum working speed, the X axis: 90 m/min. -maximum speed, Y axis: 60 m/min. -the maximum speed of the tool rotation, C-axis: 3600/sec. -the maximum number of strokes: 500/min. -the number of tools in magazine: 10 PCs. -tool changing time: 6.5 seconds.

CNC Bending Presses EHT EHPS 11-35


CNC press brake EHT EHPS 11-35 was produced in 1992. Characteristic parameters of CNC presses EHT EHPS 110-3550: -CNC control -maximum pressure: 110 t -maximum length of bending: 3550 mm -maximum length of the pitch slider: 200 mm -the distance between the walls of the body: 3050 mm -outreach: 350 mm -maximum speed bending: 13 mm/s -the maximum distance between a slider and a dining table: 460 mm -the minimum distance between a slider and a dining table: 260 mm -speed: 130 mm/sec. -return speed: 138 mm/sec. -the distance between the bumper: 5-1000 mm -bumper speed: 250 mm/sec. -the height of the bumper over the table: 100-200 mm -a safety distance between the tool and support elements: 128 mm -stop time: 79 ms -the road stopping: 11.3 mm -power of the main engine Y1 + Y2:15 kW -the stopping of the bumper X: 3 Nm -maximum pressure in the hydraulic system: 280 bar -maximum air pressure: 6 bar -oil capacity: 390 l -type of oil: HLPD 46 -operating voltage: three-phase 380 V, 50 Hz -control voltage: 24 V -the total connected load: 21.5 kW -the total rated current: 42 Amp. -maximum switching current: 63 Amp. -machine weight: 9500 kg

Cooking cupboards Meyn Fryer BR5000/400


1 x Meyn fryer. Type - BR5000/400. 400mm wide belt. Frying length - 5000mm. Comes with hold down belt, hydraulic lifting for belts and cover, MC control, thermo-oil heated, oil tank and fire-fighting equipment. Located in Germany.

Hob milling machines BARBER COLMAN AEDA 27-7


Hobbes BARBER COLMAN AEDA 27-7 produced in 1989. Milling machine to machine the wheel teeth straight and slanted. Technical data routing, BARBER COLMAN AEDA 27-7: -module: 1 mm-max. module: 10 mm -the maximum diameter of the wheel: 360 mm -distance from the catch of centres: 1000 mm -overall dimensions of the machine (w x l x h): 900 x 2600 x 2200 mm -weight: ok. 4.5 tons

PRESSA PER PRESSOFUSIONE IDRA


PRESSES for DIE CASTING HYDRA Hydra BRAND MODEL OL 220 PRP YEAR 1995 DESCRIPTION Horizontal press for die casting included STP brand charger Datasheet Closing power 2450 KN Max power injection central extraction Power 180 285 KN KN Max height 550 mm minimum height 180 mm moulds molds 500 mm Race racing mobile plan measures Central ejection stroke 100 mm Dimension 765x765 mm Distance plans within the columns 500x500mm Engine power: 22 Kw total weight 10.2 press Ton 1592x5320x2293 h overall dimensions mm for more details and vision of machinery call us at + 39 030 725026 Monday through Friday from 8:30 19:00 13:00 and 14:00 hours at at

Wire Cutting Spark Erosion Machine Tools AGIE CHARMILLES CNC CF20


Wire cutting machine AGIE CHARMILLES CNC CF20 manufactured in 2007. Technical parameters of the cutting machine AGIE CHARMILLES CNC CF 20: -table size: 740 x 400 mm -table travel Yxxxz: 350 x 250 x 220 mm -weight: 2100 kg

Circular Sawing Automatics Abcd Machinery AUTOCUT550


AUTOCUT 550 Automatic sawing machine with automatic feeding for cutting at 90°. Equipped with automatic feeding system fitted with Brushless moter driven by numerical control “touch screen”. Bar-end detection device. Clamping of the bar by “bridge” system. Possibility to load and save cutting lists in CSV format with USB and ETHERNET connectivity. Spray mist lubrication (Venturi). Threephase motor 5,5KW.

Circular Sawing Automatics Elumatec SA73


Automatic saw SA 73/36 Description Suitable for high-volume cutting of aluminium profiles for window manufacturing and industrial applications Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system One, two or three-stroke feed can be selected using a selector switch Reliable material feed using two horizontal clamping cylinders Automatic machine shut-down at the end of the profile Pulsed coolant system Equipped with saw blade as standard Technical specifications Cutting range 150 x 110 mm Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Compressed air supply 7 bar Air consumption per working cycle 19 l without spraying, 31 l with spraying Length 1,500 mm, depth 1,100 mm, height 1,550 mm, weight 290 kg Feed distance per cycle 5 – 250 mm (up to three cycles possible)
Find used machinery dealers in your country