tin used for sale

Used shrink capsule capper NORTAN, Type: UNICAP 35 Built-In: 2000 Suitable for capping of capsules in tinfoil, aluminium or thermo capsules. - complete equipped - with capsule supply table - feed in screw - format parts for 1 l and 0,75 l bottles available - Capacity : maximum 2.500 bottles/h - controlling for capper and heating shrink bowl installed Condition: very good, ready for operation. An inspection is possible at every time.

CNC – controlled frame gluing press for automatic gluing of all frame constructions with dowel connection – tine connection – 45° miter connection, automatic centering of the press plates and the upper press beam. The frame presses are available in the following sizes – pressing area 3,000 x 1,700 mm – 3,000 x 2,000 mm and 3,500 x 2,500 mm. Two vertical press cylinders – pressing force per cylinder 7 tons (optional four vertical press cylinders). Two horizontal press cylinders, stroke range 150 mm - pressing force per cylinder 3 tons. Maximum tread depth 130 mm (larger tread depths on request). CNC control from SIEMENS® with touch screen for calling up three automatic pressing cycles, 99 compression programs can be stored per pressing cycle. Among other things, the following parameters can be programmed: frame size, frame profile structure, pressing time, pr ...

Gluing stand VHS with motor hydraulics for gluing all frame constructions with dowel connection – tine connection – 45° miter connection. The motor-hydraulic gluing stands VHS are available in the following sizes: Maximum grouting range 2,500 x 1,800 mm 2,500 x 2,100 mm 3,000 x 1,800 mm 3,000 x 2,100 mm 3,500 x 2,100 mm Three vertical press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each. Two horizontal press cylinders with a stroke range of 120 mm and a pressing force of 2 tons each (optionally, the gluing stands can of course be supplied with more press cylinders). Drive power 0.75 to 1.25 kW.

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...

Finger jointing lines >Wood input lengths 900-6100 mm < >Wood rests the tools move < >availability very high < The only package system in the world that can also process a single board or individual beams. Finger jointing line for vertical and horizontal milling, tine profiles, together with new developments in the clamping stations and the transfer channel on the milling carriage, the MINDA MACH I has the following groundbreaking advantages, high cycle rate, together with 1200 mm milling channel at 40 mm wood thickness running meter capacity approx. 150 running meters / min, very reliable material transport - no fault-prone conveyor rollers, flaps and cross conveyor sections - very high availability - for all cross-sections incl. square suitable - through fully automatic, continuous channel adaptation, single wood milling is possible in extreme cases - this makes the system extremely ...

Forklift attachments Snow sliders with rubber scrapers Quick pick-up with the fork tines Clearing shield 2-fold to the left and right adjustable Spring folding hatches and scraper screwed on Securing against unintentional slipping Shield width: approx. 2000 mm Shield height: approx. 400 mm Fork cross section: approx. 120 x 50 mm Fork distance: approx. 540 mm All information without guarantee

Wedge tine plant Scharpf and Kögel - milling machine with threshing table wide 800 mm - manual handover - press 6000 mm

WEINIG / GreCon Short Wood Finger-jointing Line Ultra TT Data of the system: • Wood inlet length (min. - max.) 150 - 1000 mm (1300 mm) • Reference timber inlet length at the finger-jointing line 400 mm • The length of the wood to be processed must be at least 25 percent longer than the width of the wood to be processed • Wood thickness (min. - max.) 20 - 80 mm • Reference wood thickness 28 mm • Wood width (min. - max.) 40 - 205 mm • Reference wood width 90 mm • Reference wood cross-section 28 mm x 90 mm • Wood outlet length (min. - max.) 3000 - 6100 mm • Reference wood outlet length 6100 mm • Tine profile (length) 10 – 11 mm • Max. wood cross-section for processing softwoods (with specified tine length) 100 cm² • Max. wood cross-section for processing hardwoods (with specified tine length) 80 cm² • Glue type PVAC • Species: Softwood / ...

Würschum semi-automatic 4-fold filling line Pneumatic filling machine with four filling stations For liquid and viscous products The filling machine has a pneumatic drive for the linear movement of the dosing piston in the stainless steel cylinder. Limit switches define very precisely the volume that the dosing piston sucks in. The dosing volume is set manually with a milliliter scale and a handwheel. This model requires only a compressed air connection, electricity is not required. The suction and dosing speed can be adjusted to the product viscosity by means of throttle valves. With an optional pneumatic manual screwdriver, the containers can be closed immediately after filling. The machine table can be rolled and can be moved to another room for cleaning after the end of production. Applications: Production and Laboratory Chemical industry Cosmetics i ...

Riding track planner, riding area planner, railway planner / Tennenplatz care equipment, working width approx. 1.80 m, consisting of three-point mounting frame with 2 rows of adjustable double spring tines, height-adjustable equalizing shield and screwed wear rail (steel 10x80 mm) and adjustable lattice roller (diameter approx. 400 mm) with cushioned scraper.

Fraesmotoren PERSKE suitable for dimter HK 200 + HK400 + HK800 Milling motor, motor for tine cutters 400 Volt 50 Hz 2880 rpm State ready for use

-Load capacity: adjustable from 600 – 3000 kg -Effective height : from 1300 – 2000 mm -Tine length : 1000 mm Fvmfedlvq -Tine cross-section : 120 x 50 mm -Total height: 1720 – 2420 mm -Net weight : 260 kg These crane forks are equipped with adjustable tines, height adjustment and automatic weight compensation. In the case of self-balancing forks, the support tines tilt upwards when the load is lifted. This prevents the load from slipping out unintentionally. The suspension eyelet is movably mounted via a subframe. The automatic self-balancing is carried out by a gas pressure spring when the fork is loaded. This ensures that the suspension point is always in the centre of gravity of the fork and that the load picked up is transported absolutely safely.

Clamping cylinder suitable for wedge tine press

spare parts - cook bolinders - glue application with gluing combs Ccmealplm For adhesive application on compact wedge zinc systems (compact wedge zinc machine ) Praezisions glue comb system with working width max. 250 mm, 2 tine laenia 15 mm or alternatively 20 mm

Drying tunnel,stainless steel,Tinofix type 725

working width: 4700 mm Number of rotors: 1 St Tine arms per rotor: 16 St The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures  ...

working width: 3 m speed of p.t.o. shaft: . U/min numbers of tine holder: . 0 Tooth pack roller, cardan shaft, roller, treble The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IWM Sanitiser tunnel Model: SAN100E Stainless, suitable for sanitising produce in buckets, bags, tins and trays, max size 450mm W x 450mm H, recirculation tank, mobile, 3Ph

MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...

Beer Brewery Two Vessel VELO 15hl/brew, two brews/day, up to 4000hl/annum Complete two vessel beer brew line made by Italian VELO (currently TMCI Padovan) suitable for various beer types from ALEs to LAGER’s, non-alcoholic beers to strong, over 10% Imperial Stouts. Normal brew size has been 1500 liters and during high season, they have brewed 2 brews during 10-hour day. Maximum batch of malt is 600 kg. Without adding sugar beer wort has been from 18.5 to 21 Plato and with sugar added, up to 35 Plato. One complete brew batch with CIP will take about 5-6 hours. In operation, this brewery has overlapped brew batches so that once the first batch of the day has been lautered and spend grain has been unloaded, they started next brew. Maximum weekly brewing capacity with 10 hour working days has been 6 brews (3x3000 liters CCT) due to fermenting tank capacity which leads to theoretical 40 ...

Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available

working width: 6 m speed of p.t.o. shaft: 1000 U/min numbers of tine holder: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 6 m speed of p.t.o. shaft: . U/min numbers of tine holder: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IWM Sanitiser tunnel Model: SAN100E Serial: 1281-S1E 2014, Stainless, suitable for sanitising produce in buckets, bags, tins and trays, max size 450mm W x 450mm H, recirculation tank, mobile, 3Ph

Fork carrier or tine adjustment device incl. 4 tines for Kalmar DCF 60 Kaup 4T419N4, used, tight, ready for use

There are three Push-Pull Attachments Meyer 1-2503 N, one Implement/ Box Clamp Cascade 20D-CC-X07J and one Multiple-Pallet Tine Adjuster Durwen DPK 30B available, all attachments are only conditionally serviceable as they have not been in use for some time, all items would need to be checked.

Gluing cutters Diameter 120mm Width 50mm Bore 50mm Z4 2 trapezoidal tines G&-4965

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

Cleaning of trays and baking tins in the bakery. -Year of construction 2021 -Voltage: 230 volts -Power 2.5 kW -Temperature 70 C° External dimensions approx. 121x35x90cm Internal dimensions approx.: 102x30x74cm

Tilting container, tipping container for forklifts Chip bucket - Hopper - Folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry bracket: 230 x 110 mm Tine distance inside/outside: 160/600 mm- manual tilting device via hand lever - 4 pieces plastic fixed castors 175 and, 2 pieces steerable- foldable trailer drawbar - drive-in bracket/forklift holder Net weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm good condition Suitable for collecting, storing and transferring recyclable materials; used

Tine adjuster with side adjustment type: 3.5 T 466 B from Kaup

Standard Configuration Machine ? Closed machine frame ? Integrated cabinet ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Chiller ? Automatic pallet changer lengthwise installation ? Enclosed beam delivery via laser light cable ? Integrated electrical cabinets with inside light ? Wide longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning TRUMPF laser ? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output ? Stimulation via pump diodes ? Laser power control Cutting head ? Universal cutting unit ? One cutting head strategy ? Protection glass to avoid lens contamination ? Online protection glass monitoring ? ControlLine Control ? Easy shop floor programming ...

Electric Forklift Manufacturer Still Type R60-20 Year of construction 2005 Duplex mast with full free lift Side shifters Tine adjustment Low operating hours Very good condition Very good battery from year of construction 2019! Hawker Special price

Year of construction: 2008 Hours 16900 Load capacity 2000 kg Centre of gravity 600 mm Triplex mast Lifting height 6355 mm Construction height 2923 mm Fork length 1200 mm Side shift Tine adjustment Tilt fork Extend fork hydraulich to 2m Heated seats Rotating Steering position indicator Battery 48V 750 Ah Charger, amperage 180A Chassis width 1250 mm incl. charger and battery

Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Mac ...

hydraulic track marker, tramline control, drag coulter with trailing harrow, filling stairs, 12 cm row spacing / 34 coulters, with Unia Ares 400 short combination: 2 row height-adjustable tines, 1 cross kill roller, fifth wheel coupling system Weiste, Working width: 400, Year of construction: 1

2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount

We have IN STOCK P3V6N1 1257581, P3V3i 1254664 & P7V5i 21103764 New & sealed tins/boxes Email for price and availability.

Tubular cable lug, crimp terminal, 46 pieces KLAUKE 8R12 KL95/12 Nominal cross-section : 95 mm² Screw size: M12 Material: tinned copper New ! Dimensions ( Terminal ): 63 x 26 x 20 mm Dimensions ( packaging ): 170 x 145 x 80 mm

Tine press Fabr. Hungerbühler / Humag Pneiummatic up to 20 bar

Manufacturer: Hymmen, Type: JPT LW 2200/280, Operating system: Windowx XP, Software: K-Flow, Hardware: yes, AV Arbeitsplatz: yes, Bedruckbares Material: Papier,MDF,Kork, Working hight mm: 900, Nennbreite mm: 2300, Eff. Nutzbreite: 2100, Through running hight mm: max 50, Druckgeschwinidigkeit m/min : 25 (bei 360dpi), Anlagengeschwindigkeit m/min: 15-50, Single pass: yes, Year: 2010, Bedruckbares Material: Papier,MDF,Kork, Papiere: Rollenmaterial, Papierbreite min-max: 600-2100, Papiergewichte g/m²: 60-120, Papierrollendurchmesser max.: 800, Rapportlänge mm: 2600, MDF/HDF: yes, Fussbodendielen: yes, Werckstückdicke min-max mm: 5-17, Plattenbreite min-max mm: 500-2100, Plattenlänge min- max mm: 500-3000, Plattenwelligkeit mm: 3, Fussbodendielen: yes, Dicken mm min-max: 5-17, Längen mm min-max: 500-4500, Breiten mm min-max: 90-400, Welligkeit mm : 3, Tinten UV härtend: yes, Rollena ...

Butt connectors, crimp connectors, butt cable connectors, 44 pieces KLAUKE KL70 Nominal cross-section : 70 mm² Inner diameter: Ø 12 mm Insertion length: 2x 25 mm Material: tinned copper Other quantities on request ! New ! Dimensions ( butt connector ): 55 x 17 x 17 mm Dimensions ( packaging ): 160 x 135 x 75 mm

Pamasol 33200 Pneumatic Feeder With 1-lane output to the conveyor belt Accumulation conveyors ensure an even supply of product to a processing machine. - Hinge chain 150 mm wide - 8-lane, with 1-lane output - Drive with infinitely variable geared motor - Without central belt drive - Suitable for continuous operation in hazardous areas - Electric drive unit - Feeding table suitable for Centomat Specifications Capacity: Up to 3000 cans per day The output depends on the size of the can, the filling volume, the type of valve and the number of workers Cans: Ø 100-200 mm x H 50-200 mm, aluminium, tinplate and glass Electrical connection: 3 x 400 V + N + PE, 50 Hz Dimensions: H x W x L 88 x 140 x 290 cm Original price 57.000 ,-€ More items - new and used - can be found in our shop! International shipping costs on request!

Height pallet trucks, pallet trucks, forklifts, pedestrian pallet trucks, pallet trucks -Connection: 380 volts -Load capacity: 1200 kg -Lifting height: 990 mm -Own height: 1450 mm -Width: 670 mm -Length: 1400 mm -Tine length: 920 mm -Own weight: 300 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1190mm -Cross section: 150 x 65 mm - Recording: see technical drawing in the photos -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Crane fork, loading fork, load fork, pallet fork, pallet crane fork -Manufacturer: REMA, pallet hook with manual balancing -Load capacity: 3000 kg -Tine length: 980 mm -manual weight balancing -Fork: adjustable, 430 to 880 mm -Useable height: 1320 to 2020 mm -Dimension: 1185/930/H1640 mm -Total weight: 270 kg

Height pallet trucks, pallet trucks, forklifts, pedestrian pallet trucks, pallet trucks, stackers, pedestrian stackers - Manufacturer: BAKA, pallet stacker type EGGT 69-1604 -Payload: max. 1600 kg -Lifting height: 2250 mm -Own height: 1670 mm -Width: 870 mm -Length: without tines 1630 mm -Tines: length 800 mm / 80 x 40 mm -without battery: battery defective, can be replaced at an additional cost -Dimensions: 2500/870/H1670 mm Dead weight: 2050 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1110 mm -Cross-section: 150 x 50 mm -Recording: see technical drawing in the photos -Transport dimensions: 1290/700/H150 mm -Weight: 202 kg