thread rolling used for sale

Refer to code 1031 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1032 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1060 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1085 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

The facility includes a comprehensive range of production and support equipment, including: 4 Cold Rolling Mills (4Hi & 2Hi) – including tandem rolling lines with speeds up to 500 m/min, processing strip widths from 4–100 mm and thicknesses from 0.4–4.5 mm. 9 Annealing Furnace Units – stretch and batch furnaces operating with nitrogen and hydrogen atmospheres, with temperatures up to 1,000°C. Inspection, NDT & Finishing Lines – including eddy current inspection, surface grinding, shaving, and coil-to-bundle conversion. 2 CRM Work Roll Grinders (WMW, Germany) – together with blanking lines capable of producing up to 240 hacksaw blanks per minute. Laboratory & Auxiliary Equipment – including tensile testing equipment, optical microscopes, compressors, punch presses, and other supporting machinery. In combination lot, but also available for individual pu ...

GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Max. Clamping Diameter: approx. 315 mm Power: 25 kW

General Description Thermal break rolling machine manufactured by Schüco International KG , model ISOMAT 5 . Designed for rolling polyamide insulating strips into aluminium profiles to produce thermally broken window, door and curtain wall sections. Suitable for aluminium profile fabrication and façade production. Technical Details Manufacturer: Schüco International KG Model: ISOMAT 5 Machine type: Thermal break rolling machine Year: 1998 Article No.: 299563 Serial number: 792-125 Power supply: 400 V, 50 Hz Motor power: 1.1 kW Rated current: 3.0 A Multiple precision rolling stations Adjustable guide rollers Profile support/feed table Emergency stop Weight: 660 kg Condition Good used industrial condition. The machine appears complete with roller assemblies, guide rollers, feed table and safety guards installed. Original Schüco paint is present with normal cosmet ...

Viewing by appointment Auction-ID: A1-51065-31

A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

Auction-ID: A1-51285-299

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-32

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-76

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-77

Rollable version, with height adjustment Auction-ID: A7-51473-5

Rollable version, with height adjustment Auction-ID: A7-51473-15

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-30

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-33

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-56

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-4

Rollable version, with backrest and height adjustment Auction-ID: A7-51473-75

weight:22 t

Key data: 200 mm, 500 mm

Rolling mill in very good condition. Used. Without CE.

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Sendzimir, completely revamped by IS2 Type: ZR23-25 Built: No information! Completely rebuilt: 2000 Stopped: 09/2022, still under power Strip width: 280 – 625 mm Thickness: Entry: 3.5 mm Exit: 0.05 mm Speed: 1st gear: 0 – 165 m/min. 2nd gear: 0 – 280 m/min. PLC GE FANUC – IC697CPX782

Refer to code 1071-1072-1073-1074-1075-1076 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1063-1064-1067 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1152 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Refer to code 1089-1090 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Cefla, Type: Beizlinie, Year: 2005, Work piece width min-max mm: 100 - 1300, Min.-max. workpiece length in mm: 3 - 80, Min.-max. workpiece height in mm: 300 - 2010, Working widht max mm: 5, Working width min min mm: yes, Apstapelanlage Typ: no, Cycle rate: yes, Type of stacking system: Bürste D2/1300-15, Conveyour system: yes, Fast exchange system spray gun carrier: Rotostain RT 10, Laquer circles: yes, Laquer system - airless: VS/26-2C, Laquer system - airmix: brush sander, Water cleaning: FEV EU2/7-TT 12850, Working widht mm: Band, Year :2005

Manufacturer: Cefla Sorbini DMC, Year: ca. 1990, Work piece width min-max mm: 1300, Abstapelanlage Typ: no, Roller coater line: yes, Sanding machines (number): 2, Design sanding machine no 1: Quer Längs Längs, Stain rollers qty.: 2, Laquer roller coaters (number): 2, 2 UV lamps qty.: 1, UV dryers - 3 lamps (number): 2, Year :ca. 1990

Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Superfici mit Hochtrockner, Type: Twinspray, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, Working widht max mm: 1300, Spraying line: yes, work piece cleaning: Rakel, Conveyour system: Band, Fast exchange system spray gun carrier: yes, Laquer circles: 5, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, Dry exhauster: yes, Belt conveyors (number): 2, High dryers (number): 24/5500 mm, Length of pallets mm: 5500, Feedin speed m/min: 3-5, Year :2001

Roll gap from 0.6 mm. New roller shells. Power at gap of 0.8 mm is 40t

Refer to code 1154 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Key data: 660 mm, 2100 mm

4 nos. Buzuluk 84" Mills available! Drilled Rolls, Rollerbearings, electrical Nip adj., Bullgear Drive 2 x left Hand Drive 2 x Right Hand Drive Description attached!

Refer to code 1155 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Breitenbach fine roller mill type PWF 812 8001200, gap from 0.6 mm, roller shell thickness 95 and 105 mm, drive 90 kW, drive pulley Ø650, motor pulley Ø224, productivity at a gap of 0.6-0.8 mm: 40-50 t/h

Refer to code 1170 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

rolling capacity max.: t workpiece diameter: 470 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rolling mill 800x800 mm, built in 1996 Roller shell thickness 60 mm

Refer to code 1171 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.