testing used for sale

MAMAMTA WIN 305 foil bag sealing machine Technical condition (on a scale of 1-10): 10 Year of manufacture 2018. 0 production mileage. Status - after startup. Possibility of testing.

• For turning and grouping folding boxes with 5th flap (suspension or display flap) and transfer to downstream machine, e.g. Pester PEWO-fold stretch-banding machine. • Infeed with 5th flap at the bottom in advance • Max. grouping of 6 products, each 3 products rotated by 180° • Infeed capacity max. 140 cartons/min. • Folding box dimensions min./max. (a x w x h) 30-64 x 20-39 x 82-156 mm, other dimensions after testing • Servo controller Elau PacDrive C200 with 1x PacDrive MC-4 • Operator terminal Pester Micro-Panel 10,4 • Programmable control system • Bypass function • 2.586 operating hours • Drive 400V/50Hz

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

Engel Victory 330/90 injection molding machine for sale. Year of production: 2009. Clamping force: 90 tons. Screw diameter 40 mm. Hours worked: approximately 60 thousand. The machine is in very good technical and visual condition. Working machine, possibility of testing on the buyers injection mold.

Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine How to build one isobaric triblock The isobaric filler c ...

Filling machine for PFS and Cartridges in nest; for testing and small batches. Dimensions: 1,500ｘ 1,135ｘ 2,000 mm Max. Output: 4.800/hr Filling volume: 0.5 - 50 ml Supported package: 20/30/42/64/100/160 nest Filling system: Rotary piston pump, peristaltic pump, time pressure, or in combination. DFVN 1000 series is the smallest filling and stoppering machine by Groninger. Designed as a filling and closing machine for presterilized disposable syringes in nest for laboratories, test series and small batches. This semi-automated stoppering and filling machine offers processes identical to those of a high-output system. The machine supports manual nest handling under laminar flow. Clear separation between the manual handling section and the fully automatic production section.

VINDEX OW-1 stretch wrapping machine is used in many industries to wrap high and heavy loads with stretch film. After selecting the appropriate button on the control cabinet, the process is fully automatic, reducing the time required for wrapping and increasing productivity at the same time. Distinguished by its robust and stable design, the VINDEX automatic pallet wrapping machine has run for a small amount of time during testing and is ready to be implemented in the storage process. Technical specifications of the VINDEX OW-1 pallet wrapping machine - maximum load height: 2100 mm - maximum pallet weight: 2500 kg - maximum pallet dimensions (L x W): 1200 x 800 mm - power supply: 1-phase

MIKRON UCP 600 VARIO machining center TECHNICAL CHARACTERISTICS: Year: 2006 CN Type: HEIDENHAIN iTNC 530 Number of continuous axes: 5 X-axis travel: 600 [mm] Y-axis travel: 450 [mm] Z-axis travel: 450 [mm] Table length: 325 [mm] Table width: 325 [mm] Max. weight Permissible on the table: 200 [Kg] Table area Ø: 450 [mm] Pin Attachment: HSK-A 63 Minimum speed. Spindle: 100 [RPM] Max. speed Spindle: 20000 [RPM] Spindle power: 13.5 [kW] Number of tool magazine stations: 120 Max. length Tool Size: 250 [mm] Max. weight per tool: 6 [Kg] Max. diameter Tool Size: 125 [mm] Supply voltage: 400 [V] Machine Weight: 7700 [Kg] Tool changer weight: 800 [Kg] Palletizer weight: 1200 [Kg] Visible machine under power for testing at our premises, by appointment. Price excl. VAT on request, truck loading included. Possibility of shipping throughout France as well as intern ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric design. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. Availability from week 8 The RRP. for this combi steamer is € 27,110 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment se ...

Used Isobaric Complete Bottling Line 6000 bph Used isobaric filler Machine Bertolaso 11000 bph Suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine Used Capping Machine Bertolaso RS 6 9000 BPH Straight ...

General SKU212T529 LocationBarneveld MakeFranken TypePTS 250 No.00625 Year of construction1990 Main Features MaterialStainless steel Capacity7200 Ltr./Hr. Specified Features - Separator Separatorcheck Capacity130 Ltr. InletDN50 Liquid outletDN50 MaterialStainless steel 1.4571 (316Ti) Information Total height1 m Weight160 kg Floorspace2,3x0,3 m Extra SpecificationsOperation pressure: -1/2 bar testing pressure: 2,6 bar operating temperature: 200 °C SeparatorsFrankenCentrifuges > SeparatorsBrand > Franken What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKULT011 LocationBarneveld MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume350 Ltr. Motor0.09 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity(3x) 7Ltr., 20 Ltr., (2x) 80 Ltr., 120 Ltr., 190 Ltr., 350 Ltr. With jacketcheck Max. temperature-10/95 °C With propellor stirrerMagnetic ZETA, Type: BMRT Motor0.09 kW, 230-400 Volt, (Ex) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information Mounted on legscheck With switchcheck CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications Download full specifications of this line here. Download (https://www.foeth/pub/media/wysiwyg/PDF/LT.pdf) 4 NEW/NEVER USED IMMEDIATELY AVAIL ...

CNC lathe sliding headstock STAR SR20R /// SR 20 R TECHNICAL CHARACTERISTICS: Year: 2000 NC Type: FANUC 18i-T Number of axes: 5 Max. length Machinable: 205 [mm] Max. diameter Turning spindle bar: 20 [mm] Max. speed Spindle: 8000 [RPM] C-axis indexing accuracy: 0.001 [°] Spindle power: 3.7 [kW] Max. diameter Counter-spindle bar: 20 [mm] Max. speed Counter Spindle: 4500 [RPM] C-axis counter-spindle indexing accuracy: 0.001 [°] Counter Spindle Power: 1.1 [kW] Number of end device positions: 4 Number of motorized end positions: 4 Number of comb positions 1: 6 Number of Comb 1 Motorized Stations: 4 Comb Rotating Tool Speed 1: 5000 [RPM] Number of counter-operation positions: 4 Number of motorized counter-operation positions: 4 Watering pan capacity: 155 [l] Supply voltage: 400 [V] RS232 port: Yes Hours Operating: 40920 [h] Weight: 2200 [Kg] EQUIPMENT INCLUDE ...

General SKULT010 LocationBarneveld MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume350 Ltr. Motor0.09 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity(3x) 7Ltr., 20 Ltr., (2x) 80 Ltr., 120 Ltr., 190 Ltr., 350 Ltr. With jacketcheck Max. temperature-10/95 °C With propellor stirrerMagnetic ZETA, Type: BMRT Motor0.09 kW (Ex) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information Mounted on legscheck With switchcheck CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications Download full specifications of this line here. Download (https://www.foeth/pub/media/wysiwyg/PDF/LT.pdf) 4 NEW/NEVER USED IMMEDIATELY AVAILABLE FROM A CAN ...

hain mortising machine in extremely well-preserved condition because no workers worked on it. First owner, little used. With the machine, two guides and 2 new chains with a width of 10 and 14 mm. Automatic oil lubrication of the chain. Pneumatic lifting of the drilling head. Drilling head swivels 0 - 46° in both directions. Work table swiveled 0 - 46°. Built-in mechanism for additional fine adjustment of the height of the work table. Measuring scales for milling width and depth. Two quick-adjusting mechanical milling depth stops. The machine is mounted on high-quality industrial wheels and can be easily moved as needed. The machine is in TOP condition and can be tested in operation. Reason for sale - used too little. Immediately available for viewing and testing in Velika Gorica, Croatia.

- System connected and ready for testing - 4-point aggregate - Can work with F,E,B,C,BE,EB flute - Can make 4 glued corners/ Servo jaws are installed. - Number of gluing points : 1,3,4 points - 3 point gluing is possible Plant is dismantled Price includes dismantling and loading. Generally good condition, not overhauled. Was in production until dismantling

General SKULT012 LocationBarneveld MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume350 Ltr. Motor0.09 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity(3x) 7Ltr., 20 Ltr., (2x) 80 Ltr., 120 Ltr., 190 Ltr., 350 Ltr. With jacketcheck Max. temperature-10/95 °C With propellor stirrerMagnetic ZETA, Type: BMRT Motor0.09 kW, 230-400 Volt, (Ex) Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information Mounted on legscheck With switchcheck CEcheck With switchgearcheck ATEX compatiblecheck Extra Specifications Download full specifications of this line here. Download (https://www.foeth/pub/media/wysiwyg/PDF/LT.pdf) 4 NEW/NEVER USED IMMEDIATELY AVAIL ...

Manufacturer Angelantoni ACS Model DY 110 Operating condition Used (as good as new) Year of construction2021 Value added tax Deductible DescriptionClimate test chamber ACS DY110 - Year of construction 2021 - Acquisition January 2022 - approx. 500 operating hours - Sale due to completion of product development / testing Technical data: - Test chamber dimensions: 548 x 447 x 447 mm - Test chamber volume: 110 litres - Working range temperature tests: -40 to +180°C - Working range of climate tests: +10 to +95 °C and 10 to 95 % relative humidity - Rated power 3 kW, connection to 1/N/PE AC 230V 50Hz via CEE Qualifications: - 2006/42/CE Machinery Directive - 2014/35/UE Low Voltage Directive - 2014/30/UE Electromagnetic Compatibility Directive - IEC 61439-1/2 Low-voltage switchgear and controlgear assemblies - IEC-60204-1 Safety of machinery - Electrical equipment  ...

WPC production line 1. Twin-screw extruder GWC 80-156 2. Twin-screw extruder GWC 65-132 3. CAL 14000/6 calibration table 4. ROL 240 two-track haul-off 5. Saw 240 6. Cheyenne SP2 brushing machine 7. SR-RP700 wide-belt sander 8. Storage device 9. Mixer 500 / 1000L + weighing system 10. Complete line for pulverization + drying room Pulverizer Installed power: 26 [kW! Turnover 3300 [Rpm]! Capacity: 300 [kg / h]! Grain size: 65-80 [mesh]! Input material size

This is a slicer from the manufacturer ADE type Juwel 2 with a 230V connection. The slicer has a 300mm slicer with Teflon coating and is suitable for cutting sausages and also for cutting cheese (no sticking of cheese to the knife). The models of the Juwel series are high-performance professional cutters that are suitable for the intended continuous operation. The cutting thickness is infinitely variable from 0 to 15 mm and particularly fine between 0 and 3 mm. The sophisticated drive technology with its air-cooled, maintenance-free motor and extremely quiet drive is also impressive. The machine is new and unused, but no longer in its original packaging (exhibition piece). OUR SERVICE FOR YOU: - 12 months warranty on all electrical parts - High-quality branded appliances at fair prices - Professional Overhaul / Inspection & Professional Cleaning - Tested & fully functional -  ...

Packaging machine designed for packaging fresh food products in a modified atmosphere (MAP) to extend shelf life. The system is used to pack products such as fresh or processed meat, poultry, pizza, fish, pasta or cheese. Durability ensures hermetic closing of the packaging together with a mixture of protective gases. The packing machine was used for testing purposes. Very good condition.

Lilla Coffee Roaster, made in Brazil. Sup-ecologically-friendly, it recycles the hot air from the drum back into the furnace” which acts as it’s own after-burner and wastes no heat. This cuts down on the amount of gas used. From 2005 until 2019, it has roasted most of our coffee. We have been working on a refurbishment program to bring it back to perfect working order. This is now complete and the roaster is ready for another 15 years…perhaps – a video which we made during final testing phase is available on request.

This is the latest generation of the VarioCooking Center, the iVario Pro 2-S from the premium manufacturer Rational. (successor to the VCC 112L). The iVario Pro 2-S is offered including the pictured accessories but without a base. However, a base frame can be purchased for an extra charge. The device has been tested in our in-house specialist workshop and is fully functional. The RRP for the basic unit is €17,700 net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our device service for you •Manufacturer's warranty until 08/2025 • H ...

Machine in good technical condition, possibility of testing after agreement. Control system Fanuc ... 0i - MC ; Table clamping surface ... 1200 x 500 mm; X-axis travel ... 1020 mm; Y-axis travel ... 510 mm; Z-axis travel ... 560 mm; Spindle speed ... 0-8000 /min.; Number of controlled axes ... 3; Spindle clamping cone ... BT40.; Dimensions L x W x H ... 2960 x 2150 x 2600 mm; Machine weight ... 5000 kg; Max. table load ... 450 kg; Tool magazine YES; Number of positions in the tool tray ... 16. See photo for accessories.

Machine in good technical condition, possibility of testing after agreement. In 2015, GO spindles took place. In October 2023, the tool magazine motor was replaced. In 2011, a license for the DXF software option was purchased - import for iTNC. Motorcycle watches. power on time : 57676. Heidenhain iTNC53O control system. Technical data: Longitudinal clearance (X): 2 x 750 mm Cross travel (Y): 500 mm Vertical travel (Z): 600 mm Table-spindle face distance: 180 - 780 mm Machine table: Table clamping surface: 1000 x 500 mm T grooves 3 pieces (middle groove H7): 14 H9 mm Table load. 800 kg/m2 (with uniform surface load of the table) Feeds: Max. sliding force: 9000N Rapid traverse in X/Y/Z: 25/25/20 m/min Feed in all axes: 1 – 9999 mm/min Main drive-spindle: Main drive AC motor with hollow shaft 40% ED: 40 kW Speed ​​range - stepless: 30-6000 rpm. Spindle torque 4 ...

The machine is in good technical condition, after agreement the possibility of testing. Machine parameters: Feed in the X axis 1600 mm Feed in the Y axis 800 mm Feed in the Z axis 900 mm Angle of rotation +/- 105 ° Maximum speed 12000 rpm Number of tools in the magazine: 24 Dimensions of the work table: 2000 x 850 mm. It is designed for customers where it requires a vertical spindle as well as high speed and is the perfect solution with all the benefits it provides: - High speed range and high torque - High position dynamics and high acceleration in the axes - Limited working space: maximum comfort and safety - Vertical protection up to the roof in the X axis: optimizes the removal of chips and coolant - The upper cover of the working area with the roof allows access by a bridge crane - Tool change and tool change arm in the working area. The machine accessories include a wall dividing  ...

Type: H 100A Parameters: 100 mm, 1250 mm Manufacturer: Tos Year of production / SO / GO: 1970 / - / 2004 Description: Machine in good technical condition. Possibility of testing after agreement. Working Spindle Diameter 100 Mm Iso 50 Spindle Taper Table Clamping Area 1250 X 1250 Mm Max. Workpiece weight 3000 Kg Longitudinal Table Movement - X Axis 1250 Mm Transverse Table Movement - Z Axis 1250 Mm Vertical Table Movement - Y Axis 1120 Mm

The machine is in good technical condition, after agreement the possibility of testing. OS accessories: GE Fanuc series 18i-MB5-including manual, chip ejector, Nikken series CNC260B rotary table and support bearing, 70 bar high pressure pump, spindle center cooling, air cooling, additional plate, MP12 workpiece probe. X and Y axis laser compensation was made on the machine in 2021, a ball bar is available. The machine is normally worn. Renishaw workpiece probe cycles purchased for the machine. The machine will be released from production after the delivery of a new machine.

Machine in good technical condition, after agreement possibility of testing. Clamping surface of the table 700x500 mm X axis travel 600 mm Y-axis travel 450 mm Z axis travel 300 mm Spindle speed 0 - 42000 /min. Number of controlled axes 3 Centre cooling no Spindle clamping cone HSK E 40 . Machine weight 6000 kg Max. workpiece weight 800 kg Dimensions d x w x h 3200x2250x2650 mm

The machine is in good technical condition, testing possible upon agreement. Lathe with gantry loader. 2 spindles - 6” chucks (165 mm), 2 V12 turrets, 2 workpiece loaders, pick-up stations, 2 Pneumotec workpiece reservoirs, 18 chip ejector positions, OSP-U 100L control system.

Type: LFS 12 - 2SP Parameters: Manufacturer: Okuma Year of production / SO / GO: 2001 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Lathe with gantry loader. Technical parameters: 2 spindles - 8 ”chucks (210 mm), 2 V12 turrets, 2 workpiece loaders, catch stations, 2 Pneumotec workpiece magazines 18 positions, chip ejector, control system OSP-U 100 L. technical datas max turning length [mm] 70 max swing over saddle [mm] 200 max speed [rpm] 6000 rapid feed [m / min] 24/24 (X / Z) max main power [kW] 11 number of tools [piece] 12 + 12 tool clamping system direct recording. length [mm] 2,500 large [mm] 2.084 High [mm] 3.080 weight [kg] 5,000.

Machine in good technical condition, possibility of testing after agreement. Control system: FANUC i-series Total hours: 5042 h Operating hours: 2531 h Max. turning length: 300 mm Max. turning diameter: 280 mm Maximum feed length in the X axis: 165 mm Maximum feed length in the Z axis: 330 mm Maximum power of the main spindle: 11 kW Maximum speed: 6000 1/min Equipment: Bar feeder AutoBar 65 (1.5 m) C-axis Chip conveyor Brackets Chuck CNC tailstock Tools Tool probe

The machine is in good technical condition, testing possible upon agreement. Clamping plate diameter: 1000 mm Max. diameter of peripheral turning: 1150 mm Max. workpiece height: 900 mm Performance of the main engine: 40 kW Machine weight: 12,000 kg

Semi-automatic Year of manufacture/SO/GO: 1988/-/2003 Machine in good technical condition, after agreement possibility of testing. - Possibility of agreement - in case of agreement, in case of consultation, available for consultation - control system NS660, data input and output from PC via communication adapter TRANS - including chip conveyor - including many types of tool holders

Type: FGS 63B CNC Parameters: 630 mm, 2000 mm Manufacturer: Tos Year of production / SO / GO: 1999 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. TNC426 control system. Technical parameters: Working range - travels: X-axis: 1250 mm Y axis: 850 mm Z axis: 500 mm Max. table load: 1000 kg Table clamping area: 630 x 1600 mm Working feed: X-axis: 1 - 40,000 mm / min Y axis: 1 - 4000 mm / min Z axis: 1 - 2000 mm / min

The machine is in good technical condition, testing possible upon agreement. Revolving diameter mm 160 Center distance mm 250 Grinding wheel: diameter x hole x width mm 250 x 76 x 20 The largest width of the grinding wheel mm 40 Cone of the working spindle Morse 3 Cone in the tip socket of the tailstock Morse 2 Diameter of the three-jaw chuck mm 80 Rotation of the grinding spindle number of degrees 60 Rotation of the working spindle number of degrees 90 Rotation of the table on both sides number of degrees 10 Speed ​​of the grinding spindle min - 1 2420.3290 The largest longitudinal movement of the table mm 290 The smallest longitudinal movement of the table mm 1 Transverse movement of the grinding spindle mm 100 Quick adjustment of the grinding spindle mm 16 Total machine power kW 2.5 Maximum weight of the workpiece kg 10 Floor plan of the machine: length x width mm 1900 x 1100 Weig ...

Type: 3G 71M Parameters: 230 mm, 600 mm Manufacturer: Stankoimport Year of production / SO / GO: - / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Grinding width: 230 mm Grinding length: 600 mm Grinding height: 400 mm Weight: 3000kg

The machine is in good technical condition, after prior agreement the possibility of testing. Longitudinal table movement - axis x 1000 mm Transverse table movement - z axis 320 mm Vertical table movement - y axis 350 mm Grinding spindle speed 2280, 2600 rpm Max. workpiece weight 280 kg machine weight 3200 kg

The machine is in good technical condition, after agreement the possibility of testing. • Solid cast iron construction • Continuous / step automatic reversing feed • Variable table speed up to 25 m / min • Coarse and fine feed • Table parking after cycle completion. • Automatic direct dressing with grinding wheel compensation • 1/10 micron feed down and to the side with the possibility of a combination of both • Hydraulic oil cooler • All settings are controlled from the front of the machine. Magnetic table dimensions: 600x300 mm Transverse feed: 340 mm Maximum grinding height for new wheel: 322 mm Table load: 420 kg Grinding wheel dimensions: 355x38x127 mm Length x width x machine height: 2730 x 1910 x 1780 mm Weight without accessories: 2500 kg .

The machine is in good technical condition, after agreement the possibility of testing. Grinding range, max. 600 mm. Table Ø / magnetic chuck Ø 600 mm. Workpiece - Swing Ø approx. 800 mm. Table speed, continuously adjustable 20 - 80 rpm. Max. grinding height above the table approx. 300 mm. Vertical movement of the grinding head 220 mm. Transverse movement of the grinding support 320 mm. Max. workpiece weight on the table 400 kg. Vertical feed, automatic 0.01 - 0.2 mm / stroke. Grinding spindle speed, continuously adjustable 1,000 - 2,400 rpm. Grinding wheel Ø, max. 400 x 120 x 76 mm Grinding spindle drive approx. 28 kW. Total electrical load 35 kW - 380 V - 50 Hz. Weight, approx. 4,500 kg.

The machine is in good technical condition, after prior agreement the possibility of testing. Max. grinding length 1,000 mm Max. height of ground object with new discs (from the table) 350 mm Longitudinal table movement 1,060 mm Transverse table movement 350 mm Vertical movement of the grinding headstock 400 mm Distance of the spindle axis from the table clamping surface min. 75 mm, max. 475 mm Vertical cutting feed - 1 scale division 0.001 mm Grinding wheel (ø x width x hole ø) 250 x 25 x 76 mm Grinding wheel speed ø 250 mm 2,522 min-1 Partially worn grinding wheel speed 3 319 min-1 Grinding headstock motor power 3 kW Machine dimensions Machine floor area approx. 4,100 x 2,000 mm Machine height 2,125 mm Machine weight 3,400 kg Electrical equipment Total machine power 9.3 kVA Accessories Magnetic clamping plate 300 x 1,000 mm , height 100 mm

Description: Band saw fully functional, possibility of testing. The saw has a new gearbox to drive the saw band, sealed hydraulics. Accessories: roller track folded 3x2m, i.e. a track with a length of max. 6 m Cutting range 430 x 360 mm. Saw band 4400 x 34 x 1.1 mm. 3 kW motor. Belt speed 12-155 m/min. Weight 1650 kg. Dimensions 2170 x 2290 x 1820 mm.

Band saw fully functional, possibility of testing. Cutting range 430 x 360 mm. Saw band 4400 x 34 x 1.1 mm. 3 kW motor. Belt speed 12-155 m/min. Weight 1650 kg. Dimensions 2,170 × 2,290 × 1,820 mm. Saw control by hand or by microcontroller. Accessories: 18 saw bands of different tooth sizes.

Type: JHG 60 material edging machine Year of production / SO / GO: 2015 / - / - Description: Machine for edging material edges. Presses ornaments into the web. Machine in good technical condition, after agreement the possibility of testing. Machine dimensions: 1636 x 990 x 1330 mm. Weight 1260 kg. Available in English.

Machine in good technical condition, possibility of testing by agreement. Hydraulic cutting and punching machine. It can cut flanges up to 500x20 mm, logs up to 40 mm, roxor, squares. Punch the boards with different types of cutters. Ideal for the production of anchor and connection plates. The machine is like new, max. 100 hours worked.With accessories.

Year of Manufacture: 2015 Location: Czech Republic Description: Machine in good technical condition, possibility of testing after agreement. Technical parameters: cutting range - steel 12mm, Al 6mm gas - O2, N2, air laser power - 2kW max. sheet size - 1500 x 3000mm ejection of material and blanks - manually, 1 table online monitoring of cutting Wrykrys software for creating firing plans . Accessories: compressor and filter. unit.

Type: A89 TNCB Parameters: Manufacturer: CSM Taiwan Year of production / SO / GO: 2014 / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Main parameters: Max bending angle 180 °. Largest profile 60x60x6. Max bending radius at the center of the TUBE: CLR 350 mm. Max bending radius at the center of the PROFILE: CLR 300 mm. Working mandrel range 3600 mm. Weight 2500kg. Dimensions: 4700x1200x1200 mm. Power consumption: 15 kW.

The machine is in good technical condition, after agreement the possibility of testing. ALFATEC CNC compact plasma 2m x 1 m, PEGAS 100 PLASMA CNC, Torch S 125 10m PEGAS 100 Plasma machine, WRYKRYS - technological program. Dimensions: length 270 cm, width 200 cm, table height 80 cm, height including control panel 170 cm, weight 940 kg.

press ram:: ram head width: 2.100 mm depth: 840 mm stroke: 350 mm Control: EXNER Guide way length: 750 mm nominal pressure: 2x 400 kN return capacity: 2x 150 kN ram stroke speed - under load: 100%: ca. 0 - 10 mm/s ram stroke speed: ca. 0 - 20 mm/s T-slot - width: 18 mm T-slot - distance: 150 mm Installation Space:: dayligth: 550 mm table surface area: 1.600 x 840 mm T-slot - width: 18 mm T-slot - distance: 90 mm dist. between pillars (left to right): 1.700 mm dist. between pillars (front to rear): 600 mm table height over floor: 1.300 mm total power requirement: 11 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 2,5 x 2,0 x 3,7 m Hydraulic tool testing press EXNER - PG 80 - very good condition - approx. 300 operating hours - Electronic roller feed device EV 22 AK incl. Bandwidth: max. 220 mm Band cross section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: ...

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...