tba 21 used for sale

Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...

ynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery  ...

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA2 2100 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 20,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Machine type TIG inverter welding system gas-cooled DC system Merkle brand Type LiteTIG 210 DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 145 amps 100% ED at 135 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 8 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex stock with 2 ...

various knife head fraesers / plan fraesers 200, 215 250 mm

1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 210 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 210 amps Duty cycle 20 % ED at 210 Ampere 60% ED at 140 amps 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual Listen-Werk-Price ex st ...

2130 2x3 M 3D CNC milling plotter built in 2014 in China, is used for machining workpieces in the X,Y and Z axes. Machining is performed on the machine’s vacuum table with dimensions (L x W) of 3000 x 2100 mm, by using a rotary head. The applied electro-spindle with a power of 4.5 kW, is distinguished by its extreme reliability and speed reaching up to 18000 rpm, allowing the desired result to be obtained in a very short time. The CNC milling machine is controlled by a hand-held terminal connected to the WEIHONG NK105 G2 CNC controller. This solution makes the machine’s operation much easier to handle and allows every function to be used. The machining centre is also equipped with among others: an EMI filter to attenuate high-frequency electromagnetic interference and a PANASONIC MDME102GCGM axis servo motor. Technical specifications of the 2130 2×3 M CNC milling machine - wo ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Reiser / parkland SCH 212/5 GM 150 Mowing/mulching and simultaneous collecting of grass, leaves, scrub, horse droppings, etc. Heavy, sturdy design: combination of truck chassis and superior flail, working width 1500 mm, container volume 5 m³, hydr. high dump (2,200 mm) as well as soil drainage through rear tailgate. Special features: 3 x adjusting possible hose rupture backups in the telescopic cylinders 11-speed adjustable cutting height 0-125 mm incl. ABE (General permission of operation) More mowing container stock!

Kistler 2151B30154002 Electromechanical NC joining module List price 19.000 € net The NC joining modules NCFH Type 2151B... consist of a robust housing in which a displacement sensor as absolute encoder and a piezoelectric push-pull force sensor are integrated. The compressive or tensile forces acting on the sensor generate a proportional electrical charge in the piezoelectric measuring element, which is converted into an analog voltage signal by the integrated charge amplifier. The drive motor is an electronically commutated AC hollow servo shaft motor controlled by a servo drive. Constant speed, i.e. constant travel speed, is ensured. Standard functions such as joining on block, position and force-controlled joining as well as processes on intermediate positions are supported. Specifications: with hollow shaft motor and compact design Integrated piezoelectric force sen ...

KEN 211-OS laboratory dishwasher High Capacity Laboratory Dishwasher The flexible machine for laboratories with high rinsing requirements The KEN 211-OS covers the need for quality washes in laboratories Advantages Washing of instruments in up to 2 levels High capacity User-friendly and ergonomically correct front operation Front display with plain text Low noise level Low energy and chemical consumption for the benefit of the environment and the economy Minimal maintenance and servicing Specifications: Height 140 cm Width 60 cm. Depth 64 cm. Electrical connection 380 Volt 3N 50 Hz Power 6,6 kW Product condition: Condition: Without plug ? More items - new and used - can be found in our shop! International shipping costs on request!

Dear's Sale, Stork DRO218 engine's Up block, comp cover, piston, conrod, pump, liner... Ready for transports. Best Regards info@kscege.com

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

Used Gestetner 211 K to prepare

SPK KB 2132 eccentric press was manufactured in the USSR in 1980. Operating with a force of 160 tonnes, the press of almost indestructible design offers the highest quality and precision during the most demanding workpiece machining. The machine’s equipment includes among others a pneumatic clutch, a large-area slider performing up to 71 strokes per minute, central lubrication and manual control. The total weight of the press is 13200 kg. Technical data of the SPK KB 2132 press - maximum press force: 160 t - work table dimensions (L x W): 1000 x 700 mm - maximum slider stroke: 160 mm - minimum slider stroke: 25 mm - slider dimensions (L x W): 580 x 460 mm - slider adjustment range: 120 mm - slider stroke rate: 71/min - intermediate plate thickness: 110 mm - distance between work table and slider (slider in lower position, largest stroke, connector unscrewed): 480 mm - bore ...

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Wiedenmann front sickle mower working width 2100 mm, rear discharge. Air-filled tires, dome triangle Kat. 0., external nipples for blade bearings. For PTO 2,000 1/min in clockwise direction. Other mowers for various brands in stock! - Jodau environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Control Fanuc ... i Series Turning diameter ... 600mm Turning length ... 330mm Inclined bed Spindle bore ... 61mm Turret Circumferential diameter over bed ... 600mm Circumferential diameter via support ... 400mm Axis X ... 205mm Axis Z ... 340mm Rapid traverse of the X axis ... 30m/min Rapid traverse of the Z axis ... 36m/min Spin speed... 0-6000 rpm. Max. spindle torque ... 127Nm Main engine power ... 11/15kW Doosan Robot Cell Assembly: 2x LYNX 2100A + ROBOTEC APC7 (Fanuc AM-100 iC6L) - The machines are supplied with chucks and pliers - High pressure cooling 20bar - Arm for picking up workpieces (Ø65 x L130 mm, weight 3 kg) - Automatic door opening - Spindle bladders for cleaning the clamping jaws - Oil separator - OIL SKIMMER - Tool Load Monitor (works with X-, Z-axis and S-spindle) - Workpiece conveyor The machine is in good condition, possible to test un ...

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

Belt conveyor, Herber, approx. 3.63m long – used - Price ex location (net): only 795.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos45 Manufacturer: Herber Type: GF-210-NB-500 MA Year of Make: 2010 Length: approx. 3.63m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

Belt conveyor, Herber, approx. 4.10m long – used - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos46 Manufacturer: Herber Type: GF-210-NB- 500 MA.bl Year of Make: 2010 Length: approx. 4.10m Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.

Ascend conveyor / belt conveyor, Herber, approx. ?.10m long – used - Price ex location (net): only 825.-€ incl. dismantling, packing and loading! Please note our other advertisements for this location resolution: A total of almost 90 positions of conveyor technology are available. including belt conveyors between 70cm and almost 4.50m in length, various belt curves, ejectors, inclined conveyors, as well as various folding storage boxes, picking trolleys, packaging machines, etc.! Pos47 Manufacturer: Herber Type: GF-210-NB-500 MA Year of Make: 2010 Length: approx. ? Nominal width: approx. 500mm Element width: approx. 60cm Engine: SEW Condition: good Available now Location: CZ, Bor, later camp Frankenberg / Saxony

Handtmann VF 616 + PLH 216 hanging line Z-Version”, consisting of vacuum filling machine Handtmann VF 616, with linking device 34-5, for filling, portioning, linking, monitor control, servo drive, loading device, filling capacity 3.600 kg/h, pressure up to 45 bar, including Handtmann hanging line PLH 216 with casing holding device 216, and hanging unit 241-16 and 216-22, all machines will be refurbished after confirmation of order.

PLOT ELECTRONICS SENTINEL N 2160 CNC router was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table by means of a reliable, high-speed spindle. X,Y,Z axes are in turn driven by reliable servo drives, which provide appropriate acceleration and speed in each direction. All this is complemented by a light, yet rigid design that eliminates any vibrations during even the most intense challenges. The offer price includes extensive equipment, consisting of, among others, a vacuum pump and advanced cncGraF Pro software. The SENTINEL N 2160 CNC milling machine weighs approximately 2000 kg. Technical specifications of the PLOT ELECTRONICS SENTINEL N 2160 milling machine - software: cncGraF Pro - mach ...

Technical details Input voltage: 220 V Input frequency: 125 Hz Input current: 8 A Noise level: 65 dB Protection type (IP code): IP67 Power take-off speed (max.): 1,500 rpm (The electric motor has been used for retrofitting diesel-powered trucks to electric or hydrogen-powered ones. A hydraulic pump can also be added to it. A drawing of the electric motor with an attached pump is provided.) The Permanent Magnet Synchronous Motor (PMSM) is an AC electric motor that uses permanent magnets in the rotor instead of electromagnetic windings, resulting in high efficiency, power density, and a high torque-to-inertia ratio. These motors require complex, digitally controlled inverters for operation and are used in high-performance applications such as robotics, electric vehicles, and high-efficiency appliances like washing machines. Rotor: Unlike induction motors, the rotor is equ ...

VERTICAL LATHE FAMAR MODEL: ERGO 210 YEAR: 1995 SERIAL NUMBER: FAMAR NR. 95/12 MAX MACHINABLE DIAMETER 200 MM LENGTH OF WORKPIECE MAX MACHINABLE 150 MM X-AXIS STROKE: 340 MM Z-AXIS STROKE: 215 MM FAST AT 60 M/MIN ASA CHUCK NOSE 6 " SPEED: 6000 RPM

Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The  ...

4 Used DESMI NSL125-215C/D02 Pumps with Danfoss EM-PMI Motors (2023) We are offering four (4) high‑performance used DESMI centrifugal pumps, model NSL125‑215C/D02, each fitted with a powerful Danfoss EM‑PMI electric motor. All units were manufactured in 2023, have seen limited operational hours, and are in excellent mechanical condition—ideal for marine, industrial, and high‑flow applications. Pump Specifications (DESMI NSL125-215C/D02) Flow rate: 250 m³/h Head: 49.63 mLC RPM: 2967 Impeller Ø: 219 mm Power: 55 kW Pump No.: 524965-01-03 Production year: 2023 Certified with CE and UKCA markings Motor Specifications (Danfoss EM-PMI300-T310 Series) Voltage: 500 V Power: 55 kW Speed: Up to 4000 rpm Torque: 177 Nm Cooling: IC 71 W IP Rating: IP65 Mounting: IM3001 Weight: 125 kg Manufactured: 2023 High‑efficiency permanent magnet motor technology Con ...

The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg

Make: YORK Type: YCAA B 210 LN Power: 149kW Refrigerant: R407C 4 compressors Make: YORK Type: 015-02874-992 Pressure: 25 Bar Max temperature: 63°C Min. Temperature: -35°C Price on request Contact details can be found under Contact

Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Siemens, Simodrive -Type: 6RB 2101-2A-Z -Overall dimensions: 300/460/H240 mm -Weight: 18 kg

Mesh Welding Machine Width: 1200 mm Length: 2000 mm Suitable for: Industrial products Consist of: -double magazine -line wire magazine of 2000 mm

Hydraulic motor, oil motor, hydraulic pump, compact rotators, oil-hydraulic drive -Manufacturer: Thumm, oil hydraulic drive Type 211 -Mounting holes: Ø 30 mm -Dimension: Ø 175 x 320 mm -Weight: 23 kg

Connecting cable, connecting wire, cable line, socket cable, socket line, sensor line -Manufacturer: Murr Elektronik, M8 female 0° free lead end unused original packaging -Type: 7000-08041-2100500 -Mat-No.: Code 47218 -Package dimensions: 220/220/H10 mm -Weight: 0.2 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/185 mm -Dimension: Ø 210/90 mm -Weight: 6 kg

Moving bezel, bezel, setting stick, lynette -Bezel. Moving, from WMW DLZ 800 lathe -Max. passage: Ø 210 mm -Technical drawing: see photos -Dimensions: 440/430/H700 mm -Weight: 66 kg