135,344 used machines on RESALE, but how to find them? Machine Search
Key data: 650 mm, 1500 mm
Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...
4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 3,100 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 Operating System Minimum Quantity Spraying Tensioner detection and automatic displacement 6 pneumatic material clamps 2 material stops Loading is included in the price
5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Pendulum operation through two light barrier areas Manual control panel Loading is included in the price Weight: approx. 8,500 kg
Inv. Num. : 8809 Type: V-30i Producer: Leadwell Created: 2012 Parameters: Control System: FANUC Series Oi-MD Switch-on hours: 32488 h Hours: 9273 h Work table length: 890 mm Work table width: 500 mm Maximum table load (even): 300 kg Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 410 mm Travel travel Z-axis: 610 mm Machine weight: 4500 kg
CNC controller: BROTHER Axes X-axis travel mm: 450 Y-axis travel mm: 320 Z-axis travel mm: 410 Worktable Table dimensions mm: 550x350 Spindle Spindle speed rpm: 12000 Tool system Tool holder: BT-30 Tool magazine slots: 26
CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cabin 54 pallet Storage Gressel (ø340 x 348mm x 89kg ) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operatin ...
Control: NCT table-size: 700 x 500 mm coolant: ja Tool bore: SK 50 2 clamping devices 20-position tool changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control Siemens 840D powerline Travel X/Y/Z 630/630/630 mm 2-fold pallet changer Speed 10000 1/min Knoll coolant system with paper belt filter Tool holder: SK40 Tool magazine 80 spaces
x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 660 mm, 983 mm
CONTROL PANEL FANUC F31-IA5 AXIS MOVEMENT X 750 MM / Y ± 210 MM / MM / Z 1.220 MM ROTARY AXIS MOVEMENT B + / - 120 ° / C 360 °/ 0.001 ° MAX. TURNING DIAMETER 660 MM MAX. TURNING LENGTH 983 MM SPINDLE - 1 CHUCK SPİNDLE SPEED 3.000 MIN/-1 CHUCK DIAMETER 12 INC / 315 MM BAR CAPACITY 90 MM TOOL SPINDLE SPEED ( S1 ) 12.000 MIN/-1 TOOL HOLDERS CAPTO C6 NUMBER OF TOOL POSITION 100 SPINDLE - 2 SPİNDLE SPEED RANGE SUP SPİNDLE 3.000 MIN/-1 CHUCK DIAMATER SUP SPINDLE 12 INC / 315 MM WEIGHT OF THE MACHINE 22.300 KG DIMENSIONS OF THE MACHINE 5.33 X 3.27 X 2.93 M
Heller MC16 Nr 31-43514 BJ. 2009 Spindle revolutions 1/min. 45-16000 Psbmlb Sswffd Ssaljrd SK40 Travel Distances mm X 630 Y 630 Z 630 Travel speed mm/min 1-40000 Number of tools 80 Tool diameter mm 70/150 (for free secondary spaces) Tool length mm 320 Number of pallets 2 Dimensions pallets 400 x 500 Max. pallet load KG 500 B Axis NC Control system Sinumerik 840D Probe Heidenhain Yes Power kVA 60 Machine No. 73 ATL iTM400HP nr.14916 BJ.2009 Power kVA 30 Standard deburring chamber 400 / 400 mm Max. gas filling pressure 20 bar Siemens Multipanel with Windows CE operating system
Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.
x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment.
WORKING RANGE -CUBIC- X-axis travel: 1270 mm Y-axis travel: 660 mm Z-axis travel: 635 mm SPINDLE / HEAD spindle revolutions (max): 7500 /min BASIC FUNCTIONS number of spindles: 1 number of turrets: 0 live positions: yes number of c-axes: 0 number of y-axes: 1 number of b-axes: 0 ATTACHMENTS chip conveyor: yes WORKING RANGE TURNING swing diameter (max): 635 mm worpiece length max.: 1372 mm workpiece weight max.: 1814 kg MAIN SPINDLE spindle revolutions (min): 0.001 /min spindle revolutions (max): 7500 /min X/Z SLIDE Z-axis travel: 635 mm X-axis travel: 1270 mm Y-axis travel: 660 mm TOOL MAGAZINE tool diameter max.: 178 mm tool length max.: 406 mm tool weight max.: 13.6 kg
Inv. Num. : 8848 Type: VX 15 Producer: HURON Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Work table length: 1700 mm Work table width: 810 mm Maximum table load (uniform): 2000 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 1510 mm Y-axis travel: 810 mm Travel Z axis: 810 mm Cone: ISO 40 Number of all tools: 24 pieces Machine height: 4000 mm Machine length: 5400 mm Machine width: 3310 mm Machine weight: 14500 kg Equipment: Conveyor Central air cooling Washing gun Probe Blum Rulers
Inv. Num. : 8854 Type: MINIMILL HE Producer: HAAS Created: 2006 Parameters: Control system: HAAS Work table length: 914 mm Work table width: 305 mm Maximum table load (uniform): 227 kg Spindle drive power: 7.5 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 406 mm Y-axis travel: 326 mm Z-axis travel: 381 mm Cone: ISO 40 Number of all tools: 10 pieces Machine height: 2565 mm Machine length: 2119 mm Machine width: 2077 mm Machine weight: 2018 kg
turning diameter: 250 mm turning length: 555 mm control: FANUC 18i-TB spindle turning speed range: 50-4500 + 5000 U/min turret head: 2x 24 12 angetrieben Dimensions (L/W/H): 8000 x 2300 x 2400 mm weight of the machine ca.: 7.5 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HAAS ST-20Y CNC lathe was built in 2022 in the United States by Haas Automation Inc. The machine has only worked for 119 hours to date and is like brand new. The HAAS ST-20Y is an excellent choice for the modern business. This is because it makes it possible to perform versatile 4-axis machining of the highest quality on any workpiece. All machining processes, i.e. milling, threading and drilling are performed by means of driven tools and a spindle with synchronised C axis. The 12-position BMT turret offers high productivity thanks to the larger contact area between tooling, toolholder and the turret itself. The operator, on the other hand, has at their disposal an advanced HAAS CNC control with a Visual Programming System (VPS), which significantly improves the daily operation of the machine. The VPS uses graphical templates to facilitate the creation of G-codes for even the most ...
Vertical machining centre BRIDGEPORT GX 1600 - travel 1600x700x635 mm, CNC FANUC 0i-MD - coolant thrugh spindle, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 1700x700 mm, Longitudinal travel x axis: 1600 mm, Cross travel y axis: 700 mm, Vertical travel z axis: 635 mm, Working feed x-y-z axes: 0 - 36.000 mm/1, Rapid feed x-y-z axes: 36 mt/1, Spindle taper type: 40 DIN-BT, Automatic tools change nr.: 30, Spindle speed: 0- 12.000 rpm, Spindle motor power: 22 Kw, Cnc: FANUC 0i_MD, Approx net weight: 10.000 Kg, accessories: Chip conveyor, coolant tank, coolant thrugh spindle
x-travel: 610 mm y-travel: 510 mm z-travel: 610 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip tank - electronical hand wheel Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FANUC 18i MB Number of axles: 4 St. x-travel: 710 mm y-travel: 610 mm z-travel: 650 mm b-axis: 0.001 ° size of pallet: 500x500 mm tool piece magazine with: 60 milling spindle: BT40 spindle turning speed - stepless: 15000 U/min chip conveyor: kW misc. accessories: weight of the machine ca.: 15 t dimensions of the machine ca.: 5.1 x 3.7 x 3.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
3-axis machining centre with automatic tool changer for aluminium or PVC profiles Max. travel X-axis: 3,850 mm Max. travel Y-axis: 350 mm Max. travel Z-axis: 280 mm Control E 550 Speed infinitely variable up to 21,000 rpm Manual control unit Minimum quantity spraying Automatic tool change with magazine (4 places plus angle head) Tensioner detection and clamp displacement 4 pneumatic material clamps light barrier Weight: approx. 2,000 kg
turning length: 4.500 mm greates pass round over bed: 810 - 760 mm swing diameter over slide rest: 740 mm control: SIEMENS - 840 C max. turning diameter: 800 mm turning diameter over slide: 740 mm travel -x2 axis: 875 mm travel -z2 axis: 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
TBI MVC 1890 CNC vertical machining center was built in 2023 in Poland by TBI Technology Sp. z o.o. The machine has worked very little over its service life. During the last maintenance, the spindle was replaced with a new one worth €10 000. The MVC 1890 CNC machining center on offer is an excellent choice for machining heavy workpieces with a maximum weight of 2500 kg. The state-of-the-art technical solutions used in it guarantee the best precision and efficiency. These include, among others, a reliable, high-speed main spindle. Thanks to its temperature stabilisation (oil cooling), the spindle does not deform thermally and maintains a constant temperature during heavy-duty, high-speed operation. The cutting tools, on the other hand, are continuously cooled during the machining operation, which increases their overall durability. All axes are driven by efficient digital drives w ...
x-travel: 4500 mm y-travel: 800 mm z-travel: 600 mm control: HEIDENHAIN iTNC 530 rapid traverse: 30/40/40 m/min table surface area: 5300 x 750 mm table load: 4,5 t tool taper: DIN 69871-A40 turning speeds: 30 - 6000 U/min spindle motor: 29 kW spindle distance: 325 - 925 mm tool piece magazine with: 30 Plätzen total power requirement: kW weight of the machine ca.: ca. 20 t dimensions of the machine ca.: m equipped with: - CNC-Control Heidenhain iTNC 530 - IKZ 20 bar - NC Swivable Table - Chip Conveyor - Coolant - Tool Changer 30-fold (SK 40) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.
x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...
CINCINNATI MILACRON DART 750 CNC vertical machining center was built in 1999 in the UK by Cincinnati Milacron U.K. Limited. The machine, designed for machining workpieces with a maximum weight of 455 kg, is distinguished by its outstanding precision, efficiency and reliability. The machining process is performed on a large work table with a length of 950 mm and a width of 520 mm, by means of a high-speed spindle and cutting tools taken from a 21-position magazine. High process stability, even during the most intensive challenges, is in turn ensured by an extremely rigid design made of top-quality steel. All this is completed by a CNC controller with dialogue programming. The CINCINNATI MILACRON DART 750 CNC machining center weighs approximately 3500 kg. Technical specifications of the CINCINNATI MILACRON DART 750 CNC milling machine - CNC controller: ACRAMATIC 2100 - number of axes: ...
1 set = 3 new centring units, zero point system, Micro grip 50, Parotec, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - Comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Key data: 316 mm, 340 mm
CNC LATHE FOR GENERAL PURPOSE TURNING
x-travel: 2100 mm y-travel: 1020 mm z-travel: 762 mm Control: Fanuc MXP-200FP spindle speed: 6000 U/min spindle capacity: ca. 22 kW max. torque on the spindle: ca. 550 Nm tool taper: SK 50 table surface area: 2300 x 1020 mm max. table load: 3000 kg T-slots: 6 x 22 mm T-slot - distance: 150 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 8871 Type: Emcomill E 1200 Producer: EMCO Created: 2011 Parameters: Control system: Fanuc Switch-on hours: 28317 h Operating hours: 12114 h Work table length: 1340 mm Work table width: 650 mm Maximum table load (uniform): 1500 kg X-axis travel: 1200 mm Y-axis travel: 610 mm Travel Z axis: 500 mm Machine height: 3060 mm Machine length: 3200 mm Machine width: 3350 mm Machine weight: 10000 kg 2025: New Z-axis motor Spindle overhaul
chuck diameter: 500 mm swing diameter over bed slide: 700 mm control: Siemens travel -x axis: 630 mm travel -z axis: 500 mm CNC turning and milling center vertical | EMAG - VMC 450 MT The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VMC450MT | VMC 450MT | VMC-450 | VMC-450MT The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
WAFO VS-8 SMART CNC machining center was built in 2022 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine was used occasionally and has worked a small number of hours. The WAFO VS-8 SMART is an excellent choice for both unit and small batch production of precision parts. The machine with its compact design is distinguished by carefully selected components with the best technical parameters, which guarantee outstanding performance over its entire service life. Workpieces with a maximum weight of 150 kg are machined inside a fully enclosed cabin by means of a high-speed spindle and cutting tools taken from a 20-position magazine. Process stability, on the other hand, is ensured by an extremely rigid bed, which eliminates any vibration and oscillation on an ongoing basis. All this is complemented by the extremely easy-to-use SIEMENS CNC control with ShopMill overlay a ...
turning diameter: 400 mm turning length: 1100 mm control: Siemens Sinumerik 840D SL greates pass round over bed: 500 mm Swing dia. over traverse guideway: 370 mm Main spindle:: Max. rpm: 5000 min/-1 power capacity - main spindel: 17 / 25.5 kW max. Torque: 345 Nm spindle diameter in front bearing: 130 mm spindle bore: 67 mm chucking diameter: 325 mm spindle nose: A8 axis stroke:: x-axis: 750 mm y-axis: +/- 100 mm z-axis: 1200 mm feeds:: rapid traverse: 40 / 40 / 40 m/min Tailstock:: tailstock: 1200 mm taper of center: Mk 5 tension force: max. 8 kN milling head: b-axis: +/- 120 ° tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/min spindle motor: 10,5 kW max. torque on the spindle: 90 Nm total power requirement: - kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 4,6 x 2,5 x 2,82 m Equipped with: - Siemens 840D SlimLine / Cel ...
travel -x axis: 900 mm travel -y axis: 200 mm travel -z axis: 800 mm B-axis swival range +/-: +90 / -20 ° positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PV315 | PV-315 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1020 mm y-travel: 510 mm z-travel: 510 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain 4. axis electronical hand wheel 20-fold automatic tool changer chip tank Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 510 mm Tischgröße / table size 1200x450 mm Werkzeugschaft / spindle taper BT40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 20 Gewicht der Maschine ca. / weight ca. 5000 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offered is a lead and feed screw lathe. Swing diameter over bed 710mm, over carriage 480mm. Distance between centers 1000mm. Spindle bore 71mm. Speeds 18-800rpm (12 steps). Motor power 7.5kW. Machine weight approx. 3070kg. Equipped with Heidenhain digital readout, chip protection wall, splash guard, coolant system, and four-position tool post. Repaired and inspected prior to storage. Inspection possible by prior arrangement.
General Manufacturer: Hermle Type: C 40 U Year of Make: 2005 Control: Heidenhain TNC 430 Travels: X 850 mm, Y 700 mm, Z 500 mm B swivel axis Working spindle Speed: 28,000 rpm Tool/movement Tool changer: 38-speed Tool holder: HSK63A Dimensions and weight Weight: 10,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included Spindle coolers IKZ high-pressure system 80 bar Blum Laser Measurement Workpiece probes Electric Handwheel HR410 Chip conveyor Oil mist extraction
Inv. Num. : 8880 Type: MCV 500 QUICK Producer: MAS Created: 2003 Parameters: Control System: FANUC Series 2ti-MB Work table length: 800 mm Work table width: 500 mm Maximum vertical spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Machine height: 2550 mm Machine length: 2085 mm Machine width: 1900 mm Machine weight: 3800 kg
Inv. Num. : 8881 Type: PRO-1000 A Producer: Hartford Generated: Parameters: Control system: FANUC Work table length: 1150 mm Work table width: 600 mm Maximum spindle speed: 8000 1/min X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Machine weight: 6000 kg Equipment: Tools
x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: iTNC 530 Heidenhain Main spindle:: power capacity - main spindel: 13 / 9 kW turning speed range - main spindle: 20 - 10.000 min/-1 Torque: 83 / 57 Nm tool taper: SK 40 tension force: 10 kN work table:: table surface area: 790 x 560 mm number of T-slots: 4 + 1 T-slot - width: 4 x 14H12 / 1 x 14H7 mm T-slot - distance: 100 mm max. table load: 600 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg Total weight, approx.: max. 60 kg feeds:: feed speeds: max. 20.000 mm/min Feed force: 5 kN input unit: 0,01 mm rapid traverse: 30 m/min total power requirement: 20 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,5 x 4,0 x 2,8 m Documents: Coolantsystem: high pressur ...
CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Travels: Turning length: 900 mm Turning diameter max. 630 mm X-axis 580 mm Y-axis 160 mm (+80/-80 mm) Z-axis 935 mm B-axis 225° (-30° / +195°; 0.001° steps) C-axis 360° Mount: HSK-A 63 Total tool stations: 40 locations Spindle speed: 50 – 5,000 rpm Accessories: - Chip conveyors - Tailstock design NC-controlled, MT5 - Touchsetter - High-pressure pump IKZ 40 bar - Renishaw touch probe prepared - 3-jaw chuck Kitagawa B212 Ø304 mm
Vertical machining center Travel x/ y/ z = 1020/ 600/ 500 mm Table size 1250 x 600 mm max. workpiece weight 800 kg Tool magazine 32 Tool positions HSK 63 Rapid traverse 70 m/min CNC control Heidenhain iTNC 530 Chip conveyor Coolant system
Inv. Num. : 8902 Type: Vesta 1000 12K Producer: Hwacheon Created: 2016 Parameters: Control System: FANUC Series Oi-MF Hours: 15976 h Work table length: 1100 mm Work table width: 502 mm Spindle drive power: 11 kW Maximum spindle speed: 12000 1/min X-axis travel: 1000 mm Y-axis travel: 550 mm Travel Z axis: 500 mm Cone: BT40 Max. tool length: 300 mm Max. tool weight: 8 kg Max. tool diameter: 80/150 mm Rapid traverse X/Y/Z: 36/36/30 m/min Machine height: 2670 mm Machine length: 3335 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool probe Workpiece Probe 4th axis TSUDAKOMA
Inv. Num. : 8906 Type: MV 154 APC E 12B Producer: Quaser Created: 2012 Parameters: Control system: FANUC Oi-MD Work table length: 800 mm Work table width: 500 mm Maximum table load (even): 250 kg Spindle drive power: 11/18.5 kW Minimum vertical spindle speed: 50 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 700 mm Y-axis travel: 500 mm Travel Z-axis: 560 mm Cone: ISO 40 Machine height: 3080 mm Machine length: 4250 mm Machine width: 2850 mm Machine weight: 8500 kg Equipment: Chip conveyor Pallet Changer Workpiece Probe Tool probe
Travel X/Y/Z: 650mm/400mm/425mm, table dimensions X/Y: 545mm/540mm, max. table load: 500kg, speed: 10000rpm, tool stations: 20, rapid traverse: 30m/min, feed rate: 20m/min. Machine dimensions X/Y/Z: approx. 3400mm/2100mm/2800mm, weight: approx. 5500kg. On-site inspection is possible.
maximum number of results exceeded
please refine your search
