tankbau schneider used for sale

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...

+ + + Availability / Delivery time / Pre-order + + + The non-binding estimated delivery time is approx. 3-5 months (+/-) (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can be placed. - - - - - Net price: 3.150 € (excl. VAT) gross price: €3,748.50 (incl. VAT) - - - - - PTO generator 38 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - Data of the PTO generator: - Power: 38 kVA - Voltage: 230 / 400 volts - AVR ESC - Dimensions: 95 x 80 cm - Weight: 179 kg - - - - - Digital Display: - Volt - Display (V) - Ampere - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 428 rpm - Recommended tractor power: 90 - 100 hp - - - - - Sockets: - 1x 400V 63A - 2x 1-phase socket  ...

Ruck Zuck Dough Cutter Cake Cutter/14 wheels/smooth/wavy? Product? New, unused? Brand: Schneider? Material: stainless steel? Version: 14 wheels: 7 wheels smooth and 7 wheels serrated The cutting width is flexibly adjustable and can be fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cm? Cutting width: 1 - 12.5 cm See pictures for details

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

+ + + Availability / Delivery time / Pre-order + + + The non-binding estimated delivery time is approx. 3-5 months (+/-) (Provided that there are no unforeseeable delays or supply bottlenecks in between) --> A pre-order can be placed. - - - - - Net price: 4.850 € (excl. VAT) gross price: €5,771.50 (incl. VAT) - - - - - PTO generator 65 kVA with AVR -> More models with 18 - 80 kVA can be found in our other displays - - - - - Data of the PTO generator: - Power: 65 kVA - Voltage: 230 / 400 volts - AVR ESC - Dimensions: 120 x 80 cm - Weight: 335 kg - - - - - Digital Display: - Volt - Display (V) - Ampere - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Meters - - - - - Requirements for the tractor: - PTO speed: 400 rpm - Recommended tractor power: 120 - 130 hp - - - - - Sockets: - 1x 400V 125 - 1x 1-phase socke ...

Condition: Very good condition

Schneider paper shear

Thermoforming machine for small cups of olive oil, ham, honey etc. Themachine make the full process with thermoforming, filling , sealing and cutting. PLC and Touchscreen, dosing with servomotor. Electric photocell for spot. Top brands in electronic components, as Omron, Datalogic, Panasonic, Schneider. Further information please contact. we produce it in Spain. The machine is tested some years ago, good thermoforming with PET, dosing with no dropping and good sealing and easy open. Production depending of each model.

faceplate diameter:8000 mm swing diameter:10000 mm turning height:4500 mm workpiece weight:120/200 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2300 mm slide stroke:horizontal: 5300 mm cross section of ram:300x300 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:270 t Machine size (LxWxH):14000x10000x9000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the ri ...

APPLICATIONS: - Paving manufacture - Curb manufacture - Concrete block manufacture for: - masonry - foundation - posts - floor slabs - chimneys - gutters - roadway gutter covers ADVANTEGES: - Vibrators on tamper head. - Bunker and drawer for finishing layer of paving and kerbs. - High productivity - active area 1,10 x 0,6m - Automatic operation: PLC (Mitsubishi Electric) logic programmer + touch display + software for automatic machine operation; Schneider Electric electrical command and control components - Our wide range of moulds can ensure a diversified production. - Reliable mechanical and hydraulic systems. COMPONENTS: B79qqiplcm - Press unit - Pallet space - Pallet feeding line - Hopper and drawer (1) for feeding the mould with concrete - Hopper and drawer (2) for making the finishing layer (paving, kerbs) - Pall ...

PE 300 plastic recycling and regranulation line was built in China in 2011 by Zhangjiagang Wuhe Machinery Co. LTD. The extruder for plastics used in the processing and manufacturing of various types of materials can produce up to 300 kg of parts in one hour of operation. The complete PE and PP plastic extrusion line includes a compactor, screw, cylinder, conveying system, heating system and temperature control panel. Material production begins by heating the plastic to a maximum temperature of 300°C in the 11 heating zones of the PE 300 granulating line, controlled by thermoregulators. The extruder then presses the material further through a 100 mm diameter screw located in a cylinder with abrasion and rust protection. At the end of the process, the machine head moulds the plastic to give it the right properties and shape. The PE 300 extruder is equipped with thermoregulators with ...

Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.

The compressor is currently still in use in our workshop. It will be dismantled in the short term. The net price is: € 500,00 and is negotiable. Year of construction: 1982 Content: 250 L Permissible operating overpressure: 16 bar Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

ELMETHERM 27 x 4.4 m furnace for plastic pipes was manufactured in 1997 in France. The furnace is used in the process of heating and shaping single-layer plastic pipes with a maximum wall thickness of 3 mm and a diameter from 8 mm to 35 mm. The workpieces are preheated in the machine’s heating pipes and then vulcanised and shaped at 168°C. At the very end, the plastic pipes are moved to a special cooling tunnel, where they are cooled with air at 42.8°C. Automated heat treatment of large quantities of workpieces is possible due to the use of conveyors in the machine that transport the workpieces between the different stages of the process. All functions, such as switching on heating or cooling, are controlled via the SCHNEIDER MAGELIS HMI touch panel. The gas furnace for moulding PA plastic pipes weighs approximately 35000 kg. Technical data of the ELMETHERM 27 x 4.4 m industri ...

for format 132 cm

+ + PRE-ORDER + + Due to the current high demand, this model is currently sold out. It is already reordered. The estimated production time is 8-12 weeks. You can pre-order the PTO generator of your choice from us. - - - - - PTO generator 80 kVA Year of construction 2021 - NEW Description: - PTO generator - 80 / 88kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 400 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt (125 A) Other equipment: - Residual current circuit breakers (from Schneider Electric, Germany) - Circuit breakers (from Schneider Electric, Germany) --> Other PTO generators with 18 kVA to 65 kVA are available. Price: - 5.750,- € + 19% VAT = 6.842,50 € Dispatch: - A Germany-wide transport includin ...

Discover our wide selection of 1000kVA transformers from well-known manufacturers such as Schneider, SGB, Pauwels and other trusted brands. These transformers are specially designed for reliable power distribution in various industrial applications. Features: Reliable performance: Our 1000kVA transformers provide efficient and reliable power distribution and ensure optimal operational safety for industrial processes. Voltage Options: Choose from a variety of voltage options to meet your specific project needs. Each transformer is equipped with primary and secondary voltage specifications to ensure high flexibility. Well-known manufacturers: We offer transformers from reputable manufacturers such as Schneider, SGB, Pauwels and other trusted brands that are synonymous with quality and reliability. Rugged Construction: Designed for demanding environments, these transformers feature ...

+ + + PRE-ORDER + + + Due to the high demand, all PTO generators are currently sold out. All models are reordered and are in production. Unfortunately, an exact completion date is not yet known, as there are supply bottlenecks for important components that are required for production. Longer delivery times may be expected. A pre-order can be placed. - - - - - PTO Generator / PTO Generator --> This PTO unit is available in the power classes 18 - 65 kVA. List with prices can be found below in the text. Description: - PTO generator - 18 kVA / 22 kVA / 27 kVA / 38 kVA / 65 kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 428 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt Other equipment: - Residual current circuit breakers ( ...

3-cylinder piston compressor SCHNEIDER UNM 360-8-40 WXSM Clean Mint condition 28 hours of operation Baujehr 2017 Weight 106 kg 230 volts / 2.2 kW Suction capacity 360 l/min max. pressure 8 bar Direct-coupled 3-cylinder piston compressor Mechanical hour meter to check the actual running time Compressed air cooler, pre-filter and ultra-fine filter for optimal operation of the membrane dryer Maintenance-free membrane dryer for dried and purified compressed air Equipped with thermo-controlled exhaust ventilation Extremely quiet and suitable for use in the workplace thanks to the soundproofing hood Oil-free, low-maintenance unit Low operating temperature due to optimal cooling ensure a guaranteed 80% duty cycle Mobile thanks to swivel castors Original price: 4.600,- EUR net

Compressed air boiler standing Fabr. SCHNEIDERMachine -No: 478517 / CE 0044, year of construction 2000Boiler capacity: 750 lMax. Operating pressure: 11 barWeight approx: 265 kgDimensions: 2200 x 800 x 800 mmWith- standing version- lacquered versionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

1. HEAT CLEANING OVEN Cycle time : 2 - 4 hours Loading : Trolley, manual loading from the door side INTERNAL USEFUL DIMENSIONS Length : 1.870 mm Width : 1.460 mm Height : 1.500 mm (gross) 1.000 mm (net) Interior volume : 4,1 m³ Insulation : Ceramic wool + Rock wool Insulation thickness : 175 mm Maximum temperature : 1.260˚C Heating type : Direct heated Heating source : Natural Gas, LPG or Diesel Combustion chambers : 2 sets Burner capacity : 2 x 350.000 kcal/h Burner : RIELLO (Italy) Overheating control : Stainless steel water spray nozzles – 2 pc Safety control : Stainless steel water spray nozzles –4 pc Oven safety door : 1 set Electrical panel : PLC controlled, Schneider Electric branded switchgear components Control system : Touch screened panel and software system MATERIAL Oven body : Structural steel and sheet metal, spray pa ...

Servo motor, electric motor, DC motor -Speed: 67 rpm -Power: 8.9 NM -Voltage: 24 V DC -Construction: B5 -Shaft diameter: Ø 10 mm -Dimensions: 170/67/H67 mm -Weight: 1.2 kg

Compact compressor make SCHNEIDER type 100 KITTMachine -No: 382 built in 1993Technical specifications:maximum pressure: 15 barSuction capacity: 85 l / min.Filling capacity: 49 lDrive power: 0.55 kWSpeed: 1415 rpm.Tank volume: 2.7LExternal dimensions approx.: 530 x 350 x 2400 mmWeight approx.: 21 kgPower connection: 220 V / 50 Hzused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Timing relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor, compact smart relay -Manufacturer: Schneider Electric -Type: SR1 A201BD -Dimensions: 125/90/H55 mm -Weight: 0.3 kg

Hydr. Furnace pipe pulling machine make SCHNEIDERYear of construction 1994Working range: 60 - 220 mmWorking stroke: 120 mmElectricity requirement: 0.75 kWDisplacement of the tube counterholder: 750 mmPower connection: 380 V / 50 HzOutside dimensions approx: 2000 x 750 x 1570 mmWith- 14 pulling tools: 60; 70; 80; 90; 95; 100; 120xa0xa0 130; 140; 150; 170; 180; 200; 220 mm- Manual operation- Automatic mode- Two-hand releaseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

NH fuse -NH 1 -200 A 500 V AC 440 V DC -Price: per package -Number: 4 pieces -Weight: 1.1 kg

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OE 1,5kW / VF1530-1500W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 40000mm/min - Maximum acceleration: 0.5G - Maximum load: 1200kg - Nominal power: 1.5kW - Energy requirements: 12.0kW - Source brand: MAX Photonics - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 4500mm - Width: 2300mm - Height: 1920mm Cutting thickness - Carbon steel: Recommended thickness 12.0mm, maximum thickness 16.0mm - Stainless steel: Recommended thickness 5.0mm, maximum thickness 6.0mm - Aluminum: Recommended thickness 3.0mm, maximum thickness 4.0mm - Brass: recommended thickness 2.0mm, maximum thickness 3.0m ...

Manufacturer: Schneider-Senator Model: E-Line 78 year: 2009 Available: 01.May 2022 Location: germany Price: on request

: gebraucht / neuwertiger Z : 2020 : 8208 : Taiwan : 49900 € : 1 : 3100 mm : 3.5 mm : 2.5 mm : 135 ° : 3.7 kW : 4300 mm : 1770 mm : 1890 mm : 4520 kg : 800 mm 2 axes CNC control Schneider 7 ",touchscreen segmented tool(6x150, 10x125, 5x100, 6x75mm segmented) motorized backgauge 800 mm user manual in GERMAN and English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

P/N: 190.101 // S/N: 1107

P/N: 190.101 // Fabr. No.: 783

NH fuse -NH 3 -630 A 500 V AC -Price: per package -Number: 4 pieces -Weight: 3.2 kg

NH fuse -NH 3 -400 A 500 V AC -Price: per package -Number: 5 pieces -Weight: 1.7 kg

Key data: 220 °C, 2000 mm

PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...

THERMISCHE REINIGUNG PYROLYSE-OFEN Zykluszeit : 2 - 4 Stunden Beschickung : Wagen, manuelle Beschickung Isolierung : Keramikwolle + Steinwolle Dicke der Isolierung : 175 mm Höchsttemperatur : 1.260˚C Heizungsart : Direkt beheizt Heizquelle: Erdgas, Flüssiggas oder Diesel Brennkammern : 2 Sätze Überhitzungskontrolle : Wassersprühdüsen - 2 Stück Sicherheitskontrolle : Wassersprühdüsen - 2 Stück Backofen-Sicherheitstür : 1 Satz Schaltschrank : PLC-gesteuert, Schaltgeräte der Marke Schneider Electric Steuerungssystem : Bedienfeld mit Touchscreen und Softwaresystem MATERIAL Ofengehäuse : Stahlkonstruktion und Blech, spritzlackiert 1. Brennkammer: Schamottestein und feuerfester Zement, 1.400˚C 2. Brennkammer: Schamottestein und feuerfester Zement, 1.260˚C BETRIEBSTEMPERATUR 1. Brennkammer: 250 - 600˚C 2. Brennkammer: 800 - 1.100˚C Durchmesser  ...

Included in delivery: 01x Chipboard / Floor covering for mezzanines, used Manufacturer: Schneider Type: Safety Floor Dimensions: approx. 2,550 x 1,000 mm (WxD) Chipboard thickness: approx. 38 mm Version: P6, grooved all around Color top: similar. Stone (anti-slip) Color underside: white Note: Steel springs with a cross-section of 25x3 mm in lengths of 4,050 mm and 850 mm can be purchased to match the chipboard. Prices on request. The chipboards are used and can have slight damage!

Used Carrier 30 RB 140R air cooled chiller on R-32 build in 2022. Complete with 4 Danfoss DSF155A4ACA scroll compressors, condenser with 2 fans - 50/60 Hz - 1,3/2,4 kW - 970/1130 RPM with an airflow of 39.254 m³/h, braced heat exchanger as evaporator, water pump, expansion vessel and a control cabinet with 3 Schneider Electric HVAC variable frequency drives and a SmartVu display. This chiller comes with a EC declaration. Specifications Brand: Carrier Type: 30 RB 140R Product type: Air Cooled Chiller Capacity kW: 140,0 Capacity Tons: 39,8 Refrigerant: Freon Refrigerant Type: R-32 Weight in kg: 917 Sizes: 2100x2270x1380 mm (LxWxH) Compressor(s) type & model: 4x Danfoss DSF155A4ACA Display: SmartVu Number of fans: 2 Fan specifications: 50/60 Hz - 1,3/2,4 kW - 970/1130 RPM Remarks |: Y.o.b. 2022

table diameter: 560 mm table load: 0,3 t swivelling range: 0-90 Grad table turning speeds: 0,25 - 4 U/min Torque: max. 360 N/m centre of gravity: max. 150 mm total power requirement: 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-H ...

table diameter: 700 mm table load: 0,6 t swivelling range: 0-90 Grad excentricity: 200 mm table turning speeds: 0,2 - 2 U/min Torque: max. 900 N/m total power requirement: 0,37 kW dimensions of the machine ca.: 1,1 x 0,92 x 0,8 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...

Side Tables, Light Bariers, Chromed Air Table, Program, Standard Accessories

EDDA packing machine, packing machine, pallet cutting machine, automatic wrapping machine ROBOWRAP EDDA wrappers are recognized as the best solution in the field of packaging. Modern Edda wrappers, based on the latest technologies, thanks to their strong mechanical design and the required systems ensuring operator safety, meet the EU requirements and are CE certified. Standard control system components come from top brands such as Siemens, Schneider and LG Industrial. The machines are designed for a long service life and do not contain any parts from the Far East. Edda wrappers are designed for packing products in PE bubble wrap, PE foam film and shrink wrap. The ROBOWRAP wrapper is ideal for packing: Pallets Large packages, cartons Door Specifications: Machine dimensions L x W x H: 1100 x 600 x 2200 Weight: 490 kg Battery Voltage: 24V DC Power supply: 220 V ...

Depalletizer OMA mod. DPB 2000/6 Year: 2013. Speed: 6.000 bph. Flap removal system. Inflatable bar depalletizing system Roller conveyor for full pallets inlet and empty pallets outfeed PLC SCHNEIDER Safety protections

Machine name: Dissolver Manufacturer: Schneider Maschinenbau Gmbh Type: SHDC15 KWFU Ex Year of construction: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Engine drive: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters 900 liter container Parts in contact with the product: Stainless steel Equipment: Hydraulically extendable Dimensions: Machine height approx.: 3100 mm, (upper part extended) Length, with container, approx.: 2200 mm, width with collet approx.: 1800 mm, pliers open Weight, without container, approx.: 1600kg Foundation load approx.: 6000 kg/m3 Empty weight: 1600 kg Tech. Documentation: Yes in PDF Accessories: Stainless steel mixing tank, Dissol glare: diameter 450 mm, Frequency converter Condition: Used Price: On request

Bench milling machine Wood milling machine Carpentry milling machine Type: TV700 4 speeds adjustable Milling fence with fine adjustment Milling fence with pressure device max. tool diameter 135 mm incl. milling shaft 30 mm suitable feeders can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Piston compressor SCHNEIDER type UniMaster UNM 580-15-90 DX Serial number: 10022047 Retail number: A715101 Year of construction 2014 Intake flow rate 580 litres/min. Filling capacity 470 litres/min. Pressure capacity 15 bar Boiler capacity 90 liters Sound level 95 dB(A) Motor power 4 kW Mains connection 400 Volt, 50 Hz (with 16 Amp. Plug) - 2 cylinders in row arrangement oil-lubricated - Compressed air unit with pressure reducer and fog lubricator - 1 piece of air connections with quick-change coupling via fog lubricator - 1 piece of air connections with quick-change coupling without lubricator - Condensate drain via ball valve - Pressure switch set to 15 bar- Running time from 0 bar to 10 bar cut-off pressure = 1 min, 50 sec. - Running time from 0 bar to 15 bar cut-off pressure = 2 min, 50 sec. - mobile, space requirement: L x W x H, 1100 x 500 x 1000 mm , weight: 116 kg , good conditio ...

Figure shows MIOTAL® TC 180 x 1000 Center width: 750 mm Center height: 165 mm Orbit diameter over bed: Ø 330 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circula ...