We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,595 used machines on RESALE, but how to find them? Machine Search
used
Pile cutting machine, stack cutter, face cutter SCHNEIDER type Senator 155 Rubber, paper and veneer shears Masch. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125 mm Application height 140 mm Backgauge max. 1550 mm Motor power Knife drive 5.5 kW Mains connection 380 volts, 50 Hz - 2-hand operation for stroke triggering - automatic pressing by hold-down presses the stack of paper onto the table - Kickback (backgauge) with digital dimension selection and sequence cut adjustment via control - Backgauge adjustment via servo motor (motor and control has been retrofitted) Space requirement L x W x H 300 x 270 x 165 cm Weight 5100 kg good condition Ideal for cutting paper, cardboard, leather, cork, rubber or fabric reinforced rubber; used
used
used
Golden roaster 15kg Automatic manufactured in 2019 with less than 10 tons roasted. Including green coffee lift with scale and destoner All parameters are electronically adjustable on the monitor: - burner power - drum rotation speed - air flow - cooling power - cooling arm rotation speed - green coffee lift airflow - destoner airflow Recipes can be saved and reproduced automatically with the HMI Compatibility with Artisan and Cropster softwares Low consumption premix burner compatible with natural gas and LPG Single phase 220V 50-60Hz electricity Good quality components (Italian motors and gearbox, Beijer HMI and variable frequency drive, Combhex burner, Schneider and Siemens electrical parts, etc.) Help for the installation and training possible with extra cost depending on the location Inspection possible in production
new
Center width: 1000 mm Center height: 178 mm Orbit diameter over bed: Ø 356 mm Bed width: 190 mm Travel cross slide: 160 mm Travel upper carriage: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical counters: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Feed rates X: (40) 0.022 - 0.98 mm/rev Thread Metric: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 gg/inch Thread module: (32) 0.4 - 7,0 Diametrical thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner cone of the quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Characteristics: - Acceptance protocol according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision-be ...
used
Dear Sir or Madam, As good as new unused 1x concrete station with 4x 680KVA inverter 1xTransformer station with switchgear see photos for details
used
For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. ...
used
For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating ...
used
This HEINRICH SCHNEIDER PMS 400 Measuring machine was manufactured in the year 2013 in Germany.
new
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
table diameter: 900 mm table load: 1 t swivelling range: 0-135 Grad excentricity: 200 mm table turning speeds: 0,12 - 1,2 U/min Torque: 2000 N/m total power requirement: 0,75 kW dimensions of the machine ca.: 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust cons ...
new
Fully automatic powder filling system, triple auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pnematics, HBM weighing sensor (Germany). 2 packaging modes: High speed or High Accuracy. Specifications: stainless steel (SS304) version | filling range: 10-500g | accuracy: +/- 0.3-1% (high speed mode), +/-1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 40-130, heig ...
new
Fully automatic powder filling system, double auger-filler unit, straight transport of cans. Functions: automatic container feeding - precision positioning - container lifting - vibration - filling - weighing feedback - sorting - container outfeed. PLC control, precision servo system, dosing technique: screw and load cell feedback, removable glass cover. With Wi-Fi function, remote control and data download system. Easy cleaning, movable conveying platform and recycle funnel. SIEMENS PLC, SCHNEIDER Servo Motor, SCHNEIDER Inverter, AIRTAC pneumatics, HBM weighing sensor (Germany). 2 packaging modes: High Speed or High Accuracy | - Specifications: stainless steel (SS304) version | filling range: 10-5000g, accuracy: +/- 0.3-1% (high speed mode), +/- 1-2g (high accuracy mode) | suitable for: metal cans, glass bottles, plastic jar, cardboard cups, etc. | container dimensions: diameter 50-200, ...
used
Equipped with emergency stop, with accessories angle/protractor adjustment
used
A circular beam saw with approx. 3m roller conveyor to the left and right of the machine. Max. Cutting width: 840mm, max. cutting height: 280mm, speed: 1500rpm, saw diameter: 750mm, table dimensions: 1560mm/1560mm/940mm. Saw blade swivel 90° - 30°, extraction nozzle under/above the table: 160mm/100mm. Documentation available.
new
This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 45-90mm | bottle height: 75-240mm | sorting speed: max. 100 bottles/min | machine stops automatically when the bottles are jammed due to photocell | MITSUBISHI PLC, WEVIEW touchscreen, OPTEX photocell, SCHNEIDER frequency converter | Frame of stainless steel (SS304) | compressed air: 6-8bar | power: 220V, 2kW | machine dimensions: L2600xW1500xH1500mm. Optional: different unscramble trays for different bottle sizes. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...
new
Horizontally working filling and sealing machine forming, filling and sealing pouches, cam driven, intermittend in line working machine to fill (1 station) and handle pouches (flat, stand-up, with/without zipper), integration of various fillling systems possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). SIEMENS-PLC, -Touchscreen and -Frequency Converter, Sensors from OMRON, SMC and FESTO. Low volt eletrical parts from SCHNEIDER, OMRON temperature controller. FESTO pneumatic components. All product contacting parts made of stainless steel (SS304). - Specifications: pouch sizes: L(140-280)xW(85-210)mm | max. pouch deepth: 80mm | max. speed of the machine in neutral: 60 cycles/min | bag magazine | stainless steel | 380V, 7.0kW | 0.5m? air, 6bar | maschine dimensions (without filling system): L5927xW1317xH1942mm | weight net/gross: 1600/1800kg. Optional availa ...
new
Vertical filling machine, servo driven, for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: : up to 70 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80?C | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m?, 6bar | 220V, 4.8kW. OMRON encoder to control bag length, PANASONIC/Autonics print mark sensor, 7 touchscreen, OMRON PLC, AIRTAC pneumatic pars, OMRON PID temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm, 550kg Please no ...
used
Measuring area: 400x400x300mm, with high-resolution CCD camera, lens 1.5x field of view 4x3mm, CNC control Pantec WPC2030, industrial cabinet Rittal, dimensions: 850x750x1630mm, the measuring device can be upgraded with probe system Renishaw, measuring uncertainty E2=(2.0+L/300)µm, industrial computer with Windows 10 and measuring, control and evaluation software Saphir 5.8.
used
X-travel: 300mm, y-travel: 300mm, z-travel: 200mm, accuracy: E1 = (2.0 + L/300) μm mm, E2 = (3.0 + L/300) μm mm, E3 = (3.9 + L/300) μm mm, magnification: 1.5x, connected load: 1kW, in 2020 the machine has received a current version of the measuring software SaPHIR and Windows 10, after 2021 the machine has been used only rarely and has not undergone any maintenance/calibration, the Z-axis needs lubrication.
new
Vertical filling machine for liquids OR pastes into pillow-bags. Including liquid dosing device (for high OR low viscosity liquids/pastes). - Specifications: max. speed of the machine in neutral: 50 cycles/minute | suitable for volumes from 0-1000ml | filling temperature: up to 80?C | accuracy: +/- 1.0% (depending on product) | max. film width: 430mm | bag size: max. 340x210mm | 1.5m?, 6bar | 220V, 4.8kW. SCHNEIDER film pulling motor, PANASONIC/Autonics print mark sensor, 7 touchscreen, OMRON PLC, FESTO pneumatic parts (horizontal seal), other parts from AIRTAC, OMRON 4 way temperature control, electronic parts from SCHNEIDER / OMRON. Stainless steel version (SS304), including hot printer (2 lines, 10 characters). Dosing equipment: Pump with filling range of 100-1000ml, 40 liter hopper tank with double wall with warm water circulation. Machine dimensions and weight: L1080xW1300xH1400mm, ...
new
PRO-Version High Performance vertical packaging machine for tetraeder AND pillow bags INCLUDING 0.5L/10-head-scale. Innovative rotation sealing system for triangle bag. OMRON PLC, interactive 9.7-LCD touch panel display, SCHNEIDER and OMRON electronic components, AIRTAC pneumatics and OMRON PID temperature control, servomotor film pulling, pneumatic sealing unit. - Specifications: vertical and horizontal sealing width: 10mm | cutting way: searate cutting | stainless steel (SS304) | 10-head-0.5-liter-multiscale | weighing range: 5-500g | accurracy: 0.1-2g | max. speed of the machine in neutral: (only weigher, not complete system): 60 cycles/minute | 9.7 touchscreen | 100 program setting | bag sizes: L(50-230)xW(60-160)mm | max. speed of the machine in neutral: 50 cycles/minute | 220V/3.5kW | 6bar, 0.3m?/min | machine dimensions: L1100xW1400xH2220mm | weight: 650kg. Please note that our ne ...
new
PRO-Version High Performance vertical packaging machine for shaped bags (4-side-sealing). - OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. - Stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: L(30-110)xW(30-90) | max. speed of the machine in neutral: 30 cycles/minute | 220V/3.0kW | 6bar, 0,55m?/min | machine dimensions: L1464xW1233xH1377mm | weight. 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo ...
used
Cutting width min./max.: 25mm/1320mm, max. stack height: 140mm, pressure range: 30N-300N.
used
Size: 1150 mm Equipments: 3 spare knifes air table
new
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
PRO-Version High Performance vertical packaging machine for shaped bags (fin- OR 4-side-seal, to be decided in advance). OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. Stainless steel (SS304) version including hot printer (production date, etc.). Specifications: bag sizes: L(30-180)xW(30-60)mm | max. speed of the machine in neutral: 40 cycles/minute | 220V/2.5kW | 6bar, 0.55m?/min | machine dimensions: L1464xW1233xH1377mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Devia ...
new
PRO-Version High Performance vertical packaging machine with dual film supply (two film rolls) for round- or 4-side-sealiing of smaller bags. OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. No format tool needed to form the bags. Stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: L(20-100)xW(20-80)mm | max. speed of the machine in neutral: 50 cycles/minute | 220V/2.5kW | 6bar, 0.55m?/min | machine dimensions: L977xW1630xH1566mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short deli ...
new
PRO-Version High Performance vertical packaging machine with dual film supply (two film rolls) for round- or 4-side-sealiing of larger bags. - OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. No format tool needed to form the bags. Stainless steel (SS304) version including hot printer (production date, etc.). - Specifications: bag sizes: L(50-200)xW(50-175)mm | max. speed of the machine in neutral: 30 cycles/min | 220V/3.5kW | 6bar, 0.55m?/min | machine dimensions: L977xW1630xH1566mm | weight: 450kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short deliv ...
new
PRO-Version High Performance vertical packaging machine for high-speed packaging of middle sized bags of different types (optional/alternativ), pillow-, 3-side- and 4-side-seal-, gusset-, block bottom-, hole pouch-bag possible, zipper module for pillow bags is optionally available. OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. Stainless steel (SS304) version including hot printer (production date, etc.). Optional: Zipper module for pillow bags. - Specifications: bag sizes: L(180-500)xW(210-485)mm | max. speed of the machine in neutral: 60 cycles/minute | 220V/5.0kW, 6bar | 0.55m?/min | machine dimensions: L1800xW1750xH2500mm | weight: 780kg. That machine/system is available in different versions for different packaging sizes and with diffe ...
new
PRO-Version High Performance vertical packaging machine for high-speed packaging of middle sized bags of different types (optional/alternativ), pillow-, 3-side- and 4-side-seal-, gusset-, block bottom-, hole pouch-bag possible, zipper module for pillow bags is optionally available. OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. Stainless steel (SS304) version including hot printer (production date, etc.). Optional: Zipper module for pillow bags. - Specifications: bag sizes: L(160-450)xW(180-335)mm, max. speed of the machine in neutral: 80 cycles/minute | 220V/4.0kW | 6bar, 0,55m?/min | machine dimensions: L1515xW1660xH2240mm | weight: 600kg. That machine/system is available in different versions for different packaging sizes and with differ ...
new
PRO-Version High Performance vertical packaging machine for high-speed packaging of middle sized bags of different types (optional/alternativ), pillow-, 3-side- and 4-side-seal-, gusset-, block bottom-, hole pouch-bag possible, zipper module for pillow bags is optionally available. OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. Stainless steel (SS304) version including hot printer (production date, etc.). Optional: Zipper module for pillow bags. - Specifications: bag sizes: L(120-340)xW(150-210)mm | max. speed of the machine in neutral: 120 cycles/minute | 220V/3.5kW | 6bar, 0.55m?/min | machine dimensions: L1224xW1598xH1659mm | weight: 500kg. That machine/system is available in different versions for different packaging sizes and with diff ...
new
PRO-Version High Performance vertical packaging machine for high-speed packaging of middle sized bags of different types (optional/alternativ), pillow-, 3-side- and 4-side-seal-, gusset-, block bottom-, hole pouch-bag possible, zipper module for pillow bags is optionally available. OMRON PLC, interactive LCD touch panel display, automatic program-Set-Up, mark sensor, quick-change format unit, servomotor-sealing unit, SCHNEIDER servomotor for film transport with vacuum-belts. Stainless steel (SS304) version including hot printer (production date, etc.). Optional: Zipper module for pillow bags. - Specifications: bag sizes: L(50-300)xW(60-160)mm | max. speed of the machine in neutral: 80 cycles/minute | 220V/2.5kW | 6bar, 0.55m?/min | machine dimensions: L1215xW1470xH1330mm | weight: 400kg. That machine/system is available in different versions for different packaging sizes and with differe ...
new
New Generation Vertical Packaging Machine. Modular body construction, 7 colour touch screen and OMRON PLC with self-diagnose functions. Servo motor control on film pulling and and vertical sealing with double belts film pulling device. SCHNEIDER or OMRON electronic elements, Allen Bradley inverter motor for film unwinding system. Motorized tension control on film unwind system for smoother and faster film transportation. Suitable for laminated films, like BOPP/PE , etc. All product contacting parts in stainless steel (SS304). AIRTAC pneumatic components, OMRON PID temperature control. - Specifications: bag type: pillow bags with fin seal | max. bag size: L(80-350)xW(100-240)mm | max. film width: 500mm | max. speed of the machine in neutral: 60 cycles/minute | power 220V, single phase, 2.5kW | compressed air: 6bar, 0.55m?/min | machine dimensions: L1224xW1598xH1659mm | weight: 500kg. That ...
new
New Generation Vertical Packaging Machine. Modular body construction, 7 colour touch screen and OMRON PLC with self-diagnose functions. Servo motor control on film pulling and and vertical sealing with double belts film pulling device. SCHNEIDER or OMRON electronic elements, Allen Bradley inverter motor for film unwinding system. Motorized tension control on film unwind system for smoother and faster film transportation. Suitable for laminated films, like BOPP/PE , etc. All product contacting parts in stainless steel (SS304). AIRTAC pneumatic components, OMRON PID temperature control. - Specifications: bag type: pillow bags with fin seal | max. bag size: L(60-300)xW(80-165)mm | max. film width: 350mm | max. speed of the machine in neutral: 60 cycles/minute | power: 220V, single phase, 2.5kW | compressed air: 6bar, 0.55m?/min | machine dimensions: L1215xW1470xH1330mm | weight 400kg. That ...
new
Compact vertical packaging system for centre seal flat pouch. including dosing unit for granulates. Dosing unit can be customized, such as a counting unit for the dosing of tablets/tabs/capsules. PLC and 7-touchscreen, stainless steel version (SS304 - optional SS316). Self-diagnose functions, PID temperature controller, SCHNEIDER or OMRON electronic parts, fast and smooth film transportation by motorized feeding control, AIRTAC pneumatic components. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | pouch dimensions size: L(10-180)xW(40-140) mm | max. film width: 300 mm | film thickness: 40-90?m, 220V, 3.2kW | machine dimensions: L1500xW920xH1800 mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from ...
new
Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1%, max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging ...
new
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging ...
new
Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging s ...
new
Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging s ...
new
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1% | max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packagin ...
new
Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...
new
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ou ...
new
Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our ...
new
Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our ...
new
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...
new
Vertical packaging machine including dosing system(s) with 12 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 12x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-30)mm | power: 220V, 7.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1900xW1500xH1900mm | weight: 880kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...
new
Vertical packaging machine including dosing system(s) with 10 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 10x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-38)mm | power: 220V, 6.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1800xW1500xH1900mm | weight: 750kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that ...
new
Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-50)mm | power: 220V, 5.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1700xW1400XH1900mm | weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...
new
Vertical packaging machine including dosing system(s) with 6 manufacturing lanes to produce stick-packs with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 6x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-68)mm | power: 220V, 4.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1600xW1400xH1900mm | weight: 550kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that o ...
new
Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce stick-packs with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute | accuracy: +/-10% | suitable for all BOPP/PE and laminated films | bag sizes: L(50-350)xW(10-100)mm | power: 220V, 3.5kW | compressed air: 1.5m?/min, 6bar | machine dimensions: L1500xW1300xH1900mm | weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note tha ...