tankbau schneider used for sale

Transformer, transformer, with rectifier, power supply, power supply SCHNEIDER ELEKTROTECHNIK GmbH Type: DTB 360 PC - 891203 T5 0.36 kW Primary: 230 / 400 V 3AC 50 / 60 Hz Secondary: 24 V DC 15.0 A used, tested ! Dimensions: 185 x 140 x 130 mm

Electronic Module, Digital Edition SCHNEIDER, AEG AS-BDAP-216N TSX Compact Output: 2x8 24V DC 0.5 A unused ! Dimensions (package): 210 x 160 x 50 mm

Electronic Module, Positioning Module AEG, SCHNEIDER SAA103 Modicon 6058-042.248 263 New ! Dimensions (packaging): 290 x 200 x 50 mm

Electronic Module SCHNEIDER, AEG BIK116 SFB-Master 24V//2X5VDC New ! Dimensions (packaging): 290 x 200 x 50 mm

Electronic Module SCHNEIDER, AEG ADU116 16 Analog I U/I, 11 bit New ! Dimensions (packaging): 290 x 200 x 50 mm

Electronic Module SCHNEIDER, AEG BKF102 Modnet 1/IS Master 6065-042.703 580 New ! Dimensions (packaging): 290 x 200 x 50 mm

Power contactor SCHNEIDER ELECTRIC TeSys - 040416 ( TeSys-040416 ) CAD32BD 2F1042 Control voltage: 24 V DC New ! Dimensions: 115 x 95 x 50 mm

Power contactor SCHNEIDER ELECTRIC TeSys - 040142 CAD32BD 2F1217 Control voltage: 220 V 50 / 60 Hz New ! Dimensions: 115 x 95 x 50 mm

Pressure vessel, compressed air tank with bracket M. SCHNEIDER KOMPRESSORENWERK BLITZ Kompressoren Content: 50 litres Type mark: ZU24/13 Operating pressure: 11 atm ( approx. 11.8 bar ) spare part for construction machine PAUL ERNST FG3-1400 ! used, checked ! Dimensions: 970 x 350 x 440 mm

Pressure gauge valve with test connection AS SCHNEIDER PN250 DN4 G1/2 250 bar New ! Dimensions: 120 x 90 x 100 mm

Motor output: 4 kW Weight: 190 kg Receiver: 270 L Effective free air delivery: 520 L/min : 650 L/min Max. pressure: 10 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model AS with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic ...

Press force max.:: 1.000 kN heating plates:: 480 x 520 mm electrically heated:: °C piston stroke:: ca. 500 mm no. of stages:: 1 Condition: Used, overhauled Specification: 4-column vulcanising press 480 x 520 mm, used - closing force: 100 t - closing: from top to bottom - heating plates: 2 electric plates - New heating platens - Dimensions of heating plates: 480 x 520 mm - Distance between heating platens approx.: 500 mm - AC motor: 5,5 kW - New electric valves - New control cabinet with Siemens 7 touch panel - SPS system Siemens S7-1200 - Frequency converter make Schneider - New cabling - Light curtains in the front operating area Overhauled according to CE standard safety regulations Operating and maintenance instructions in German Warranty: 1 year The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Ref. -No.: 10294 Manufacturer: SCHNEIDER WERKZEUGMASCHINEN Year of construction: 1983 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 27.0175 Weight Of The Machine Ca.: 4 t Turret places: 8 Pcs Turning Diameter: 595 mm Turning Length: 3000 mm Bezel diameter (inside): 240 - 490 mm Further information: Tool turret, with 8 holders, with chip conveyor, approx. 300 mm wide, Belt filter system Mayfran, 2 bezels, 1 x for diam. up to 240 mm, 1 x for diam. until about 490 mm

Packaging machine for various areas in the GRANULES category: Food - snacks, peanuts, sweets, chips, dried fruits, cookies in general, etc. Automotive - small parts in general. Current setup for packages from 30g to 60g. Possibility of packing larger volumes with the acquisition of a hopper for setup. Productivity: 40 to 60 packs per minute. Description: Vertical packaging machine made of stainless steel and carbon steel parts with zinc plating. Front, side, bottom, upper protections and moving parts manufactured in compliance with NR-12. 10-head scale coupled to the machine, product supply conveyor, output conveyor, electrical panel in compliance with NR10. Configured with Schneider PLC and HMI Touch Screen with color screen where controls and functions, production and storage of data and recipes are managed. Equipment Voltage: 220v, Three Pha ...

Manufacturer: Purete, Type: PRT-R1119 1950 mm, Year: 2020 NEU, Control: Schneider oder Siemens, Program: Touchscreen, Work piece width min-max mm: 1950, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2-80, Operating side: links oder rechts, Working height: 980, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 0-20, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 0-20, Gummierte Auftragswalze(n): EPDM/SOFT/PU, kW - Leistung Auftragswalze: 1,5, Double rubber coating: möglich, Dosierwalze verchromt: yes, Dosierwalzenschwindigkeit m/min min-max: 0-20, kW - Leistung Dosierwalze: 1,5, rbakel: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Carriage: möglich, Roller heating: möglich, Einbaulänge Auftragsmaschine mm: 1000, Year :2020 NEU

Manufacturer: Purete, Type: PRT P3113, Year: 2020 neu, Control: Siemens oder Schneider, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Durchlassbreite min-max mm: 1.320, Operating side: rechts oder links, Working height: +/- 900, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5 - 20, Auftragswalzengeschwindigkeit m/min min-max: 5 - 20, Steuerung Nicht-Ex : yes, Attachment bracket roller: yes, everse drive: no, Separate Lackheizung: yes, Verstärkter Motor Transportband: 2 kW, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Einbaulänge Auftragsmaschine mm: 5.000, UV dryer: 2, Number of lamps: 2, kW power 1 lamp: 17, kW power all lamps: 34, Lampen schräg eingebaut: 0, Lamps straight installation: 1, Lamps from below: 0, Adjustable: yes, Leistung UV-Lampen W/cm: 120, Y ...

Manufacturer: Purete, Type: PRT P3106, Year: 2020 neu, Control: Siemens oder Schneider, Work piece width min-max mm: 620, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Durchlassbreite min-max mm: 620, Operating side: rechts oder links, Working height: +/- 900, Lackauftragseinheiten: 2, Vorschub Transport m/min min - max: 5 - 20, Auftragswalzengeschwindigkeit m/min min-max: 5 - 20, Steuerung Nicht-Ex : yes, Attachment bracket roller: yes, everse drive: no, Separate Lackheizung: yes, Verstärkter Motor Transportband: 2 kW, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Einbaulänge Auftragsmaschine mm: 5.000, UV dryer: 2, Number of lamps: 2, Lampen schräg eingebaut: 0, Lamps straight installation: 2, Lamps from below: 0, Adjustable: yes, Leistung UV-Lampen W/cm: 120, Year :2020 neu

Manufacturer: Purete 2 Walzenauftragsmaschine, Type: PRT-R2113B, Year: 2020 NEU, Control: Schneider oder Siemens, Program: Touchscreen, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Operating side: links oder rechts, Working height: 980, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 0-20, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5-20, kW - Leistung Auftragswalze: 1,5, Shore härten möglich: 5-65, Durchmesser Auftragswalze mm: 245, Double rubber coating: 1 Walze 50 shore/2 Walze gelasert, Stärke Gummierung min-max mm: 10-80, Dosierwalze verchromt: yes, Dosierwalzen Gleich und Gegenlauf: yes, Dosierwalzenschwindigkeit m/min min-max: 5-20, kW - Leistung Dosierwalze: 1,5, Durchmesser Dosierwalze mm: 175, Attachment bracket roller: yes, rbakel: yes, Separate Lackheizung: yes ...

Manufacturer: Telemecanique Schneider Steuerung, Type: TSX DMF 242A, Freitext 14: mit Spannungsversorgungsteil 24 Volt,

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Tool clamping system: inkl 2 Vorschübe, Year :1981

Manufacturer: Schneider Doppelspindelfräse, Type: SK-02, Year: 1981, Control: hand, Program: 2, Work piece width min-max mm: 3000/4000/6000/8000/10000, Min.-max. workpiece length in mm: 150, Vertikal spindle: 30, Spindle lift: no, Diameter of the spindle mm: 5,8, Spindle travel range total mm: no, Feeding speed: 1800 kg, Year :1981

diameter: 300 mm turnability of the table - man. & mec.: 360 ° reading precision - pitch: 1 sec lighting: Halogen enlargement: 10x/20x Measuring range: 250x125 mm cross-moving table: 0: 520x280 mm movement longitudinal: 250 mm Cross travel: 125 mm table load capacity: 20 kg dimensions of the machine ca.: 520x1000x1070 mm weight of the machine ca.: 300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Carpentry Universal Circular Saw Tailor Type 2406 Top Cutting height: approx. 250 mm Turntable rotatable 180 degrees Swivel 90 degrees- 30 degrees Cutting width adjustment 0-650 mm Clamping cylinder right Roller conveyor left 3000 mm Very good condition Functionally tested Shipping available at an additional cost

• For banding bottles or folding boxes • 90° infeed • Grouping by translator • Bottle infeed with 2 screws (adjustable to each other) for shaped bottles, grouped from single infeed lengthwise to 6x crosswise • With 2 format screws for shaped bottles 63.5 x 32.5 x 108 mm and 67 x 38.5 x 114 mm • Folding box infeed conveyor • Translator with one gripper each for bottle and one suction plate for folding boxes • for PE film • film width 30 - 450 mm • film thickness 0,025 - 0,1 mm • Roll diam. max. 320 mm • Output max. 50 cycles/min (packs/min), format/product-dependent • Format range product 30-100 x 30-100 x 60-250 mm [L x W x H] / pack 30-300 x 60-380 x 60-250 mm [L x W x H]. • Film splicer for automatic film change without machine stop • Machine control Siemens S7-300 • Control system drives Schneider PacDrive 3 • 400V/50Hz/22kW/31,4A

2 pcs ESKA TRPa Roller Paternoster for Floor Coverings and Fabric Products Manufacturer: ESKA Lager- und Verladesysteme Schneider & Kossatz GmbH Type: TRPa Year of construction: 1993 Quantity: 2 pcs. Capacity: 12 Total load: 3000 kg Height: 3.80 m Width: 5.75 m Depth: 1.00 m Suitable for rolls up to 5 m wide

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

1. VFK CARTRIDGE FILTERED POWDER COATING BOOTH (1-SIDED) Cartridge type powder coating booths are cost-effective solutions for companies that generally use single color powder coating or do not change the paint color much. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bot ...

1. CONTAINER TYPE LIQUID SPRAY BOOTH Spray booth type : Side draft, enclosed type Air speed : 0,50 m/sec (empty spray booth) EXTERNAL DIMENSIONS Length (mm) : 6.058 Width (mm) : 2.438 Height (mm) : 2.591 INTERNAL DIMENSIONS Length (mm) : 5.900 Width (mm) : 2.350 Height (mm) : 2.390 SPRAY BOOTH BODY Entry doors : 2-leaf hinged door 1x leaf G3 filter for air inlet 1x leaf service and emergency door with a panic bar Body material : Mild steel and rectangular iron tube metar structure Insulation : 50mm PIR polyurethane filled sandwich panels, B1 class flammability Window : 2 set of 600 x 600mm waterproof PVC window Container base : Aluminum sheet, non-slip Lighting system : 2 pcs, 2x36W enclosed type armatures, Ex-proof Zone 2 Lifting : Lifting eyes at the top corner areas, forklift fork openings at the base HEATING SYSTEM Source : Electricity He ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

2. VFDK-3 WALL TYPE CARTRIDGE FILTERED POWDER COATING BOOTH Wall-type powder coating booths are an economical manual powder coating booth solution for companies producing and powder coating small parts. These powder coating booths save space in the workshop and are a practical method of powder coating the work pieces to be painted. The wall-type coating booths can be combined with conveyors in transfer-type powder coating plants or have a simple conveyor line according to the project. WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists o ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Forming, filling and sealing machine for yoghurt cups Original ERCA packaging machine (FFS - forming, filling, sealing) type RK3. This machine was reconditioned in 1998 by the company CMA. Nominal output: 21,000 pots per hour. It is equipped with a decoration unit. A cutting tool for standard 63x63 mm cups with two formats X4 and X6. Heating is by radiation. The automaton is a series 7 from Schneider. Out of production : 2017 The machine is complete and in good condition.

Compressor control, compressor control, base load switchover -Compressor control: for circuits with several compressors -Transfer in current condition as seen -Dimensions: 220/320/H140 mm -Weight: 4 kg

Forklift cabin, full cabin, system cabin, complete cabin -unused driver cab for Clark electric forklifts or others -2x doors -Sliding windows in each of the doors -Data see photos -Also other cabins available

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, three-phase isolation transformer -Manufacturer: J Schneider, transformer type DLES 1.78-881129T4 -Power: 1540 VA -Technical data: see photo nameplate -Dimensions: 200/130/H230 mm -Weight: 14.3 kg.

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: GST Schneider, transformer type 13GST108 -Power: 0.384kW -Technical data: see photo identification plate -Motor protection switch: Schneider GV2-RT05 -Number: 2 x transformer available -Price per piece -Dimensions: 360/205/H115 mm -Weight: 12.2 kg/pc.

Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Manufacturer: Schneider-Jaquet, rotary valve -Inlet opening: Ø 147 mm -Outlet: 180 x 90 mm -Shaft: Ø 25 x 45 mm -Height shaft axis: 140 mm -Number: 3x rotary valve available -Price per piece -Dimensions: 380/250 / H430 mm -Weight: 38 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -Manufacturer: Schneider, control module -Control unit: LUCA 05BL -Base device: LUB12 -Number: 2 modules available -Price: per piece -Dimensions: 170/45/H125 mm -Weight: 0.9 kg

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -Manufacturer: Schneider, control module -Control unit: LUCA 12BL -Base device: LUB12 -Dimensions: 170/45/H125 mm -Weight: 0.9 kg

- Spare part: comes from a machining center BJM type ALBZ-145 -Servo motor: Manufacturer SchneiderType N065 / 2DC024V-038FCAN00 -Max. Speed: 107 rpm -Torque motor: 5.8 Nm -Number: 2x units available -Price: complete -Dimensions: piece 325/245 / H860 mm -Weight: 180 kg complete

Power supply, DIN rail -Manufacturer: Schneider, power supply from lathe DMT CD 480 / CD 320 -Type: NGDA 2415-920132T4 -Power: 360W -Input: 3 x 400V -Secondary: DC 24V -Quantity: 2x power supply available -Price per piece -Dimensions: 185/115/H140 mm -Weight: 6.2 kg/pc.

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCA 1XBL: control unit -LUB12: basic device -Price: per piece -Number: 3 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCA12 BL: control unit -LUB120: basic device -LU2MBOBL: reversible block -Price: per piece -Number: 8 pieces -Dimensions: 260/45/H185 mm -Weight: 1.6 kg/piece

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB05BL: control unit -LUB12: basic device -Price: per piece -Number: 16 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, control module, Standard control unit, direct starter, reversing block, reversible block, basic unit -LUCB12 BL: control unit -LUB12: basic device -Price: per piece -Number: 27 pieces -Dimensions: 155/45/H125 mm -Weight: 0.9 kg/piece

Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low voltage networks, circuit breakers for transformer, generator and system protection -Schneider Electric: Type NSX 160L LV429372 -Rotary drive with: extension -without: button -Terminal cover: 1 -Dimensions: 240/105/H575 mm -Weight: 2.9 kg