table cooler used for sale

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc 32iMB spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Manual Guide i The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table milling machine, table milling machine -Table milling machine: with rigid spindle -Speeds: rpm -Motor power: kW -Dimensions: 1000/1870/H1040 mm -Weight: 560 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 500 mm -Height: 120 mm -Groove: mm -Dimensions: 660/680/H120 mm -Weight: 129 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 310 mm -Height: 130 mm -Groove: mm -Dimensions: 410/380/H130 mm -Weight: 40 kg

cutting range: 90°: 90 mm cutting range: 45°: 75 mm Saw blade diameter: 315 mm Table dimensions: 800 x 500/400 mm Saw blade: 30 mm machine weight ab.: 45 kg dimensions: 850 x 600 x 430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mm table width: 420 mm table height: 300 mm side-clamping surface:: 300 mm groove width: 18 mm no. of flutes: 3 x 2 weight: 115 kg dimensions of the machine ca.: 600 x 420 x 300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

table length: 1105 mm table width: 220 mm Plate thickness: 30 mm weight: ca. 300 kg dimensions: 1105 x 220 x 150 mm T-slot - width: 16 mm number of T-slots: 1, Mitte total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mm table width: 3000 mm table load: 60 t total power requirement: 14.3 kW weight of the machine ca.: 48.5 t dimensions of the machine ca.: m Brand: FX Type: 83.300/400 Used machine Digital readout: Heidenhain ND 780 Table length: 4.000 mm Table width: 3.000 mm Table load: 60 T Movement: 2.000 mm Width T-slots: 58 mm (M30) mm Feeding: 4 - 1.500 mm/min Rapid traverse: 4.000 mm/min Power: 14,3 kW Machine weight: 48.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aluminum table, aluminum work table -made of aluminium -1x ground floor -Border -Feet: adjustable -Dimensions: 2020/900/H960 mm -Weight: 30 kg

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Printing plate deal Grafoteam TAT 48; good condition; we overhaul before delivery; Max. Plate format 1630x1300mm, min.510x400mm; Interface connection possible. Turn around table Grafoteam TAT 48; good condition; will be rebuilt before shipping; max.plate size 1630x1300mm, min.510x400mm; possible to connect with other machine.

refined air table, autom. Flap on both sides, format 720 x 870 mm ,

Rotary table, rotary indexing table, dividing head, dividing head -Round table: swiveling, with four-jaw chuck -Four-jaw chuck: Ø 190 mm -Bore center: Ø 54 mm -Base plate: Ø 205 mm -Dimensions: 420/410 / H395 mm -Weight: 70 kg

Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2580 mm -Maximum cutting thickness: Steel 2 mm / Aluminum 3 mm -Space requirement: 3020/2000/H1320 mm -Transport dimensions: 3020/2000/1320 mm -Weight: 3185 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Manufacturer: Schmid, rotary table with three-jaw chuck -Type: TWS200 -Mouth size: Ø 200 mm -Dimensions: 250/250/H365 mm -Weight: 52 kg

Drängeltisch, Storage table used Manufacturer: POLEYKETTING Year of construction: 2015 Total dimensions approx. 11 x 2.8 x 1.6 m The plant comes from a plant where canned food was produced. We also have the appropriate conveyor belts. Changes and errors in the technical data, information and prices as well as prior sale reserved

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table. with three-jaw chuck -Chuck size: Ø 210 mm -Spindle bore: Ø 64 mm -Center height: 150 mm -Dimension: 310/250/H260 mm -Weight: 47 kg

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary dividing table -Rotary table: Clamping surface: Ø 235 mm -Middle hole: Ø 25 mm -Groove width: 14 mm -Number: 2x round table available -Price per piece -Dimensions: 330/310/H110 mm -Weight: 28.8 kg

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Rotary table: with three-jaw chuck -Mouth size: Ø 160 mm -Spindle bore: Ø 42 mm -Dimensions: 510/320/H220 mm -Weight: 50.9 kg

Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm -Center bore: Ø 31 mm -Groove width: 14 mm -Dimensions: 700/510/H260 mm -Weight: 294 kg

Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: drilling machine table -Table surface: 480 x 330 mm -Bore: Ø 48 mm bolt circle Ø 108 x 13 mm -Groove width: 13 mm -Dimensions: see photo -Dimensions total: 540/550/H70 mm -Weight: 30 kg

Krumbein KSSM 1,4 D semi-automatic cutting machine; single blade cutting system; cutting takes place on two levels – the first level is cut transversely, the second – longitudinally; raising the tray from level to level is done manually; the distance between the knives can be adjusted; the knives are easy to remove; tray max. dimensions: length 800 mm, width 600 mm; product max. height 55 mm; power 400 V/3 Ph/ 50Hz, 1,6 A

Clamping table, clamping angle, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck -Round table with three-jaw chuck -Chuck size: Ø 315 mm -Spindle bore: Ø 103/28 mm -Dimensions: 460/270/H410 mm -Weight: 123 kg

turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table -Tactical table: pneumatic -Clamping surface: Ø 270 mm -Division: 24 -Dimensions: 500/130/H280 mm -Weight: 35.7 kg

CAKE CUTTING MACHINE KRUMBEIN KSSM V 0.1 D semi-automatic cutting machine; double blade cutting system; cutting takes place on two levels – the first level is cut transversely, the second – longitudinally; raising the tray from level to level is done manually; the distance between the knives can be adjusted; the knives are easy to remove; tray max. dimensions: length 800 mm, width 600 mm; product max. height 55 mm; power 400 V/3 Ph/ 50Hz, 1,8 A

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

Specifications: - max. Load capacity 750 kg - Face disc diameter 750 mm - Hollow continuous spindle 65 mm - Face disc motorically swivel 0 - 90 ° - Rotational movement electr. infinitely variable 0.05 - 2.0 m/min - Right - + Left - Run - E. – Foot switch + hand remote control - Welding current transmission approx. 500 A - Drive 400 V - Table height with horizontal position 1050 mm - 3. Cheek lining - Space requirement approx. W 1600 x H 1050 x D 1600 mm - Weight approx. 400 kg

Coming for sale: several used clamping angles/boring mill angles 1500 to 1800mm wide 2500mm high 1250mm deep Mass: 5.8t Load capacity 60t 6 pieces available tlw with staircase In addition, there are several smaller angles for sale: Clamping angle 1020 x 1025mm No. 81 Clamping angle 805 x 1000mm No. 85 Clamping angle 1660 x 1620mm No. 82 various box angles

Mechanized table. Sizes: 4500x1220x360mm. Screws for levelling. T slots of 60x35mm. Posibility of sell with a sliding radial drill.

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 45 mm -Dimensions: 220/180/H260 mm -Weight: 13.3 kg

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, magnetic holder, magnetic table -Manufacturer: Thyssen, magnetic table with pipe holder -Type: 105 662 -Pipe diameter: 42 mm -Dimensions: 150/130/H245 mm -Weight: 5.3 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

spindle moulder, spindle moulder, wood milling machine -Manufacturer: Martin, table milling machine type T 21 with table extension -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/9,000 rpm -Dimensions total: 1620/1060/H1120 mm -Total weight: 698 kg

Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm -Weight: 207 kg

table length: 620 mm table width: 170 mm table load: t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

table length: 900 mm table width: 600 mm table height: 700 mm groove width: mm : mm weight of the machine ca.: 90 Kg dimensions: 0,9 x 0,6 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: 20 mm, dimensions see photos -Degree display -Dimensions: 350/320/H45 mm -Weight: 20 kg

Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm -Height: 120 mm -Dimensions: 420/370/H120 mm -Weight: 50 kg

Cross table, cross-sliding table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel path: x 50 mm/y 65 mm -Weight: 60 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Height: 170 mm -Center bore: Ø 48 mm -Weight: 150 kg

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg