system nedermann used for sale

Manufacturer: MatriX Model: X3 Year of Manufacture: 2015 Condition : Excellent Accessories input Feeder output feeder Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Orbotech Model: Ultra Discovery VM Year of Manufacture: 2011 Ultra Discovery VM delivers simple, intelligent, and powerful AOI performance with 10 µm line/space inspection capabilities for FC-BGA, PBGA, CSP, and COF production. Delivering super clear images essential for capturing the finest defects, the system achieves outstanding AOI results with minimal effort or training, even on complicated panels. Most of the manufacturer’s valuable time on the system is spent inspecting panels. Logic false calls are virtually eliminated and overall false calls are minimized, saving precious verification time. Benefits - High throughput and superior detection with a minimal number of false calls - Especially designed for inspection of the finest lines down to 10 µm - Quick setup even for the most complicated jobs for higher productivity - Automation ready - Very high uptime  ...

Manufacturer: EVG Model: Lithoscale Year of Manufacture: 2023 Condition New-Never Used Technical configuration: • For maskless exposure of wafer sizes up to 300 mm • High precision stage including contactless wedge error compensation • Self calibration via integrated sensors • Extensibility up to two (2) exposure heads in total for highest throughput • Separate control unit • EVG CIM Framework software • Self diagnostics during machine start up, automatic initialization of all motors, position end switches, sensors and pneumatic • Inspection available on request • PC controlled operating environment • Solid state drive and hard drive for high availability and reliability • Supported layout format: GDSII Find more here - .ucymachines/ Contact us at - sales@ucymachines

Compressor system / compressed air system composed of: Compressor Type STA-010 Maximum pressure 10 bar Output 0.9m³ per min incl. pressure tank 350l (14BAR) with filter

Manufacturer: Schmid Model: 25 Year of Manufacture: 2011 Description: Pass Through spray cleaner Accessories :Switch Cabinet. Media Cabinet Condition : Very Good Voltage: 400 V Frequency: 50 Hz Exterior Dimensions - Width 196.850 in (500.0 cm) - Depth 59.055 in (150.0 cm) - Height 250.000 in (635.0 cm) Find more here - .ucymachines/ Contact us at - sales@ucymachines

ID3650 Wagner NFK2000 year/Baujahr 1998 Dust extraction system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags Dedusting system, chain filter, with rotary valve and spray water extinguishing system, raw gas volume 43,000 cbm/h, filter area 373 sqm, 250 filter bags

An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible.

Pero Washing Machine 2600/016GR.2W-4667

Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible.

FOBA Vario RPD50 VS1109/048 - Windows XP English / German - 1.4GHz 512MB RAM - Fobagraf 441-01 - EMC / IMP camera - New IMP LED's - Radiator type P313 - 2013 – new filters - HF 40W - PK used, year of construction 2011, 1.3MB, 10.5 W under the lens - 420 lens, deflection unit Raylase SS 10 - Z - 170mm and X axis 300mm - Turntables in pendulum mode, - Start via footswitch, possible via light curtain - Internal / FOBA PLC - Bulkhead = max. component height 150mm - Completely cleaned / serviced 19% VAT is shown, EXW, Commissioning, instruction, training possible on request

Properties: Volume 300 L Height 900 mm Width 800 mm Vertical design Material GRP/ Plastic

Properties: Volume 300 L Height 900 mm Width 800 mm Vertical design Material GRP/ Plastic

Labeling system PRINTWOLF from 2013 for glasses and small bottles (approx. 60ml - 250ml),, very good condition, 2 Collamat label dispensers for self-adhesive labels, Labeling of the front label (on the glass) also possible in two parts, labeling of the lid, PLC control (Siemens),, high-quality sensors, also detect black and transparent labels, Vacuum rewind belt with 2 different feed screws., Angular glasses (hexagon/octagon) can also be labeled, Labeling speed: 18 meters / min (about 80 glasses), Labeling accuracy: +/- 1mm, Supply: 400 V 50 Hz power approx. 1.5 KVA, Aluminum - stainless steel frame., The belt length of the machine is 3.97m., Separate control cabinet, Matching, additional packaging table with conveyor belt, The work table has dimensions of 1.20 x 2.32 x 0.94 m W/L/H (table top), The total length with tape overhangs is 3.20m, power: Labeling speed: 18 meters / min (about  ...

Offer 25468 Sheet metal – roll forming line for shelves Specifications: - Shelf width approx. 250 mm - Material thickness 1.25 mm - Roll forming unit with 16 roll stations - hydr. Punching unit - Straightening unit make DREHER -Mot. Reel CAMU Load capacity approx. 1.5 T -Control panel - Space requirement / footprint 14 x 1.5 m - Weight approx. 10 T

6600 mm Rexroth conveyor line Conveyor line with its own drive for the transport of workpiece carriers in the longitudinal direction or for the transverse transport of the workpiece carrier between parallel conveyor lines in conjunction with a lifting transverse unit for ejection from a longitudinal to a transverse section and vice versa. Manufacturer: Bosch Rexroth Voltage: 3 x 400 V 50 Hz (16 A) Control voltage: 24 VDC Pumped medium: Timing belt Belt section: 6600 x 500 mm Lifting cross unit: 500 x 430 mm Belt height: 990 mm More items - new and used - can be found in our shop! International shipping costs on request!

Key data: 48 KW, 60 kVA, 400 V

Execution: Category: Emergency Power Generator Stationary Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine type: F 6 L 912 Motor power: 56 KW Cooling: Air-cooled Starting: Electric 12 V DC Speed: 1500 rpm Fuel: Low sulphur fuel oil Emission standard: TA-Luft Technical data generator: Generator manufacturer: Stamford Generator Type: S1L2-Y Generator power: 60 kVA Generator current: 86.40 amps Short-circuit current: 259.2 amps Overload: 95.04 amps Voltage 400 / 231 Volt Voltage regulator: yes electronic AVR Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery set up Base frame tank with drip pan Capacity / litre: 1 ...

Used Trane FVCP06CWQ5R2WWBVWW fancoil unit on Glycol. The unit can be used for cooling and heating. Dimensions: 1410x240x560 mm (LxWxH). The fancoil unit has a cooling capacity of 4,8 kW at the following temperatures - air inlet temperature: 26°C & water inlet/outlet temperature: +7°C/+12°C. Trane FVC units are often used in: Apartments / Residential buildings Hotel rooms Offices / small workplaces Bedrooms / living rooms

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

A self-built powder welding machine with a power source Kennametal and an MTA cooler for applying Stellite to valves is available. 1) Cooler MTA TAE EVO 10M, year of construction: 2013, cooling capacity: approx. 3kW, refrigerant: R407, filling quantity: 0.8kg, max. operating pressure: 28bar, flow rate: approx. 0.59m³/h. Machine dimensions X/Y/Z: approx. 600mm/600mm/800mm, weight: approx. 100kg. 2) Power source Kennametal Stellite PTA Junior Star, year of construction: 2013, open circuit voltage: 75V, welding current range: 10A/10V-250A/38V, protection class I. Documentation available. An on-site inspection is possible.

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection poss ...

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible.

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-S7+299, Vogel 30L, 0.5L/min., max. 27bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been tak ...

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-SZ, Vogel 30L, 0.5L/min., max. 20bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been taken i ...

A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible.

new motherboard with Part Number 503-00286A or Visible Number 637-00173A-A

Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm

CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel

Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment.

A Dr. Fritsch segment soldering machine for the automatic soldering of segments (typically diamond segments) onto carrier tools is available. An on-site inspection is possible.

CNC Laser Cutting Machine Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of Make: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 KW Processing area: 3,000 x 1,500 mm Sheet thickness steel (max.): 15 mm Sheet thickness stainless steel (max.): 8 mm Sheet thickness aluminium (max.): 8 mm Working Temperature: + 10 to + 30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet left Æ 250 mm Laser Source IPG Ytterbium Laser System YLS 2.5 kW Laser Chiller LC 170.01-A.3.5 Voltage: 400V/3P/50Hz Filter system TEKA 4H 5.5 kW External dimensions of the entire system: approx. 10,400 mm x 3,610 mm

Lister KL5L air-cooled chiller Manufacturer: Lister Type KL 5 L kW: 3.25 Voltage: 400 V Frequency: 50 Hz 6.3 Amps Refrigerant: R 134a Max. operating pressure: 13 bar Dimensions: (WxDxH) 940 x 560 x 1100 mm More items - new and used - can be found in our shop! International shipping costs on request!

Dimensions (L/W/H): 1920x3520x6300 mm Weight: 2500 kg Total power requirement: bis max. 22 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel clad TOUCH control composed of: Head machine type K5/4 Weight range up to 110gr Proofer Premium K with lateral pretzel discharge with cutting station with 2 long-rolling stations with sheet metal deposition - Bakery condition/not cleaned

Dimensions (L/W/H): 1170x560x570 mm Weight: 55 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible.

Dimensions (L/W/H): 600x700x1050 mm Weight: 120 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4590x1100x2500 mm Weight: 1000 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 670x770x1203 mm Weight: 142 kg Total power requirement: 1,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x2000x2000 mm Weight: 190 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 750x1400x2000 mm Weight: 137 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5470x1100x2500 mm Weight: 1100 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 900x560x570 mm Weight: 50 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3480x1100x2500 mm Weight: 900 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4100x1200x4920 mm Filter capacity: 53,08 m² Number of filters: 96 St. : 400 mm Weight: 1230 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1685x765x650 mm Weight: 91 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 355 mm : 12500 m³/h Motor output: 15 kW : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3460x1000x2400 mm Number of filters: 73 St. Number of dust containers: 4 St. Weight: 410 kg : 355 mm : 520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 355 mm : 10000 m³/h Motor output: 11 kW : 4 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5000 m³/h power capacity: 5,5 kW Speed: 3000 U/min. : 280 mm Dimensions (L/W/H): 2460x1250x1600 mm Weight: 380 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.