system nedermann used for sale

Entry and pull-out system for scanners; movable units; complete with drives and pneumatics; Holding role is missing; Foerderhoehe 1.550 mm; servo motor for adjustable slides infeed system for scanner of boards; sidevise moveable; incl. motors and pneumatic; hold down roller is missing; transport level 1.550 mm; servodrive for sidevise moving

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

Machine type TIG inverter welding system gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 4 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped Warranty 6 months from the date of delivery Original price 1.550,00 € + VAT Price kpl. from ...

CIP SYSTEM 3 X 300 L Tanks HEAT EXCHANGER STEAM VALVES CONTROL PANEL CONDITION : NEVER USED SKID MOUNTED AVAILABLE IMMEDIATELY

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

3-tier Preparation Conveyor Suitable for a variety of applications: vegetables, poultry or meat. 3-tier system

ARRIVAL /LIVE BIRD HANG CONVEYOR KILLING& DEFEATHERING OH CONVEYOR AT 6 INCH CENTRES DRIVE UNTIS TENSIONERS CORNER WHEELS SHACKLES ELECTRIC STUNNER AUTO KILLER BLOOD TROUGH SCALDER 2X AIR AGITATED(2 STAGE SCALDING) LOW SCALD TEMPERATURE CONTROLLER HOT WATER BOILER. 3 BANK PLUCKER 2 BANK PLUCKER HEAD PULLER LEGCUTTER FOOT UNLOADER SHACKLE WASHER EVISCERATION OVERHEAD CONVEYOR AT 6 INCH DRIVE UNITS TENSIONER CORNERWHEELS SHACKLES VENTCUTTER 16 UNIT OPENER 16 UNIT EVISCERATOR 20 UNITS CROPPER 16 UNITS NECK BREAKER 16 UNITS INSIDE /OUTSIDE WASHER 12 UNITS FINAL INSPECTION MACHINE 12 UNITS BIRD UNLOADER. CHILLER CHILLER 9 METER AUGER COUNETFLOW ICE MACHINE 10 TONNE COMPRESSORS WEIGHLINE (CHICKWAY) AT 8 INCH DROP OFFS COOLLECTION BINS CONVEYORS CONTROL CABINET COMPUTER AUTOMATIC CUT UP SYSTEM COMPACT. CARCASS CUTTER  ...

Number of levels: 50, including 6 boxes, with documentation, an inspection is possible.

Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,486 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...

Technical data baler: Manufacturer BOA Recycling Systems B.V. Type Impress D225-165-D-5V/5H-1.6 Year of manufacture 2022 Operating hours 1,568 hours, as of June 2023 Pressing force main press 2,211 kN or 211 t Specific pressing force 17.5 kg/cm² Working pressure 280 bar Press stroke main hydraulic cylinder 2,900 mm Average cycle time 23 seconds Dimensions of feed chute 1,620 x 972 mm Volume of press chamber 4.4 m³ Bale dimensions 1,100 x 1,200 mm, length variable Drive power 3 x 45 kW Total connected load 250 kW, 500 A Tying system 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates with a bulk density of 30 kg/cbm up to 20 t/hour Bulk density of 60 kg/cbm up to 33 t/hour Bulk density of 100 kg/cbm up to 46 t/hour Bulk density from 150 kg/cbm up to 56 t/hour Bulk weight from 200 kg/cbm up to 69 t/hour Bale weights up to 1300 kg, depending on material Hydraulic oil tank ...

Bluhm Systems Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system, with its small dimensions of 188 x 80 x 98 mm, can be easily installed in or on production equipment. The print head reaches top speeds of more than 180 m/min and has an IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is provided by an i-Logic button. In addition, maintenance statuses can be shown on the display. With dimensions of 188 x 80 x 98 mm, the Integra One is particularly compact and has been specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard cartridge monitoring identifies the curr ...

Manufacturer: Sonic Air Systems Year: 2007 Type: Sonic 70 Power: 5.5 kW Dimensions: - Total height: 2300 mm - Width: 1000 mm - Length: 1000 mm - Bottle inlet height: 1530 mm The machine has been renovated and is ready for installation.

A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute. Technical data baler: Manufacturer BOA Type Impress D130.110.B.5-(5R).1.6 Year of construction 2009 Press power main press 127 tons Specific press capacity 10,7 kg/cm² Working pressure 280 bar Feed channel 1.620 x 972 mm (l x w) Press volume / cycle 4,1 cbm Volume throughput without load up to 865 cbm/hour Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving power 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm up to 17 to/h bulk weight of 50 kg/cbm up to 29 to/h bulk weight of 100 kg/cbm up to 37 to/h bulk weight of 150 kg/cbm up to 51 to/h Bale weight up to 1.200 kg Volume hydraulic oil ...

Ishida checkweigher with Lock Inspection Systems metal detector and 2 rejecters, model: DACS-W-012-SB/WP-I-N(CTS), serial number: 556343, year of construction: 09/2006, 240 V, 1 Ph, 50 Hz, 2 A, serial number metal detector: 29583, year of construction: September 2006, 230 V 1 Ph, 50 Hz, 0.25 A, plastic belt, belt width: 220 mm, clearance: 265 mm x 125 mm, total dimensions: 1800 mm x 1020 mm x 1540 mm.

Pallet with parts for organ vacuum system, dimensions pallet: 1700 mm x 1350 mm x 1200 mm.

17 Cooling system for cooling birds by using chilled water, dimensions: (17x) 3020 mm x 1000 mm x 530 mm.

Warehouse inlet line, System Logistics brand.

Warehouse outbound line, System Logistics brand.

Warehouse outbound line, System Logistics brand.

Reverse osmose filter system, diameter pipe: 170 mm, total dimensions: 3050 mm x 1200 mm x 1750 mm.

Automatic line for the production of sandwich panels of the LL-2000 brand of the P-SYSTEMS plant (Czech Republic), 2003. The line is designed for the production of wall and roof sandwich panels with mineral wool and polystyrene foam insulation. The manufacturing process is automatic. Requirements for raw materials for sandwich panel sheathing - thickness 0.4 ... 0.6 mm .: - sheet steel galvanized The production process is carried out automatically (with the exception of the laying of insulation and the preparatory process). Completeness of the line, technical characteristics: - Unwinding device - 2 pcs. - Profiling area. - Table for supplying insulation. - Glue application and distribution device. - Steel strip heating section. - Pressing device. - Transverse movable cutting device. - Line control system. Line productivity per shift (8 hours) 1000 sq.m. The maximum spe ...

With the Easy Clean System you can clean components of 3D Systems MultiJet printers such as the ProJet 2500Plus very easily and quickly.

With the Easy Clean System you can clean components of 3D Systems MultiJet printers such as the ProJet 2500Plus very easily and quickly.

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

Kiener Skinetta Pac-Systeme ASK-300 bundler and stretch wrapper, output up to 32 packs per minute. Maximum reel width 300mm. Maximum final pack dimensions 380mm (W) x 360mm (L) x 290mm (H). Includes stacking unit.

; ready

Absolutely new short-length forklift, type Opti-Stack, complete with control and control panel. Sweepers and various conveyors can be offered as an option. Almost new short length stacking units SystemTM type Optistack 3.000 Series. Including control. Optional we can deliver together with several belt conveyor.

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Cross-extractor via conveyor belt. Max. workpiece width 150mm. Absolutely as good as new Sweeper to feed short length timber crosswise. Max size 150mm. New condition.

Belt-foerderer with 3 belt webs and 5 pneumatic hooks and 1 pneumatic sorting flap; Length 5,600 mm; 1,800 mm; 750 mm; 1.1 kW belt conveyor with 3 belts and 5 pneumatic driven hooks and 1 pneumatics travers; length 5,600 mm; 1,800 mm; 750 mm; 1.1 kW

Foerderband with 5 piece low pressure rollers; Length 1.550 mm; belt width 240 mm; transport height 920 mm; without drive motor belt conveyor incl. 5 pcs. hold down rollers; length 1.550 mm; width 240 mm; transportation level 920 mm; drivemotor is missing

Very stable paddle puller (2 piece) for sawn timber with integrated return alignment belt; max. wooden lime 3,000 mm; Foerderhoehe 1,120 mm; complete with substructure heavy duty sweeper (2 pcs.) for timber incl. even ending belt conveyor; max. length 3,000 mm; transportation level 1,120 mm; incl. steel construction

Combined belt and chain transport with 3 or 4 straengens; Length belt approx. 1,500 mm with 3 pcs pneumatic hooks; Laenge chain path approx. 1,800 mm with 5 pcs pneumatic hooks combination of belt and chain conveyor with 3-4 chains; length of belt conveyor about 1,500 mm incl. 3 pcs. pneumatic hooks; length of chain conveyor about 1,800 mm with 5 pcs. pneumatic hooks

Chain foerderer with 3 chain straengen; Length 6.100 mm; width 780 mm; Foerderhoehe approx. 1,600 mm; with 3 stubs pneumatic hook chain conveyor with 3 chains; length 6,100 mm; width 780 mm; transportation level 1,600 mm; incl. 3 pcs. pneumatic hooks

Belt-foerderer with 4 belt webs and swivel displacement; Length 750 mm; 1,750 mm; 950 mm; 3,400 mm incl. 4 pneumatic hooks; Drive 1.1 kW belt conveyor with 4 sections and pneumatic movible traverse; length 750 mm; 1,750 mm; 950 mm; 3,400 mm incl. 4 pcs. pneumatic hooks; 1.1 kW

SystemTM short length stacking machines for timber length 400 mm up to max. 1.200 mm. Almost new machines. There are also sweepere units available for the stacking units.

Cortina DS 3100, working range: 8,000 x 2,000 mm, year of construction Dec. 2004 CNC-controlled cutting machine with robust bridge suspension, form-fitting longitudinal drives and precisely machined guide profiles, Connection voltage: 400 V 50 Hz, TN-S mains (A/PE/N) track width: 3100 mm working width: 2000 mm dead length: 1500 mm Total width: 3525 mm Operating side: left power supply: right fuel gas: propane incl.: OmniCom Explorer C drive 15 m/min DC dual-sided Longitudinal drive on rail feet machine cutting torch ALFA (with internal ignition) OmniFlow automotive supply (gas quantity control up to 6 burners) OmniFlow Control torch suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile first height detection interlock for a maximum of 2 systems HT 4400 HySpeed fine beam plasma cutting system cutting up to 50mm energy supply via energy chain (autogen/plasma) cu ...

Cortina DS 3100, working range: 8,000 x 2,000 mm, built in Dec. 2004 CNC controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 V 50 Hz, TN-S Network (§ / PE/N) Track width: 3100 mm Working width: 2000 mm Dead length: 1500 mm Total width: 3525 mm Operating side: left Power supply: right Fuel: Propane Including: OmniCom Explorer C drive 15 m / min DC Carrier for double-sided longitudinal drive on Schienenfüßen Machine cutting torch ALFA (with internal ignition) OmniFlow autogen supply (gas volume control up to 6 burner) OmniFlow control Burner suspension OmniLift 200 SensoMat ALFA SensoMat ARC/SR Plasma SetControl, tactile initial height determination Interlock for maximum of 2 plants HT 4400 HySpeed fine beam plasma cutting system Cutting up to 50mm power supply thro ...

Track width: 2100 mm working width: 1500 mm working length: 3000 mm width: 2650 mm CNC Control Omnicom Explorer Color LCD Display 1 torch Plasma suspension pneumatically moving roller sampling Option : Umruestung to arc removal possible Plasma Burner head Percut 100 incl. Lantek Software Expert 2000 extraction system as good as new . The system is ready for pre-use in our factory hall; ready for immediate use

We can offer 2 units of this paddle puller from a plant closure out. Including rear set conveyor belt and steel base support height approx. 1.000 mm

various small paddle puller for waste sorting of cutting goods by a conveyor belt. Driven by an electric motor. Pumping height approx. 1.000 mm, adjustable. Very powerful, up to 80 cycles/min

Tractor drive from 50KW, optionally with continuous or Variogetriebe, ca 500 PCs around the world,... Perfect compost quality in economic operation, over 20 years experience! For green waste, organic waste, contaminated soil, sewage sludge utilization, drying of biomass...

Depositor Serial: D150P511007 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame,

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

3D-SYSTEMS ProJet 660 Pro 3D Printer Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. This means that even large models can be produced without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one printing process. 3D color printers with tremendous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. As a result, even with complex and detailed printouts, these 3D printers do not require dedicated support structures. The non-solidified powder supports the components during printing and is then recycled semi-automatically. Applications Communication of form and design, installation analyses, first fun ...

OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians  ...

Transport and pressure unit for oval pipes 3000 mm long at 80-1100 mm diameter (without lifting and traversing unit) - The device has a hydraulic supply built into the head (visible also in the picture). - Electrical supply with attached control box direct connection to 380 V. - Hand-held buttons for the pressing functions. W8bik - The unit was constructed according to CAD drawing set with principle drawing. - Required lifting unit max. 1 to. Chain hoist.