system nedermann used for sale

Composite plant VPM355-4830 / 3604959 with condenser for freezing with 3 compressors: 4TCS-8.2Y-40P Compressors each have 8hp Built: 2006

Machine Type: TIG Inverter Welding Machine Water-cooled DC and AC system Make Lorch Type V 30 AC/DC Connection voltage 3 x 400 Volt Adjustment range 3 – 300 amps Duty cycle 60% ED at 300 amps 100% ED at 250 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 8 mm Aluminium = 5 mm Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Fuse protection 32 amps Dimensions L x W x H 1,130 x 450 x 815 mm Weight 108 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG torch Binzel WHW 18 SC, 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 1 ...

Machine Type: TIG Inverter Welding Machine gas-cooled DC and AC system Brand: Merkle Type LogiTIG 240 AC/DC Connection voltage 1 x 230 Volt Setting range 3 – 240 amps Duty cycle 35% ED at 240 amps 60% ED at 160 amps 100% ED at 130 amps Infinitely variable current adjustment max. weldable material thickness steel / stainless steel = 6 mm Aluminium = 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse protection 32 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 25 kg Age 36 months Condition workshop-tested like new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece of ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 24 Months ...

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YO ...

Adsorption system (absorbing plant, absorption system) used for air purification, activated carbon filter and solvent recovery Air filter, odour filter AMEG Type: DAP 4 exSo "Optima" Dimensions approx.: 3400 x 1400 x 2700 mm Control cabinet: 800 x 600 x 1900 mm The plant cleans air from vapours of organic solvents by adsorption mittles activated carbon filter. A more detailed description of the process can be found in the pictures.

This is a drying and disinfection system for boots and shoes from the manufacturer PHT type HYGIfeet M5. The Hygifeet drying and disinfection system is the innovation for all social spaces. The system stores shoes and boots after use and disinfects and dries them at the same time. Disinfection is carried out safely by ozone and therefore does not consume any chemicals. The simultaneous drying takes place via warm air, which ensures a short drying time. The ozone-warm air mixture is only released when the boots are attached to the valve heads. In addition, the valve heads are ergonomically shaped for optimal air circulation. Warm, dry boots increase the well-being of your employees and prevent diseases through disinfection. The device has been tested in our in-house specialist workshop and is fully functional. Bof7x8gtdey The price quoted is net plus 19% VAT. OUR USED EQUIPMENT S ...

The used coolant cleaning system based on centrifuge MZF T22 Turbo-Separator AG, is connected to a tool grinding machine (Anca, Rollomatic, Walter, Schneeberger, etc.) and supplies the grinding machine with clean emulsion or oil. The pure oil is pumped directly to the grinding machine by pumps placed on the coolant cleaning system. Depending on the process, a system can also supply several machine tools with clean coolant. Advantages of this system: 1. Use with oil or emulsion no problem 2. Filtration without consumables with the centrifuge, 3. Use with tungsten carbide, ceramic or HSS no problem. 4. The sludge comes out of the centrifuge dry, with minimal residual moisture. Supply pump capacity 1 (for process supply): up to 100 litres/min. at 5-7 bar Supply pump 2 (for spindle cooling) 20 litres/min. at 5 bar The contaminated oil runs back from the machine into the filtra ...

Composite plant VPP350-4860 / 3604957 with condenser with 3 compressors: 4PCS-15.2Y-40P Compressors each have 15hp Built: 2006

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

Oil-water separation system / separator, for compressors KT06 000 01 Replacement filter: XV KT06 AF2

Haas TRO 140G Price: 110,000 € Machine No: 18767 Built: Number of baking tongs 140 , 2 baking places per pliers Upper engraving without Underengraving 5 x 5 mm Rand yes Tool 22°30' Power consumption: approx. 2.5 kw/h Gas consumption: approx. 24 m3/h Location: Germany The machine is used for the production of sweet, twisted squirrels with standard industrial size and flattop. Winders, conveyor belt, ready-to-wearer, metal detector and stacking table are included. The machine is in a well-maintained condition. The machine is currently stored. Haas, GAM, Steinhoff, Walter, Industry

Machine complete with PC, RIP, etc.

Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...

Supply air heating system, NW250, 400V, 9KW, KMS, mint condition -80% Special price ! The current new price of a similar product is more than € 8,000 excluding VAT. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Top condition like a demonstration unit! The part was removed from a new machine that has demonstrably only run for approx. 100 operating hours. Technical data: - Supply air heater 9 KW - Heating cartridge with heating cross 400V 3x3000W - Incl. pipework, complete design in stainless steel + pipe insulation - Incl. corrugated flex sleeves - Stainless steel intermediate non-return valve AWS ZRK-VA-VA-200-F - Assembled incl. stainless steel mounting bracket - Price is without HEPA filter and Ex centrifugal fan, we are happy to offer - Parts list and drawing from KMS - Inlet side NW250 - Outlet side NW250 reduce ...

Compresor system Prematic 388/150 PAKO vollaut. L x W x H: 1.1 x 0.7 x 1.2 m Weight approx. 120 kg Built in 2016 Refrigeration dryer Prematic IDFA The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3500 mm - Hook height approx. 2800 mm - Crane track length approx. 5000 mm - Height approx. 3900 mm - UK crane carrier approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3900 mm - 2 longitudinal suspension carriers approx. 5000 mm - Cross suspension carriers approx. 3500 mm - Weight of the plant approx. 1000 kg

working length: 2500 mm Working width: 1650 mm Working height: 850 - 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: - Load capacity E. chain hoist 250 kg - Lifting speed approx. m/min - Operation of the chain hoist via hand remote scanner - Man. Process hoist / transverse path + longitudinal path - Track gauge variable to approx. 3000 mm - Hook height approx. 2200 mm - Crane track length approx. 4000 mm - Height approx. 3500 mm - UK crane carrier approx. 2700 mm - UK - longitudinal rail approx. 3000 mm - 4 pieces of steel supports made of recheck tube 150 x 100 mm H 3500 mm - 2 longitudinal suspension carriers approx. 4250 mm - Cross suspension carriers approx. 3000 mm - Weight of the plant approx. 1000 kg

Make: HEBER Type: RLG-04/355 Year: 2001 Power: 8400 m3/h Current consumption: 8.4A/400V, 4.8A/690V Switch box with control via frequency inverter Price on request Contact details can be found at frigocom.at/kontakt/

working length: , mm Working width: , mm Working height: , mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mathis THN 10988 Laboratory Thermosal Plant Use This foulard-dryer combination has proven itself excellently in practice. It is used in this way for a wide variety of hot air treatment processes such as drying, fixing, condensing, thermo-isolating, etc This system is used wherever a certain sample size is already required, for example to produce sample collections or the like. Dryer THA If the foulard and dryer are to be used separately in addition to continuous operation, the THA type dryer should be chosen. Attached to this device are a unwinding unit at the dryer entrance and a pull-out unit at its exit. This element determines the speed of goods in individual operations. This offers the advantage of using the foulard and dryer independently and at the same time. For drying, fixing, condensing, etc., the goods are then put on the dryer. If all the previously listed ap ...

Bito two-storey mezzanine system Multi-storey complex of Bito For large assortments and high picking performance Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage space. At the same time, the height of the warehouse is used optimally By integrating shelving racks, direct access to all general cargo is possible, even if your range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving on lower floors, slow-moving on top), which significantly increases the efficiency and speed of your warehouse management Make: BITO Type: C-hole profile Year of Make: 2020 640.5 m² (per floor: 213.5 m²) Floor + 2 storage levels (ground floor/1st floor/2nd floor) Footprint: 7,300 x 28,250 mm 38 mm chipboard covering: white/grey Load capacity: 350 kg/m² Shelf heig ...

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

Bito two-storey mezzanine system Multi-storey complex of Bito For large assortments and high picking performance Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage space. At the same time, the height of the warehouse is used optimally By integrating shelving racks, direct access to all general cargo is possible, even if your range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving on lower floors, slow-moving on top), which significantly increases the efficiency and speed of your warehouse management Make: BITO Type: C-hole profile Year of Make: 2020 636 m² (per floor: 212 m²) Floor + 2 storage levels (ground floor/1st floor/2nd floor) Footprint: 7,400 x 28,650 mm 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Shelf height:  ...

Bito two-storey mezzanine system Multi-storey complex of Bito For large assortments and high picking performance Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage space. At the same time, the height of the warehouse is used optimally By integrating shelving racks, direct access to all general cargo is possible, even if your range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving on lower floors, slow-moving on top), which significantly increases the efficiency and speed of your warehouse management Make: BITO Type: C-hole profile Year of manufacture: 2018 633 m² (per floor: 211 m²) Floor + 2 storage levels (ground floor/1st floor/2nd floor) Footprint: 7,400 x 28,500 mm 38 mm chipboard covering: white/grey Load capacity: 500 kg/m² Shelf h ...

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

ASA 3303 Raw air extraction system Rated power 3260 m3/h, Filter area 2 x 3.6 m2, Power 400 V 50 Hz 1.5 kW, 2 dust bags G&STÜ-5123303

pHcbi MDF-DU901VHL-PE VIP ECO ULTRALOW FREEZER. The MDF-DU901VHL-PE VIP ECO -86°C ultra low temperature freezer provides maximum sample storage capacity within an optimum footprint combined with natural refrigerants to minimise energy consumption, reduce environmental impact and save money. 845 litre capacity. External dimensions (excl. handles & protrusions): 1150 x 870 x 1990mm (wdh). Internal dimensions: 1010x 600 x 1400mm (wdh). CFC free insulation and refrigerant. VIP Plus Insulation. Large LCD touchscreen Controller with graphical display of recent temperature history and USB port for data export. Fully automatic audible / visual alarm System complete with remote alarm connection. Status Alert monitors ambient and System conditions and notifies of any abnormal Operation. New EZIatch door handle with lockable outer door and with door hotline to prevent ice build up and two fully in ...

1903 ASA Aspirator Rated volume flow 1900 m3/h Low pressure max. 1700 Pa Filter area 1.92m2 Chip collection volume 110l Suction nozzle diameter input 203mm Suction nozzle diameter output 2x 100mm LxWxH 1000 x 500 x 2100mm Weight 39kg Engine 400V 50Hz 1.5kW G&STÜ-5128193

ABS 3880 Suction system 2 sack ABS 3880 2x300L Suction capacity 3880m3/h 3x100mm 2.3 hp S1/ 3.5 hp S6

MyRef MY-ZB26-TFD Refrigeration Unit MyRef MY-ZB26-TFD Condensing unit suitable for refrigeration applications Typical applications include Freezers in supermarkets and mini-markets Cold stores Beer cellar Milk cooling systems Standard equipment Copeland Scroll M Compressor ZB series with sound insulation hood Oil sump heating Liquid collector with burst protection Filter dryers Sight glass visible from the outside Ball shut-off valves Component-tested combined HD/LP safety pressure switch Electrical equipment: control box IP 55, compressor contactor, DIN rail mounting Condenser is integrated into the housing Condenser fins coated with epoxy resin phenol (gold lacquer) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; All screws  ...

IntNr231085 AR FILTRATIONI S.R.L. ARNO 2 series extraction: Air purifier mechanical AR 5-stage for emulsion mist/oil smoke Air capacity 2600 m3/h (1.5kW) Voltage Frequency 230/400 50 V Hz Noise level dBa approx. 70 Stage 1- Centrifugal condenser, self-cleaning Stage 2 - Knitted metal filter, washable Level 3 - Pocket filter Stage 4 - Fine filter mat, washable Stage 5 - Hepa ultrafine filter Total Unit Filter Capacity: up to 99.97% • Quick and easy maintenance, 1 time per year, high operational reliability • Robust design, small space requirement • Recovery of up to 80% of the condensed coolant • Design and function in accordance with current standards • Energy savings of approximately 415.00 euros per air purifier • Reduction of emissions of 9,000 kg CO2/year/plant • Protection of the sensitive parts of the WZM • Protects the environment and people  ...

SAA 902 Aspirator Fan wheel in bucket form Plastic fan wheel and housing Rated volume flow 1200 m3/h Vacuum max. 1100 Pa Suction nozzle diameter 100mm LxWxH 900 x 500 x 1550mm Weight 19kg Engine 230V 50Hz 0.55kW G&STÜ-5923902

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...

ABS 2480 Aspirator N E U MASCHINE ! Suction system ABS 2480 400V 2 hp 300 L chip sack Suction capacity of 2480 m3/h 2 100 intake connections Weight 51 kg METAL WINGS! Driving equipment! G&HM-ABS2480

Dust Extraction Plant Manufacturer: Nestro Year: 1991 Filter unit: Filter hoses: 121 pcs.(arrangement 11 x 11) / D230 x 2600mm Filte surface 261 m2, Filter material: category G Automatic motorized vibration cleaning / 4 motors Fire-extinguishing ducts Return air system Fire damper Pipes, Pipe bends Ventilators: Ventilators 3 pcs. a 7,5 KW, D 350mm Ducting, Ducting bends, ducting shutters with chains Control unit Nestromat 3 x Transducer coils for start automatic: 15 x

WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500 mm Width 250  ...

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48 700 watts new condition with operating instructions LWH: 1600 x 600 x 1400 mm

Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm

Temperature control device Manufacturer: gwk Type: teco cs 90 N°: 11936 Y.O.M.: 2002 Heating capacity: 9 kW Rated cooling capacity: 23 kW Maximum temperature circulating medium: 95° C LWH: 900 x 260 x 600 mm

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

Emulsion fission system, oil-water separation system (for the de-oiling of condensation in compressors) The cost-effective and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. that cleaned water complies with the legal Rules on channel discharge

Cooling & freezing chamber NN 2900x2200x2500 Type Cooling equipment Height 2500 Width 2200 mm Length 2900 mm

We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

Chiller / chiller air-cooled, Type: NTC 20 – 21 kW NOVATECH NOVATECH NTC 20 are air-cooled compact water chillers suitable for indoor / outdoor installation IP 54. Including shell-and-tube evaporator, buffer tank 110 ltr. and built-in circulation pump. Galvanized steel frame, hot painted with polyester powder. Extras: - Mounted expansion tank for internal water content only - Stopcock between water inlet and outlet, - Water outlet string regulating valve Cooling capacity kW 21 Cold water temp. Exit/Entry (°C): 15 / 20 Volume flow (l/min) max. 100 Available pump pressure (bar) max. 3.3 Ambient temperature (°C) 35 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 8.85 Max. current (A) 12.5 Starting Current Circuit (A) 19 Protection class: IP54 Dimensions: Length (mm) 1080, Width (mm) 950, Hei ...

Refrigeration unit, refrigeration system, refrigeration system, cooling compressor, refrigeration compressor used. TEKO TPX2-112 Built in 2011 compressor 2 pieces FRASCOLD Type: S 7 56 Y 56 m3/h each 380 V Dimensions approx. 1600 x 900 x 2000 mm All items are checked for function before delivery, if technically possible ! Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...