135,865 used machines on RESALE, but how to find them? Machine Search
1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...
used
Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition
Brotschneidegatter, Fabr. JAC, Type Swing, Semi-automatic
TASKI Swingobot 2000 Autonomous Scrubber Dryer Manufacturer: TASKI / Diversey Model: Swingobot 2000 Type: COR2000 Machine Type: Autonomous Scrubber Dryer Condition: used, fully operational Operating hours: approx. 38 h Serial Number: 7524396000434 Operating voltage: 24 V DC Power consumption: 1500 W Net weight: 471 kg Working width: 700 mm Suction bar width: 900 mm Fresh water tank: 90 l Runtime: up to 4 hours Theoretical area output: up to 1,260 m²/h Degree of protection: IPX3 Operation: autonomous or manual Navigation system: LIDAR and sensor system Touchscreen control panel Emergency stop switch Location: Teningen-Nimburg
Age 2000, Lower Form Table upgraded recently by Gabler to be able to run PET products, original closing force was 75kN, upgraded to 115kN. i.e. the Thermoformer can now work with PET, PP, PS, HIPS etc., Hours run only 37,500 hrs!, Preheater ILLIG VHW 72, 2-Roll Preheater for PP, Gabler SWING Thermoformer:, Max. sheet width 480 mm, Double Heating Oven, Max. Form Area 450 x 220 mm, Max. depth of draw 125 mm, Stacker / Counter, Delivery conveyor for Counted Products, Inline Skeletal Waste Material Winder, Max. Dry Cycle speed 44 cycles/ min., Machine is well maintained and in v. good production condition, Inclusive of:, 1 Bosch Sprang 6 cavity Ø75 PP cup tool, age 2000 with Stacker Parts, The mold is very sparingly used and in great condition., Film width: 480 mm, Form Area: 450 x 220 mm, draw: 125 mm
A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.
Siemens X-ray recording device Multix Swing with Generator IT S Swing 55 Tube Optiphos 135/30/55R 0.6/1.2 Vertical Tripod Vertix Swing • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Description – swivelling heating plate with two workstations 38x45cm – replaceable base plate – pneumatic – automatic opening and closing – pressure infinitely variable – energy-saving functionTechnical data: Machine dimensions 92 x 90 x 85 cm Voltage/power 230 V / 2.3 KW max. temperature 220 Time setting max. 99 min 59 s Weight 99 kg Weight Compressed air 6bar required on site
Siemens X-ray recording device Multix Swing with Generator IT S Swing 55 Tube Optiphos 135/30/55R 0.6/1.2 Vertical Tripod Vertix Swing • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. • We are dealers of used medical devices. We do not repair or refurbish any of the items we sell. All items are used and sold as is, unless otherwise stated. We do not give any guarantees or warranties for the devices sold. It is the buyer's responsibility to ensure that all equipment is thoroughly inspected and overhauled by qualified technicians prior to use on the patient.
Schon 8 LES hydraulic swing-arm clicker press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Schon 8 LES hydraulic swing-arm clicker press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Schon 8 LES hydraulic swing-arm clicker press Price: 4750 EUR Download PDF Schon 8 LES hydraulic swing-arm clicker press The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutt ...
Italdibipack Swing 4255 Shrink wrapping machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Italdibipack Swing 4255 Shrink wrapping machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Italdibipack Swing 4255 Shrink wrapping machine Price: 1325 EUR Download PDF Italdibipack Swing 4255 Shrink wrapping machine The machine is in full working order, ready for production, and in very good condition. The photos show the actual product being sold. Made in Italy. Description: The „Swing” series of L-sealer shrink wrapping machines is characterized by a comp ...
Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).
8 piece elements with ROeHMHELD swivel clamps, for conversions etc. further: 4 piece detto
Machine No. ST139K-53845, printing capacity 12 t, max. 60 mm stroke, table approx. 920 x 470 mm, stoessel approx. 560 x 350 mm, right exit switch disassembled, non-functional
Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale
description: AMS-machines mark themselves through their undestroyable basic structure. The method of construction is small and solid, later on these were build bigger for the increasing performance. With a good maintenance the machine will be available for a long time. Size: 0,5 and 0,3l Informations without guarantee. capacity: 12000 serial number: BVM 043 Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Kne ...
Directional Control Valve with Pneumatic Swing Actuator AMG / ROTELMANN SAD 002 Twin- Torque 0° / 180° 112670 8 bar 05-2033-591/0004 PN 6 DN 4 used, tested ! Dimensions: 200 x 130 x 50 mm
A swing arm cutting press with 495x450mm cutting table is offered. Equipped with handwheel, operating lever and cutting pad. Note: The machine is leaking oil and is therefore currently not in operation. Inspection possible by prior arrangement.
4 pieces damping elements BILZMachine feet, oscillating elementsType Faebi 430 HDBeload 27500-65000 NBload 2750-6500 kgWorking height: 95 mmBase plate: 500 x 500 mm x 10 mmSupport diameter: 315 mmNominal diameter 480 mmAir pressure: max. 6 bar- Fastening thread M20 in the center of the damper- Damper with two-chamber systemvery good conditionIdeal for press, punching machine or punching nibbling machines.Weight per piece: 53 kggood condition; used
Hydr. Swing cut guillotine shears HERA type HSS IIIFabr. No. 598 Year of manufacture 1986Cutting length 3100 mmCutting thickness 3 mmStand projection 200 mmKnife strokes 25 strokes/min. Mains connection 380 Volt, 50 HzMotor power 3 kW- motorized adjustable back gauge 1070 mm- actual digital display for the back gauge- cutting gap adjustment- cutting length adjustment- front side stop left 1000 mm- 4 pieces sheet metal support arms 1000 mm- el. Foot switchSpace requirement without sheet metal support arms L x W x H 3630 x
Swing-cut guillotine shears KÖLLSCHEN type BSK 2000/2Fabr. No. 69 1307 Year of construction 1969Cutting length 2000 mmCutting thickness 2 mmStand projection 90 mmWorking height 920 mmMains connection 380 volts, 50 HzEngine power 4 kW- Drive via geared motor with brake and crankshaft- mechanical sheet metal hold-down- manual back gauge 500 mm- stop adjustment via 2 handwheels, rear on the backgauge guide with measuring scale- front side stop left 720 mm- electric foot switch- manual
Overview The swing top closing machine was built in 2004 by the German manufacturer Rico. The machine is still in operation and can be inspected at any time. Technical data Output: 12,000 bottles/h Formats: 0.33 l (Steinie bottle) 14 capping stations Running direction: clockwise Touch panel for operation Control system: Siemens S7
Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right
Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device
Carousel-type machine with 24 closing points., Additional title: with 24 capping heads, Capacity of filling line: 5000 bo/h, Features: switch cabinet with control panel, 24 capping heads
Rotary machine for capping swing-top bottles, Capacity: 18000 bottles/h closing heads: 24 pieces, Power: approx. 5 kW, Water: approx. 200 l/h, Compressed air: approx. 2 cbm/h, Length: 3,3 m, Width: 2,2 m, Height: 2,4 m, Weight: 3000 kg, Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm, Running direction: right - left, Material: Stainless steel, wear-resistant plastic, Base construction: miniaturized, hygienic machine table in outward beveled design, Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station, without control cabinet
Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available
Steinie swing-top bottle 33 cl Plastic bracket with red, glued seal Quantity: approx. 40,000 bottles can also be supplied without bracket
maximum number of results exceeded
please refine your search
500 € 
