9 offers mae

Category: 106 presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157248544
New in: 1987
used
Seller: country-de
Price: 8.950 €

Hydraulic press, single column high-speed cycle press, C-pillar press, oil hydraulic press -Pressure: 63 t -Projection: 355 mm -Stroke: 800 mm -Installation height: 1000 mm -Table surface: 1100 x 670 mm -Height of the table above the floor: 1000 mm -Lifting speed - forward: 17 - 150 mm/min -Lifting speed - return: 441 mm/min -Plunger surface: 795 x 550 mm -Total power requirement: 29 kW -Machine weight: approx. 7.2 t -Space requirement: approx. 5.3 x 2.2 x 3.7 m -Further information -Rapid traverse speed: 225 mm/sec -Horizontal cylinder: -Pressing force: 400 kN -Stroke: 700 mm -Forward speed: 25 - 125 mm/s -Reverse speed: 75 - 375 mm/s -Ram bore: Ø 50 x 85 mm

Category: 106 presses / Hydraulic Presses
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794605
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Hydraulic single column press make MAE type S-RH 160Max. Pressure: 160 tProjection: 360 mmStroke: 500 mmPressure piston diameter: 280 mmDrive power: 22 kWWeight approx: 10 tDimensions approx: 1800 x 1400 x 3000 mmWith- with horn dimensions: 720 long, 570 x 570 mm side lengthxa0xa0 with 1 T-groove on topused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 106 presses / Straight-Bending Presses
Latest update: 25.04.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 158794639
used
Seller: country-de WAHO Werkzeug- und Maschinenhandelsges. mbH

Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 106 presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156965415
New in: 1984
used
Seller: country-de Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
Location: Metzingen

pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156885959
New in: 1991
used
Seller: country-de Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel

pressure: 100 t throat: 380 mm stroke: 300 mm arm length: 380 mm table surface area: 1700x700 mm ram surface: 1400x700 mm dayligth: 650 mm total power requirement: 30 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2400x3600x3400 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Bending And Straightening Presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157045339
New in: 1972
used
Seller: country-de ATMH werkzeugmaschinen-Handel GmbH
Location: Ennepetal - Halle 3

pressure: 160 t throat: 400/720 mm stroke: 350 mm Make MAE Type HY S 160 RHS Year of construction 1972 Press Down Pressure. 160,000 kg Pressure up up 42400 kg Ram stroke 350 mm Projection / table depth 400 mm / 720 mm Installation height 800 mm Table width 2300 mm Table height 800 mm Total height / width / depth 300 mm / 2300 mm / 2100 mm Ram speed dev. 16.7 sec up up 4.55 sec with 350 mm hub Ram hole 80 (H7) x 130 mm 2.4 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 156886030
New in: 1991
used
Seller: country-de Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel

pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Shaft Straightening Presses
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157045441
used
Seller: country-de ATMH werkzeugmaschinen-Handel GmbH
Location: Ennepetal - Halle 3

pressure: 63 t throat: / mm stroke: / mm total power requirement: 5,5 kW Manufacturer: MAE Type: S63 RH SOND Construction year Press Print Down. 63,000 kg Print up. 42400 kg Total power requirement 5.5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
Latest update: 29.11.2022 add to watchlist
approved
dealer
ankerimg
item-No.: 157170637
New in: 1977
used
Seller: country-de

Single stand - hydraulic press MAE type S63SZ SO Masch.Nr. 551277 year of construction approx. 1977 pressure force 63 ton. Projection 320 mm table surface 850 x 630 mm set area 1050 x 500 mm set pile stroke 500 mm inredge height max. 730 mm table height over corridor 970 mm tank capacity hydraulics 600 liters drive power 15 kW connection connection 380 volts, 50 Hz - Hydraulic drawing cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Wed space requirement L x W x H 2000 x 1200 x 3420 mm weight approx. 5 ton. The machine is working, the control cabinet is mechanically damaged. During the test run, the machine reaches a pressing force of 50 tons, presumably a pressure relief valve flows off.; used

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
RESALE used machinery 25 years online