stone cutting used for sale

Pizza oven with one floor, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x156cm Internal dimensions: 105x70x15cm Electric power: 1 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 320 kg

Pizza oven with two floors, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x194cm Internal dimensions: 105x70x15cm Electric power: 2 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 500 kg

Key data: 24 , 30 , 400

Execution: Aggregate type: stationary Design: Soundproofed Technical data engine: Engine manufacturer: Deutz Engine type: F 4 M 2011 Motor power: 27 KW Cooling: Oil-cooled Start: Electric 12 V DC Speed: 1500 rpm Fuel: Heating oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator Type: Synchronous Generator power: 30 kVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Remote start Switch: Generator switch 4 pole Delivery: Assembled Tank: Version: Base frame tank with drip tray Content / Litre: 50 Dimensions of the unit: Width approx. mm: 960 Height approx. mm: 1,236 Length approx. mm: 2,000 Weight approx. KG: 1.075 Use: Bearing number: 1229 Condition: Demonstrati ...

ID3532 FC Maschinenbau-Schlüsselbauer-Schindler year/Baujahr 1995/2010 Fully automatic stone finishing system (edge aging, bush hammering, impregnation) Fully automatic stone finishing system for the artificial processing of concrete block surfaces and edges, as well as for impregnation. The special feature of this system is that, unlike conventional processes, only the edges can be aged. Furthermore, the system also allows bush hammering of the stone surface. Fully automatic brick finishing system (stone edge aging, stick planting, impregnation) Fully automatic stone cutting system for the artificial processing of concrete block surfaces and edges as well as impregnation. The special feature of the system is that, in contrast to conventional processes, only the edges can be aged.  In addition, the system also allows the stone surface to be hammered. More details and price ...

1 TUPESA rotary garment dyeing and washing machine type STONE 550, capacity up to 550 Kg (constructor indication and depending on articles) drum diameter 1950 mm x depth 1700 mm (volume 5000 L)

Dimensions (L/W/H): 3200x2000x1950 mm Weight: 1500 kg Total power requirement: 5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Used filler Stone gravty filling 4.000 bph: Year: 2015 Condition: Good Used filler Stone Year: 2015 Speed: 4.000 bph Direction: Clockwise 20 filling valves Type of filling: Gravity filling Safety protections Filler Code: T 154 More details: https://bottlingscout.com

Used Used Washer-Dryer Stone Industries 8.000 bph: Year: 2007 Condition: Good Used Washer-Dryer Stone Industries 8.000 bph: Model: LB20 + S20 Year: 2007 Clockwise direction Speed: 8,000 BPH Number of washing heads: 16 Air blade drying system Measurements of the diameters of the bottles processed: ? 66 mm; ? 76.1 mm; ? 80.3 mm; ? 82.4 mm; ? 88.4 mm; Safety protections Code: M 80 More details: https://bottlingscout.com

Used Used Washer-Dryer Stone LBS10: Year: 2002 Condition: Good Used Washer-Dryer Stone LBS10: Model: LBS10 Year: 2002 Direction: Clockwise Speed: 5.000 BPH Air knife drying system Measurements of the diameters of the processed bottles: ? 61 mm; ? 66 mm; ? 76.1 mm; ? 77.6 mm; ? 80.3 mm; ? 82.4 mm; ? 88 mm; ? 88.4 mm; ?106.5 mm Safety Protections Code: M 81 More details: https://bottlingscout.com

1 x Polar 115X guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar RA-4 jogger 1 x LW 1000-4 stack lift 1 x TR-130 unloader

1 x Wohlenberg 132 guillotine equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA 3 MAN unloader 1 x Baumann BB5 stack lift

1 x Wohlenberg 132 guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Baumann BA3 unloader (year 2008)

Unit for precision cutting Make: IMA

CUTTING LINE - refurbished - consisting of 1) Polar137EM-MON AutoTrim = Cutting LINE 2) Unloader/palletiser TR TR1 EL145-1 LH standing 3) Jogger RA-B-5 with air removal roller 4) Paper Lift Full description of Equipment on request

Manufacturer: MITSUBISHI Model: Laser Cutting Machine Year of Manufacture: 2017 3000×1500 mm Power: 2.7kw Technology: Co2 2 changing tables AVAILABLE: immediately Find more here - / Contact us at -

Manufacturer: Cutting Trading Model: LC1 Automatic Unwinding Machine with Cross-Cutting Function Year of Manufacture: 2021 Technical Specifications: Maximum Roll Load Capacity: 800 kg Maximum Roll Diameter: 600 mm Maximum Feed Speed: 400 mm/s Maximum Cross-Cutting Speed: 400 mm/s Usable Width: 2200 mm Positioning Accuracy: 0.5 Find more here - / Contact us at -

Polar 115 Autotrim Cutting Line Year 1999 Size 115 Cm Transomat TR 130 EL-4 Jogger RA-4 Lifter LW 1000-4

Polar 115 Autotrim Cutting Line Year 1999 Size 115 Cm Transomat TR 130 EL-4 Jogger RA-4 Lifter LW 1000-4

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately

Waterjet cutting machine with plasma Manufacturer: TCI Cutting Type: BP-C 4020 Year of Make: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 hp 4,000 bar with high-pressure pump 1 Plasma cutting head with Hypertherm XPR300 power source TCI SRA 4.0 High Voltage Control System Abrasive transfer system Abrasive measuring system Anti-collision system Water treatment plant TCI HIDROSYSTEM 2.0 Sludge removal system Lantek Expert 2D software with automatic nesting function

INCLUDED ELEMENTS - High pressure pipes - TCI Cut Control 3.0 - Software communication TCI Online 1.0 - Height control system TCI SRA 4.0 - Abrasive transfer system TCI Abraline 1.0 - Class IV safety system and CE marking - Abrasive metering system TCI Abrasive 3.0 - Anticollision system TCI Collision Protection 2.0 - Cutting table with 1 cutting head KMT Active IDE - Numeric control TCI CNC 4.0 - TCI Smart Touch 6.0 - KMT OEM SL-VI 50 HP 4,000 bar, 1L high pressure pump - CAD/CAM Lantek Expert 2D with automatic nesting - International support Lantek - Proportional control valve KMT 50HP OEM - Water treatment equipment TCI Hidrosystem 2.0 - Water/oil closed loop chiller - Sludge removal system TCI Extraction System 2.0 4020 - Submerged cutting system TCI Subwater 1.2 C - Installation and set-up - Training software CAD/CAM in cutting facilities - Training cutting and maintenance - Plasma ...

Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

- Touch Screen Monitor - Autotrim - Air table - Side air tables, left / right - Air corners - Lift LW 1000-4, 2000 - Jogger RA-4, 2006 mit Waage - Transomat TR130EL-4, 2008 - Spare knife

· Rotary Die Cutting Machine with Magnetic Cylinder · Easily replaceable die · Automatic feeding with double sheet detection and automatic correction · Double magnetic cylinder with anti-splitting coating · Indicated for slit and semi-cutting in adhesives, labels, cardboard, etc. · High pile suction feeder · Touch screen · Machine with automatic stripping · Front registration TECHNICAL SPECIFICATIONS · Max sheet size: 480 X 740 mm · Min sheet size: 240 X 280 mm · Max final product size: 456 X 720 mm · Min final product size: 50 X 80 mm · Min distance (depends on the material): 5 - 8 mm · Max die size: 480 X 750 mm · Min die size: 160 X 100 mm · Die height: 1 mm · Die cutting accuracy: ± 0,1mm · Material thickness (die cutting): 0,2 - 0,5 mm · Material thickness (max creasing): 0,4 mm · Feeder stack height: 500 mm · Max speed (depends on t ...

1 Qty.1 Second-hand brush grinding machine Mfc.: Gurutzpe Type: Brushes cutting machine Built: 1975 Model: Max. Q800x2500 2 Qty. 1 Second-hand Rubber Grinding Machine Mfc.: Churchill Type: PCH 24" X 96" Built: 1957 Model: Max. Q600x2400

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

CHEESE PORTION CUTTING MACHINE SLICING MACHINE AGED CHEESES GOUDA, EDAM, MIMOLETTE, CHEDDAR AND MANY KINDS WITH PLC CONTROL AND HMI OPERATOR PANEL COMPLETE STAINLESS STEEL THICKNESS IS ADJUSTABLE

Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC  ...

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !

Corner cutting Krause

Type: Bizerba A404 Blade diameter: 330 mm Max. product length: 540 mm Max. product size round shape: - min. diameter: 50 mm - max. diameter: 180 mm Max. product size rectangular shape: - min size: 50 х 50 mm - max. size: 175 х 240 mm Slice thickness: 0,5 - 12 мм infinitely adjustable Voltage: 400 V, 50Hz Delivery time: 1 working day after payment

Size: 330 mm Equipments: cutting thickness 40 mm

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, tray max. dimensions: length 800 mm, width 600 mm Condition Used Producer Krumbein Made in Germany Description Krumbein KSSM 1,4 D semi-automatic cutting machine single blade cutting system cutting takes place on two levels – the first level is cut transversely the second – longitudinally raising the tray from level to level is done manually the distance between the knives can be adjusted the knives are easy to remove product max. height 55 mm power 400 V/3 Ph/ 50Hz 1,6 A

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, tray max. dimensions: length 800 mm, width 600 mm Condition Used Producer Krumbein Made in Germany Description Krumbein KSSM V 0,1 D semi-automatic cutting machine double blade cutting system cutting takes place on two levels – the first level is cut transversely the second – longitudinally raising the tray from level to level is done manually the distance between the knives can be adjusted the knives are easy to remove product max. height 55 mm power 400 V/3 Ph/ 50Hz 1,8 A

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Astor Blades condition: Renovated In store Made in Germany Description for trays 400x600mm universal tray lock ruler cake cutting templates Pneumatic knife PM10 works on compressed air 2 types of blades

This RALC ITALIA CUTTING LINE LYBRA was manufactured in 2014. It features an automatic circular blade for cutting metal tubes, including solid, tubular, and profiled types. Key components include a bar loader up to 6500 mm, multiple cutting capabilities, and a Siemens PLC for enhanced control. Ideal for high precision metal cutting. Contact us for more information about this machine.

Size: 0x0 Equipments: With hot glue machine

This ANTHON CUTTING SYSTEM was manufactured in 1994. It features a Siemens S5 control system, a portal feeding system with suction crossbeam, and a saw carriage with scoring and main saws. Ideal for handling package heights up to 150 mm. If you are looking to get high quality cutting capabilities consider the ANTHON CUTTING SYSTEM machine we have for sale. Contact us for more information about this machine.

Size: 920×1300 mm Equipments: Maximum sheet size 920×1300 mm, minimum size 560×1300 mm opening width within frame 920×1310 mm, maximum die size 910×1300 mm maximum die-cutting area 900×1300 mm, maximum gripping edge = 16 mm, minimum gripping edge = 8 mm maximum card thickness 3 mm (also with micro-flute and flute zero), maximum compressed air pressure 500 t, maximum stroke rate 5500/h infeed stack height 1100 mm, outfeed stack height 1100 mm, main motor power 18 kW, main motor power consumption 17 kW, speed 5500 strokes/h. Machine dimensions (L x W x H): 6835 mm x 3580 mm x 2690 mm. Total weight of the machine including the insert approx. 30 t, weight of the machine without the insert approx. 29 t

Knife length: 320mm. Auction-ID: A1-46805-12157

Knife length: 320mm. Auction-ID: A1-46805-12156

Used and unchecked Table size 50 x 54cm 18009208 Auction-ID: A7-46481-10

Manufacturer: Spielvogel Model 2700 Year Of Manufacture: 1990 Type of Machine: Block Stone Circular Saw Machine Details: Blade diameter approx. 270 cm, 380V, 50Hz Machine Powered: Yes Operating Hours: Approx. 30,000h Additional Accessories: Rotary table, automatic cutting sequence Find more here - / Contact us at -

SPECIFICATIONS: Installed power: 1.8 kW Voltage: 230 V Saw blade: Ø 380 mm

Type: Stone cutting machine Blade: Diamond disc Cooling: Water cooling Electrical supply: 380V 3F 50 Hz Current: 20 A Auction-ID: A7-46477-11

Unused, Saw blade diameter: 420 mm, 2800/min, max depth: 140 mm, 230v, including extra saw blade, extraction. Auction-ID: A1-40138-185

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...