We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,335 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
ARBURG ALLROUNDER Arburg Allrounder 720 S 3200-1300 - Plastic Injection Machine screw size:70 mm injection shot weight in Polysterol:984 g/PS closing pressure:3500 kN core drawing:2 control:Selogica daylight:720 x 720 mm opening stroke:700 mm mould height - Max./min.:300 -700 mm daylight between platens - max.:1000-1400 mm weight of the machine ca.:17,7 t - highly wear-resistant plastification unit - Technology step 3 - hydraulic plant with 3 regulating pumps - Technology step 2 - servo-controlled / two-circuit pump technology - Increased power for heating control circuits 1-6 to 3.6 kW each - clamping force increased to 350 Mp - mould blow unit 1 with pressure reducer - mould blow unit 2 with pressure reducer - Core pull 1 - Core pull 2 - Interface for robot system according to EUROMAP 12 - Host computer interface for ALS with communication node Ethernet
used
The Milestone UltraWAVE microwave mineralizer is a unique device. Structurally and ideologically completely different from classic mineralizers with closed vessels. UltraWAVE works in SRC (Single Reactor Chamber) technology - a single reactor chamber. The said reactor is made of a thick stainless steel jacket, capable of maintaining extreme conditions inside: temperature up to 300 ° C and pressure up to 200 bar. This allows the full mineralization of the heaviest samples in an even shorter time. Inside the chamber, we can place several types of vessels (Teflon, glass, quartz) in a 22-position holder. The dishes are immersed in water. Thanks to this, we have an absolute guarantee that all samples are in the same conditions. The individual vessels (test tubes) are not closed or screwed, only the lid is put on, which greatly facilitates and speeds up the entire process and significantly ...
used
DLyte 10 is a metal surface finishing equipment using dry electropolishing technology, It is suitable for companies with medium production volume. It is designed for high value, very small, fragile and delicate parts that require high finishing requirements, as well as for research and development purposes. and for research and development purposes. Its automatic, one-step process reduces the complexity of todays multi-step finishing processes, while improving profitability and repeatability. repeatability. This machine does not require a closed system to recycle water and sludge. water and sludge treatment, reducing space, labor and permitting space, labor and the environment. It is suitable for rooms with a working volume capacity of 140 Ã mm x 75 mm and a maximum weight of 2.5 kg.
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H50 mm -Total weight: 1.5 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Quantity: 3x set of interchangeable jaws available -Price: per set -Total dimensions: 70/60/H50 mm / 70/60/H54 mm -Total weight: 1.1 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo techn. drawing -Total dimensions: 80/90/H55 mm -Total weight: 1.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 65/80/H45 mm -Total weight: 1.2 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 61/72/H48 mm -Total weight: 1.0 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 66/60/H43 mm -Total weight: 0,8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 82/63/H74 mm -Total weight: 1.0 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 55/48/H40 mm -Total weight: 0.5 kg/set
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/65/H45 mm -Total weight: 1.0 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.1 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 24 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/90/H80 mm -Total weight: 3.1 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Quantity: 2x set of interchangeable jaws available -Price: per set -Total dimensions: 64/54/H46 mm -Total weight: 0.8 kg/set
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 52/55/H42 mm -Total weight: 0.6 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 63/55/H46 mm -Total weight: 0.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 65/72/H63 mm -Total weight: 1,6 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Total dimensions: 56/48/H40 mm -Total weight: 0.5 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 18 mm -Dimensions: see photo technical. drawing -Total dimensions: 65/54/H42 mm -Total weight: 0.6 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Base jaws for three-jaw lathe chucks -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 79/60/H40 mm -Total weight: 0.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: rotating jaw set for four-jaw chucks, soft -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 140/140/H100 mm -Total weight: 8.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/77/H53 mm -Total weight: 1.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 84/75/H60 mm -Total weight: 2.0 kg
used
Combined Cycle Gas Turbine Power Plant 75 MW/50 Hz – Zero Hours This equipment was delivered in 2017 by an EPC contractor who selected Rolls-Royce and Siemens as main equipment suppliers. This was a greenfield project and therefore delivery contained all equipment needed for 75 MW power plant operation, like fuel gas treatment plant, water treatment plant and complete switchyard with step-up transformers Manufacturing year: 2017 Gas turbine: Rolls-Royce Trent 60, Dry Low Nox Steam turbine: Siemens SST-300 Step up tranfomers: 2 pc Alstrom 11kV to 154 kW Complete switchyard: Siemens 154 kV Nominal output 100%: 60 MW + 15 MW Max efficiency: Single cycle 42 %, combi cycle 54% Heat recovery steam boiler: 30 bar / 300 C Water treatment: Sand and active coal filters + RO Documentation: Complete original in English Delivery: Complete plant equipment from water and gas t ...
used
Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler contains a durable, electronically controlled, water cooled moving grate which is designed to burn from wood pellets to wood chips and waste wood. The plant was installed in year 2012 and it has been running with wood pellets till December 2022. It is complete, good condition plant with concrete element building, two large pellet silos and a hot water accumulator tank for heat load balancing. These items will be optionally available for those who are interested in them. It has load controlled primary and secondary air combustion fans as well as speed-controlled exhaust gas fan which ensures high efficiency combustion and low electric power consumption. Two step combustion is designed for low NOx emissions. The durable triple layered ceramic and steel combustion chamber includes flexible dilation joints ...
used
Key data: 2400 , 400
CHP Power Plant with 2 x CAT 1.2 MW / 50Hz Gas Generators – 2013 Complete, well maintained Combined Heat and Power plant build in year 2013 by local CAT dealer with two CAT G3516C gas engine driven generators coupled with heat recovery systems for hot water production. The plant was in operation till mid 2016 and currently installed and powered. Heat recovery systems have two circuits, one for engine jacket water and second stage of charge air cooler and another circuit for the first stage of charge air cooler and exhaust gas heat recovery. Exhaust gas tubular heat exchangers have exhaust gas by-pass option. Total accumulated operating hours are 16000 and 19000 hours only. Engines has been serviced by a local CAT dealer in accordance with maintenance manual and they haven’t had any major breakdowns. Engine control system is standard CAT model with Siemens logic, switchgears and s ...
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 21 mm -Dimensions: see photo techn. drawing -Dimensions: 76/85/H53 mm -Total weight: 1,6 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 92/97/H67 mm -Total weight: 2.9 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/64/H60 mm -Total weight: 1.4 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 131/102/H80 mm -Total weight: 5,4 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 80/66/H54 mm -Total weight: 1.4 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Total dimensions: 94/120/H76 mm -Total weight: 3,2 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 80/78/H78 mm / 78/78/H75 mm -Total weight: 2.5 kg/set
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 75/67/H58 mm -Total weight: 1.9 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 24 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/73/H68 mm -Total weight: 2,4 kg
used
Machine crossing with platform (bridge) 4570-880-2600 RA1996 Technical data: Manufacturer: In-house production Type: machine crossing with pedestal Condition: very good (used) Total size: 4570-880-2600 mm (WxDxH incl. handrail) step dimensions: 240 x 800 x 35 mm step/tread height: 200 mm platform dimensions: 850 x 800 mm Platform height: 1400 mm bottom edge 1600 top edge Steps: 8 (7 steps + platform on each side) Weight: 390 kg Next TÜV: 02.2023 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics
used
DC-445 creasing: Up to 15 creases per sheet 30 job programmable set up and storage Up to 50 A4 sheets per minute 110-350gsm nominal paper range 100mm feed pile height for unattended operation Suction feed to eliminate marking 0.1mm increments and ±0.3mm accuracy Step by step set up panel
used
York YLCS0725AA 50Y A Chiller 296 kW Application The YLCS SA/HA/AA series of liquid chillers are designed for cooling water and water-glycol mixtures. Eurovent certified product • Two refrigeration circuits • Small footprint • Step-by-step power control • Star-triangle run-up Number of refrigeration circuits: 2 400 V Power: 222 kW Refrigerant: R134a YOC 2006 Length: 3800 mm More chillers new and used - you can find in our shop! International shipping costs on request!
used
Steel stairs, external stairs, attached stairs -Steel stairs: Add-on stairs with gratings and railings on both sides -Width: 880mm -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Town weight: 150 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 1.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 25 mm -Dimensions: see photo technical. drawing -Total dimensions: 105/75/H58 mm -Total weight: 2,2 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/75/H55 mm -Total weight: 2,0 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 88/78/H60 mm -Total weight: 2,3 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 87/79/H55 mm -Total weight: 2,0 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 83/77/H53 mm -Total weight: 1.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Total dimensions: 87/76/H54 mm -Total weight: 1.8 kg
used
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Total dimensions: 130/100/H80 mm -Total weight: 5.4 kg