steam unit used for sale

Hydraulic agregate with Bob and cooling, engine made in Swden 55kW, cubic capacity 300 dm per min, pressure 31,5 MPa, transport weight ca. 800kg. Ready for work.

White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...

Make: KÜBA Type: SGK 153 Slats distance 10mm Length: 4200mm Volume: 161.20 l Power approx.80KW at minus 40C foldable with insulated drip fir with 3 fans WOODS, total power 6300 watts for shock frost 2 pieces available Info: 0043-6641838175 or info@frigocom.at Price on request

Hydraulic power pack 22kW - year of construction: 1989, type HC 9, with MOOG pump 88 L / min, 130 bar, oil tank 320 L, 1, 5kW compensation pump and oil cooler equipped with.

For sale: USED Diane XT HMI Control Panels , 1 x PP250 & 1x PP450, USED and in good working condition email for photos and price Ex-Stock UK

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Description Brand Caselli ID 7208 Status Active Price 3.700 € + VAT Year of manufacture 2014 Location Oradea (RO) Wood drill for chair assembly Caselli manufactured in 2014 with 4 drill heads and motors. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

for Mechanics: IRB6600/6640 Control: IRC5 M2004 Year of construction: 2011 Condition: used spare parts carrier Accessories: No accessory. Including: DSQC 668 DSQC 663 DSQC 627

Swivel unit, OSE-A45-8, Schunk, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

Short stroke unit, linear guide, 52.25.4.0150, travel 150mm, fibro, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. The drive of the unit is a plunger cylinder system with adjustable end position damping. The linear movement is alternately generated by one of the two oil-loaded cylinders. Operating pressure 80 to 120bar, Assembly and operating instructions, spare parts list and drawings Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically supported backwash: Backwashing medium frequency-controlled RückspülpumpeNeutralisation: neutralisation tank: Material PENutzvolumen: 5.0 m³ material, shaft and stirrer: beschichtetDosierstationen steel: ...

Treatment plant (quarry, construction waste)MFL Machine Factory Liezen Radmobile plant Impact crusher MFL RCI 100.130; Hewitt-Robins Vibration Vibrator; Spitzer Silo substructure type SK248; control and all attachments, conveyor belts motor, etc. plant is running. Contact via email: info@germantp.com

Nitrogen tunnel 600 mm wide x 7000 mm long. Excelent condition. New SS belt. 3x 380 V

Mobile strech bander suitable for grouping + banding of folding boxes asn. Output: up to 40 bundles / min. PLC: Siemens S5.

Equipment / Additional information: JEWA Flexo Rotonir SM52: M.No.: 02010-0017 BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Microfiltration system for salt bath disinfection Power: 1,000 litres per hour

Qty. 1 Second-hand laser tube wall thickness measurement unit Mfc.: MSG Maschinenbau GmbH Built: 2009 Determination of wall thickness using laser technology. Max. loupe dia.: 85 mm (can be modified) Wall thickness: 11 – 14 mm Loupe length: 250 – 600 mm Operation speed: 1.3 m/sec. Power: 6.5 kW, 400 V, 21 Amps., 50 Hz Air pressure: 6.0 bar Scope of supply: Removal device Feeder Saw inlet channel Vertical drivers Vertical & horizontal straightener Heavy-duty metal circular saw Blow-out and suction device Weighing device (calculation) Catchments Loupe crane Suction unit Hydraulic aggregat Collection stand

Shock evaporator, TK evaporator ECO 54B12, with 4 fans, Y.O.M. 2013 with 12 mm slats for shock.with defrosting heating. Power in KW 45.

Refrigeration unit for cooling spot welding machines and rolling scaffolds.Cooling capacity 5,500 watts

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

FOR SALE ... AURA MARINE BOOSTER UNIT HAVE A GDY SIR; WE VE COMPLETE AURA MARINE BOOSTER UNIT . IT IS IN GOOD CONDATION AND READY TO LOAD ON TRUCK. BOOSTER UNIT USED AT 10000kW ENGINE PLS FIND SPECT AT BELOW TYPE : AMB-M - 18 - SS NO : 6719 YOB : 2006 APROVED : BV MADE IN : FINLAND IF YOU HAVE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

1. feeding conveyor belt 10000/ 800 5.5 KW 2.shredder technofer CC940 SO 55 kw 3. extracting conveyor belt 12000/ 800 2,2 kw 4. heavy contaminants settling tank technofer vads 2,2 kw 5. washing centrifuge technofer LO 25 37 kw 6.conveyor belt 4000/ 800 2,2 kw 7. conveyor belt 6000/800 2,2 kw 8.wet grinder 800/800 55 kw 9. extracting auger 300/ 6000 2,2 kw 10.washing centrifuge jiangsu fungsheng fs 1000 55kw 11.extracting auger 400/7000 2,2 kw 12. screw press 75 kw 13. dry grinder 55kw 14. blower 11 kw 15. serpentine dryer with hot air generator 30 kw 16. stocking silo with mixer 3,6 kw 17.double stage cascade extruder granulator FDJ 130/150 - cutter compactor motor 75 kw - first extruder d130 motor 132 kw - second extruder d 150 motor 55kw - t ...

Meurer Machine type: CM/HBB40-T80 Built :2000 V:400/230 Kw:19

We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!

Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.

Refrigeration unit Bitzer LH104 2CC-4.2Y-40S

Ultrasonic measuring and testing unit suitable for pipes up to 200 mm in diameter Manufacturer: ConPro Type: DMCON 200 Built: 2008

Composite equipment Bitzer with original condenser Freezer / normal cooling -4x compressor Bitzer 6F-40.2Y -Cooling capacity: 330 kW at -10oC/40oC, 180 kW at -25oC/40oC, 100 kW at -35oC/40oC -Volume: 4 x 151.6 m3 -Number of pieces in stock: 2 pieces -Refrigerant: Freon -With original condenser -In very good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Emolsion vacuum cleaner Make: Ringler Type: RI 502-D 4 kW 2895 rpm 400V, 50 Hz with suction hose, and various inserts Condition: barved, but functional Only to traders is sold. All information without guarantee

2 pieces available For more information, please refer to the enclosed photos.

Key data: 95 , 9

ready to work, 9 kW, 95 C

Key data: 95 , 9

ready to work, 9 kW, 95 C 2 pcs. available momently

Qty. 1 Second-hand Refining system using Argon Mfc.: FOSECO GmbH Model: FDU Type: Roto-Stativ Built: 2005 Max. pressure: 5 bar Capacity: 28 000 T/annum Degassing and purifying of non-ferrous metals and alloys by argon or nitrogen. Max. revolution: 400 RPM Power: 2.2 kW, 440 V, 3 ph., 50 Hz Rotor shaft length: 2000 mm Rinsing time: controlled in the range of 1-20 min. Degassing head lift: Mfc.: W. Flender Lifting speed: 3 m/min. Motor power: 0.75 kW Total weight: 1050 kg

The Aerzen blower unit, which was manufactured in 1986, is a reliable and powerful solution for various applications. With an operating pressure of 1.05 bar, it provides the necessary compressed air for industrial processes, ventilation systems or other applications. The blower unit has been carefully manufactured and is characterized by its durable construction and efficient performance. It is designed to generate high airflows while maintaining stable operating pressure. We would like to assure you that we can offer you the best possible price for this blower unit. The price is negotiable, so we can respond flexibly to your requirements. If you would like more details about the blower unit or have any questions, please do not hesitate to contact us. Our team will be happy to assist you and answer your inquiries promptly. Contact us today to learn more about this Aerzen blower  ...

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators

# 1265 SISE Hot Channel Control Device M-Series Cabinet Type: M4U-16.00 No.: 90106B Zones 16 A used

Gyson Shot Blast Unit Model; Super 6

For sale are 2 Asymtec Automation 402 for PCB assembly The price is per unit Travel range approx. 300mm in the cross movement

Sell an ET feed fully assembled for a Uhlmann packaging machine UPS 1-4 Replacement feed overhauled

1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...

Material width max. 820 mm PET 12 to 20my OPP 15 to 75 my BOPP 12 to 75 my OPA 30 to 50 my Paper 45 to 110 g/m2 Composite foils with aluminium 40 to 250 my Composite foils without aluminium 40 to 250 my Main functions of the machine Previously used for priming and varnishing various plastic films and composites, also used after digital printing. Technical specification Unwinding Roll diameter Up to 1 000 mm Core diameter 76 and 152 mm Roll weight Up to 1 000 kg Side edge control FIFE DP-30 Web Guide Controller. Pre-treatment station Corona AHLBRANDT TG 3104-TP Gravure coating unit 2 coating carriages 1 for primer and 1 for varnish. For coating cylinders circumference 350 to 860 mm. Bale width 900 mm Some coating cylinders. DRYER With circulating air up to 120°C Dryer length 2 x approx. 2.2  ...

Foil shrink gun Shrink gunHand shrink gun Manufacturer Ripack Type 2000 Functioning: The packaged goods to be packed are, for example, coated with a polyethylene film as a shrink hood. After overputting, the film is heated with the Ripack 2000 hand-shrink gun. As a result, the film surch shrinkage forms to the packaged goods. A slipping on the pallet is prevented daurch! The goods are thus also protected against contamination and moisture. Special price

Item nr.: 907572-0000 Counter Omron for Tetra Pak machines Omron high speed counter unit, C200H-CT001-V!

Hydraulic

consisting of: 2 x tilting station 1 x ventilator 2 x reservoir Piping

Shrinkwrapper capacity: approx 60 packs / min (single-lane) Presently equipped for handling of the following formats: 0,33l cans – 0,5l cans 3 x 4 = 12 cans shrinked in foil (printed), without pad 6 x 4 = 24 cans shrinked in foil (printed), without pad

Shrinkwrapper capacity: approx 120 packs / min (double lane) Presently equipped for handling of the following formats: 0,33l – 0,5l cans 3 x 4 = 12 cans on pad, shrinked in foil (printed) 6 x 4 = 24 cans on pad, shrinked in foil (printed)