steam unit used for sale

General SKU279X362 MakeS.A. Comesse / CETAL LocationBarneveld CEcheck TypeCodap 2310 cat B2 z=0.85 Steam Generator Pressure Working pressure21 Bar Working pressure shell21 Bar Vacuum possible shellcheck Main Features Heating (medium)Steam Capacity46.6 KW Temp.210 °C Specified Features - Temperature control unit Tube capacity25 l. Max. temperature210 °C Shell diameter140 mm Shell length1700 mm Shell connectionsDN25 Cover connectionsDN25 Temperature control units Temperating machinesteam generator Water heatercheck Electric heating46,6 kW Heating capacity25 l. Temperature210 °C With controlcheck MaterialStainless steel 1.4305 (303) General No.9467 Year of construction2013 Mounted on legscheck Floorspace2,30 x 0,30 m Total height0,93 m Weight60 kg Extra SpecificationsWith Cetal heating tubes, type TPE, power 46.600 kW, 400 V, and control.Oils & fatCon ...

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.

Steam turbine for sale. The turbine was built in 2012, is in good condition and is no longer in operation. Model SST-060 Turbine with impeller in so-called constant-pressure design (action wheel). The turbine rotor is mounted on two bearings and consists of the above-mentioned impeller and a shaft, which are connected to each other by means of Hirth gearing. The impeller is located outside the bearing and consists of one piece. The blades are milled out of the solid disc. Live steam pressure: 13.0 bara at turbine flange Live steam temperature: 191.6 C at turbine flange Live steam flow max: 10,000 kg/h Exhaust steam pressure: 5.2 bara at turbine exhaust flange Turbo generator sound pressure level: 92 dB(A) z 3 dB(A) measured at a distance of 1 m Coupling power: 275kW Total terminal power: The tolerance is 1.0%. 265kWe The pressure drop for the cyclone to be provided shall be ...

Description 9214 - Likwifier jacketed with steam and holding tank Manufactured by WATSON METAL MASTERS INC (USA) Year 2012 A Likwifier is a type of mixer specifically designed to dissolve solids or semi-solids into a liquid, often used in the food industry for tasks like dissolving gums, emulsifiers, and other ingredients in ice cream mixes, sauces, and other food products

Maurer cooking chamber. Twin trolley., 6 trolleys available

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

1. LBBC Autoclave (AC3) Working diam. 600mm (2ft) Working: 1500mm (5ft) Max. working pressure 100 PSI 2. LBBC Autoclave (AC3) Working diam. 750mm (2ft.6”) Working: 1200mm (4ft) Max. working pressure 80 PSI

Giusti, cooking vessel, steam jacketed vessel, 225L, central bottom discharge, stainless lid

Scholz Steam Autoclave Year 1979 7 bar pressure Internal dims: 1.5m diam. x 2.6mm long Temperature 150deg C 10 x steam connectors Indirect steam Full rail system Machine overhauled 2016/17 Full safety certification available Complete with control panel

Safety valve Handtmann DN 32 Steam/ Gas Input DN 25 Output DN 32 Length 270 Material stainless steel 1.4307 Pressure 0.2-2.5 bar

This plant is currently intact and fully connected. The footprint is rectangular and measures approximately 9x5 metres (not including the steam plant, which is in a separate building, adjacent to the brewery). All brewery pipework is stainless steel with clamp-type connectors. The Vessels are all 1,250 litres (except for the glycol tank). - Hot Liquor Tun with level sight. - Mash Tun with wedge-wire filter and powered rakes; inlets for sparge; CIP and Vorlauf. - Combined Copper / Whirlpool with 2 x outlets; exhaust condenser; CIP ball. - Glycol Tank; 2,500 Litres. - 5 x Cylindro-conical, insulated fermenters with CIP, pressure gauge, sample outlet, spunding valve, racking and base outlets. - Side and top-entry access door. - Bright Beer Tank. Spec. as fermenters, but without the conical base. - 2 x Glycol Chillers. - Two Stage Heat Exchanger (water/glycol) with clamp-typ ...

Marel/Stork/Townsend twin spiral hot air/steam oven 600 mm belt Machine in lovely condition direct from major UK factory which stopped producing for fast food chain in 2016.

Conrad Engelke 3m diam. x 2.2m long Autoclave Steam operation Design pressure 7bar Design temp 169deg C Volume 19m3 Length of rotating steel tube 1320mm With new Control Panel Complete with full documentation

LBBC Steam Autoclave Max. working pressure 100psi Max. working temperature 200degC Double ended Steam Operation Double doors at both ends Dims 40” (3ft) diam. x 92” (7ft.6”) long Safe work pressure 7.59 bar Vessel type 95/23 With boiler

2x Tapping back-pressure turbine with spur gearbox and generator Nr1: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 3800 kW Speed: l0000 rpm Steam inlet pressure max. : 37 Steam inlet temperature max. 44 degrees Tapping pressure max. : 24 Tapping temperature : 390 degrees Evaporation pressure : 2 Normal absorption capacity : 27 t/h Maximum absorption capacity : 32 t/h Gearbox Make Voith, St.Pölten Type D 64 Rated power: 5,700 HP Speed 10 OOO/1 5oo rpm Backpressure steam turbine + gearbox + synchronous generator incl. auxiliaries Nr2: Turbine Make: ELIN Type: KR 25 Rated power in relation to the generator terminals: 43oo kW Speed: 9900 rpm Steam inlet pressure max. 24 atü Steam inlet temperature max. 42o 00 Exhaust steam pressure 2 ata Normal absorption capacity 35 t/h Maximum absorption capacity 35.7 t/h Gearbox Make BHS  ...

Steam Turbine 1 and major components Plant part Manufacturer Year of construction techn. data turbine VEB EKM 1970 generator VEB EKM; VEB Bergmann Borsig 1970 31250 kVA x 6,3 kV condenser VEB EKM 1970 Bearing oil plant, pumps, VEB Apparatebau Leisnig-Tragnitz; Filter Cooler VEM, Siemens, VEB EKM and KSB 1969 Steam jet cleaner Wilhelm Wigand ca. 1970 Condensate pumps VEB EKM ca. 1970 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Shrink tunnel for shrinking labels onto bottles, jars, containers. Evenly shrinking of the labels without wrinkling due to the steam process. ? Specifications tunnel: max. product size: ? 100xH220mm | max. Output: 166 container/minute | compressed air: 1bar | power: 220V, 900W | machine dimensions: L2450?W500?H1600mm | weight: 120kg. ? Specifications steam generator: capacity and steam output: 27l, max. 34,4kg/h | steam temperature: 170?C | max. 24kW | compressed air: 7bar | power: 380V | dimensions: 660x420x1230mm | weight: 120kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machine ...

General SKU332X714 MakeKörting Hannover Mach.No.210-4-32860-3 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.210-4-32860-3 Year of construction2014 Mounted on framecheck Floorspace2,80x1,10 m Total height2,10 m Weight1100 kg ATEX designedcheck Extra SpecificationsWith:- seperator tank, volume 125 l.- condenser, volume 140 l., 0/+185°COils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsVacuum pumpsTea, her ...

REF-2721 FIREX TILTING STEAM BOILING PAN WITH MIXER 180 LITRES Brand: FIREX Range: BASKETT Model: PRIV180M Serial no.: 30 LL 18785/2007 Year: 2007 Industrial tilting boiling pan/cooking kettle with indirect heating by steam Equipped with mixer with Teflon scrapers Made of AISI 304 stainless steel Bottom of the cooking vessel made of AISI 316 stainless steel Power: 2 kW Voltage: 220-240 V 1N, 50/60 Hz Vessel dimensions (mm): 700 x 520 (Diameter x Height) Vessel capacity: 180 litres Steam consumption: up to 72 kg/h Mixer adjustable speed: 12-40 RPM Overall dimensions (mm): 1,300 x 1,450 x 1,500 (LxWxH)

General SKU332X715 LocationBarneveld Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell0.5 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features MaterialStainless steel Shell (Material)Stainless steel Tube (Material)Stainless steel Volume235000 Ltr. Motor5.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity235 m³/h With motor5,5kW, 400/690V, 1450 rpm, (Ex) InletDN50 OutletDN50 With jacketcheck Vacuum pumps Heat exchangercheck Horizontalcheck Tube capacity60 l. Number of tubes:64 Tube diameter17 mm Tube length2200 mm Max. temperature0°C/+80°C Shell diameter300 mm Shell length2400 mm Max. temperature0°C/+185°C Shell connectionsDN40 Cover connectionsDN80 Specified Features - Vacuum pump MaterialStainless steel 1.4571 (316Ti) General MakeKörting Hannover Mach.No.210-4-32860- ...

General SKU221Y082 LocationBarneveld Specified Features - Miscellaneous Capacity102 kg/h Capacity50 l. With jacketcheck General MakeJordan SerialT5-75.1289/B-21 Year of construction2021 Extra SpecificationsSteam GeneratorPerformance: 75 kWSteam capacity: 102 kg/hOperating pressure: 10 barwith a 50 l. vessel: pressure 11 bar, 5—188 °CMiscellaneousOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicJordanMiscellaneous > MiscellaneousIndustries > Foo ...

General SKUR0371 MakeGPI Tanks &: Process Equipment LocationBarneveld CEcheck Type30 m3 vacuum steam distillation vessel Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume29900 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity25000 l (29500 l brut volume Vessel sizesdia. 2500 x 6975mm Dished bottomcheck Dished top sidecheck Top connections(11x) Outletdia. 80 mm Internal heating spiral(5x 80 Ltr) Max. temperature-20/+220 Degr. C. With paddle stirrercheck Motor7,5 kW (400 V, 1440 rpm (Ex)) With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) General No.317233-10 Year of construction2018 Floorspace2,9 x 2,9 m Total height8,3 m Weight6.850 kg (vessel weight without agitator) Extra Specificatio ...

Scholz 4100mm long x 2500m diam. Autoclave Manufacturer: Scholz Direct steam PS 7.5 bar Temperature 170deg C Year 2003 CE marked With modern Control Panel

General SKU042Y538 MakeStilmas TypePSG-500 DTS No.3797/86 Year of construction1986 Mounted on framecheck Pressure Working pressure10 Bar Working pressure jacket10 Bar Working pressure tubes6 Bar Main Features Capacity1.35 Ltr./Hr. Specified Features - Distillation Distillation installationPure Steam Generator Vessel sizesø 320 x 1800: ø 280 x 1300 mm Number of columns:2 Electric heatedcheck MaterialStainless steel 1.4401 (316) General LocationBarneveld With switchgear(as is) Floorspace1,5 x 0,7 m Total height2,7 m Weight600 kg Extra SpecificationsStilmas Pure Steam Generator type PSG-500 DTS produces saturated, dry, pyrogen-free pure steam, used as heating fluid for industrial systems.Pure steam production: adjustable (operating range stated) up to 8 bar.Steam consumption (heating steam to pure steam): 1.35 kg/kg of pure steam.Oils & fatDistillationFine chemic ...

Buffing unit - 1 motor

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 16 cooling units are available. All 16 cooling units fit into a 40Hc container for transport.

Danmatic Decor Unit 900 topping conveyor 2018, Stainless, décor unit 900, is designed for decoration of buns, rolls, full dough sheet products and more, brand new HMI touch screen Siemens panel, belt dimensions 2600mm x 880mm, mobile, 3Ph

Gluing unit IMA complete with double coil magazine, glue application device and pressure zone

Oscillating buffing unit HOMAG

HAVE A GDY SIR; WE VE 3 PCS USED WOODWARD 733 CONTROL UNITS. AT OUR STOCK PART NO 8237-1177 REVISION B 3PCS WE 1 PC USED WOODWARD LS-5 CONTROL UNIT PART NO 8440 - 2077 A IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Tetra Top Granulate Supply Unit (GSU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including side channel blower and vacuumpump from Gardner Denver, G-BH1 2BH1510-7HH57, 4 kW - 345 / 415 V - 50 Hz - 2.920 rpm, pressure: 390 - 440 mbar and control panel with Allen-Bradly PLC., Type of Machine: Granulate Supply Unit, Capacity: 9.000 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0500, Drawing spec.: C-1025041-0500, Weight: ± 250 kg

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

Overview  This carbonator from German manufacturer Unitec GmbH was built in 2001. It was installed between flash pasteurizer and filler. The buffer tank, which is included in the scope as used as a sterile buffer tank between carbonator and filler. The juice factory is planning a completely new processing plant and filler, therefore this equipment is available.  Technical Details  Capacity: 13,000 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels 0-8 g/l CO2 8200 l buffer tank CO2 content can be adjusted on control panel Siemens S7 control panel Level regulation in the buffer tank was done by flash pasteurizer PLC and would need to be integrated into carbonator plc

Intake manifold Ø 160 mm Rated speed 2,890 rpm Nominal flow rate 1,448 m³/h Negative pressure at V nominal: 2,503 Pa Rated current 4.2 A Motor power 2.2 kW Weight approx. 340 kg Connection 400V/3~/50Hz Fuse 16A Filter 85100301 Cat M Filter Regeneration: Hand Shaking

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Nakata Zoki Kobe, Japan (Troester design) Duplex Extruder Unit Dual 150mm dia PIN Type Extruders, Year of manufacture: 1990, with Roller Feed, and duplex Die. L/D ratio 16:1 Number of Pins: 10 Rows x 8 Pieces, Spare Pins included. Screw Speed 45 r.p.m. Motors 185kw D.C. variable speed, 415 volt, 3ph, 50hz. Full Books and Drawings available. Thyristor Drives included. Starter and Control Panel for Lower Extruder only. Die usable Width 18\\, In good condition.

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Qty. 1 Second-hand recoiler Mfc.: United Type: Q610 mm Built: 1958 Model: Reversing Coiler right to left Capacity: Max. 45 ton

Key data: 125

3 x GE CALNETIX HEAT TO POWER ORC GENERATOR Model: X2 Year: 2011 Hours: 10,000 Capacity: 125 kW Condition: Good. Operated on full maintenance contract Scope: Complete ORC unit Price: €80,000 each Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange . Yours sincerely, Edward Dulake Tel: (+44) 07595 426 731 Gas Engine Exchange Ltd

Factory-powered LuefterMotor Umwaelzmotor for Unitherm am Lager! Immediately available! with performance; Immediately available

Seidenader T&T Single Unit Track & Trace System for marking and verification of folding boxes/cartons for serialisation and aggregation (Track&Trace), the product codes and variable data (serial no., batch no., expiry date, datamatrix codes, French codes, etc.) printed on the folding cartons are verified via a camera for accuracy and quality, including Wolke m600 advanced Ink jet printer using HP ink cartridges (height of printing max. 12.7 mm), 1 (one) printing station with 2 (two) printing heads located on the back side, infeed conveyor with a length of approx. 300 mm and a width of approx. 185 mm, transfer unit with lower belt and adjustable upper belt for precise and reliable product transfer, carton length (in the direction of travel) max. 220 mm, carton width max. 200 mm, direction of travel from left to right, handheld scanner, electrics 230V + N + PE /50 Hz/1,0 kW, machine floor  ...

Laminator 380 Plus • Automatic feeder with suction head • Inlet stacker • Automatic sheet separator • Film trimming device (includes cutting and trimming blade) • Chrome plated rolling roll •Touch screen • Anti-bend system • Fans for cooling after the grille • Stamping system included used foil rewinder • Hydraulic rolling roller pressure Specifications: Maximum film reel size: 0.75 x 4000 m Film thickness: 23 – 42 μm Film mandrel shaft: Ø75 mm Maximum film reel diameter: Ø340 mm Material Weight: Digital printing paper: 135 – 350 g/m² Other paper: 157 – 350 g/m² Maximum format: 390 x 520 mm Minimum format: 200 x 300 mm Maximum speed: Up to 15 m/min Top rolling roll diameter: Ø120 mm (chrome plated and polished) Lower rolling roll diameter: Ø80 mm (silicone) Accuracy: ±2mm Power: 3200 W Electrical voltage: 200-240VAC – 5 ...

Serialization system for packaging line: suitable for the printing of code data on the cartons. Incl. camera vision system, bad ejection and data management system etc.

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1

MJ UNI-MIS 037-000 Scope of delivery of the CT Scan Unit: Separation of the CT control room from the CT examination room by lead glass pane Patient access corridor Separate air conditioning in the CT room, control room and corridor Hygiene concept All 3 areas have their own ventilation (CT room, control room and corridor). The control room (seat of the MTRA for CT operation) is ventilated from the outside. The air in the control room has overpressure and escapes into the corridor. The CT room has its own ventilation from the outside, air escapes back to the outside, and the air flow is in balance. The corridor also has its own ventilation. Door widths 90 cm. A step to enter the container. Technical questions from the customer: Where is the exact exit and entry point for the network and electrical equipment at the container? Container door (short container side)  ...

Labelling unit Etiquette unit complete wth pneumatics